'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Metal Processing

          Machinelist: Metal Processing


          Center Lathe

          used Metal Processing Center Lathe WEILER Condor VS 2


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-012198 · Center Lathe

          WEILER - Condor VS 2 - - 1981 -

          Technical details
          turning diameter over bed 330 mm︱turning diameter over slide rest 170 mm︱turning length 800 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 ︱spindle turning speed - stepless 24 - 2800 U/min︱linear traverse of table 0,026 - 1,253 mm︱feeds crossrail-slide horizontal 0,013 - 0,628 mm/U︱quill stroke 120 mm︱total power requirement 2,4 / 3,0 kW︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 1,85 x 0,8 x 1,7 m︱3-jaw chuck ︱Qick Toolholders ︱Machine Lamp ︱chip protection wall ︱Lining protection hood ︱Coolant System
          The machine comes from a training company and was maintained more than needed. The general condition is very good, all functions have been checked.
            turning diameter over bed 330 mm
            turning diameter over slide rest 170 mm
            turning length 800 mm
            spindle bore 38 mm
            tailstock quill taper MT 3
            spindle turning speed - stepless 24 - 2800 U/min
            linear traverse of table 0,026 - 1,253 mm
            feeds crossrail-slide horizontal 0,013 - 0,628 mm/U
            quill stroke 120 mm
            total power requirement 2,4 / 3,0 kW
            weight of the machine ca. 850 kg
            dimensions of the machine ca. 1,85 x 0,8 x 1,7 m
            Description :
            The machine comes from a training company and was maintained more than needed.
            The general condition is very good, all functions have been checked.
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe WEIPERT W 631


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-012194 · Center Lathe

          WEIPERT - W 631 - - 1974 -

          Technical details
          turning diameter over bed 720 mm︱turning diameter over slide rest 500 mm︱turning length 1000 mm︱spindle turning speed range 7.1 - 1800 U/min︱feeds - fine adjustment 6 - 6,28 mm/U︱feeds crossrail-slide horizontal 0,005 - 6,28 mm/U︱spindle drive 15 kW︱centre height 360 mm︱spindle bore 82 mm︱total power requirement 28 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,8 x 1,4 x 1,8 m︱3-jaw chuck 315 mm︱Qick Toolholders Multifix GR. 8 ︱Digital Read Out Acu-Rite ︱Face plate 600 mm︱motorized top slide
            turning diameter over bed 720 mm
            turning diameter over slide rest 500 mm
            turning length 1000 mm
            spindle turning speed range 7.1 - 1800 U/min
            feeds - fine adjustment 6 - 6,28 mm/U
            feeds crossrail-slide horizontal 0,005 - 6,28 mm/U
            spindle drive 15 kW
            centre height 360 mm
            spindle bore 82 mm
            total power requirement 28 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,8 x 1,4 x 1,8 m
            3-jaw chuck 315 mm
            Qick Toolholders Multifix GR. 8
            Digital Read Out Acu-Rite
            Face plate 600 mm
          Datasheet
          Request / Contact
          used Metal Processing Center Lathe Weipert WG 425


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-012197 · Center Lathe

          Weipert - WG 425 - - 1971 -

          Technical details
          turning diameter over bed 440 mm︱turning diameter over slide rest 250 mm︱turning length 1000 mm︱spindle bore 62 mm︱spindle speed: 124 - 1400 ︱tailstock quill taper MT 4 ︱quill stroke 160 mm︱metrical thread cutting 0,5 - 112 mm/U︱thread - inch 1/4 - 56 inch.︱total power requirement 7,5 kW︱weight of the machine ca. 2,4 t︱dimensions of the machine ca. 2,6 x 1,1 x 1,50 m︱Qick Toolholders ︱Face plate ︱3-jaw-chuck diameter
          Weipert precision guide and spindle lathe WG 425 The machine comes from a training company and has been maintained more than second hand. The general condition is very good, all functions have been checked.
            turning diameter over bed 440 mm
            turning diameter over slide rest 250 mm
            turning length 1000 mm
            spindle bore 62 mm
            spindle speed: 124 - 1400
            tailstock quill taper MT 4
            quill stroke 160 mm
            metrical thread cutting 0,5 - 112 mm/U
            thread - inch 1/4 - 56 inch.
            total power requirement 7,5 kW
            weight of the machine ca. 2,4 t
            dimensions of the machine ca. 2,6 x 1,1 x 1,50 m
            Description :
            Weipert precision guide and spindle lathe WG 425
            The machine comes from a training company and has been maintained more than
            second hand.
            The general condition is very good, all functions have been checked.
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used Metal Processing Pillar Drilling Machine FLOTT SB 32 ST


