'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Bed Type Milling Machine - Vertical

          Machinelist: Bed Type Milling Machine - Vertical


          Bed Type Milling Machine - Vertical

          used Milling machines Bed Type Milling Machine - Vertical WAGNER WBE1300R


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3140034 · Bed Type Milling Machine - Vertical

          WAGNER - WBE1300R - - 2014 -

          Technical details
          x-travel 1300 mm︱y-travel 500 mm︱z-travel 570 mm︱spindle taper SK40 ︱spindle turning speed - stepless 60 - 6000 U/min︱rapid traverse x/y/z 7,5 m/min︱Number of tools 16 St.︱table surface area 1500 x 400 mm︱workpiece weight 700 kg︱total power requirement 12 kW︱weight of the machine ca. 4100 kg︱dimensions of the machine ca. 3800 x 3800 x 2800 mm︱
          - SIEMENS control SINUMERIK 828D - automatic tool clamping - Cooling device - automatic central lubrication - Chip tray - Full enclosure - Operation manual
            x-travel 1300 mm
            y-travel 500 mm
            z-travel 570 mm
            spindle taper SK40
            spindle turning speed - stepless 60 - 6000 U/min
            rapid traverse x/y/z 7,5 m/min
            Number of tools 16 St.
            table surface area 1500 x 400 mm
            workpiece weight 700 kg
            total power requirement 12 kW
            weight of the machine ca. 4100 kg
            dimensions of the machine ca. 3800 x 3800 x 2800 mm
            Description :
            - SIEMENS control SINUMERIK 828D
            - automatic tool clamping
            - Cooling device
            - automatic central lubrication
            - Chip tray
            - Full enclosure
            - Operation manual


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical KIHEUNG Point U6


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-33116 · Bed Type Milling Machine - Vertical

          KIHEUNG - Point U6 - - 2012 - Heidenhain TNC 124

          Technical details
          x-travel 1600 mm︱y-travel 710 mm︱z-travel 710 mm︱Control Heidenhain TNC 124 ︱turning speed range - main spindle 12 - 1600 min/-1︱tool taper SK50 ︱table surface area 2200 x 550 mm︱max. table load 3000 kg︱number of T-slots 5 ︱T-slot - width 20 mm︱T-slot - distance 9 mm︱rapid travel x/y/z 5 / 5 / 2,5 mm/min︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,5 x 2,80 x 2,75 m︱
          Universal bed milling machine - Huron head manual - automatic Tool clamping - Handwheel - Central lubrication - Machine light - Table enclosure - Footswitch - Documentation
            x-travel 1600 mm
            y-travel 710 mm
            z-travel 710 mm
            Control Heidenhain TNC 124
            turning speed range - main spind. 12 - 1600 min/-1
            tool taper SK50
            table surface area 2200 x 550 mm
            max. table load 3000 kg
            number of T-slots 5
            T-slot - width 20 mm
            T-slot - distance 9 mm
            rapid travel x/y/z 5 / 5 / 2,5 mm/min
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3,5 x 2,80 x 2,75 m
            Description :
            Universal bed milling machine
            - Huron head manual
            - automatic Tool clamping
            - Handwheel
            - Central lubrication
            - Machine light
            - Table enclosure
            - Footswitch
            - Documentation


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical KIHEUNG Point U6


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023067 · Bed Type Milling Machine - Vertical

          KIHEUNG - Point U6 - - 2012 - Heidenhain TNC 124

          Technical details
          x-travel 1600 mm︱y-travel 720 mm︱z-travel 760 mm︱Control Heidenhain TNC 124 ︱main spindle: ︱turning speed range - main spindle 12 - 1600 min/-1︱tool taper SK50 ︱work table: ︱table surface area 2200 x 550 mm︱max. table load 3000 kg︱number of T-slots 5 ︱T-slot - width 20 mm︱T-slot - distance 80 mm︱feeds: ︱rapid travel x/y/z 5 / 5 / 2,5 mm/min︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,76 x 2,85 x 3,05 m︱
          In our opinion, the machine is in good condition and can be inspected under power by appointment. Technical features: - The machine has a universal milling head ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            x-travel 1600 mm
            y-travel 720 mm
            z-travel 760 mm
            Control Heidenhain TNC 124
            turning speed range - main spind. 12 - 1600 min/-1
            tool taper SK50
            table surface area 2200 x 550 mm
            max. table load 3000 kg
            number of T-slots 5
            T-slot - width 20 mm
            T-slot - distance 80 mm
            rapid travel x/y/z 5 / 5 / 2,5 mm/min
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,76 x 2,85 x 3,05 m
            Description :
            In our opinion, the machine is in good condition and
            can be inspected under power by appointment.

            Technical features:
            - The machine has a universal milling head

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical Kao Ming 332M Multi Face


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F435 · Bed Type Milling Machine - Vertical

