Boring Machine - Automatic

spindle diameter 110 mm︱x-travel 1800 mm︱y-travel 1400 mm︱z-travel 1400 mm︱W-axis (spindle longitudinal) 600 mm︱max. table load 5 kg︱table-size 1250x1400 mm︱spindle drive 22 kW︱spindle taper 50 ISO︱spindle speed 10~3000 1/min︱Spindle motor torque 1000 Nm︱rapid speed (X/Y/Z/W):5/5/5/3 m/min︱feeds (X/Y/Z/W): 3/3/3/2 m/min︱positioning accuracy 0.025/1,000 mm (X/Y/Z), 0 ︱repeating accuracy 0.015 mm (X/Y/Z), 0.025 m mm︱total power requirement 50 kva︱weight of the machine ca. 18,5 t︱ ︱CE-design ︱spindle bearing SKF ︱

---

HBM-130 | HBM-130L | HBM- ︱spindle diameter 130|130|130 mm︱x-travel 1600|2000|2000 mm︱y-travel 1400|1800|1800 mm︱z-travel 2000 mm︱U-axis 250 mm︱W-axis (spindle longitudinal) 900 mm︱max. torque on the spindle 3200 Nm︱B-axis (table) 360x1 °︱rapid speed X/Y/Z/W: 2500 mm/min︱table load 8|10|10 t︱table-size 1600 x 1400|1800 x 1600|2 mm︱T-slots 9/11/12 Stk.︱T-slot - width 28 mm︱transmission ratio 4 Stk.︱spindle speed 4-800 1/min︱spindle taper 50 ISO︱faceplate Drehmoment: 4900 Nm︱faceplate 2.5-125 1/min︱faceplate Umdrehung stufenlos einst ︱

---

Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position by the collimator ? X,Y, Z, B axes DRO are available ? Spindle could choose ISO50, with automatic clamping 1. Introduce The horizontal boring and milling machine series HBM-130 of our company is suitable for such operation as drilling, counter-boring, boring, reaming, spot-facing, tapping and milling etc. Also the horizontal boring and milling machine type is equipped with fixed facing head on which radial facing slide can be radically feed consequently to enable the machine to undertake boring of large-diameter hole, external cutting ,end face turning and recessing, etc. The machine is composed of bed, front column, headstock, cross and longitudinal saddle, worktable, back column and balance weight pulley etc. The vertical movement of headstock goes along the column's guideway, the worktable can move transversely and longitudinally on the bed, and the worktable can be rotated. The characteristics of HBM-130 2.1 The big servo spindle 22KW motor supply continuously speed change and high torque output of headstock. Four speed range can be changed by the selector on the control panel. The infinit speed change in each range can be effected continuously and smoothly. It’s very simple and convenient for machine operation. Compare with old headstock structure, 24 steps speed changing by hydraulic, the failure rate will be reduced 80%. 2.2 The vertical coordinate ( headstock lifting direction ) and cross coordinate ( worktable transverse movement ) and longitudinal coordinate ( worktable longitudinal movement--option ) are provided with new type digital read out unit with memory function, which makes the machine with complete function and high accuracy. 2.3 Main parts of the machine such as bed, front column and guideways of longitudinal saddle are all hardened and ground, which bring high stiffness of the guideways and extend the using life of the machine. 2.4 The horizontal guideway surface of the machine is provided with all pull-board type dust-proof. 2.5 Electric-hydraulic interlocking device will be fixed between the moving units and when a moving unit is working, the other moving units will be clamped automatically (except spindle, radial facing slide). 2.6 In the rapid traverse gearbox, safety clutches are installed to prevent the machine from overload. 3. Transmission systems of the machine 3.1 Headstock transmission The rotation movement of boring spindle are driven by CTB servo spindle motor directly. Insteady of old design, 24 steps spindle speed, the spindle servo motor supply two range speed. Low spindle speed with big torque output and high spindle speed with stable and continuously cutting forece. 3.2 Feed motion The feed motion of all moving units of this machine is feeding per spindle revolution (e.g. traverse rate of spindle, headstock, table per spindle revolution).The power of various moving units comes from shaft driven by main driven motor. It can be transmitted through gears of speed-change device to shaft (the feed safety mechanism). After that the motion will be transmitted further through the forward and reverse mechanism, to the feed shaft, then to the lead-screw or gear racks of various moving units, enable the headstock, cross & longitudinal saddles to obtain each 18 steps feed rates at low and high gear respectively. The feed motion of the radial slide on the facing head comes from headstock, enable it to obtain various feed rates. 3.3 Rapid transmission system The rapid moving of the headstock,cross & longitudinal saddles of the machine and the rapid rotation of the rotary worktable are driven by AC motor mounted at the right side of the bed. Power from the motor is transmitted from shafts coupling and friction clutch to each moving units respectively, enable the spindle, headstock and cross & longitudinal saddles to obtain the rapid moving speed 2500mm/min, the rapid rotation of the worktable is 1r/min. 4. Hydraulic system of the machine The hydraulic system is located inside of longitudinal saddle of the machine, which is used for the transverse of headstock, longitudinal & cross movement, rotation of worktable, feed speed change and internal lubrication of headstock