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-032227 · Pillar Drilling Machine

          FLOTT - SB 32 ST - - 1993 -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 300 mm︱bore stroke 150 mm︱bore capacity in cast iron 36 mm︱spindle taper MT 3 ︱spindle turning speed - stepless 140 - 1400 U/min︱table-size 500 x 360 mm︱column diameter 125 mm︱total power requirement 1,5 kW︱weight of the machine ca. 335 kg︱dimensions of the machine ca. 500 x 800 x 1850 mm︱
          The machine comes from a training company and has been maintained more than second hand. The general condition is very good, all functions have been checked. Accesories: - Drill chuck - infinitely variable speeds - lighting
            bore capacity in steel (diameter. 32 mm
            throat 300 mm
            bore stroke 150 mm
            bore capacity in cast iron 36 mm
            spindle taper MT 3
            spindle turning speed - stepless 140 - 1400 U/min
            table-size 500 x 360 mm
            column diameter 125 mm
            total power requirement 1,5 kW
            weight of the machine ca. 335 kg
            dimensions of the machine ca. 500 x 800 x 1850 mm
            Description :
            The machine comes from a training company and has been maintained more than
            second hand.
            The general condition is very good, all functions have been checked.

            Accesories:
            - Drill chuck
            - infinitely variable speeds
            - lighting
          Datasheet
          Request / Contact
          used Metal Processing Pillar Drilling Machine ALZMETALL AB 3 ES


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-032228 · Pillar Drilling Machine

          ALZMETALL - AB 3 ES - - 1981 -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 295 mm︱bore stroke 160 mm︱spindle turning speed - stepless 110 - 2900 U/min︱column diameter 115 mm︱table-size 400 x 300 mm︱spindle taper MT 3 ︱bore capacity in cast iron 40 mm︱total power requirement 1,2 kW︱weight of the machine ca. 330 kg︱dimensions of the machine ca. 700 x 900 x 1850 mm︱
            bore capacity in steel (diameter. 32 mm
            throat 295 mm
            bore stroke 160 mm
            spindle turning speed - stepless 110 - 2900 U/min
            column diameter 115 mm
            table-size 400 x 300 mm
            spindle taper MT 3
            bore capacity in cast iron 40 mm
            total power requirement 1,2 kW
            weight of the machine ca. 330 kg
            dimensions of the machine ca. 700 x 900 x 1850 mm
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used Metal Processing Radial Drilling Machine WEBO BR 55 H / 2000


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-032224 · Radial Drilling Machine

          WEBO - BR 55 H / 2000 - - 1985 -

          Technical details
          Boring power 55 mm︱dia. of quill 110 mm︱throat 2000 mm︱workpiece height max. 1100 mm︱feed 0,05-2,5 mm/U︱surface area 2000 x 1100 mm︱spindle turning speed range 14-1000 U/min︱ 800 x 500 x 500 mm︱cross rail - adjustment 1290 mm︱distance ground floor - spindle 900 - 1600 mm︱cut-off range 250-1290 mm︱total power requirement 11 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 2,9 x 1,1 x 2,9 m︱
            Boring power 55 mm
            dia. of quill 110 mm
            throat 2000 mm
            workpiece height max. 1100 mm
            feed 0,05-2,5 mm/U
            surface area 2000 x 1100 mm
            spindle turning speed range 14-1000 U/min
            800 x 500 x 500 mm
            cross rail - adjustment 1290 mm
            distance ground floor - spindle 900 - 1600 mm
            cut-off range 250-1290 mm
            total power requirement 11 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 2,9 x 1,1 x 2,9 m
          Datasheet
          Request / Contact
          used Metal Processing Radial Drilling Machine RABOMA 12 Uh 2000


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-032022 · Radial Drilling Machine

          RABOMA - 12 Uh 2000 - - 1968 -

          Technical details
          bore capacity in steel (diameter) 55 mm︱arm length 2055 mm︱spindle taper MT 5 ︱spindle turning speed range 11,2 - 1400 U/min︱column diameter 450 mm︱spindle stroke - max. 540 mm︱feed motor 0,037 - 2,0 kW︱total power requirement 4 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 2580 x 1100 x 3450 mm m︱ 1000 x 1000 x 490 mm︱
            bore capacity in steel (diameter. 55 mm
            arm length 2055 mm
            spindle taper MT 5
            spindle turning speed range 11,2 - 1400 U/min
            column diameter 450 mm
            spindle stroke - max. 540 mm
            feed motor 0,037 - 2,0 kW
            total power requirement 4 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 2580 x 1100 x 3450 mm m
            1000 x 1000 x 490 mm
          Datasheet
          Request / Contact

          Knee-and-Column Milling Machine - vert.

          used Metal Processing Knee-and-Column Milling Machine - vert. KLOPP-KORRADI FS 11


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-022010 · Knee-and-Column Milling Machine - vert.