          Kao Ming - 332M Multi Face - - 2009 -

          Technical details
          CNC brand Fanuc ︱CNC model 18i-MB ︱Table length 3000 mm︱Table width 2600 mm︱Maximum table load 12 T︱X 3230 mm︱Y 3850 mm︱Z 1100 mm︱Spindle taper ISO 50 ︱Number of pallets 1 ︱Rapid traverse 10 m/min︱Speed 8000 RPM︱Tool changer 30 ︱Distance between columns 3200 mm︱Distance between spindle and table 1425 mm︱Along feed 5 mm/min︱Motor 22/26 kW︱Machine dimensions (lxwxh) 8130 x 7493 x 5080 mm︱Machine weight 44000 kg︱
          With chipconveyor and chip bucket Max. Table load: 12.000 kg Motor spil: 22/26 kW Tools vertical: - Length max. 350 mm - Diam. max. 130 mm ø - Max. diam with 3 places next to it occupied 200 mm ø - Max. weight 20 kg
            CNC brand Fanuc
            CNC model 18i-MB
            Table length 3000 mm
            Table width 2600 mm
            Maximum table load 12 T
            X 3230 mm
            Y 3850 mm
            Z 1100 mm
            Spindle taper ISO 50
            Number of pallets 1
            Rapid traverse 10 m/min
            Speed 8000 RPM
            Tool changer 30
            Distance between columns 3200 mm
            Distance between spindle and tab. 1425 mm
            Along feed 5 mm/min
            Motor 22/26 kW
            Machine dimensions (lxwxh) 8130 x 7493 x 5080 mm
            Machine weight 44000 kg
            Description :
            With chipconveyor and chip bucket
            Max. Table load: 12.000 kg
            Motor spil: 22/26 kW
            Tools vertical:
            - Length max. 350 mm
            - Diam. max. 130 mm ø
            - Max. diam with 3 places next to it occupied 200 mm ø
            - Max. weight 20 kg


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical Soraluce Soramill SL 5.000


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F336 · Bed Type Milling Machine - Vertical

          Soraluce - Soramill SL 5.000 - - 1995 -

          Technical details
          CNC brand Heidenhain ︱CNC model TNC 415 B ︱Table length 5000 mm︱Table width 800 mm︱Maximum table load 12,5 T︱X 3500 mm︱Y 900 mm︱Z 1000 mm︱Spindle taper ISO 50 ︱Number of pallets 1 ︱Rapid traverse 12 m/min︱Speed 2000 RPM︱Indexing per 2,5 °︱Motor 22 kW︱Power 22 kVA︱Machine dimensions (lxwxh) 7250 x 3900 x 3200 mm︱Machine weight 16500 kg︱
          Portal bed milling machine Color display Coolant treatment CNC controlled milling head Chip conveyor Milling head is 100% overhauled
            CNC brand Heidenhain
            CNC model TNC 415 B
            Table length 5000 mm
            Table width 800 mm
            Maximum table load 12,5 T
            X 3500 mm
            Y 900 mm
            Z 1000 mm
            Spindle taper ISO 50
            Number of pallets 1
            Rapid traverse 12 m/min
            Speed 2000 RPM
            Indexing per 2,5 °
            Motor 22 kW
            Power 22 kVA
            Machine dimensions (lxwxh) 7250 x 3900 x 3200 mm
            Machine weight 16500 kg
            Description :
            Portal bed milling machine
            Color display
            Coolant treatment
            CNC controlled milling head
            Chip conveyor
            Milling head is 100% overhauled


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical RAMBAUDI Rammatic 804


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4378 · Bed Type Milling Machine - Vertical

          RAMBAUDI - Rammatic 804 - - 1992 - Heidenhain iTNC 530

          Technical details
          x-travel 1500 mm︱y-travel 815 mm︱z-travel 815 mm︱Control Heidenhain iTNC 530 ︱total power requirement 4 x 11 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 8 x 4 x 4,5 m︱
          bed milling machine retrofit 2010 - good general conditionSpace requirement approx. 8 x 4 x 4.5 mWeight approx. 20 toMovie:https://www.youtube.com/watch?v=_NESVeaukAQ&t=15s Transport dimensions Basic machine approx. 6 LM x 3 x 3.50 mSwitch cabinet approx. 2.6 x 0.6 x 2.6 mHydraulics, various sheet metal parts and accessories approx. 4 LMPreis EXW 4 - milling heads / alternatively 1/2/3/4-fold applicablequill stroke 150 mmClamping table 3250 x 815 mm table load 5000 kgSpindle SK 50Speed range 40-3600 min-1 Workspace: 1500 x 815 x 815 Drive: 4 x 11 Control: Heidenhain iTNC 530
            x-travel 1500 mm
            y-travel 815 mm
            z-travel 815 mm
            Control Heidenhain iTNC 530
            total power requirement 4 x 11 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 8 x 4 x 4,5 m
            Description :
            bed milling machine

            retrofit 2010 - good general conditionSpace requirement approx. 8 x 4 x 4.5 mWeight approx. 20 toMovie:https://www.youtube.com/watch?v=_NESVeaukAQ&t=15s Transport dimensions Basic machine approx. 6 LM x 3 x 3.50 mSwitch cabinet approx. 2.6 x 0.6 x 2.6 mHydraulics, various sheet metal parts and accessories approx. 4 LMPreis EXW
            4 - milling heads / alternatively 1/2/3/4-fold applicablequill stroke 150 mmClamping table 3250 x 815 mm table load 5000 kgSpindle SK 50Speed range 40-3600 min-1
            Workspace: 1500 x 815 x 815
            Drive: 4 x 11
            Control: Heidenhain iTNC 530


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical RECKERMANN Beta 10 Kombi


          • desba TRADING
          • Im Hofgarten 6
          • 61130 Nidderau
          • Deutschland

          • +49 (0)6187 20 30 749
          • info@desba-trading.de
            www.desba-trading.de
          #2072-2134 · Bed Type Milling Machine - Vertical

          RECKERMANN - Beta 10 Kombi - - 1987 - Heidenhain TNC 155

          Technical details
          x-travel 1500 mm︱y-travel 600 mm︱z-travel 450 mm︱Control Heidenhain TNC 155 ︱total power requirement 28,4 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. m︱
            x-travel 1500 mm
            y-travel 600 mm
            z-travel 450 mm
            Control Heidenhain TNC 155
            total power requirement 28,4 kW
            weight of the machine ca. 5,5 t