HBM-110 | HBM-110L | HBM- ︱spindle diameter 110 mm︱x-travel 900|1250|1600 mm︱y-travel 900|900|1200 mm︱z-travel 1400|1400|1400 mm︱W-axis (spindle longitudinal) 600 mm︱B-axis (table) 360x1 °︱table load 5 t︱table-size 1100 x 960|1250 x 1100|12 mm︱T-slots 22 mm︱spindle speed 22 Stufen, 8-1000 1/min︱spindle taper 50 ISO︱rapid speed (X / Y / Z / W) 2500 mm/min︱speed - faceplate 4-200 1/min︱torqe of face plate 1960 Nm︱dia of faceplate 630 mm︱movement of facing slide 180 mm︱weight of the machine ca. 11,5|18|20 t︱main drive 7,5 kW︱Machine size (LxWxH) 5120x3380x3100 mm︱

---

spindle diameter 110 mm︱x-travel 1600 mm︱y-travel 1000 mm︱z-travel 1250 mm︱w-axis Ausfahren der Spindel: 40 mm︱B-axis (table) 360 x 1° mm︱Distance table/spindle center 0-1000 mm︱table load 2,5 t︱table-size 1000x800 mm︱T-slot (width-distance-quantity) 22H8 x 7 x 100 mm︱tool taper 50 ISO︱spindle turning speed - stepless 2 Stufen: 20-1000 1/min︱feeds X/Y/Z-Achse: 3-950 mm/min︱feeds W-Achse: 3-400 mm/min︱rapid speed X/Y/Z-Achse: 2,8 m/min︱rapid speed W-Achse: 2 m/min︱main drive 15 kw (drehzahlgeregelt) ︱feed motors X/Y/Z-Achse-Servomotoren: kW︱Feed motor W-Achse-Servomotor: 1,3 kW︱range L-W-H 3.874 x 4.317x3.715 mm︱

---

HBM-110L ︱spindle diameter 110 mm︱x-travel 900 mm︱y-travel 900 mm︱z-travel 1400 mm︱W-axis (spindle longitudinal) 600 mm︱U-axis Planschieber: 180 mm︱B-axis (table) 360x1 °︱table load 5 t︱table-size 1100x960 mm︱T-slots 22 Stk.︱spindle speed 22 Stufen, 8-1000 1/min︱spindle taper 50 ISO︱rapid speed (X / Y / Z / W) 2500 mm/min︱speed - faceplate 4-200 (18 Stufen) 1/min︱torqe of face plate 1960 Nm︱dia of faceplate 600 mm︱movement of facing slide 180 mm︱weight of the machine ca. 11500 kg︱main drive 7,5 kW︱

---

spindle diameter 130 mm︱x-travel 2000 mm︱y-travel 2000 mm︱z-axis 2500 mm︱w-axis 1020 mm︱spindle nose 50 ISO︱turning speeds steps Stufen︱turning speed range 2-1000 U/min︱radial face slide travel mm︱table surface area 2000x1800 mm︱max. table load 15 t︱dimensions of the machine ca. mm︱weight of the machine ca. 40 t︱spindle drive 30 kW︱DRO ︱hydr. clamping of the axes ︱hydr. table clamping ︱4 jaw chuck 650 mm︱ball screw in axes ︱

---

Unused table boring machine, make SMTCL, type TPX 6111B MAIN FEATURES: Powerful, flexible and productive With an optimal price / performance ratio Short and sweet üCompact, rigid cast-iron construction ü Sturdy four-pointed guides, which are hardened and precision ground, guarantee accurate working for many years üMechanical functions, which can not be operated simultaneously, are locked against each other üX, Y-axis has a DRO display with memory function üSpindle with tool holder ISO50 and automatic clamping system üSpindelstock and feed gear are equipped with an overload clutch üthe machine is equipped with a thread cutting device üPlan disk and drilling spindle have the different functions Different speed ranges which are dependent on their tasks ütable rotatable over 360 ° (optional with display of the degree setting) üTelescopic steel covers protect the guides against chips and soiling üwith variable speed drive and 3-axis servo motor üWeight compensation for headstock üHighest workpiece weight from 2000 to 6000kg üSpindle displacement in high-precision bearings without clearance üCoating spindle from 90 mm - 130 mm diameter - extendable 600 - 900 mm (W-axis) üAutomatic tool clamping üAutomatic lubrication of the guideways Further technical data and accessories, according to the appendix. Benefit from the favorable leasing and hire-purchase conditions of ABC Leasing. Ask us about it. Of course, you also receive from us free delivery, assembly / commissioning and ready-to-hand transfer as well as control training.