'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Lathe - cycle-controlled

          Machinelist: Lathe - cycle-controlled


          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled BOEHRINGER DUS 560x1500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-106 · Lathe - cycle-controlled

          BOEHRINGER - DUS 560x1500 - - 1996 - SIEMENS 810D

          Technical details
          turning diameter 560 mm︱turning length 1500 mm︱control SIEMENS 810D ︱taper in tailstock-quill MK 5 ︱turning speeds 2500 U/min︱spindle bore 62 mm︱total power requirement 19 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 3,8 x 1,8 x 1,9 m︱
          This BOEHRINGER DUS 560 is in very good condition
            turning diameter 560 mm
            turning length 1500 mm
            control SIEMENS 810D
            taper in tailstock-quill MK 5
            turning speeds 2500 U/min
            spindle bore 62 mm
            total power requirement 19 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 3,8 x 1,8 x 1,9 m
            Description :
            This BOEHRINGER DUS 560 is in very good condition


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled BOEHRINGER DUS 560 x 1250


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18395 · Lathe - cycle-controlled

          BOEHRINGER - DUS 560 x 1250 - - 1995 - Sinumerik 805 Siemens

          Technical details
          turning diameter 570 mm︱turning length 1250 mm︱control Sinumerik 805 Siemens︱clamping length ca 1200 mm︱greates pass round over bed 570 mm︱swing diameter over face slide 365 mm︱turning speed range - main spindle 3 - 2.500 min/-1︱power capacity - main spindel 15 / 19 kW︱spindle bore 62 mm︱spindle head DIN 55027 No. 8︱diameter of quill 80 mm︱taper of center MK 5 ︱quill stroke 190 mm︱total power requirement 40 kVA︱weight of the machine ca. 5,6 t︱
          Lathe cycle controled - SIEMENS Sinumerik 805 / Simeodrive 611 - 4-Jaw Chuck, Handwheel, Covering - Chip Tray & coolant - adjustable feet - approx 20 tool holders 2021 Electrics/controls check by Boehringer
            turning diameter 570 mm
            turning length 1250 mm
            control Sinumerik 805 Siemens
            clamping length ca 1200 mm
            greates pass round over bed 570 mm
            swing diameter over face slide 365 mm
            turning speed range - main spind. 3 - 2.500 min/-1
            power capacity - main spindel 15 / 19 kW
            spindle bore 62 mm
            spindle head DIN 55027 No. 8
            diameter of quill 80 mm
            taper of center MK 5
            quill stroke 190 mm
            total power requirement 40 kVA
            weight of the machine ca. 5,6 t
            Description :
            Lathe cycle controled
            - SIEMENS Sinumerik 805 / Simeodrive 611
            - 4-Jaw Chuck, Handwheel, Covering
            - Chip Tray & coolant
            - adjustable feet
            - approx 20 tool holders
            2021 Electrics/controls check by Boehringer


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled BOEHRINGER DNE 820/DL 3000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03780 · Lathe - cycle-controlled

          BOEHRINGER - DNE 820/DL 3000 - - 1983 -

          Technical details
          turning diameter 820 mm︱turning length 300 mm︱turning diameter over slide 465 mm︱control ︱max. torque on the spindle 3000 Nm︱turning speeds 5,6-1120 U/min︱Feed 1-5000 mm/min︱Rapid movement 5000 mm/min︱tailstock quill taper MT 6 ︱3 jaw chuck Forckrath mm︱steady mm︱main drive motor 50 kW︱diameter of main spindle 170 mm︱spindle passage 128 mm︱tailstock quill diameter 125 mm︱tailstock quill stroke 250 mm︱z-axis 3000 mm︱x-axis 550 mm︱total power requirement 52 kW︱weight of the machine ca. 7,1 t︱
            turning diameter 820 mm
            turning length 300 mm
            turning diameter over slide 465 mm
            max. torque on the spindle 3000 Nm
            turning speeds 5,6-1120 U/min
            Feed 1-5000 mm/min
            Rapid movement 5000 mm/min
            tailstock quill taper MT 6
            main drive motor 50 kW
            diameter of main spindle 170 mm
            spindle passage 128 mm
            tailstock quill diameter 125 mm
            tailstock quill stroke 250 mm
            z-axis 3000 mm
            x-axis 550 mm
            total power requirement 52 kW
            weight of the machine ca. 7,1 t
            Description :



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled BOEHRINGER DNE 820/DL 5000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03440 · Lathe - cycle-controlled

          BOEHRINGER - DNE 820/DL 5000 - - - B2T

          Technical details
          turning diameter 820 mm︱turning length 5000 mm︱turning diameter over slide 460 mm︱control B2T ︱max. torque on the spindle 3400 Nm︱turning speeds 5,6-1120 U/min︱Feed 1-5000 mm/min︱Rapid movement 5000 mm/min︱tailstock quill taper MT 6 ︱3 jaw chuck Forckrath 630 mm︱steady 525 mm︱steady 335 mm︱main drive motor 50 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 820 mm
            turning length 5000 mm
            turning diameter over slide 460 mm
            control B2T
            max. torque on the spindle 3400 Nm
            turning speeds 5,6-1120 U/min
            Feed 1-5000 mm/min
            Rapid movement 5000 mm/min
            tailstock quill taper MT 6
            3 jaw chuck Forckrath 630 mm
            steady 525 mm
            steady 335 mm
            main drive motor 50 kW
            Description :



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Cycle controlled Lathe from LagerMaschinen
          Cycle controlled Lathe from LagerMaschinen

          In the world of business and production management the cycle controlled lathe draws from several other instruments. Lathes are used in modern and classical carpentry as well as modern electrical and metal pipe work. As with any machine it's important to seek advice from top consultants when purchasing such an item. LagerMaschinen's wide selection of the the cycle controlled lathe will certainly make your choices easier. Please visit the website today to get started on LagerMaschinen.

          LagerMaschinen provides everything you need.

          LagerMaschinen's wide array of services offers its clients many opportunities. For instance you can have your new-but-used used machine correctly installed and connected - both electrically and within the entire computer network - so you can get back to production and production management. With a cycle controlled lathe from LagerMaschinen you'll also have free access to senders and machine experts and be able to ask advice as well as ensure the quality of your machine. LagerMaschinen's wide network in the machining industry means you'll be able to find the exact machine you need around the corner or at least know when you can 'give it a spin'. The cycle controlled lathe from LagerMaschinen - log on today.

          A used machine gets you where you want to be.

          The cycle controlled lathe from LagerMaschinen will certainly increase your bottom line - whether working in the plastics industry or in metalworks a cycle controlled lathe from LagerMaschinen can raise revenue annually and within the short term. Take advantage of LagerMaschinen's various add-ons such as customized delivery and installation. LagerMaschinen.de's cycle controlled lathe - start looking today.