'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Bench Lathe

          Machinelist: Bench Lathe


          Bench Lathe

          used Lathes Bench Lathe KAMI DKM 250V.550


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78007 · Bench Lathe

          KAMI - DKM 250V.550 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 20 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 60 mm︱metric threading 0,4 - 3,0 mm︱thread - inch 10 - 44 TPI︱thread - module 0,2 - 12,5 mm︱connected load frequency 230 V︱total power requirement 1,0 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,09 x 0,59 x 0,45 m︱
          Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 20 mm
            tailstock quill taper MT 2
            tailstock quill stroke 60 mm
            metric threading 0,4 - 3,0 mm
            thread - inch 10 - 44 TPI
            thread - module 0,2 - 12,5 mm
            connected load frequency 230 V
            total power requirement 1,0 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,09 x 0,59 x 0,45 m
            Description :
            Equipped with
            - 20 mm spindle passage
            - adjustable guideways
            - Powerful 1.0 kW motor
            - continuously variable speed
            Scope of delivery:
            - 3-jaw chuck 100 mm,
            - 4-jaw faceplate chuck 125mm
            - standing and rotating bezel
            - Splash guard
            - Feed protection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Norton Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78003 · Bench Lathe

          HBM - 250 x 550 Norton Profi - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱
          Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 125 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 1,25 x 0,6 x 0,6 m
            Description :
            Speed in 6 levels 125 - 2000rpm.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm. (Independent)
            Fixed bezel.
            Revolving bezel.
            4-fold steel holder.
            chip tray.
            back panel.
            spindle protection.
            Hardened bed rails.
            Longitudinal feed with left / right switching.
            Set of change gears.
            Associated Tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn Vario mit MFB Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78005 · Bench Lathe

          ELMAG - Superturn Vario mit MFB Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱bore capacity in steel 16 mm︱throat 169 mm︱quill stroke 50 mm︱turning speed range - drilling 50 - 2250 U/min︱spindle drive 0,5 kW︱total power requirement 0,75 kW︱weight of the machine ca. 0,175 t︱dimensions of the machine ca. 1,3 x 0,65 x 1,3 m︱
          3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            bore capacity in steel 16 mm
            throat 169 mm
            quill stroke 50 mm
            turning speed range - drilling 50 - 2250 U/min
            spindle drive 0,5 kW
            total power requirement 0,75 kW
            weight of the machine ca. 0,175 t
            dimensions of the machine ca. 1,3 x 0,65 x 1,3 m
            Description :
            3-axis LCD digital display system
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78001 · Bench Lathe

          KAMI - DKM 250L - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 27 mm spindle clearance
            - adjustable guideways
            - Powerful motor with 0.75 kW
            - High resolution of the axis spindles for exact positioning
            - Danger!! without digital display
            Scope of delivery:
            3-jaw chuck 100 mm, change gear set, splash guard.

            On request also with 230 volt connection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Profi Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78002 · Bench Lathe

          HBM - 250 x 550 Profi Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱
          Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,3 x 0,6 x 0,65 m
            Description :
            Benchtop lathe with base cabinet
            3-axis LCD digital display system fully assembled.
            Longitudinal feed.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm.
            Clamping plate.
            4-way steel holder.
            Clock for thread cutting.
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Forage protection
            Set of wheels.
            Appropriate tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L-1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78000 · Bench Lathe

          KAMI - DKM 250L-1 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 2-axis digital measuring system with position indicator
            - manufactured according to DIN 8606
            - 27 mm spindle passage
            - adjustable guideways "by adjustable strips"
            - Strong engine with 0.75 kW
            - High resolution of the axis spindles for exact positioning

            Delivery:
            3-jaw chuck 100 mm, change gear set, splash guard 3-axis
            digital measuring system fully assembled.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn 250 x 550 Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78004 · Bench Lathe

          ELMAG - Superturn 250 x 550 Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,3 x 0,65 x 0,6 m︱
          longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,3 x 0,65 x 0,6 m
            Description :
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 290 x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78006 · Bench Lathe