        • desba TRADING
        • Im Hofgarten 6
        • 61130 Nidderau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN LFAS2000L30ke


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03431 · Bed Type Milling Machine - Vertical

          DROOP & REIN - LFAS2000L30ke - - 1986 - Fidia

          Technical details
          x-travel 3300 mm︱y-travel 2200 mm︱z-travel 1300 mm︱w-axis 350 mm︱workpiece height 1700 mm︱milling spindle diameter 140 mm︱diameter of quill 230 mm︱milling head speed 40-2000 U/min︱transmission ratio 4 ︱table surface area 4260x2000 mm︱T-slot - distance 175 mm︱T-slot - width 28 mm︱number of T-slots 11 ︱workpiece weight 300000 kg︱milling spindle motor 30 kW︱Feed 5-3000 mm/min︱control Fidia ︱total power requirement kW︱weight of the machine ca. 80 t︱dimensions of the machine ca. m︱
            x-travel 3300 mm
            y-travel 2200 mm
            z-travel 1300 mm
            w-axis 350 mm
            workpiece height 1700 mm
            milling spindle diameter 140 mm
            diameter of quill 230 mm
            milling head speed 40-2000 U/min
            transmission ratio 4
            table surface area 4260x2000 mm
            T-slot - distance 175 mm
            T-slot - width 28 mm
            number of T-slots 11
            workpiece weight 300000 kg
            milling spindle motor 30 kW
            Feed 5-3000 mm/min
            control Fidia
            weight of the machine ca. 80 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN LFAS2000Kc


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03247 · Bed Type Milling Machine - Vertical

          DROOP & REIN - LFAS2000Kc - - 1983 - Heindenhain

          Technical details
          x-travel 4000 mm︱y-travel 2000 mm︱z-travel 1300 mm︱Control Heindenhain ︱type TNC530i ︱table surface area 5200x2000 mm︱Table load 30000 kg︱pinole diameter 230 mm︱number of T-slots 11 ︱T-slot - width 28 mm︱T-slot - distance 175 mm︱spindle taper ISO 50 ︱turning speeds 40-2000 U/min︱spindle motor 30 kW︱transmission ratio 4 ︱total power requirement kW︱weight of the machine ca. 70 t︱dimensions of the machine ca. 10x5,5x5,8 m︱
          Maschine wurde überholt machine is retofit
            x-travel 4000 mm
            y-travel 2000 mm
            z-travel 1300 mm
            Control Heindenhain
            type TNC530i
            table surface area 5200x2000 mm
            Table load 30000 kg
            pinole diameter 230 mm
            number of T-slots 11
            T-slot - width 28 mm
            T-slot - distance 175 mm
            spindle taper ISO 50
            turning speeds 40-2000 U/min
            spindle motor 30 kW
            transmission ratio 4
            weight of the machine ca. 70 t
            dimensions of the machine ca. 10x5,5x5,8 m
            Description :
            Maschine wurde überholt
            machine is retofit


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Bed Type Milling Machine - Vertical DROOP & REIN FS 130 gke


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03244 · Bed Type Milling Machine - Vertical

          DROOP & REIN - FS 130 gke - - 1971 - Heidenhain

          Technical details
          x-travel 2000 mm︱y-travel 1000 mm︱z-travel 1000 mm︱Control Heidenhain ︱type TNC 430 ︱spindle turning speed range 15-1450 U/min︱Table area 2300x1200 mm︱Spindle 200 mm︱spindle stroke 200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Nr 3762 Maschine wurde überholt machine is retofit
            x-travel 2000 mm
            y-travel 1000 mm
            z-travel 1000 mm
            Control Heidenhain
            type TNC 430
            spindle turning speed range 15-1450 U/min
            Table area 2300x1200 mm
            Spindle 200 mm
            spindle stroke 200 mm
            Description :
            Nr 3762
            Maschine wurde überholt
            machine is retofit


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact

          Lateral Milling Machine

          used Milling machines Lateral Milling Machine JOBS JOMACH 159


          • Franz Hoppe GmbH
          • Im Hasseldamm 1
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 21 61 / 67 79 20
            +49 (0) 21 61 / 67 34 56
          • mail@hoppe-maschinen.de
            www.hoppe-maschinen.de
          #1015-456747 · Lateral Milling Machine

          JOBS - JOMACH 159 - - 2005 - SIEMENS-SINUMERK 840 D

          Technical details
          x-travel 18000 mm︱y-travel 2500 mm︱z-travel 1250 mm︱Control SIEMENS-SINUMERK 840 D ︱spindle taper HSK-A 80 ︱spindle turning speed range 10 - 10000 U/min︱feeds longditudinal/cross/vertical 1 - 16000 mm/min︱drive milling spindle 31 kW︱total power requirement 65 kW︱weight of the machine ca. 0 t︱dimensions of the machine ca. 25,5 x 10 x 5,2 m︱
          * spindle on appr. 13,721 h * CNC-control in 5 axis by SIEMENS SINUMERIK 840 D * CNC universal milling head A-axis = +-90° - C-axis = 400° (+200/-200°) * 52-fold tool changer
            x-travel 18000 mm
            y-travel 2500 mm
            z-travel 1250 mm
            Control SIEMENS-SINUMERK 840 D
            spindle taper HSK-A 80
            spindle turning speed range 10 - 10000 U/min
            feeds longditudinal/cross/vertic. 1 - 16000 mm/min
            drive milling spindle 31 kW
            total power requirement 65 kW
            dimensions of the machine ca. 25,5 x 10 x 5,2 m
            Description :
            * spindle on appr. 13,721 h