          KLOPP-KORRADI - FS 11 - - 1974 -

          Technical details
          x-travel 700 mm︱y-travel 350 mm︱z-travel 450 mm︱table-size 1100 x 300 mm︱spindle turning speed range 31,5 - 1400 U/min︱feed - longitudinal/cross 12,5 - 630 mm/min︱rapid traverse longitudinal and cross 2500 m/min︱feed range - vertical 1250 mm/min︱spindle taper: SK 40 ︱total power requirement 7 kW︱weight of the machine ca. 2,2 t︱dimensions of the machine ca. 1,6 x 1,8 x 1,8 m︱
          The machine comes from a training company and has been maintained more than second hand. The general condition is according to the age, very good, all functions have been checked.
            x-travel 700 mm
            y-travel 350 mm
            z-travel 450 mm
            table-size 1100 x 300 mm
            spindle turning speed range 31,5 - 1400 U/min
            feed - longitudinal/cross 12,5 - 630 mm/min
            rapid traverse longitudinal and . 2500 m/min
            feed range - vertical 1250 mm/min
            spindle taper: SK 40
            total power requirement 7 kW
            weight of the machine ca. 2,2 t
            dimensions of the machine ca. 1,6 x 1,8 x 1,8 m
            Description :
            The machine comes from a training company and has been maintained more than
            second hand.
            The general condition is according to the age, very good, all functions have been checked.
          Datasheet
          Request / Contact

          milling machining centers - universal

          used Metal Processing milling machining centers - universal DONAU DANUSYS 1510


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-022223 · milling machining centers - universal

          DONAU - DANUSYS 1510 - - 1999 - MITSUBISHI MMI

          Technical details
          x-travel 1500 mm︱y-travel 1000 mm︱z-travel 700 mm︱number of tools 8 ︱spindle turning speed range 4200 U/min︱table-size 1500 x 1000 mm︱capacity 20 kVA︱rapid traverse longitudinal and cross 30 m/min︱rapid traverse Z-axis 20 m/min︱tool taper SK 40 ︱Boring power 40 mm︱thread - module 24 mm︱Control MITSUBISHI MMI ︱table height 780 mm︱max. dist. between floorpl. and spindle-nose 670 - 1320 mm︱max. distance between table and spindle-nose 180 - 830 mm︱total power requirement 11 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3,9 x 2,2 x 3,27 m︱Chip Conveyor
            x-travel 1500 mm
            y-travel 1000 mm
            z-travel 700 mm
            number of tools 8
            spindle turning speed range 4200 U/min
            table-size 1500 x 1000 mm
            capacity 20 kVA
            rapid traverse longitudinal and . 30 m/min
            rapid traverse Z-axis 20 m/min
            tool taper SK 40
            Boring power 40 mm
            thread - module 24 mm
            Control MITSUBISHI MMI
            table height 780 mm
            max. dist. between floorpl. and . 670 - 1320 mm
            max. distance between table and . 180 - 830 mm
            total power requirement 11 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3,9 x 2,2 x 3,27 m
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used Metal Processing milling machining centers - vertical HURON KX 30


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-022224 · milling machining centers - vertical

          HURON - KX 30 - - 2001 - Siemens

          Technical details
          x-travel 1800 mm︱y-travel 1000 mm︱z-travel 550 mm︱rapid traverse X- and Y-axis 30 m/min︱rapid traverse Z-axis 18 m/min︱table-size 2000 x 1000 mm︱table load 2,5 t︱spindle speed: 42000 Upm︱no. of tools in the magazine 36 Stück︱max. tool diameter 100 mm︱max. tool length 300 mm︱max. workpiece weight 10 kg︱positioning accuracy X: 0,009 Y/Z 0,007 mm︱repeating accuracy 0,005 mm︱Control Siemens ︱total power requirement 30 kW︱weight of the machine ca. 17 t︱dimensions of the machine ca. 5,77 x 6,42 x 3,43 m︱
          This product range combines dynamism with precision and enables surfaces first-class quality, especially in the 3D production of shapes / Forgings and tools. Key Features: _ Ribbed cast structure with excellent mechanical properties and high Stiffness - Excellent damping of vibrations in demanding cutting processes - Floor anchoring for long-term high geometric stability and precision Equipment: _ LTA extraction system, belt filter, - cooling device, - chip conveyor IRODEX, - separate vacuum clamping table approx. 1500x1000 mm, - DONALDSON SD0080AP-CV refrigeration dryer, with pressure vessel
            x-travel 1800 mm
            y-travel 1000 mm
            z-travel 550 mm
            rapid traverse X- and Y-axis 30 m/min
            rapid traverse Z-axis 18 m/min
            table-size 2000 x 1000 mm
            table load 2,5 t
            spindle speed: 42000 Upm
            no. of tools in the magazine 36 Stück
            max. tool diameter 100 mm
            max. tool length 300 mm
            max. workpiece weight 10 kg
            positioning accuracy X: 0,009 Y/Z 0,007 mm
            repeating accuracy 0,005 mm
            Control Siemens
            total power requirement 30 kW
            weight of the machine ca. 17 t
            dimensions of the machine ca. 5,77 x 6,42 x 3,43 m
            Description :
            This product range combines dynamism with precision and enables surfaces
            first-class quality, especially in the 3D production of shapes /
            Forgings and tools.