          HBM - 290 x 750 - - -neu- -

          Technical details
          turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱
          2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.
            turning diameter over bed 290 mm
            turning diameter over slide rest 170 mm
            turning length 750 mm
            turning speeds 75 - 2000 U/min
            centre height 145 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            tailstock quill stroke 80 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,34 t
            dimensions of the machine ca. 1,3 x 0,75 x 0,7 m
            Description :
            2-axis LCD digital display system (now new).
            Longitudinal and transverse feed.
            3-jaw chuck 160 mm.
            4-jaw chuck 160 mm.
            faceplate
            4-way steel holder with 4 pcs tool holders
            2 pcs. bezels
            Machine light
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Feed protection
            Set of wheels.
            Machine tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe SCHAUBLIN 102 N


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4180 · Bench Lathe

          SCHAUBLIN - 102 N - - -

          Technical details
          centre height 102 mm︱Distance between centres 450 mm︱turning dia. over face-slide 120 mm︱turning diameter over bed 200 mm︱spindle taper: W20 ︱spindle bore 22 mm︱number of spindle speeds 18 ︱from/to 45-2500 U/min︱tailstock quill taper MT 2 ︱diameter of quill 30 mm︱quill stroke 110 mm︱dimensions of the machine ca. 1500x800x1400 mmxmmxmm︱weight 380 kg︱accessories and equipment: ︱3-jaw-chuck diameter 100 mm︱quick change tool holder: ︱make MULTIFIX ︱boring chuck 1 ︱misc. accessories
            centre height 102 mm
            Distance between centres 450 mm
            turning dia. over face-slide 120 mm
            turning diameter over bed 200 mm
            spindle taper: W20
            spindle bore 22 mm
            number of spindle speeds 18
            from/to 45-2500 U/min
            tailstock quill taper MT 2
            diameter of quill 30 mm
            quill stroke 110 mm
            dimensions of the machine ca. 1500x800x1400 mmxmmxmm
            weight 380 kg
            3-jaw-chuck diameter 100 mm
            make MULTIFIX
            boring chuck 1


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact

          Heavy Duty Lathe

          used Lathes Heavy Duty Lathe FRORIEP SS 60 x 13000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-15807 · Heavy Duty Lathe

          FRORIEP - SS 60 x 13000 - - ca. 1975 -

          Technical details
          turning diameter over bed 4000 mm︱turning diameter over slide rest 2200 mm︱turning length 13000 / 6500 mm︱centre distance 13000 mm︱faceplate yes mm︱workpiece weight 100 t︱steady 8 ︱Rest 2 ︱spindle bore 95 mm︱internal taper diameter 120 mm︱tailstock quill taper metric 120mm 60° ︱tailstock quill diameter 280 mm︱quill travel 450 mm︱total power requirement - kW︱
          Heavy Duty Lathe with 4-guides bed and is equipped with 2 cross-slides: - one is mounted on a chassis bed installed next to the main chassis of the lathe - one is mounted on an upper chassis bed on top of the main chassis of the lathe - the upper chassis bed is also movable on top of the main chassis of the lathe Max length of workpiece on main chassis: 13 meter Max length of workpiece on top of upper chassis bed: 6,5 meter Max swing in gap using main cross-slide: 4000 mm Max swing over bed using using secondary cross-slide: 2700 mm Max swing over cross-slide: 2220 mm - 8 Steadies
            turning diameter over bed 4000 mm
            turning diameter over slide rest 2200 mm
            turning length 13000 / 6500 mm
            centre distance 13000 mm
            faceplate yes mm
            workpiece weight 100 t
            steady 8
            Rest 2
            spindle bore 95 mm
            internal taper diameter 120 mm
            tailstock quill taper metric 120mm 60°
            tailstock quill diameter 280 mm
            quill travel 450 mm
            total power requirement - kW
            Description :
            Heavy Duty Lathe with 4-guides bed and is equipped with 2 cross-slides:
            - one is mounted on a chassis bed installed next to the main chassis of the
            lathe
            - one is mounted on an upper chassis bed on top of the main chassis of the lathe
            - the upper chassis bed is also movable on top of the main chassis of the lathe