            * CNC-control in 5 axis by SIEMENS SINUMERIK 840 D

            * CNC universal milling head A-axis = +-90° - C-axis = 400° (+200/-200°)

            * 52-fold tool changer


        • Franz Hoppe GmbH
        • Im Hasseldamm 1
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact

          Travelling column milling machine

          used Milling machines Travelling column milling machine AXA VHC 3 XTS


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20250 · Travelling column milling machine

          AXA - VHC 3 XTS - - 2018 - Heidenhain TNC 640

          Technical details
          x-travel 4000 mm︱y-travel 1000 mm︱z-travel 950 mm︱Control Heidenhain TNC 640 ︱distance spindle nose and table 40 - 890 mm︱Main spindle: ︱turning speed range - main spindle 30 - 12.000 min/-1︱power capacity - main spindel 40 kW︱max. Torque 191 Nm︱swivellable +/- 90 °︱indexing 0,001 °︱tool taper SK 40 ︱work table: ︱table surface area 4400 x 1000 mm︱number of T-slots 5 ︱rotary table dia. 1250 mm︱max. table load 1200 kg/m²︱Tool-Presetter: ︱number of toolpositions 36 pos.︱tool taper SK 40
          Travelling column machining centre - CNC Control Heidenhain TNC 640 - Electronic handwheel with 2 m spiral cable - Pendel operation - Extension of stroke Y to 1000 mm and Z to 950 mm, table width 1000 mm OM-- Extension of basic tool magazine from 22 to 36 places - Infinitely adjustable NC-tilting head in 1 axis, freely interpolatable - Increased power of main drive - Speed range 30-12.000 rpm - Internal cooling 20 bar - Cooling through the spindle centre by means ofpressurised air flow - Preparation for chip conveyor, incl. wiring - AXA RTA 5TF-1250 rotary table -- Integration of rotary table into fixed table with curvature adjustment - 2 pcs of manual rinsing gun for cooling water cleaning - workpiece probe Blum TC60, radiobeam - Tool cable probe Blum ZX Speed - Preparation of the cabin for extraction ofmist from machining
            x-travel 4000 mm
            y-travel 1000 mm
            z-travel 950 mm
            Control Heidenhain TNC 640
            distance spindle nose and table 40 - 890 mm
            turning speed range - main spind. 30 - 12.000 min/-1
            power capacity - main spindel 40 kW
            max. Torque 191 Nm
            swivellable +/- 90 °
            indexing 0,001 °
            tool taper SK 40
            table surface area 4400 x 1000 mm
            number of T-slots 5
            rotary table dia. 1250 mm
            max. table load 1200 kg/m²
            number of toolpositions 36 pos.
            tool taper SK 40
            Description :
            Travelling column machining centre

            - CNC Control Heidenhain TNC 640
            - Electronic handwheel with 2 m spiral cable
            - Pendel operation
            - Extension of stroke Y to 1000 mm and Z to 950 mm, table width 1000 mm OM--
            Extension of basic tool magazine from 22 to 36 places
            - Infinitely adjustable NC-tilting head in 1 axis, freely interpolatable
            - Increased power of main drive
            - Speed range 30-12.000 rpm
            - Internal cooling 20 bar
            - Cooling through the spindle centre by means ofpressurised air flow
            - Preparation for chip conveyor, incl. wiring
            - AXA RTA 5TF-1250 rotary table
            -- Integration of rotary table into fixed table with curvature adjustment
            - 2 pcs of manual rinsing gun for cooling water cleaning
            - workpiece probe Blum TC60, radiobeam
            - Tool cable probe Blum ZX Speed
            - Preparation of the cabin for extraction ofmist from machining


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine IBARMIA ZV 58 / 7000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20249 · Travelling column milling machine

          IBARMIA - ZV 58 / 7000 - - 2018 - Heidenhain TNC 640

          Technical details
          travel -x axis 7000 mm︱travel -y axis 1000 mm︱travel -z axis 1000 mm︱control Heidenhain TNC 640 ︱number of spindle speeds 12000 U/min︱spindle motor 84 kW︱table length 7600 mm︱table width 1050 mm︱workpiece weight max. 2000 kg/m²︱distance table/vertical head 100 - 1100 mm︱tool taper ISO 50 ︱Automatic tool changer 60 Stk.︱total power requirement ca 60 kW︱Dimensions (L x W x H) 8.850 x 5.615 x 3.600 mm︱weight of the machine ca 40t kg︱
          - CNC Control Heidenhain TNC 640 - ATC 60-fold (ISO 50) - Coolant with paper band filter - Tool Probe Renishaw - Spindle Hours: 6500h
            travel -x axis 7000 mm
            travel -y axis 1000 mm
            travel -z axis 1000 mm
            control Heidenhain TNC 640
            number of spindle speeds 12000 U/min
            spindle motor 84 kW
            table length 7600 mm
            table width 1050 mm
            workpiece weight max. 2000 kg/m²
            distance table/vertical head 100 - 1100 mm
            tool taper ISO 50
            Automatic tool changer 60 Stk.
            total power requirement ca 60 kW
            Dimensions (L x W x H) 8.850 x 5.615 x 3.600 mm
            weight of the machine ca 40t kg
            Description :
            - CNC Control Heidenhain TNC 640
            - ATC 60-fold (ISO 50)
            - Coolant with paper band filter
            - Tool Probe Renishaw
            -
            Spindle Hours: 6500h



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine PARPAS SHARK One


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-15921 · Travelling column milling machine

