Heavy Duty Lathe

Machinelist: Heavy Duty Lathe

Heavy Duty Lathe

Kemmerich Werkzeugmaschinen
Im Rottfeld 1a
40789 Monheim am Rhein
Deutschland

+49 2173 207474
+49 2173 207473
info@kemmerich.biz
www.kemmerich.biz

#1020-18487 · Heavy Duty Lathe

ZERBST - DxP5/W15x15000 - - 1959/2009 - Siemens 840 Dsl

Technical details

turning diameter over bed 3000 mm︱turning diameter over slide rest 2400 mm︱turning length 15000 mm︱spindle diameter in front bearing 750 mm︱spindle bore 220 mm︱faceplate diameter 3150 mm︱control Siemens 840 Dsl ︱accuracy +/- bis/up to: 0,01 mm︱spindle motor 110 kW︱faceplate speeds from - to 0,9 - 56 U/min︱workpiece weight max. 80000 kg︱max.workpiece weight:each extra steadyrest - kg︱tail stock ︱tailstock quill diameter 660 mm︱tailstock quill stroke 100 mm︱total power requirement 150 kVA︱weight of the machine ca. 60 t︱

overhauled and modernized 2009 & 2012/2013 equipped with: - CNC control Siemens 840D SL ShopTurn - 2 supports with 1 controller each - 4-jaw face plate - 2 hydraulic steady rests (1760mm) - hydraulic tailstock Machine is dismantled and stored.

turning diameter over bed 3000 mm

turning diameter over slide rest 2400 mm

turning length 15000 mm

spindle diameter in front bearin. 750 mm

spindle bore 220 mm

faceplate diameter 3150 mm

control Siemens 840 Dsl

accuracy +/- bis/up to: 0,01 mm

spindle motor 110 kW

faceplate speeds from - to 0,9 - 56 U/min

workpiece weight max. 80000 kg

max.workpiece weight:each extra . - kg

tailstock quill diameter 660 mm

tailstock quill stroke 100 mm

total power requirement 150 kVA

weight of the machine ca. 60 t

Description :

overhauled and modernized 2009 & 2012/2013
equipped with:
- CNC control Siemens 840D SL ShopTurn
- 2 supports with 1 controller each
- 4-jaw face plate
- 2 hydraulic steady rests (1760mm)
- hydraulic tailstock

Machine is dismantled and stored.

Datasheet

used Lathes Heavy Duty Lathe ZERBST DXP 5

IMZ Maschinen Vertriebs GmbH
Marie-Curie-Straße 19
73529 Schwäbisch Gmünd
Deutschland

0049 (0) 7171 987130
0049 (0) 7171 9871329
info@imz.de
www.imz.de

#1075-7029 · Heavy Duty Lathe

ZERBST - DXP 5 - - 1959 / 2012 - Sinumerik 840 D SL

Technical details

turning diameter over bed 3.520 mm︱turning diameter over slide rest 3.000 mm︱turning length 15.000 mm︱turning diameter over slide 2.440 mm︱control Sinumerik 840 D SL ︱turning speeds 50 U/min︱workpiece weight max. 80.000 kg︱turning diameter orig. 3500 / mod. 2400 mm︱accuracy +/- 0,01 °︱total power requirement 110 kW︱weight of the machine ca. 154,4 t︱dimensions of the machine ca. 20,7 x 6,0 m︱

- The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system. - In the course of the work, it became apparent that the two double-row cylindrical roller bearings had to be reworked.Thus, the entire bearing arrangement was modified and optimally adjusted. - In addition, control and safety-related points had to be modified. - Geometric acceptance report - Temperature behavior of the main spindle bearing arrangement - Test machining Machine is in very good condition. The technical data has been obtained to the best of our ability and belief. It is given in good faith, but its accuracy cannot be guaranteed.

turning diameter over bed 3.520 mm

turning diameter over slide rest 3.000 mm

turning length 15.000 mm

turning diameter over slide 2.440 mm

control Sinumerik 840 D SL

turning speeds 50 U/min

workpiece weight max. 80.000 kg

turning diameter orig. 3500 / mod. 2400 mm

accuracy +/- 0,01 °

total power requirement 110 kW

weight of the machine ca. 154,4 t

dimensions of the machine ca. 20,7 x 6,0 m

Description :

- The modernization (2012) carried out on this machine mainly comprises a new
mechanical main gearbox including
main spindle drive and the addition of a holding brake plus integration into
the existing electrical system.
- In the course of the work, it became apparent that the two double-row
cylindrical roller bearings had to be
reworked.Thus, the entire bearing arrangement was modified and optimally
adjusted.
- In addition, control and safety-related points had to be modified.
- Geometric acceptance report
- Temperature behavior of the main spindle bearing arrangement
- Test machining

Machine is in very good condition.

The technical data has been obtained to the best of our ability and belief.
It is given in good faith, but its accuracy cannot be guaranteed.

Datasheet

TOP Manufacturer:

WOHLENBERG - POREBA - KRAFT - SKODA - TACCHI - HEYLIGENSTAEDT - FRORIEP - MFD - HOESCH - NILES - WAGNER -