            Max length of workpiece on main chassis: 13 meter
            Max length of workpiece on top of upper chassis bed: 6,5 meter
            Max swing in gap using main cross-slide: 4000 mm
            Max swing over bed using using secondary cross-slide: 2700 mm
            Max swing over cross-slide: 2220 mm
            - 8 Steadies


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe 1300MMT-germany CN/KAN/KBN Serie


          • Meister Maschinen
          • Overhagener Weg 44
          • 59597 Erwitte
          • Deutschland

          • +49 (0) 2943-870946
            +49 (0) 2943-870885
          • info@meister-maschinen.com
            www.meister-maschinen.com
          #2005-10093 · Heavy Duty Lathe

          1300MMT-germany - CN/KAN/KBN Serie - - 2021 -

          Technical details
          turning diameter over bed 1300-12000 mm︱turning diameter over slide rest mmmmm mm︱turning length 3000-12000 mm︱
            turning diameter over bed 1300-12000 mm
            turning diameter over slide rest mmmmm mm
            turning length 3000-12000 mm


        • Meister Maschinen
        • Overhagener Weg 44
        • 59597 Erwitte
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe QIQIHAR HT125x110/12


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08290 · Heavy Duty Lathe

          QIQIHAR - HT125x110/12 - - 2009 -

          Technical details
          turning diameter over bed 1250 mm︱turning diameter over slide rest 1000 mm︱turning length 11000 mm︱total power requirement kW︱weight of the machine ca. 49 t︱dimensions of the machine ca. m︱
          Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual
            turning diameter over bed 1250 mm
            turning diameter over slide rest 1000 mm
            turning length 11000 mm
            weight of the machine ca. 49 t
            Description :
            Center height 720 mm
            Center distance 11000 mm
            Turning diameter over bed 1250 mm
            Turning diameter over slide 1000 mm
            Workpiece weight max 12 to
            Speed 3-315 rpm - stepless
            Motor power 55 kW (DC)

            Equipment
            1 position indicator HEIDENHAIN | Type ND 780 for 1 axis
            1 four-jaw faceplate Ø 1000 mm
            1 fixed steady rest
            1 ring steady rest with four-jaw faceplate Ø 920 mm
            1 Autom. 4-pos. tool holder
            1 Chip conveyor
            1 Machine lamp
            1 Coolant device
            Operating key | operating manual


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe GIANA GFSC 12 CNC


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0294 · Heavy Duty Lathe

          GIANA - GFSC 12 CNC - - 2007 - Sinumerik 840D

          Technical details
          turning diameter over bed 1.200 mm︱turning diameter over slide rest 710 mm︱turning length 7.000 mm︱Control Sinumerik 840D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Heavy duty lathe with milling and grinding function / Brand: GIANA / Type: GFSC 12 CNC / Year of construction: 2007 The machine can be inspected by appointment under working condition. TECHNICAL SPECIFICATIONS: - Turning diameter over bed: 1.200 mm - Turning diameter over slide rest: 710 mm - Turning length: 7.000 mm - CNC Control: SIEMENS SINUMERIK 840D EQUIPMENT/ACCESSORIES: - Cooling lubricant system - Chip conveyor - Various accessories: Steady rests .... There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.
            turning diameter over bed 1.200 mm
            turning diameter over slide rest 710 mm
            turning length 7.000 mm
            Control Sinumerik 840D
            Description :
            Heavy duty lathe with milling and grinding function / Brand: GIANA /
            Type: GFSC 12 CNC / Year of construction: 2007

            The machine can be inspected by appointment under working condition.

            TECHNICAL SPECIFICATIONS:
            - Turning diameter over bed: 1.200 mm
            - Turning diameter over slide rest: 710 mm
            - Turning length: 7.000 mm

            - CNC Control: SIEMENS SINUMERIK 840D

            EQUIPMENT/ACCESSORIES:
            - Cooling lubricant system
            - Chip conveyor
            - Various accessories: Steady rests ....