          PARPAS - SHARK One - - 2016 - HEIDENHAIN iTNC 530 HSCI

          Technical details
          x-travel 3500 mm︱y-travel 1083 mm︱z-travel 1074 mm︱control HEIDENHAIN iTNC 530 HSCI ︱clamping table - ︱surface area 4.000 x 1.000 mm︱Thread bore with fitting - ︱Feeds - ︱X-, Y- and Z-axis, stepless 2 - 30.000 mm/min︱rapid travel x/y/z 30 m/min︱Max. feed force of axis 10.000 N︱2-axis Milling Head - ︱2-axis milling head TUB-E92 with power on - ︱Torque-Motors for 5-axis-simultaneos processing - ︱capacity at 100% load 29 kW︱Speed stepless 2- 30.000 ︱max. torque 92 Nm︱Max. torque 60 min-1︱tool taper HSK 62A-DIN 69893 ︱automatic tool changer ATC -
          GEquipment • Machine bed, column and vertical saddle as welded steel construction, annealed with low tension • Milling slider as welded steel construction • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors • Oil cooling unit for cooling the milling head • CNC thermal compensation • Spindle drive 29 kW • Spindle speed max. 18.000 min-1 • Axle drives by means of precision ball screws and digital servo motors • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles • Milling head Measurement “Kinematics Opt” • Laser tool presetter BLUM - NT version mounted on machine table • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable • swivelling control panel for machine operation in front of the machine • Automatic tool changer with 30 magazine places, change position vertical • Coolant system with external shower rim and IKZ through the spindle • 1 chip conveyor in the working area, ejection right • Pretensioned linear guides in all axes • Precision ball screws in Y- and Z-axis • X-axis drive via gear rack and master/slave drive • Hydraulic weight compensation in the vertical axis • Bellows cover of the X-axis • Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed • Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table. Safety fencing for the back machine area with two secured access doors.
            x-travel 3500 mm
            y-travel 1083 mm
            z-travel 1074 mm
            control HEIDENHAIN iTNC 530 HSCI
            clamping table -
            surface area 4.000 x 1.000 mm
            Thread bore with fitting -
            Feeds -
            X-, Y- and Z-axis, stepless 2 - 30.000 mm/min
            rapid travel x/y/z 30 m/min
            Max. feed force of axis 10.000 N
            2-axis Milling Head -
            2-axis milling head TUB-E92 with. -
            Torque-Motors for 5-axis-simulta. -
            capacity at 100% load 29 kW
            Speed stepless 2- 30.000
            max. torque 92 Nm
            Max. torque 60 min-1
            tool taper HSK 62A-DIN 69893
            automatic tool changer ATC -
            Description :
            GEquipment
            • Machine bed, column and vertical saddle as welded steel construction,
            annealed with low tension
            • Milling slider as welded steel construction
            • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive
            via torque motors
            • Oil cooling unit for cooling the milling head
            • CNC thermal compensation
            • Spindle drive 29 kW
            • Spindle speed max. 18.000 min-1
            • Axle drives by means of precision ball screws and digital servo motors
            • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and
            automatic measuring cycles
            • Milling head Measurement “Kinematics Opt”
            • Laser tool presetter BLUM - NT version mounted on machine table
            • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology
            • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable
            • swivelling control panel for machine operation in front of the machine
            • Automatic tool changer with 30 magazine places, change position vertical
            • Coolant system with external shower rim and IKZ through the spindle
            • 1 chip conveyor in the working area, ejection right
            • Pretensioned linear guides in all axes
            • Precision ball screws in Y- and Z-axis
            • X-axis drive via gear rack and master/slave drive
            • Hydraulic weight compensation in the vertical axis
            • Bellows cover of the X-axis
            • Milling slide above and below in the vertical axis with bellows covers
            with attached stainless steel lamellas closed
            • Work area enclosure closed on all sides. Back side of the work area with
            bellows cover with attached stainless steel lamellas closed. The manual sliding
            doors on the front of the machine can be opened and closed over the entire
            length of the table.
            Safety fencing for the back machine area with two secured access doors.



        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine CHIRON Mill FX 800


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9167 · Travelling column milling machine

          CHIRON - Mill FX 800 - - 2015 - TNC 640 Millturn Heidenhain

          Technical details
          x-travel 800 mm︱y-travel 630 mm︱z-travel 550 mm︱control TNC 640 Millturn Heidenhain︱Main spindle ︱turning speed range - main spindle max. 12.000 U/min︱power capacity - main spindel 7,5 - 22,5 kW︱max. Torque 140 Nm︱tool taper HSK-A 63 ︱NC-Rotary table: ︱faceplate diameter 280 mm︱T-slots H7 x 50 ︱measuring system ECN 225 ︱swivellable +/-120 °︱Torque max. 180 Nm︱Holding Torque 800 Nm︱max. table load 320 kg︱turning speeds 200 min/-1︱Tool-Presetter: ︱numbers of positions in the tool changer 40
          CNC - Travelling Column Milling Machine CHIRON - Mill FX 800
            x-travel 800 mm
            y-travel 630 mm
            z-travel 550 mm
            control TNC 640 Millturn Heidenhain
            turning speed range - main spind. max. 12.000 U/min
            power capacity - main spindel 7,5 - 22,5 kW
            max. Torque 140 Nm
            tool taper HSK-A 63
            faceplate diameter 280 mm
            T-slots H7 x 50
            measuring system ECN 225
            swivellable +/-120 °
            Torque max. 180 Nm
            Holding Torque 800 Nm
            max. table load 320 kg
            turning speeds 200 min/-1
            numbers of positions in the tool. 40
            Description :
            CNC - Travelling Column Milling Machine
            CHIRON - Mill FX 800