            Key Features:
            _ Ribbed cast structure with excellent mechanical properties and high
            Stiffness
            - Excellent damping of vibrations in demanding cutting processes
            - Floor anchoring for long-term high geometric stability and precision

            Equipment:
            _ LTA extraction system, belt filter,
            - cooling device,
            - chip conveyor IRODEX,
            - separate vacuum clamping table approx. 1500x1000 mm,
            - DONALDSON SD0080AP-CV refrigeration dryer, with pressure vessel
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used Metal Processing Tool Room Milling Machine - Universal MIKRON WF 71 D


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-022009 · Tool Room Milling Machine - Universal

          MIKRON - WF 71 D - - 1999 - Heidenhain TNC 415

          Technical details
          x-travel 900 mm︱y-travel 500 mm︱z-travel 500 mm︱Control Heidenhain TNC 415 ︱mx. distance bet.vert. milling head and table 604 ︱feed speeds infinitely variable 2 - 3000 mm/min︱rapid traverse X- and Y-axis 6000 m/min︱rapid traverse Z-axis 4000 m/min︱turning speeds: 21 ︱spindle turning speed range 40 - 4000 U/min︱spindle taper: ISO 40 / M16 ︱quill stroke 90 mm︱table dimension - longitudinal 500 x 1000 mm︱number of T-slots 7 ︱workpiece weight 500 kg︱0 13,5 kw︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. m︱
            x-travel 900 mm
            y-travel 500 mm
            z-travel 500 mm
            Control Heidenhain TNC 415
            mx. distance bet.vert. milling h. 604
            feed speeds infinitely variable 2 - 3000 mm/min
            rapid traverse X- and Y-axis 6000 m/min
            rapid traverse Z-axis 4000 m/min
            turning speeds: 21
            spindle turning speed range 40 - 4000 U/min
            spindle taper: ISO 40 / M16
            quill stroke 90 mm
            table dimension - longitudinal 500 x 1000 mm
            number of T-slots 7
            workpiece weight 500 kg
            0 13,5 kw
            weight of the machine ca. 3,5 t
          Datasheet
          Request / Contact

          Universal Milling and Boring Machine

          used Metal Processing Universal Milling and Boring Machine Stimin / Volz FUS 32


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-022226 · Universal Milling and Boring Machine

          Stimin / Volz - FUS 32 - - 2009 -

          Technical details
          x-travel 560 mm︱y-travel 320 mm︱z-travel 400 mm︱spindle taper ISO 40 ︱spindle turning speed range 25 - 2000 U/min︱table-size 950 x 450 mm︱total power requirement 2,8 kW︱weight of the machine ca. 1,65 t︱dimensions of the machine ca. 1,48x1,15x1,78 m︱
          The machine comes from a training company and was maintained more than needed. The general condition is very good, all functions have been checked. Accesories: Ball screws for X, Y and Z axes Vertical milling head with drawbar fixed box table 950 x 450 mm Coolant system complete with pump and fittings Protective bellows on the vertical stand guide, with stainless steel slat cover Bellows for transverse spindle Counterholder block for horizontal milling Pull-in rod for horizontal milling spindle, built-in, with side actuation Control panel with emergency stop switch, swivelling Drawbar M 16, for DIN tools Central lubrication with interval control Chip collection tray Lighting 24 volts, halogen lockable main switch Instruction manual and protocol
            x-travel 560 mm
            y-travel 320 mm
            z-travel 400 mm
            spindle taper ISO 40
            spindle turning speed range 25 - 2000 U/min
            table-size 950 x 450 mm
            total power requirement 2,8 kW
            weight of the machine ca. 1,65 t
            dimensions of the machine ca. 1,48x1,15x1,78 m
            Description :
            The machine comes from a training company and was maintained more than needed.
            The general condition is very good, all functions have been checked.