            There is no guarantee for correctness and completeness of the technical details
            and accessories.

            Detailed technical data sheet and information on equipment available on request.


        • Isabelle Knops
        • Opladener Str. 126
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe WOHLENBERG PT1-1070II


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03186 · Heavy Duty Lathe

          WOHLENBERG - PT1-1070II - - 1989 - Siemens

          Technical details
          turning diameter over bed 1070 mm︱turning diameter over slide rest 710 mm︱turning length 11000 mm︱Control Siemens ︱type 840 D ︱bed width 710 mm︱transmission ratio 2 ︱turning speeds 3,55-710 U/min︱diameter of quill 200 mm︱quill stroke 350 mm︱spindle passage 128 mm︱chip conveyor ︱faceplate 1000 mm︱steady 500 mm︱steady 500 mm︱steady 500 mm offen︱steady 500 mm offen︱steady 800 mm offen︱steady 800 mm offen︱roll stand 2 St︱
            turning diameter over bed 1070 mm
            turning diameter over slide rest 710 mm
            turning length 11000 mm
            Control Siemens
            type 840 D
            bed width 710 mm
            transmission ratio 2
            turning speeds 3,55-710 U/min
            diameter of quill 200 mm
            quill stroke 350 mm
            spindle passage 128 mm
            faceplate 1000 mm
            steady 500 mm
            steady 500 mm
            steady 500 mm offen
            steady 500 mm offen
            steady 800 mm offen
            steady 800 mm offen
            roll stand 2 St


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe KRAMATORSK K3


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-01617 · Heavy Duty Lathe

          KRAMATORSK - K3 - - 1987 - Sinumerik 840 D

          Technical details
          turning diameter over bed 2200 mm︱turning diameter over slide rest 2200 mm︱turning length 10000-11000 mm︱control Sinumerik 840 D︱workpiece weight 70.000 kg︱faceplate 2000 mm︱steady 2 ︱Torque 125000 Nm︱feed 0,3-4000 mm/min︱rapid traverse 4000 mm/min︱roll stand ︱total power requirement 110 kW︱weight of the machine ca. 120 t︱dimensions of the machine ca. 22x6,2x2,9 m︱
            turning diameter over bed 2200 mm
            turning diameter over slide rest 2200 mm
            turning length 10000-11000 mm
            control Sinumerik 840 D
            workpiece weight 70.000 kg
            faceplate 2000 mm
            steady 2
            Torque 125000 Nm
            feed 0,3-4000 mm/min
            rapid traverse 4000 mm/min
            total power requirement 110 kW
            weight of the machine ca. 120 t
            dimensions of the machine ca. 22x6,2x2,9 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe WOHLENBERG PT1 1070


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03683 · Heavy Duty Lathe

          WOHLENBERG - PT1 1070 - - 1987 - Siemens

          Technical details
          turning diameter over bed 1100 mm︱turning diameter over slide rest 780 mm︱turning length 4100 mm︱Control Siemens ︱type 840 D ︱bed width 710 mm︱faceplate 1000 mm︱turning speeds 1110 U/min︱total power requirement 4,79-69 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 1100 mm
            turning diameter over slide rest 780 mm
            turning length 4100 mm
            Control Siemens
            type 840 D
            bed width 710 mm
            faceplate 1000 mm
            turning speeds 1110 U/min
            total power requirement 4,79-69 kW


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe WEISSER-HEILBRONN Gigant - CNC


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S5275 · Heavy Duty Lathe

          WEISSER-HEILBRONN - Gigant - CNC - - 1982 - Siemens Sinumerik 840D

          Technical details
          turning length 2000 mm︱turning diameter 1200 mm︱centre height 600 mm︱control Siemens Sinumerik 840D
            turning length 2000 mm
            turning diameter 1200 mm
            centre height 600 mm
            control Siemens Sinumerik 840D
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe POREBA TCG 125


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12253C · Heavy Duty Lathe

          POREBA - TCG 125 - - 1980 -

          Technical details
          turning diameter over slide rest 940 mm︱turning length 10000 mm︱turning diameter 1250 mm︱spindle diameter 105 mm︱speed 1,6 - 315 (x24) m/min︱voltage 380 V︱total power requirement 75 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          4-jaw faceplate Power compound
            turning diameter over slide rest 940 mm
            turning length 10000 mm
            turning diameter 1250 mm
            spindle diameter 105 mm
            speed 1,6 - 315 (x24) m/min
            voltage 380 V
            total power requirement 75 kW
            Description :
            4-jaw faceplate
            Power compound


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe POREBA TCF 224


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12276C · Heavy Duty Lathe

          POREBA - TCF 224 - - 1980 - Siemens

          Technical details
          turning diameter over bed 2240 mm︱turning diameter over slide rest 1790 mm︱turning length 1250 mm︱turning speeds 0,5-250 U/min︱spindle bore 105 mm︱workpiece weight 30 t︱steady 400-700 mm︱steady 700-1200 mm︱steady 1000-1600 mm︱control Siemens ︱total power requirement 75/110 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 2240 mm
            turning diameter over slide rest 1790 mm
            turning length 1250 mm
            turning speeds 0,5-250 U/min
            spindle bore 105 mm
            workpiece weight 30 t
            steady 400-700 mm
            steady 700-1200 mm
            steady 1000-1600 mm
            control Siemens
            total power requirement 75/110 kW


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe POREBA TCF 229


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02113 · Heavy Duty Lathe

          POREBA - TCF 229 - - 1980 - Siemens

          Technical details
          turning diameter over bed 1930 mm︱turning diameter over slide rest 1520 mm︱turning length 5000 mm︱turning speeds 0,5-250 U/min︱spindle bore 105 mm︱workpiece weight 35 t︱steady 400-700 mm︱steady 700-1200 mm︱steady 1000-1600 mm︱control Siemens ︱total power requirement 106 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 1930 mm
            turning diameter over slide rest 1520 mm
            turning length 5000 mm
            turning speeds 0,5-250 U/min
            spindle bore 105 mm
            workpiece weight 35 t
            steady 400-700 mm
            steady 700-1200 mm
            steady 1000-1600 mm
            control Siemens
            total power requirement 106 kW


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe POREBA TCG125


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12415CH · Heavy Duty Lathe

          POREBA - TCG125 - - 1977 -

          Technical details
          turning diameter over bed 1250 mm︱turning diameter over slide rest 940 mm︱turning length 600 mm︱centre distance 6200 mm︱spindle speed: 1.6-315 U/min︱tailstock quill diameter 200 mm︱workpiece weight 30 t︱workpiece weight max. 40 t︱steady 3 ︱digital readout ︱total power requirement 75 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 11x2,4x1,9 m︱drive motor 75 kW︱
            turning diameter over bed 1250 mm
            turning diameter over slide rest 940 mm
            turning length 600 mm
            centre distance 6200 mm
            spindle speed: 1.6-315 U/min
            tailstock quill diameter 200 mm
            workpiece weight 30 t
            workpiece weight max. 40 t
            steady 3
            total power requirement 75 kW
            weight of the machine ca. 25 t
            dimensions of the machine ca. 11x2,4x1,9 m
            drive motor 75 kW
            Description :



        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe TOSHIBA LCS 40200A CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20235 · Heavy Duty Lathe