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine FPT SPIRIT 140


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1620 · Travelling column milling machine

          FPT - SPIRIT 140 - - 2014 - Siemens 840 Dsl

          Technical details
          - - - - - travels - - - - - - - - - - -︱travel -x axis 10.000 mm︱travel -y axis 1.500 mm︱travel -z axis 4.000 mm︱- - - spindle - - - - - - - - -︱output 62.5 kW︱turning speed range 262 - 4.000 U/min︱Torque 2.280 Nm︱- - - table - - - - - - - - -︱Size of table plate 2x (2.500 x 3.000) mm︱longitudinal travel 2.000 mm︱max. load 30.000 kg︱solution 0,0005 °︱solution 1,8 sek.︱table turning speeds 1,5 U/min︱- - - further technical details - - - - - - ︱control Siemens 840 Dsl ︱numbers of positions in the tool changer 80 ︱tool taper ISO 50 ︱max. feed 25.000 mm/min︱
          Milling machine | SPIRIT 140 - 2014 equipped with two HYDROSTATIC rotary boring tables (TRT30). The machine has only approx. 9.900 H working hours. Equipment: - Hydrostatic guideways - Cooling system - Handwheel with radio transmission (HBG 800-DP) - ITC (40 bar) - Tool changer (80 pcs. | ISO50) - Magazine for changing the milling heads with 3 places - Infinitely positionable universal head - Horizontal spindle extension (long version) - chip conveyor - Laser probe with software for tool measurement and breakage control - Radio measuring probe (M&H) - Pendulum processing with partition The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SPIRIT-140 | SPIRIT140"
            - - - - - travels - - - - - - - - - - -
            travel -x axis 10.000 mm
            travel -y axis 1.500 mm
            travel -z axis 4.000 mm
            - - - spindle - - - - - - - - -
            output 62.5 kW
            turning speed range 262 - 4.000 U/min
            Torque 2.280 Nm
            - - - table - - - - - - - - -
            Size of table plate 2x (2.500 x 3.000) mm
            longitudinal travel 2.000 mm
            max. load 30.000 kg
            solution 0,0005 °
            solution 1,8 sek.
            table turning speeds 1,5 U/min
            - - - further technical details . - - -
            control Siemens 840 Dsl
            numbers of positions in the tool. 80
            tool taper ISO 50
            max. feed 25.000 mm/min
            Description :
            Milling machine | SPIRIT 140 - 2014 equipped with
            two HYDROSTATIC rotary boring tables (TRT30).


            The machine has only approx. 9.900 H working hours.

            Equipment:
            - Hydrostatic guideways
            - Cooling system
            - Handwheel with radio transmission (HBG 800-DP)
            - ITC (40 bar)
            - Tool changer (80 pcs. | ISO50)
            - Magazine for changing the milling heads with 3 places
            - Infinitely positionable universal head
            - Horizontal spindle extension (long version)
            - chip conveyor
            - Laser probe with software for tool measurement and breakage control
            - Radio measuring probe (M&H)
            - Pendulum processing with partition


            The machine is in very good condition.


            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.


            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: SPIRIT-140 | SPIRIT140"



        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine CORREA/ANAYAK HVM80


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1110070 · Travelling column milling machine

          CORREA/ANAYAK - HVM80 - - 2014 - Heidenhain Itnc 530

          Technical details
          x-travel 8000 mm︱y-travel 1500 mm︱z-travel 2500 mm︱Control Heidenhain Itnc 530 ︱total power requirement 96 kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. m︱
          Brand: CORREA/ANAYAK Typ: HVM 80 Build in : 2014 travel X/Y/Z 8,000 x 1,500 x 2,500 mm, Spindel : max. 6000 Rpm Spindelpower 28 Kw as extra :high frequency spindle, type HFS IMT Mold, max. 26,000 rpm, max. 11 kW, table dim. (floorplates)8,000 x 2,500 x 300 mm, T-slots 22 H12, distance T- slots 250 mm, table load max. 15,000 kg/m², distance spindle - column max. 1,675 mm, feeds X/Y/Z max. 30,000 mm/min, Total power 96 Kw machine weight 55,000 kg, column 12,000 kg, platen 16,000 kg, 2x CNC screen control, make Heidenhain, type CNC I 530, autom. tool changer, chain type, max. 60 tools, tool holder SK50, tool weight max. 25 kg, tool L max. 400 mm, radio manual control panel, make Heidenhain, type HR-550, telediagnosis system, autom. universal milling head, external cooling, max. 5 bar, self-cleaning filter, tank, volume 600 l, tool outside air cooling, tool inside air cooling, hinged belt chip conveyor, protective housing, tool measuring probe M&H 20.41, control cabinet, ser. No. 218/14,
            x-travel 8000 mm
            y-travel 1500 mm
            z-travel 2500 mm
            Control Heidenhain Itnc 530
            total power requirement 96 kW
            weight of the machine ca. 55 t
            Description :
            Brand: CORREA/ANAYAK
            Typ: HVM 80
            Build in : 2014


            travel X/Y/Z 8,000 x 1,500 x 2,500 mm,
            Spindel : max. 6000 Rpm
            Spindelpower 28 Kw
            as extra :high frequency spindle, type HFS IMT Mold, max. 26,000 rpm, max. 11
            kW,
            table dim. (floorplates)8,000 x 2,500 x 300 mm, T-slots 22 H12, distance T-
            slots 250 mm,
            table load max. 15,000 kg/m²,
            distance spindle - column max. 1,675 mm,
            feeds X/Y/Z max. 30,000 mm/min,
            Total power 96 Kw
            machine weight 55,000 kg,
            column 12,000 kg,
            platen 16,000 kg,
            2x CNC screen control, make Heidenhain, type CNC I 530,
            autom. tool changer, chain type, max. 60 tools,
            tool holder SK50, tool weight max. 25 kg, tool L max. 400 mm,
            radio manual control panel,
            make Heidenhain, type HR-550,
            telediagnosis system,
            autom. universal milling head,
            external cooling, max. 5 bar,
            self-cleaning filter, tank, volume 600 l,
            tool outside air cooling,
            tool inside air cooling,
            hinged belt chip conveyor,
            protective housing,
            tool measuring probe M&H 20.41,
            control cabinet, ser. No. 218/14,





