Bar Automatic Lathe - Single Spindle

turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱

---

** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including inserts - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207350 * Machinevideo : https://www.youtube.com/watch?v=ba6oQf-zdhs

turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱

---

** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - 1x collet chuck including collets (inserts) - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including insert - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207349

Distance between centers 2.000 mm︱Centre height 250 mm︱Swing over bed 500 mm ø︱Swing over support 300 mm ø︱3-Jaw chuck 310 mm ø︱passage 105 mm Ø︱Machine dimensions (lxwxh) 3.700 x 1.700 x 1.600 mm︱

---

Brand ZMM Machine no D936 Type CU 500 MTRD Year of make 2007 Distance between centers 2000 mm Center height 250 mm Turning diameter above the bed 500 mm ø Turning diameter above the support 300 mm ø Turning diameter in the bag 700 mm ø Passage 105 mm ø Fixed glasses 3-Jaw Chuck 310 mm ø Quick-change holders 10 2 axis digital Digital readout Newall Rapid on the support Rapid traverse along and transverse movement Speed 16-1.400 RPM Engine 11 kW Voltage 380V Various accessories Machine size (lxwxh) 3.700 x 1.700 x 1.600 mm

turning diameter 1320 mm︱turning length 6000 mm︱swing diameter over bed slide 940 mm︱turning diameter in the gap 1510 mm︱total power requirement 30 kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. m︱

---

turning length 750 mm︱turning diameter 310 mm︱turning diameter over slide rest 175 mm︱spindle bore 32,0 mm︱tailstock quill taper MT 3 MK︱turning speeds 85 - 2200 U/min︱bed width 200 mm︱total power requirement 2,2 kW︱weight of the machine ca. 710 kg︱range L-W-H 1884 x 717 x 1262 mm︱

---

** New price ~ 23.000 euros ** from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

turning diameter 180 mm︱turning length - mm︱swing diameter over bed slide - mm︱center height over work table 155 mm︱Distance between centres 750 mm︱turning dia. over bed 310 mm︱passage 33 mm︱

---

Brand ZMM Type HU310 x 750 Year of make 2003 Distance between centers 750 mm Center height 155 mm Turning diameter above the bed 310 mm ø Turning diameter above the support 180 mm ø Passage 33 mm ø Glasses 70 mm ø Pedestrian glasses Fixed glasses 3-Jaw Chuck 3-Jaw Chuck 160 mm ø Quick-change holder Quick-change holders 4 Voltage 380V

turning length 750 mm︱turning diameter 310 mm︱turning diameter over slide rest 175 mm︱spindle bore 32,0 mm︱tailstock quill taper MT 3 MK︱turning speeds 85 - 2200 U/min︱bed width 200 mm︱spindle taper DIN 55027 GR 5 ︱total power requirement 2,2 kW︱weight of the machine ca. 710 kg︱range L-W-H 1884 x 717 x 1262 mm︱

---

** New price ~ 20.000 euros ** from a technical college (!!) Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207330 * Machinevideo : https://www.youtube.com/watch?v=iqU7Bkh6INo

turning length 1500 mm︱turning diameter over bed 460 mm︱turning diameter over slide rest 240 mm︱turning dia. in gap 650 mm︱number of spindle speeds 32 - 2000 U/min.︱turning speeds 12 Stk.︱spindle bore Ø 58.0 mm︱quill stroke 130 mm︱bed width 300 mm︱tailstock quill taper MT DIN 228 / MK 4 ︱spindle taper DIN 55027 / D 1-6" ︱feeds - longitudinal 0,031 - 1.7 mm/U︱feeds - cross 0,014 - 0,784 mm/U︱voltage 380 V︱total power requirement 5.5 kW︱weight of the machine ca. 1977 kg︱range L-W-H 2750 x 1080 x 1370 mm︱

---

** Machine from a maintenance workshop ** current new price ~ 17.500 euros ** Special price on request Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RÖHM 3-jaw chuck, including replacement jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder - size B - with 2x inserts - movable tailstock, with rotating center center - universally adjustable machine light - Chip protection back wall - EMERGENCY stop button at the front - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207346

turning length 750 mm︱turning diameter 310 mm︱centre height 175 mm︱spindle bore 32,0 mm︱tailstock quill taper MT 3 MK︱turning speeds 85 - 2200 U/min︱bed width 200 mm︱spindle taper DIN 55027 GR 5 ︱total power requirement 2,2 kW︱weight of the machine ca. 710 kg︱range L-W-H 1884 x 717 x 1262 mm︱

---

** New price ~ 20.000 euros ** from a technical college (!!) Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 3x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207331

turning diameter - mm︱turning length 1500 mm︱swing diameter over bed slide 400 mm︱

---

Distance between centers: 1500 mm Centre height: 200 mm Swing over bed: 400 mm ø Swing over support: 220 mm ø Swing in the gap: 550 mm ø Spindle boring: 60 mm ø Steady rest: 200 mm ø 3-Jaw chuck: 250 mm ø Quick change toolholders: 3 Revolving center Digital read-out Rapid traverse on support

2 ︱turning diameter max. 250 mm︱toll turrets 2 x 12 ︱control Fanuc 16 T ︱tool taper HSK 63 ︱ 04800000181 ︱frequency 50 Hz︱ampere 168 A︱

---

turning length 700 mm︱turning diameter over bed 340 mm︱turning diameter over slide rest 190 mm︱number of spindle speeds 35 - 3000 U/min.︱turning speeds 4 Stk.︱spindle bore Ø 50.0 mm︱quill stroke 120 mm︱bed width 260 mm︱tailstock quill taper MT MK 3 ︱spindle taper DIN 55029 / GR 5 ︱feeds - longitudinal 0,045 - 0,787 mm/U︱feeds - cross 0,023 - 0,406 mm/U︱voltage 380 V︱total power requirement 5.3 kW︱weight of the machine ca. 755 kg︱range L-W-H 1650 x 1060 x 1635 mm︱

---

** Machine from a vocational school (NL) ** very well-maintained condition (!!) Furnishing: - robust lead and pull spindle lathe - Guideways, gears and quill hardened and ground - Electromechanical spindle brake - Diagonally ribbed, induction hardened machine bed - Infinitely variable speed control/constant cutting speed - digital speed display - EMCO digital display - mounted on the bed carriage - EMCO 3-jaw chuck Ø 200 mm - RÖHM 4-jaw chuck Ø 250 mm - foldable lathe chuck protection - Steel holder with 2x inserts - fixed bezel - movable tailstock, with rotating center point - removable chip tray - Chip protection back wall - Coolant device - Bed stop - EMERGENCY stop button (on digital display) - rigid lead and pull spindle cover - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207353

turning length 700 mm︱turning diameter over bed 340 mm︱turning diameter over slide rest 190 mm︱number of spindle speeds 35 - 3000 U/min.︱turning speeds 4 Stk.︱spindle bore Ø 50.0 mm︱quill stroke 120 mm︱bed width 260 mm︱tailstock quill taper MT MK 3 ︱spindle taper DIN 55029 / GR 5 ︱feeds - longitudinal 0,045 - 0,787 mm/U︱feeds - cross 0,023 - 0,406 mm/U︱voltage 380 V︱total power requirement 5.3 kW︱weight of the machine ca. 755 kg︱range L-W-H 1650 x 1060 x 1635 mm︱

---

** Machine from a vocational school (NL) ** very well-maintained condition (!!) Furnishing: - robust lead and pull spindle lathe - Guideways, gears and quill hardened and ground - Electromechanical spindle brake - Diagonally ribbed, induction hardened machine bed - Infinitely variable speed control/constant cutting speed - digital speed display - EMCO digital display - mounted on the bed carriage - EMCO 3-jaw chuck Ø 200 mm - RÖHM 4-jaw chuck Ø 250 mm - foldable lathe chuck protection - Steel holder with 2x inserts - fixed bezel - movable tailstock, with rotating center point - removable chip tray - Chip protection back wall - Coolant device - Bed stop - EMERGENCY stop button (on digital display) - rigid lead and pull spindle cover - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207354

centre distance 2000 mm︱ 555 mm ︱control S 3 Weiler ︱ 2 ︱chuck . mm︱multifix . ︱weight of the machine ca. 4 t︱

---

︱ ︱ ︱

---

Distance between centers 1.500 mm︱Centre height 280 mm︱Swing over bed - mm ø︱Swing over support 280 mm ø︱3-Jaw chuck 300 mm ø︱4-Jaw chuck 400 mm ø︱passage 85 mm︱

---

Brand Fat Type TUR 560 Year of make 1992 Distance between centers 1.500 mm Center height 280 mm Turning diameter above the bed 560 mm ø Turning diameter above the support 280 mm ø Passage 85 mm ø Glasses pivot center 3-Jaw Chuck 300 mm ø 4-Jaw Chuck 400 mm ø Quick-change holder Digital readout Defect Voltage 380V Machine size (lxwxh) 3.150 x 1.200 x 1.600 mm Machine weight 3.350 kg

turning length 1000 mm︱turning diameter over bed 380 mm︱turning diameter over slide rest 190 mm︱number of spindle speeds 25 - 2000 U/min.︱turning speeds 18 Stk.︱spindle bore Ø 56,0 mm︱tailstock quill taper MT DIN 228 / MK 4 ︱quill stroke 150 mm︱bed width 310 mm︱spindle taper DIN 55027 / 6 ︱feeds - longitudinal 0,022 - 0,8 mm/U︱feeds - cross 0,011 - 0,4 mm/U︱thread M 0,3 - 10,0 mm︱voltage 380 V︱total power requirement 7,5 kW︱weight of the machine ca. 1600 kg︱range L-W-H 2320 x 1400 x 1600 mm︱

---

** Machine from a workshop for the disabled Lathe with precision ground and induction hardened bed. Very suitable e.g. for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - 2 axis "HEIDENHAIN" digital display, front left - FORKARDT 3-jaw chuck Ø 200 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder - size B - with 5x inserts - Movable tailstock, with live center - Chip protection rear panel - 4x machine swing feet - 2x EMERGENCY OFF button on the front - Lead/feed screw protection - adjustable bed stop - Various application / turning tools * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207335

turning diameter over bed 300 mm︱turning diameter over slide rest 150 mm︱turning length 800 mm︱spindle bore 36 mm︱turning speed range 42 - 2000 U/min︱feeds 0,011 - 0,91 mm/U︱tailstock quill taper MT 3 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,7 x 0,8 x 2,0 m︱

---

Machine had been active in the school centre very little used!

turning diameter 36 mm︱turning length 125 mm︱swing diameter over bed slide mm︱Control ︱total power requirement 22 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 6500mm x 1400mm x 2100mm m︱

---

turning length 1050 mm︱turning diameter 380 mm︱centre height 180 mm︱turning diameter over slide rest 200 mm︱quill: 4 MK︱quill stroke 180 mm︱turning speeds 33 - 1500 U/min︱number 12 Drehz.︱bed width 330 mm︱spindle bore 52.0 mm︱adjustment range: Ober 130 mm︱adjustment range: Plan 330 mm︱tool adaptor CAMLOCK GR 6 ︱work height max. 1060 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1050 kg︱range L-W-H 2000 x 850 x 1450 mm︱

---

** good / well-maintained condition (!!) Furnishing: - 3-jaw chuck Ø 200 mm (CAMLOCK GR 6) - MULTIFIX steel holder, with 4x inserts - robust, movable tailstock - rotating center punch tips - Food key - various other accessories - Coolant device - removable chip tray - rear splash guard - Connection cable + plug - Emergency stop button - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207355

turning diameter 800 mm︱turning length 3000 mm︱swing diameter over bed slide xx mm︱total power requirement xx kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

turning length 600 mm︱turning diameter over bed 360 mm︱turning diameter over slide rest 190 mm︱bed width 295 mm︱number of spindle speeds 45 - 2240 U/min.︱spindle bore 33,0 mm︱tailstock quill taper MT MK 3 ︱feed Längs 0,02-0,8 mm/U︱feed Quer 0,0125-0,5 mm/U︱total power requirement 5,5 kW︱weight of the machine ca. 1900 kg︱range L-W-H 2050 x 950 x 1280 mm︱

---

** Refurbished and repainted in 2013 ** Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual

turning diameter 500 mm︱turning length 1250 mm︱swing diameter over bed slide 285 mm︱turning speeds 11,2 - 2240 U/min︱spindle bore 62 mm︱quill stroke 190 mm︱tailstock quill taper MT 5 ︱total power requirement 13,0 kW︱weight of the machine ca. 3200 kg︱dimensions of the machine ca. 3350 x 1500 x 1300 mm︱

---

- MULTIFIX steel holder - RÖHM 4-jaw chuck Ø250 mm - Lathe chuck protection - Chip protection rear wall

turning length 920 mm︱turning diameter over bed 260 mm︱turning diameter over slide rest 140 mm︱number of spindle speeds 35.5 - 3150 U/min.︱turning speeds 14 Stk.︱spindle bore Ø 30.0 mm︱quill stroke 100 mm︱bed width 255 mm︱tailstock quill taper MT DIN 228 / MK 4 ︱spindle taper DIN 55027 / GR 5 ︱feeds - longitudinal 0.04 - 0.4 mm/U︱feeds - cross 0.02 - 0.2 mm/U︱voltage 380 V︱total power requirement 3.0 kW︱weight of the machine ca. 1100 kg︱range L-W-H 2140 x 850 x 1400 mm︱

---

** Machine from a vocational school (NL) Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RSF "Z-520" 2-axis digital display - RÖHM 3-jaw chuck Ø 200 mm, including chuck key - foldable lathe chuck protection - DREHBLITZ steel holder - TYPE DB 70 - with 2x inserts - robust, movable tailstock including center point - Chip protection back wall - 4x machine swing feet - 1x thread clock - Lead and pull spindle protection - Coolant device - EMERGENCY stop button on the front right - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207352