          TOSHIBA - LCS 40200A CNC - - 1976 /2009 - Fanuc 18i TB

          Technical details
          turning diameter over bed 5000 mm︱turning diameter over slide rest 4000 mm︱turning length 20000 mm︱faceplate diameter 3500 mm︱control Fanuc 18i TB ︱turning speeds 4 - 40 U/min︱workpiece weight max. 350 t︱main drive motor 485 kW︱longitudinal feeds: 0,3 - 120 mm/min︱cross feed 0,15 - 60 mm/min︱cutting capacity 20000 kp︱total power requirement - kW︱weight of the machine ca. 435 t︱dimensions of the machine ca. 30 x 9 x 5,5 m︱
          overhauled and modernized in 2008/2009, equipped with: - CNC control FANUC 18i TB - face plate - 2 slides with control unit - 2 heavy duty steady rests (200t support load each), dia: 600-2000mm - Hydrostatic bearing in spindle & tailstock - 5 lanes bed - chip conveyor - Coolant system - Tailstock with faceplate (dia. 3000mm)
            turning diameter over bed 5000 mm
            turning diameter over slide rest 4000 mm
            turning length 20000 mm
            faceplate diameter 3500 mm
            control Fanuc 18i TB
            turning speeds 4 - 40 U/min
            workpiece weight max. 350 t
            main drive motor 485 kW
            longitudinal feeds: 0,3 - 120 mm/min
            cross feed 0,15 - 60 mm/min
            cutting capacity 20000 kp
            total power requirement - kW
            weight of the machine ca. 435 t
            dimensions of the machine ca. 30 x 9 x 5,5 m
            Description :
            overhauled and modernized in 2008/2009, equipped with:
            - CNC control FANUC 18i TB
            - face plate
            - 2 slides with control unit
            - 2 heavy duty steady rests (200t support load each), dia: 600-2000mm
            - Hydrostatic bearing in spindle & tailstock
            - 5 lanes bed
            - chip conveyor
            - Coolant system
            - Tailstock with faceplate (dia. 3000mm)



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe POREBA TCG125


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02478 · Heavy Duty Lathe

          POREBA - TCG125 - - 1975 -

          Technical details
          turning diameter over bed 1250 mm︱turning diameter over slide rest 940 mm︱turning length 6000 mm︱centre distance 6200 mm︱spindle speed: 1.6-315 U/min︱tailstock quill diameter 200 mm︱workpiece weight 30 t︱workpiece weight max. 40 t︱steady 3 ︱digital readout ︱total power requirement kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 11x2,4x1,9 m︱drive motor 75 kW︱
            turning diameter over bed 1250 mm
            turning diameter over slide rest 940 mm
            turning length 6000 mm
            centre distance 6200 mm
            spindle speed: 1.6-315 U/min
            tailstock quill diameter 200 mm
            workpiece weight 30 t
            workpiece weight max. 40 t
            steady 3
            weight of the machine ca. 25 t
            dimensions of the machine ca. 11x2,4x1,9 m
            drive motor 75 kW
            Description :



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe SKODA SRM 100


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20976 · Heavy Duty Lathe

          SKODA - SRM 100 - - 1975 -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 710 mm︱turning length 7000 mm︱max. workpiece weight between centres 10000 kg︱spindle turning speed range 1,8-400 U/min︱tailstock quill taper metric 80/1:10 ︱tailstock - quill dia 170 mm︱tailstock - travel of quill 200 mm︱Tailstock quill travel speed 2150 mm/min︱main drive motor 37 kW︱longitudinal feeds: 0,125-48 mm/U ︱face feeds 0,4 der Längsvorschübe ︱weight of the machine ca. 17 t︱dimensions of the machine ca. 11x1,9x2 m︱
          machine was mechanically and electrically overhauled in the last years. - taper turning function - 3 lynettes - misc. center points for tailstock - set of change gears
            turning diameter over bed 1000 mm
            turning diameter over slide rest 710 mm
            turning length 7000 mm
            max. workpiece weight between ce. 10000 kg
            spindle turning speed range 1,8-400 U/min
            tailstock quill taper metric 80/1:10
            tailstock - quill dia 170 mm
            tailstock - travel of quill 200 mm
            Tailstock quill travel speed 2150 mm/min
            main drive motor 37 kW
            longitudinal feeds: 0,125-48 mm/U
            face feeds 0,4 der Längsvorschübe
            weight of the machine ca. 17 t
            dimensions of the machine ca. 11x1,9x2 m
            Description :
            machine was mechanically and electrically overhauled in the last years.

            - taper turning function
            - 3 lynettes
            - misc. center points for tailstock
            - set of change gears


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

          TOP Manufacturer:

          HBM - KAMI - ELMAG - SCHAUBLIN -