        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine SORALUCE Dano Batgro FR-30000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03754 · Travelling column milling machine

          SORALUCE - Dano Batgro FR-30000 - - 2013 - Heidenhain

          Technical details
          x-travel 30000 mm︱y-travel 3600 mm︱z-travel 1900 mm︱Control Heidenhain ︱type TNC 530 i ︱milling head -swivable CNC︱turning speeds 4000 U/min︱conus taper DIN 69871+AD mm︱spindle drive 46 kW︱Feed 10000 mm/min︱Rapid movement 25000 mm/min︱chip conveyor 2 St.︱coolant ︱filter unit ︱Plate area 31000x2500 mm︱total power requirement 85 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.
            x-travel 30000 mm
            y-travel 3600 mm
            z-travel 1900 mm
            Control Heidenhain
            type TNC 530 i
            turning speeds 4000 U/min
            conus taper DIN 69871+AD mm
            spindle drive 46 kW
            Feed 10000 mm/min
            Rapid movement 25000 mm/min
            chip conveyor 2 St.
            Plate area 31000x2500 mm
            total power requirement 85 kW
            Description :
            The tech. Data are manufacturer or operator information and therefore non-
            binding. We reserve the right to prior sale; Our terms and conditions of sale
            apply exclusively.About usMore than 400 of our own machines in the
            warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than
            1000 items Accessories for your workshopYou want to sell machines, production
            lines or your company,then contact us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine SORALUCE Dano Batgro FR-30000


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12953L · Travelling column milling machine

          SORALUCE - Dano Batgro FR-30000 - - 2013 - Heidenhain TNC 530i

          Technical details
          x-travel 30000 mm︱y-travel 3600 mm︱z-travel 1900 mm︱Control Heidenhain TNC 530i ︱turning speed range - milling 4000 U/min︱taper DIN69871+AD ︱spindle drive 46 kW︱feed range - spindle head 10000 mm/min︱rapid traverse 25000 mm/min︱floor plate size: 30000x3000 mm ︱total power requirement 85 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Woeking hours: 9332 Machine number: 5619 Chipconveyor: 2x Angle plates: 4x Box table
            x-travel 30000 mm
            y-travel 3600 mm
            z-travel 1900 mm
            Control Heidenhain TNC 530i
            turning speed range - milling 4000 U/min
            taper DIN69871+AD
            spindle drive 46 kW
            feed range - spindle head 10000 mm/min
            rapid traverse 25000 mm/min
            floor plate size: 30000x3000 mm
            total power requirement 85 kW
            Description :
            Woeking hours: 9332
            Machine number: 5619
            Chipconveyor: 2x
            Angle plates: 4x
            Box table


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine FPT Spirit 130


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1110049 · Travelling column milling machine

          FPT - Spirit 130 - - 2012 - Heidenhain Itnc 530

          Technical details
          x-travel 14.000 mm︱y-travel 1.500 mm︱z-travel 3.000 mm︱Control Heidenhain Itnc 530 ︱total power requirement 50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour
            x-travel 14.000 mm
            y-travel 1.500 mm
            z-travel 3.000 mm
            Control Heidenhain Itnc 530
            total power requirement 50 kW
            Description :
            Stocknumber 1110049
            Type of machine CNC floortype milling machine
            Make FPT
            Type Spirit 130
            Build in 2012
            Type of control HEIDENHAIN TNC Itnc 530
            X-stroke (mm) 14.000
            Y-stroke (mm) 1.500
            Z-stroke (mm) 3.000
            Speeds (Rpm) max. 4.000
            Admission in spindlehead Iso 50
            Rapid feeds max 25.000 mm/min


            Additional information
            Program run 9655 hour



        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine DECKEL MAHO DMF 260 New Design


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9172 · Travelling column milling machine

          DECKEL MAHO - DMF 260 New Design - - 2010 - iTNC 530 Heidenhain

          Technical details
          x-travel 2.600 mm︱y-travel 700 mm︱z-travel 700 mm︱control iTNC 530 Heidenhain︱Main spindle: ︱turning speed range - main spindle 20 - 18.000 min/-1︱power capacity - main spindel 35 / 25 kW︱tool taper SK 40 ︱work table: ︱table surface area 2.900 x 700 mm︱max. table load 2.150 kg︱tool magazin: ︱number of toolpositions 30 pos.︱tool taper SK 40 ︱max. tool diameter 80 mm︱max. tool-dia with free toolbox 130 mm︱max. tool length 300 mm︱max. tool weight 6,0 kg︱feeds: ︱rapid traverse ( X / Y / Z ) 40 m/min︱
          CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!
            x-travel 2.600 mm
            y-travel 700 mm
            z-travel 700 mm
            control iTNC 530 Heidenhain
            turning speed range - main spind. 20 - 18.000 min/-1
            power capacity - main spindel 35 / 25 kW
            tool taper SK 40
            table surface area 2.900 x 700 mm
            max. table load 2.150 kg
            number of toolpositions 30 pos.
            tool taper SK 40
            max. tool diameter 80 mm
            max. tool-dia with free toolbox 130 mm
            max. tool length 300 mm
            max. tool weight 6,0 kg
            rapid traverse ( X / Y / Z ) 40 m/min
            Description :
            CNC - Travel Column Milling Machine
            DECKEL MAHO - DMF 260 New Design

            - NC dividing head (A-axis)
            - Operating hours: 18.709h spindle run

            - overhauld spindle installed (Dec 2023)
            - Z-axis weight compensation changed (Feb 2023)
            - Production package
            - Option: tool clamping for tightening bolts

            - WITHOUT vices!