            Accesories:

            Ball screws for X, Y and Z axes
            Vertical milling head with drawbar
            fixed box table 950 x 450 mm
            Coolant system complete with pump and fittings
            Protective bellows on the vertical stand guide, with stainless steel
            slat cover
            Bellows for transverse spindle
            Counterholder block for horizontal milling
            Pull-in rod for horizontal milling spindle, built-in, with side actuation
            Control panel with emergency stop switch, swivelling
            Drawbar M 16, for DIN tools
            Central lubrication with interval control
            Chip collection tray
            Lighting 24 volts, halogen
            lockable main switch
            Instruction manual and protocol
          Datasheet
          Request / Contact

          Cylindrical Grinding Machine - Universal

          used Metal Processing Cylindrical Grinding Machine - Universal SCHAUDT RFH 300


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-072029 · Cylindrical Grinding Machine - Universal

          SCHAUDT - RFH 300 - - 1971 -

          Technical details
          grinding diameter 200 mm︱grinding length 350 mm︱centre height 100 mm︱max. dia. of grinding wheel 300 mm︱max. width of grinding wheel 60 mm︱transmission ratio 3 ︱spindle turning speed range 2225 - 2500 - 2815 U/min︱head swivability 90 °︱taper angle 10° / 30° Grad︱workpiece turning speeds 8 / 30 - 750 U/min︱spindle cone MT 4 ︱inner taper MT 3 ︱quill stroke 30 mm︱total power requirement 4,5 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 1,6 x 1,4 x 1,6 m︱
            grinding diameter 200 mm
            grinding length 350 mm
            centre height 100 mm
            max. dia. of grinding wheel 300 mm
            max. width of grinding wheel 60 mm
            transmission ratio 3
            spindle turning speed range 2225 - 2500 - 2815 U/min
            head swivability 90 °
            taper angle 10° / 30° Grad
            workpiece turning speeds 8 / 30 - 750 U/min
            spindle cone MT 4
            inner taper MT 3
            quill stroke 30 mm
            total power requirement 4,5 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 1,6 x 1,4 x 1,6 m
          Datasheet
          Request / Contact

          Spiral drill grinder

          used Metal Processing Spiral drill grinder KIRSCHBAUM UG 2


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-072028 · Spiral drill grinder

          KIRSCHBAUM - UG 2 - - 1972 -

          Technical details
          voltage 380 V︱range L-W-H 430 x 430 x 1250 mm︱power capacity - grinding motor 0,75 kW︱weight 73 kg︱
            voltage 380 V
            range L-W-H 430 x 430 x 1250 mm
            power capacity - grinding motor 0,75 kW
            weight 73 kg
          Datasheet
          Request / Contact

          Band Saw - Vertical

          used Metal Processing Band Saw - Vertical HESKA ESB 3


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-052123 · Band Saw - Vertical

          HESKA - ESB 3 - - 2000 -

          Technical details
          roll diameter 300 mm︱throat 300 mm︱workpiece height 156 mm︱table-size 500 x 500 mm︱total power requirement 0,75 kW︱weight of the machine ca. ca. 200 kg︱dimensions of the machine ca. 0,9 x 0,6 x 1,65 m︱saw band welder IDEAL BSO 16
            roll diameter 300 mm
            throat 300 mm
            workpiece height 156 mm
            table-size 500 x 500 mm
            total power requirement 0,75 kW
            weight of the machine ca. ca. 200 kg
            dimensions of the machine ca. 0,9 x 0,6 x 1,65 m
            saw band welder IDEAL BSO 16
          Datasheet
          Request / Contact

          Bandsaw - Horizontal

          used Metal Processing Bandsaw - Horizontal BAUER S 350


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-052124 · Bandsaw - Horizontal

          BAUER - S 350 - - ca. 1980 -

          Technical details
          cutting diameter 350 mm︱saw band length 3900 mm︱cutting width 450 mm︱ 350 mm︱capacity 90 degrees: flat 450 x 280 mm︱ 350 x 350 mm︱band speed 20 / 35 / 50 / 70 m/min︱dimensions of saw-band 3900 x 27 x 0,9 mm︱total power requirement 1,1 kW︱weight of the machine ca. 0,46 t︱dimensions of the machine ca. 2050x850x1300 mm︱
            cutting diameter 350 mm
            saw band length 3900 mm
            cutting width 450 mm
            350 mm
            capacity 90 degrees: flat 450 x 280 mm
            350 x 350 mm
            band speed 20 / 35 / 50 / 70 m/min
            dimensions of saw-band 3900 x 27 x 0,9 mm
            total power requirement 1,1 kW
            weight of the machine ca. 0,46 t
            dimensions of the machine ca. 2050x850x1300 mm
          Datasheet
          Request / Contact
          used Metal Processing Bandsaw - Horizontal BOMAR STG 225.160 G


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-052125 · Bandsaw - Horizontal

          BOMAR - STG 225.160 G - - 2003 -

          Technical details
          cutting diameter 165 mm︱saw band length 2400 x 0,90 x 20 mm︱cutting width 225 mm︱band speed 35 7 70 m/min︱Capacity 90° rectangular 225 x 160 mm︱ 225 x 160 mm︱ 165 x 165 mm︱ 165 mm︱Capacity 90° rectangular 170 x 100 mm︱ 155 x 155 mm︱ 155 x 155 mm︱capacity 60 degrees: round 65 mm︱capacity 60 degrees: flat 110 y 60 mm︱capacity 60 degrees: square 60 x 60 mm︱total power requirement kW︱weight of the machine ca. 150 kg︱dimensions of the machine ca. 1100 x 450 x 1350 mm︱base ︱Coolant System ︱pneumatic clamping
          manual band saw machine for industrial work developed.
            cutting diameter 165 mm
            saw band length 2400 x 0,90 x 20 mm
            cutting width 225 mm
            band speed 35 7 70 m/min
            Capacity 90° rectangular 225 x 160 mm
            225 x 160 mm
            165 x 165 mm
            165 mm
            Capacity 90° rectangular 170 x 100 mm
            155 x 155 mm
            155 x 155 mm
            capacity 60 degrees: round 65 mm
            capacity 60 degrees: flat 110 y 60 mm
            capacity 60 degrees: square 60 x 60 mm
            weight of the machine ca. 150 kg
            dimensions of the machine ca. 1100 x 450 x 1350 mm
            Description :
            manual band saw machine for industrial work
            developed.
          Datasheet
          Request / Contact
          used Metal Processing Bandsaw - Horizontal KASTO SBL 280 U


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-052107 · Bandsaw - Horizontal

          KASTO - SBL 280 U - - 1995 -

          Technical details
          cutting diameter 280 mm︱saw band length 3830 x 25 x 0,9 mm︱cutting width 360 x 180 mm︱ 180 x 180 mm︱Capacity 45° rectangular 260 x 180 mm︱ 180 mm︱ 280 x 280 mm︱cutting speed 19 - 110 m/min︱coolant tank 35 l︱Capacity 16 l/min︱total power requirement 2,0 kW︱weight of the machine ca. 0,44 t︱dimensions of the machine ca. 2,8 x 0,85 x 2,35 m︱Saw Band
            cutting diameter 280 mm
            saw band length 3830 x 25 x 0,9 mm
            cutting width 360 x 180 mm
            180 x 180 mm
            Capacity 45° rectangular 260 x 180 mm
            180 mm
            280 x 280 mm
            cutting speed 19 - 110 m/min
            coolant tank 35 l
            Capacity 16 l/min
            total power requirement 2,0 kW
            weight of the machine ca. 0,44 t
            dimensions of the machine ca. 2,8 x 0,85 x 2,35 m
          Datasheet
          Request / Contact

          Punching Press

          used Metal Processing Punching Press MUHR & BENDER KBL 13


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-092045 · Punching Press

          MUHR & BENDER - KBL 13 - - 1977 -

          Technical details
          pressure 50 t︱ 150 x 16 mm︱stroke 28 mm︱ 12 mm︱plate length 250 mm︱square edge steel 45 mm︱round bar steel 50 mm︱sheet thickness 13 mm︱total power requirement 3,5 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 1,8 x 1,0 x 1,6 m︱
            pressure 50 t
            150 x 16 mm
            stroke 28 mm
            12 mm
            plate length 250 mm
            square edge steel 45 mm
            round bar steel 50 mm
            sheet thickness 13 mm
            total power requirement 3,5 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 1,8 x 1,0 x 1,6 m
          Datasheet
          Request / Contact

          Eccentric Press - Single Column

          used Metal Processing Eccentric Press - Single Column IWK Pressen PEERS 63


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-082035 · Eccentric Press - Single Column

          IWK Pressen - PEERS 63 - - 1970 -

          Technical details
          pressure 63 t︱throat 235 mm︱stroke 6 - 100 mm︱no. of strokes 60 Hub/min︱dayligth 270 mm︱distance table - lower edge of ram 370 mm︱ram adjustment 80 mm︱table-size 650 x 600 mm︱ram head dimension 180 x 230 mm︱work height max. 700 mm︱table hole 110 mm︱total power requirement 4,0 kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. m︱
          This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Profi Press features a central motorized lubrication system, overload protection and an electropneumatic clutch-brake combination. RHTC produces this eccentric press machine in Europe and we deliver all these presses in accordance with the latest CE standards. High quality guaranteed! Features of this eccentric press machine - Central motorized lubrication system to guarantee a perfect performance and maintenance - Hydraulic overload protection to protect the machine components and installed tools - Electro-pneumatic clutch and brake combination equipped with a dual safety solenoid valve. This system includes a compensation tank, a regulator- lubrication filter and a pressure control switch. - Two lateral protection screens with level IV safety light guards - Programmable control system (PLC) - Adjustable stroke - Anti-vibration pads - Operation by means of two-hands control as well as a foot pedal Optional accessories: - Inverter (speed variation) - Pneumatic or hydraulic die ejector or cushion - Lower auxiliar table - Strain gauge system - NC digital display with memories to save various working cycles
            pressure 63 t
            throat 235 mm
            stroke 6 - 100 mm
            no. of strokes 60 Hub/min
            dayligth 270 mm
            distance table - lower edge of r. 370 mm
            ram adjustment 80 mm
            table-size 650 x 600 mm
            ram head dimension 180 x 230 mm
            work height max. 700 mm
            table hole 110 mm
            total power requirement 4,0 kW
            weight of the machine ca. 3,5 t
            Description :
            This eccentric press machine with 80 ton capacity is suitable to carry out
            tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press
            mechanical presses can be used for various applications in many different
            industries: the automotive, railway and aerospace industries (for example) and
            many more related industries that use metal forming.

            Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of
            high-strength forged steel and high-performance alloy bushings. This high
            performance Profi Press features a central motorized lubrication system,
            overload protection and an electropneumatic clutch-brake combination.

            RHTC produces this eccentric press machine in Europe and we deliver all these
            presses in accordance with the latest CE standards. High quality guaranteed!

            Features of this eccentric press machine
            - Central motorized lubrication system to guarantee a perfect performance and
            maintenance
            - Hydraulic overload protection to protect the machine components and installed
            tools
            - Electro-pneumatic clutch and brake combination equipped with a dual safety
            solenoid valve. This system includes a compensation tank, a regulator-
            lubrication filter and a pressure control switch.
            - Two lateral protection screens with level IV safety light guards
            - Programmable control system (PLC)
            - Adjustable stroke
            - Anti-vibration pads
            - Operation by means of two-hands control as well as a foot pedal

            Optional accessories:
            - Inverter (speed variation)
            - Pneumatic or hydraulic die ejector or cushion
            - Lower auxiliar table
            - Strain gauge system
            - NC digital display with memories to save various working cycles
          Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used Metal Processing Plate Shear - Mechanical DURMAZLAR RGM 2550 x 2,5


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-092052 · Plate Shear - Mechanical

          DURMAZLAR - RGM 2550 x 2,5 - - 1996 -

          Technical details
          sheet width 2500 mm︱plate thickness 2,5 mm︱distance between columns 2550 mm︱cutting angle 1,5 °︱cutting strokes max. 35 p.Min.︱back stop - adjustable 500 mm︱total power requirement 3 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,9 x 1,4 x 1,16 m︱foot operated switch
            sheet width 2500 mm
            plate thickness 2,5 mm
            distance between columns 2550 mm
            cutting angle 1,5 °
            cutting strokes max. 35 p.Min.
            back stop - adjustable 500 mm
            total power requirement 3 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,9 x 1,4 x 1,16 m
          Datasheet
          Request / Contact

          Profile-Bending Machine

          used Metal Processing Profile-Bending Machine HUVEMA MIP 30 HV-4


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-121502 · Profile-Bending Machine

          HUVEMA - MIP 30 HV-4 - - 2015 -

          Technical details
          angle steel/side length 40 x 40 x 5 mm︱U-iron on the x-axis 50 x 25 x 5 mm︱roll diameter 98 - 148 mm︱speeds of rolls 20 U/min︱Speed Speed applicator roll 5 U/min︱diameter of roll spindle taper 30 mm︱total power requirement 1,1 kW︱weight of the machine ca. 220 kg︱dimensions of the machine ca. 1000 x 620 x 1400 mm︱
            angle steel/side length 40 x 40 x 5 mm
            U-iron on the x-axis 50 x 25 x 5 mm
            roll diameter 98 - 148 mm
            speeds of rolls 20 U/min
            Speed Speed applicator roll 5 U/min
            diameter of roll spindle taper 30 mm
            total power requirement 1,1 kW
            weight of the machine ca. 220 kg
            dimensions of the machine ca. 1000 x 620 x 1400 mm
          Datasheet
          Request / Contact

          Protective Gas Welding Machine

          used Metal Processing Protective Gas Welding Machine Jaeckle MIG 550


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-142230 · Protective Gas Welding Machine

          Jaeckle - MIG 550 - - -

          Technical details
          current intensivity 550 A︱total power requirement kW︱weight of the machine ca. 240 kg︱dimensions of the machine ca. 1,12 x 0,5 x ,91 m︱
            current intensivity 550 A
            weight of the machine ca. 240 kg
            dimensions of the machine ca. 1,12 x 0,5 x ,91 m
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Профіль трейдера: RS Sperling
          Maschinen & Industriebedarf

          Зв'язатися з трейдером



            Р. С. Сперлінг
          Maschinen & Industriebedarf

           von Braun-Str. 20
            46244 - Ботроп
            Німеччина
            + 49 (0) 2045 / 41 43-22 "> + 0 (49) 0 / 2045 41 43-22
            + 49 (0) 2045 / 41 43 22-9
            info@rs-sperling.de
            www.rs-sperling.de

          Профіль Трейдера





          The right used metal processing machines at LagerMaschinen.de
          Used metal processing machines for every occasion

          Metalworking comprises a variety of applications involving the manipulation of metal from large-scale production of metals including lathing milling and cutting to smaller operations such as jewellery working. No matter the application used metal processing machines present an ideal way of obtaining the equipment you need at a price you can afford. Used metal processing machines such as milling machines can be manually operated or using computer numeric control which increases the overall precision of the machine. The type of used metal processing machines you need depends on the applications you use but at LagerMaschinen.de you are sure to find what you’re looking for.

          The right machine for every field of application

          Used metal processing machines can be used in several fields. Companies active in the computer industry can obtain used metal processing machines for circuit board soldering and companies that need to bond different pieces can find the welding machines that they need. If your company is in the business of making the precision parts needed to make other precision machines then used grinding machines can be a great way to expand or refurbish your production lines. Used metal processing machines can also be found for lathing drilling milling and several other uses.

          Used equipment from LagerMaschinen.de

          No matter the type of equipment you will find the used metal processing machines you need at LagerMaschinen.de. With its international network of suppliers this platform can provide you with the used metal processing machines you need at a price you can afford.

          RS Sperling Maschinen  &  Industriebedarf  46244 - Bottrop von-Braun-Str. 20 Deutschland
          RS Sperling Maschinen & Industriebedarf

          von-Braun-Str. 20



          Contact Trader


            RS Sperling Maschinen & Industriebedarf
           von-Braun-Str. 20
            46244 - Bottrop
            Deutschland
            +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
            info@rs-sperling.de
            www.rs-sperling.de
            Contact person:

            Bitte besuchen Sie uns. Auf 3.000 m² Lagerfläche finden Sie eine Auswahl unseres umfangreichen Angebots von Neumaschinen und unseren Bestand an Gebrauchtmaschinen.
          Please visit us. In our warehouse you will find on 3.000 m² a selection of new machines and our complete stock of used machines.




          Machine category


          · Abkantmaschine · Abkantpresse - hydraulisch · Alu-Kreissäge · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsägeblätter · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Biegemaschine horizontal · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Doppelschleifbock · Doppelständer - Richtpresse · Exzenterpressen - Einständer · Fräskopf · Fräskopf senkrecht · Fräsmaschine - Universal · Futter · Gewindeschneidmaschine · Handhebel-Schere · Horizontal - Bandsägeautomat · Horizontal-Bandsäge Halbautomatisch · Hubtische · Härteprüfer · Kompressor · Konsolfräsmaschine - vertikal · Kühlmittelanlage · Kühlmittelpumpe · Kühlschmierstoff / Kühlmittelemulsion · Leit- und Zugspindeldrehmaschine · Lochstanze · Maschinenleuchte · Mechanikerdrehbank · Profil- Ring- Biegemaschine · Radialbohrmaschine · Richtpresse - Horizontal · Rohrausschleifer · Rohrbiegemaschine · Rundschleifmaschine - Universal · Rückholfeder für Bohrpinole · Schleifbock · Schraubstock · Schutzgasschweißanlage · Schwenkbiegemaschine · Sicken- und Bördelmaschine · Spiralbohrerschleifmaschine · Stanzpresse - Einständer · Säge- und Bohranlage · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Universal-Fräs- und Bohrmaschine · Vertikal - Bandsäge · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeugkoffer · Werkzeugwagen ·