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine SORALUCE FL 5000


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-668 · Travelling column milling machine

          SORALUCE - FL 5000 - - 2009 -

          Technical details
          x-travel 4.500 mm︱y-travel 1.800 mm︱z-travel 1.200 mm︱Control HEIDENHAIN ITNC - 530 ︱handwheel HEIDENHAIN 520 ︱milling head -swivable +/- 2,5 X 2,5 °︱Internal cooling system 20 bar︱coolant 1.000 L︱tool change unit 40 pos.︱Chip coveyor 2 St. ︱Tool adapter ISO 50 ︱operating hours 45.981 h︱Program on 25.799 h︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 4.500 mm
            y-travel 1.800 mm
            z-travel 1.200 mm
            Control HEIDENHAIN ITNC - 530
            handwheel HEIDENHAIN 520
            milling head -swivable +/- 2,5 X 2,5 °
            Internal cooling system 20 bar
            coolant 1.000 L
            tool change unit 40 pos.
            Chip coveyor 2 St.
            Tool adapter ISO 50
            operating hours 45.981 h
            Program on 25.799 h


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine DMG DMF 250 Linear


          • Glaub Werkzeugmaschinen GmbH
          • Industriestraße 36
          • 74194 Neuenstadt am Kocher
          • Deutschland

          • +49 (0) 7139 9366 744
            +49 (0) 7139 9365 794
          • service@gwg-maschinen.com
            www.gwg-maschinen.com
          #2029-1182 · Travelling column milling machine

          DMG - DMF 250 Linear - - 2009 - Heidenhain iTNC 530

          Technical details
          x-travel 2500 mm︱y-travel 920 mm︱z-travel 820 mm︱Control Heidenhain iTNC 530 ︱weight of the machine ca. 24.500 kg︱dimensions of the machine ca. 6500 x 9300 x 3267 mm︱
          - Table size: 3100 x 900 mm - 30-fold tool changer - Tool holder: SK50 - spindle speed: max. 10.000 rpm - Chip conveyor make DMG - Collision monitoring system make Brankamp - Measuring probe M+H - Partition wall for pendulum machining - incl. 50 tool holders SK50
            x-travel 2500 mm
            y-travel 920 mm
            z-travel 820 mm
            Control Heidenhain iTNC 530
            weight of the machine ca. 24.500 kg
            dimensions of the machine ca. 6500 x 9300 x 3267 mm
            Description :
            - Table size: 3100 x 900 mm
            - 30-fold tool changer
            - Tool holder: SK50
            - spindle speed: max. 10.000 rpm
            - Chip conveyor make DMG
            - Collision monitoring system make Brankamp
            - Measuring probe M+H
            - Partition wall for pendulum machining
            - incl. 50 tool holders SK50


        • Glaub Werkzeugmaschinen GmbH
        • Industriestraße 36
        • 74194 Neuenstadt am Kocher
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Travelling column milling machine SORALUCE FP 6000


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-93 · Travelling column milling machine

          SORALUCE - FP 6000 - - 2009 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 6000 mm︱y-travel 2100 mm︱z-travel 1500 mm︱control HEIDENHAIN iTNC 530 ︱feed 2- 20 m/min︱spindle turning speed range 20 -4000 U/min︱table dimension - longitudinal 7000 mm︱table dimension - cross 2000 mm︱total power requirement 79 kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. 15 x 7 x 4,6 m︱
          The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min
            x-travel 6000 mm
            y-travel 2100 mm
            z-travel 1500 mm
            control HEIDENHAIN iTNC 530
            feed 2- 20 m/min
            spindle turning speed range 20 -4000 U/min
            table dimension - longitudinal 7000 mm
            table dimension - cross 2000 mm
            total power requirement 79 kW
            weight of the machine ca. 55 t
            dimensions of the machine ca. 15 x 7 x 4,6 m
            Description :
            The SORALUCE FP6000 is in very good condition.

            accessories as option:
            # clamping angle: 5'000.-€
            # Clamping cube: 2'000.-€
            # Div. tools & workbench: 2'000.-€

            Description:
            - CNC control: HEIDENHAIN ITNC 530

            Orthogonal milling head:
            - Tool holder: ISO 50, DIN69871 AD
            - Automatic tool clamping: Clamping force 20,000 N
            - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm
            - Tightening bolt: DIN 69872 form A
            - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane,
            270 positions front plane)
            270 positions front plane)
            - Diameter spindle bearing: 90
            - Sealing air: 0,7 bar

            Main drive:
            - Drive type: three-phase motor
            - Drive power: 100 % ED 32 kW

            spindle:
            - Spindle speed: 20 - 4000 rpm
            - Full power from: 340 rpm
            - Torque at 32 kW/S1: 910 Nm
            - Speed control: 2 ranges infinitely variable via star/delta connection

            Rapid traverse: max. 35000 mm/min




        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •