'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Double Column Milling M-C - Gantry Type

          Machinelist: Double Column Milling M/C - Gantry Type


          Double Column Milling M/C - Gantry Type

          used Milling machines Double Column Milling M/C - Gantry Type TRIMILL VF3016


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1620 · Double Column Milling M/C - Gantry Type

          TRIMILL - VF3016 - - 2017 - HEIDENHAIN iTNC530 HSCI

          Technical details
          x-travel 3.000 mm︱y-travel 1.600 mm︱z-travel 1.200 mm︱control HEIDENHAIN iTNC530 HSCI ︱B-axis (swivelling head) +/- 100 °︱C-axis (milling head rotation axis) +/- 240 °︱feed and rapid traverse : ︱rapid feed Y,X,Z 40.000 m/min︱Rapid traverse B- and C-Axis 50 rpm︱Accelerations (X, Y and Z) 4 m/s²︱Machine table: : ︱Clamping surface 3.500 x 1.750 mm︱T-slots 27 x 22 mm H12 ︱T-slot - distance 125 mm︱max. workpiece load 7.000 kg/m2︱Max. distance table to spindle nose 1.356 mm︱2-Axis Fork Milling Head T21C ︱turning speed range: 10- 24.000 min-1︱Drive power (S1/S6): 42/50 KW︱Torque (S1/S6): 67/84 Nm︱
          Equipment / Accessories • 5-axis vertical portal milling machine in Gantry design. • Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63 • Manually operated textile roof • Tool changer chain 50-fold, change orientation vertical • 3D probe for workpiece measurement • Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process. Alarm triggering, feed rate reduction or machine stop are carried out via the control system • HEIDENHAIN HR550 handwheel (wireless) • BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used • Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS) • TRIMILL Kinematics - application for rotary axes • TRIMILL Teleservice - remote support • Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm • Hydraulic power unit • 1 lubrication unit for the machine • 1 lubrication unit for the milling spindle • 1 cooling unit for cooling the milling head • 1 cooling unit for cooling the axis motors • 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m³. Extraction capacity 2.000 m³/h • 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm program hours on the machine: approx. 8.000h
            x-travel 3.000 mm
            y-travel 1.600 mm
            z-travel 1.200 mm
            control HEIDENHAIN iTNC530 HSCI
            B-axis (swivelling head) +/- 100 °
            C-axis (milling head rotation ax. +/- 240 °
            feed and rapid traverse :
            rapid feed Y,X,Z 40.000 m/min
            Rapid traverse B- and C-Axis 50 rpm
            Accelerations (X, Y and Z) 4 m/s²
            Machine table: :
            Clamping surface 3.500 x 1.750 mm
            T-slots 27 x 22 mm H12
            T-slot - distance 125 mm
            max. workpiece load 7.000 kg/m2
            Max. distance table to spindle n. 1.356 mm
            turning speed range: 10- 24.000 min-1
            Drive power (S1/S6): 42/50 KW
            Torque (S1/S6): 67/84 Nm
            Description :
            Equipment / Accessories
            • 5-axis vertical portal milling machine in Gantry design.
            • Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63
            • Manually operated textile roof
            • Tool changer chain 50-fold, change orientation vertical
            • 3D probe for workpiece measurement
            • Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process.
            Alarm triggering, feed rate reduction or machine stop are carried out via the control system
            • HEIDENHAIN HR550 handwheel (wireless)
            • BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used
            • Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS)
            • TRIMILL Kinematics - application for rotary axes
            • TRIMILL Teleservice - remote support
            • Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm
            • Hydraulic power unit
            • 1 lubrication unit for the machine
            • 1 lubrication unit for the milling spindle
            • 1 cooling unit for cooling the milling head
            • 1 cooling unit for cooling the axis motors
            • 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m³. Extraction capacity 2.000 m³/h
            • 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm

            program hours on the machine: approx. 8.000h



        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Double Column Milling M/C - Gantry Type FOREST-LINE MODULILL 300G


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-0002 · Double Column Milling M/C - Gantry Type

          FOREST-LINE - MODULILL 300G - - 1999/2021 - SINUMERIK 840D

          Technical details
          x-travel 11.450 mm︱y-travel 3.500 mm︱z-travel 1.250 mm︱Control SINUMERIK 840D ︱total power requirement 130 kVA︱weight of the machine ca. 112 t︱dimensions of the machine ca. 22,6 x 8,0 x 6,3 m︱
          Double Column Milling M/C - Gantry Type Brand: FOREST-LINE ALBERT / Type: MODUMILL 300G / Year of construction: 1999 Extensive modernizations in 2008 and 2021. Machine with interchangeable vertical and horizontal milling heads with automatic indexing. The machine can be inspected by appointment under working condition. Very well-kept, continuously maintained condition! TECHNICAL DATA: - CNC Control: SINUMERIK 840D - Travels X/Y/Z: 11.450 / 3.500 / 1.250 mm Cross-section of the Z-axis slider: 360 x 360 mm - Gantry passage: 3.000 - Height below vertical spindle: 1.400 mm - Working clamping width: 2.500 mm - Fixed table dimensions: 5.000 x 2.500 mm - Longitudinal pallet system EQUIPMENT: - Tool changer (chain magazine): 80-positions - Cooling through the spindle centre - 2 chip conveyors - Gantry panelling - Touch probe, Brand: RENISHAW - Electronic hand wheel - Remote diagnosis - Tool management and wear management - CE marking Electrical connection values: - Total power requirement: 130 kVA - External dimensions of the machine: 22,6 x 8,0 x 6,3 m There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.
            x-travel 11.450 mm
            y-travel 3.500 mm
            z-travel 1.250 mm
            Control SINUMERIK 840D
            total power requirement 130 kVA
            weight of the machine ca. 112 t
            dimensions of the machine ca. 22,6 x 8,0 x 6,3 m
            Description :
            Double Column Milling M/C - Gantry Type
            Brand: FOREST-LINE ALBERT / Type: MODUMILL 300G / Year of construction: 1999

            Extensive modernizations in 2008 and 2021.

            Machine with interchangeable vertical and horizontal milling heads with
            automatic indexing.

            The machine can be inspected by appointment under working condition.

            Very well-kept, continuously maintained condition!


            TECHNICAL DATA:
            - CNC Control: SINUMERIK 840D
            - Travels X/Y/Z: 11.450 / 3.500 / 1.250 mm
            Cross-section of the Z-axis slider: 360 x 360 mm
            - Gantry passage: 3.000
            - Height below vertical spindle: 1.400 mm
            - Working clamping width: 2.500 mm

            - Fixed table dimensions: 5.000 x 2.500 mm
            - Longitudinal pallet system

            EQUIPMENT:
            - Tool changer (chain magazine): 80-positions
            - Cooling through the spindle centre
            - 2 chip conveyors
            - Gantry panelling
            - Touch probe, Brand: RENISHAW
            - Electronic hand wheel
            - Remote diagnosis
            - Tool management and wear management
            - CE marking

            Electrical connection values:
            - Total power requirement: 130 kVA
            - External dimensions of the machine: 22,6 x 8,0 x 6,3 m

            There is no guarantee for correctness and completeness of the technical details
            and accessoires. - Subject to prior sale -

            Detailed technical data sheet and information on equipment available on request.


        • Isabelle Knops
        • Opladener Str. 126
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Double Column Milling M/C - Gantry Type FOREST LINE Seramill 240


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20190 · Double Column Milling M/C - Gantry Type

          FOREST LINE - Seramill 240 - - 1992 - NUM 1060

          Technical details
          x-travel 6000 mm︱y-travel 2500 mm︱z-travel 950 mm︱distance between columns 2400 mm︱Height of spindle 1200 mm︱bed width 2115 mm︱bed length 6000 mm︱table load 4 t/m2︱rapid travel x/y/z 10000 mm/min︱feeds infinitely variable 1-3000 mm/min︱Rated capacity of drive motor 20 kW︱Cross cut of slide 320x340 mm︱Positioning increment 2.5 °︱Turning speeds stepless 10-3200 U/min︱Tool tapers ISO 50 ︱tool piece magazine with 20 ︱Control NUM 1060 ︱total power requirement 60 kVA︱dimensions of the machine ca. - m︱weight of the machine ca. - t︱
          equipped with: - CNC - Control NUM 1060 - ATC with 20 tools(ISO 50) - 2-Axis Milling Head 2,5° x 2,5° - Covering - Cooling through Spindle 15bar - Chip Conveyor
            x-travel 6000 mm
            y-travel 2500 mm
            z-travel 950 mm
            distance between columns 2400 mm
            Height of spindle 1200 mm
            bed width 2115 mm
            bed length 6000 mm
            table load 4 t/m2
            rapid travel x/y/z 10000 mm/min
            feeds infinitely variable 1-3000 mm/min
            Rated capacity of drive motor 20 kW
            Cross cut of slide 320x340 mm
            Positioning increment 2.5 °
            Turning speeds stepless 10-3200 U/min
            Tool tapers ISO 50
            tool piece magazine with 20
            Control NUM 1060
            total power requirement 60 kVA
            dimensions of the machine ca. - m
            weight of the machine ca. - t
            Description :
            equipped with:
            - CNC - Control NUM 1060
            - ATC with 20 tools(ISO 50)
            - 2-Axis Milling Head 2,5° x 2,5°
            - Covering
            - Cooling through Spindle 15bar
            - Chip Conveyor


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Double Column Milling M/C - Gantry Type INGERSOLL


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09556 · Double Column Milling M/C - Gantry Type

          INGERSOLL - - - 1975/1995 - SIEMENS 840C

          Technical details
          x-travel 16500 mm︱y-travel 6000 mm︱z-travel 600 mm︱w-axis 2915 mm︱surface area 16460 x 4875 mm︱table load 200 t︱distance between columns 5590 mm︱distance table - lower edge spindle 45 - 3580 mm︱spindle diameter 152 mm︱spindle motor 30 kW︱spindle taper ISO 50 ︱spindle turning speed range 25 - 600 U/min︱feed in x - axis 6,3 m/min︱feed in y - axis 3 m/min︱control SIEMENS 840C ︱total power requirement kW︱weight of the machine ca. 300 t︱dimensions of the machine ca. 30 x 10 x 9 m︱
          - 1995 retrofitted with CNC control SIEMENS 840 C - universal milling heads - 2 milling heads on crossrail with ram-section 420 x 420 mm - crossrail movement by ac motor and with hydr. clamping - measuring system for x- and y-axis via rack/shaft - column movement by double rack/pinion - floor plate
            x-travel 16500 mm
            y-travel 6000 mm
            z-travel 600 mm
            w-axis 2915 mm
            surface area 16460 x 4875 mm
            table load 200 t
            distance between columns 5590 mm
            distance table - lower edge spin. 45 - 3580 mm
            spindle diameter 152 mm
            spindle motor 30 kW
            spindle taper ISO 50
            spindle turning speed range 25 - 600 U/min
            feed in x - axis 6,3 m/min
            feed in y - axis 3 m/min
            control SIEMENS 840C
            weight of the machine ca. 300 t
            dimensions of the machine ca. 30 x 10 x 9 m
            Description :
            - 1995 retrofitted with CNC control SIEMENS 840 C
            - universal milling heads
            - 2 milling heads on crossrail with ram-section 420 x 420 mm
            - crossrail movement by ac motor and with hydr. clamping
            - measuring system for x- and y-axis via rack/shaft
            - column movement by double rack/pinion
            - floor plate




        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact

          Milling Machine - Vertical

          used Milling machines Milling Machine - Vertical Cinch Mill L50


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5567 · Milling Machine - Vertical

          Cinch Mill - L50 - - 2017 -

          Technical details
          x-travel 2000 mm︱y-travel 850 mm︱z-travel 710 mm︱total power requirement kW︱weight of the machine ca. 6800 kg︱dimensions of the machine ca. m︱
            x-travel 2000 mm
            y-travel 850 mm
            z-travel 710 mm
            weight of the machine ca. 6800 kg


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical IMES-ICORE GFY 98/108 SW


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7031 · Milling Machine - Vertical

          IMES-ICORE - GFY 98/108 SW - - 2008 -

          Technical details
          x-travel 980 mm︱y-travel 1080 mm︱z-travel 280 mm︱Control ︱table-size 1.125 x 1.700 mm︱table height 800 mm︱diameter 435 mm︱spindle pitch 16 x 5 mm︱total power requirement kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 2,08 x 1,98 x 2,0 m︱
          Accessories: - Tool changing station - TS20 probe - Clamping system
            x-travel 980 mm
            y-travel 1080 mm
            z-travel 280 mm
            table-size 1.125 x 1.700 mm
            table height 800 mm
            diameter 435 mm
            spindle pitch 16 x 5 mm
            weight of the machine ca. 0,8 t
            dimensions of the machine ca. 2,08 x 1,98 x 2,0 m
            Description :
            Accessories:
            - Tool changing station
            - TS20 probe
            - Clamping system


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical HURCO VMX 30


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1657 · Milling Machine - Vertical

          HURCO - VMX 30 - - 2005 -

          Technical details
          travel -x axis 760 mm︱travel -y axis 510 mm︱travel -z axis 610 mm︱control for program Ultimax 4 ︱turning speeds 10.000 U/min︱numbers of positions in the tool changer 24 ︱tool taper SK40 ︱table-size 1.020 x 510 mm︱
          Milling Machine - Vertical | HUROC - VMX 30 equipped with ITC. The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMX30 | VMX-30
            travel -x axis 760 mm
            travel -y axis 510 mm
            travel -z axis 610 mm
            control for program Ultimax 4
            turning speeds 10.000 U/min
            numbers of positions in the tool. 24
            tool taper SK40
            table-size 1.020 x 510 mm
            Description :
            Milling Machine - Vertical | HUROC - VMX 30 equipped with ITC.


            The machine is in very good condition.

            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VMX30 | VMX-30


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical FEHLMANN Picomax 90-M


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1633 · Milling Machine - Vertical

          FEHLMANN - Picomax 90-M - - 2004 - Heidenhain - iTNC 530

          Technical details
          travel -x axis 705 mm︱travel -y axis 425 mm︱travel -z axis 610 mm︱control Heidenhain - iTNC 530 ︱turning speed range 50 - 20.000 U/min︱numbers of positions in the tool changer 32 ︱tool taper SK30
          Universal Milling Machine | FEHLMANN - Picomax 90-M Scope of delivery: - extensive package of tools - dividing head (4th axis) The machine is in a well-maintained condition. Please refer to the offer for further technical details. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PICOMAX90M | PICOMAX90 M | PICOMAX-90 M
            travel -x axis 705 mm
            travel -y axis 425 mm
            travel -z axis 610 mm
            control Heidenhain - iTNC 530
            turning speed range 50 - 20.000 U/min
            numbers of positions in the tool. 32
            tool taper SK30
            Description :
            Universal Milling Machine | FEHLMANN - Picomax 90-M


            Scope of delivery:

            - extensive package of tools
            - dividing head (4th axis)


            The machine is in a well-maintained condition.

            Please refer to the offer for further technical details.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: PICOMAX90M | PICOMAX90 M | PICOMAX-90 M


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical IBARMIA ZV-58 / L6000


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1448 · Milling Machine - Vertical

          IBARMIA - ZV-58 / L6000 - - 2004 - Heidenhain - iTNC530

          Technical details
          travel -x axis 6.000 mm︱travel -y axis 1.000 mm︱travel -z axis 800 mm︱control Heidenhain - iTNC530 ︱distance vertical spindle / table 1.000 mm︱table-size 3.300 x 1.050 mm︱number of T-slots 7 ︱T-slot - width 125
          Travelling column milling machine | IBARMIA - ZV-58 / L6000 Further information / scope of delivery: - Clamping system mounted on the table (see pictures) - Normal T-slot table installed under clamping system - Renishaw probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000
            travel -x axis 6.000 mm
            travel -y axis 1.000 mm
            travel -z axis 800 mm
            control Heidenhain - iTNC530
            distance vertical spindle / tabl. 1.000 mm
            table-size 3.300 x 1.050 mm
            number of T-slots 7
            T-slot - width 125
            Description :
            Travelling column milling machine | IBARMIA - ZV-58 / L6000


            Further information / scope of delivery:

            - Clamping system mounted on the table (see pictures)
            - Normal T-slot table installed under clamping system
            - Renishaw probe


            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical FEHLMANN PICOMAX 80 CNC


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024027 · Milling Machine - Vertical

          FEHLMANN - PICOMAX 80 CNC - - 2003 - Heidenhain TNC 426

          Technical details
          x-travel 700 mm︱y-travel 315 mm︱z-travel 495 mm︱table surface area 1.230 x 410 mm︱quill travel 180 mm︱control Heidenhain TNC 426 ︱tool changer: ︱number of tool places 32 Pos.︱tool taper SK 30 ︱total power requirement 20 kW︱weight of the machine ca. 3,4 t︱
          In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - incl. 4th axis - Operating hours: 73,730 h - Spindle hours: 16,362 h Accesories: - Renishaw measuring probe ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 700 mm
            y-travel 315 mm
            z-travel 495 mm
            table surface area 1.230 x 410 mm
            quill travel 180 mm
            control Heidenhain TNC 426
            number of tool places 32 Pos.
            tool taper SK 30
            total power requirement 20 kW
            weight of the machine ca. 3,4 t
            Description :
            In our opinion, the machine is in very good condition and can be viewed under
            power by appointment.

            Technical features:
            - incl. 4th axis
            - Operating hours: 73,730 h
            - Spindle hours: 16,362 h

            Accesories:
            - Renishaw measuring probe

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***




        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical FEHLMANN PICOMAC 80 CNC


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024028 · Milling Machine - Vertical

          FEHLMANN - PICOMAC 80 CNC - - 2000 - Heidenhain TNC 426

          Technical details
          x-travel 700 mm︱y-travel 315 mm︱z-travel 495 mm︱table surface area 1.230 x 410 mm︱quill travel 180 mm︱control Heidenhain TNC 426 ︱tool taper SK 30 ︱total power requirement 20 kW︱weight of the machine ca. 3,2 t︱
          In our opinion, the machine is in very good condition and can be viewed under power by appointment. Technical features: - incl. 4th axis - Operating hours: 66,200 h - Spindle hours: 21,900 h Accesories: - Renishaw measuring probe ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 700 mm
            y-travel 315 mm
            z-travel 495 mm
            table surface area 1.230 x 410 mm
            quill travel 180 mm
            control Heidenhain TNC 426
            tool taper SK 30
            total power requirement 20 kW
            weight of the machine ca. 3,2 t
            Description :
            In our opinion, the machine is in very good condition and can be viewed under
            power by appointment.

            Technical features:
            - incl. 4th axis
            - Operating hours: 66,200 h
            - Spindle hours: 21,900 h

            Accesories:
            - Renishaw measuring probe

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***




        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical BURKHARDT & WEBER HYOP 120 NCW


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-2630 · Milling Machine - Vertical

          BURKHARDT & WEBER - HYOP 120 NCW - - 2000 - Heidenhain TNC 426 / 430

          Technical details
          spindle diameter - mm︱x-travel 1250 mm︱y-travel 630 mm︱Control Heidenhain TNC 426 / 430 ︱total power requirement 48 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. ca. 5 x 6 x 4 m m︱
          CNC Vertical Machining Center retrofitted in 2000 Spindle ISO 50, Speedrange 30-3000 min-1max. Torque 522 NmFeed Rate 3-2000 mm, Rapid Feed 10 m/minDistance Spindle - Table Surface 725 mmDistance Spindle - Column 800 mm.Measurements ca. 5 x 5 m, Weight ca. 12 toDie Maschine was retrofitted in 2000 with Siemens AC-Drives and Heidenhain Control Fixed Table 1200 x 710, Add. Table 200 mm,36-station Tool Changer, Cooling.Heidenhain Probe TS 630- the magnetic clamping table shown is not included! - Workspace: 1250 x 630 x 560 Drive: 44 Control: Heidenhain TNC 426 PB
            spindle diameter - mm
            x-travel 1250 mm
            y-travel 630 mm
            Control Heidenhain TNC 426 / 430
            total power requirement 48 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. ca. 5 x 6 x 4 m m
            Description :
            CNC Vertical Machining Center
            retrofitted in 2000
            Spindle ISO 50, Speedrange 30-3000 min-1max. Torque 522 NmFeed Rate 3-2000 mm, Rapid Feed 10 m/minDistance Spindle - Table Surface 725 mmDistance Spindle - Column 800 mm.Measurements ca. 5 x 5 m, Weight ca. 12 toDie Maschine was retrofitted in 2000 with Siemens AC-Drives and Heidenhain Control
            Fixed Table 1200 x 710, Add. Table 200 mm,36-station Tool Changer, Cooling.Heidenhain Probe TS 630- the magnetic clamping table shown is not included! -
            Workspace: 1250 x 630 x 560
            Drive: 44
            Control: Heidenhain TNC 426 PB


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical KONDIA B 500


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024035 · Milling Machine - Vertical

          KONDIA - B 500 - - 1998 - Heidenhain TNC 415

          Technical details
          x-travel 600 mm︱y-travel 400 mm︱z-travel 380 mm︱Control Heidenhain TNC 415 ︱table surface area 700 x 350 mm︱tool taper SK 40 ︱number of tool places 16 Pos.︱total power requirement 13 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 2,7 x 2 x 2,4 m︱
            x-travel 600 mm
            y-travel 400 mm
            z-travel 380 mm
            Control Heidenhain TNC 415
            table surface area 700 x 350 mm
            tool taper SK 40
            number of tool places 16 Pos.
            total power requirement 13 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 2,7 x 2 x 2,4 m


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical MAS MCV 750


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5658 · Milling Machine - Vertical

          MAS - MCV 750 - - 1998 - Heidenhain

          Technical details
          x-travel 750 mm︱y-travel 500 mm︱z-travel 500 mm︱control Heidenhain ︱total power requirement kW︱weight of the machine ca. 4000 kg︱dimensions of the machine ca. m︱
            x-travel 750 mm
            y-travel 500 mm
            z-travel 500 mm
            control Heidenhain
            weight of the machine ca. 4000 kg


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical HERMLE UWF 900


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-10069 · Milling Machine - Vertical

          HERMLE - UWF 900 - - 1996 - Heidenhain Tnc

          Technical details
          x-travel 600 mm︱y-travel 400 mm︱z-travel 420 mm︱Control Heidenhain Tnc ︱table-size 900 x 460 mm︱turning speeds 4000 U/min︱total power requirement kW︱weight of the machine ca. 2,9 t︱dimensions of the machine ca. 3 x 2 x 2 m︱
            x-travel 600 mm
            y-travel 400 mm
            z-travel 420 mm
            Control Heidenhain Tnc
            table-size 900 x 460 mm
            turning speeds 4000 U/min
            weight of the machine ca. 2,9 t
            dimensions of the machine ca. 3 x 2 x 2 m


        • AS Maschinenhandel
        • Welserstr. 10e
        • 51149 Köln
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical KONDIA K 600 CNC


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-002868 · Milling Machine - Vertical

          KONDIA - K 600 CNC - - 1995 - TNC 407

          Technical details
          x-travel 600 mm︱y-travel 350 mm︱z-travel 140 mm︱table surface area 700 x 300 mm︱spindle taper ISO 40 ︱spindle turning speed range 100 - 4000 U/min︱distance spindle center to column 395 mm︱distance spindle nose and table min. 170 -max. 550 mm︱control TNC 407 ︱milling feeds 3 + 2000 mm/min︱rapid traverse 5000 mm/min︱spindle drive 5,5 kW︱total power requirement 9 kW︱weight of the machine ca. 1,9 t︱dimensions of the machine ca. 2,5 x 1,8 x 2,2 m︱
          • control HEIDENHAIN TNC 407,
            x-travel 600 mm
            y-travel 350 mm
            z-travel 140 mm
            table surface area 700 x 300 mm
            spindle taper ISO 40
            spindle turning speed range 100 - 4000 U/min
            distance spindle center to colum. 395 mm
            distance spindle nose and table min. 170 -max. 550 mm
            control TNC 407
            milling feeds 3 + 2000 mm/min
            rapid traverse 5000 mm/min
            spindle drive 5,5 kW
            total power requirement 9 kW
            weight of the machine ca. 1,9 t
            dimensions of the machine ca. 2,5 x 1,8 x 2,2 m
            Description :
            • control HEIDENHAIN TNC 407,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical BOHNER & KOEHLE (BOKOE) WF2/10


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06002 · Milling Machine - Vertical

          BOHNER & KOEHLE (BOKOE) - WF2/10 - - 1990 - FIDIA

          Technical details
          x-travel 1500 mm︱y-travel 1000 mm︱z-travel 700 mm︱table: 1500 x 1000 mm︱control FIDIA ︱weight of the machine ca. 11 t︱
          ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            x-travel 1500 mm
            y-travel 1000 mm
            z-travel 700 mm
            table: 1500 x 1000 mm
            control FIDIA
            weight of the machine ca. 11 t
            Description :

            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Please note:
            The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.
            Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.
            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical HOLKE F 8 V


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05979 · Milling Machine - Vertical

          HOLKE - F 8 V - - 1988 -

          Technical details
          Year ca, 1988 ︱tool taper MK 3 ︱weight of the machine ca. 2,5 t︱digital ︱cross-moving table ︱feed:
          ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Year ca, 1988
            tool taper MK 3
            weight of the machine ca. 2,5 t
            Description :

            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Please note:
            The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.
            Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.
            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical Lagun FBF1600


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F493 · Milling Machine - Vertical

          Lagun - FBF1600 - - 1987 -

          Technical details
          CNC brand Heidenhain ︱Table length 1600 mm︱Table width 680 mm︱X 1450 mm︱Y 850 mm︱Z 750 mm︱Spindle taper ISO 50 ︱Speed 40 - 1800 RPM︱Machine dimensions (lxwxh) 3910 x 3050 x 2650 mm︱Machine weight 7500 kg︱
            CNC brand Heidenhain
            Table length 1600 mm
            Table width 680 mm
            X 1450 mm
            Y 850 mm
            Z 750 mm
            Spindle taper ISO 50
            Speed 40 - 1800 RPM
            Machine dimensions (lxwxh) 3910 x 3050 x 2650 mm
            Machine weight 7500 kg
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical DROOP & REIN FSN 1406 DA30 KCN


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03787 · Milling Machine - Vertical

          DROOP & REIN - FSN 1406 DA30 KCN - - 1986 - Fidia C1

          Technical details
          x-travel 2400 mm︱y-travel 2000 mm︱z-travel 1450 mm︱table surface area 5000 x 1400 mm︱spindle taper SK 50 ︱Control Fidia C1︱throat 1500 mm︱
          with digital readout ball screw extensive toolings and accessories!
            x-travel 2400 mm
            y-travel 2000 mm
            z-travel 1450 mm
            table surface area 5000 x 1400 mm
            spindle taper SK 50
            Control Fidia C1
            throat 1500 mm
            Description :
            with digital readout
            ball screw

            extensive toolings and accessories!


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical HERMLE UWF 721 TNC 155


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-30007 · Milling Machine - Vertical

          HERMLE - UWF 721 TNC 155 - - 1986 - TNC 155

          Technical details
          x-travel 500 mm︱y-travel 360 mm︱z-travel 400 mm︱turning speeds 20 - 4000 U/min︱control TNC 155 ︱spindle taper ISO 40 ︱feed 2 m/min︱rapid traverse 5 m/min︱table surface area 800 x 390 mm︱central lubrication JA ︱coolant tank 100 l︱T-slots 14 H7 ︱measurment accuracy 0,001 mm︱total power requirement 11 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2,9 x 2,5 x 1,9 m︱
            x-travel 500 mm
            y-travel 360 mm
            z-travel 400 mm
            turning speeds 20 - 4000 U/min
            control TNC 155
            spindle taper ISO 40
            feed 2 m/min
            rapid traverse 5 m/min
            table surface area 800 x 390 mm
            central lubrication JA
            coolant tank 100 l
            T-slots 14 H7
            measurment accuracy 0,001 mm
            total power requirement 11 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2,9 x 2,5 x 1,9 m


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical MAHO MH 2000


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-111 · Milling Machine - Vertical

          MAHO - MH 2000 - - 1986 - PHILIPS 432

          Technical details
          x-travel 1600 mm︱y-travel 1000 mm︱z-travel 650 mm︱quill stroke 125 mm︱spindle turning speed range 40 - 2000 U/min︱tool taper SK-40 ︱table surface area 1000 x 650 mm︱table load 4 t︱rapid traverse 6 m/min︱feed 1 - 3000 mm/min︱Control PHILIPS 432 ︱total power requirement kW︱weight of the machine ca. 11,5 t︱dimensions of the machine ca. 6,2 x 4,8 x 2,9 m︱
          The MAHO is 100% functional and can be viewed under power by arrangement. can be inspected Description: Number of axles: 5 Axle designation: X, Y, Z, B, A Speed range: 0, 40, 50, 100, 125, 160, 200, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000rpm Feed range: 0-4000 Rapid traverse: 6000 Special features: Horizontal-vertical spindle Rotary table can be set up (can be set up at different places on the table) Only fixed rotation ranges can be set
            x-travel 1600 mm
            y-travel 1000 mm
            z-travel 650 mm
            quill stroke 125 mm
            spindle turning speed range 40 - 2000 U/min
            tool taper SK-40
            table surface area 1000 x 650 mm
            table load 4 t
            rapid traverse 6 m/min
            feed 1 - 3000 mm/min
            Control PHILIPS 432
            weight of the machine ca. 11,5 t
            dimensions of the machine ca. 6,2 x 4,8 x 2,9 m
            Description :
            The MAHO is 100% functional and can be viewed under power by arrangement.
            can be inspected
            Description:
            Number of axles: 5
            Axle designation: X, Y, Z, B, A
            Speed range: 0, 40, 50, 100, 125, 160, 200, 315, 400, 500,
            630, 800, 1000, 1250, 1600, 2000rpm
            Feed range: 0-4000
            Rapid traverse: 6000
            Special features: Horizontal-vertical spindle

            Rotary table can be set up (can be set up at different places on the table)

            Only fixed rotation ranges can be set


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical DROOP & REIN FSM 1255 DA 30 KCN


          • HWM Werkzeugmaschinen GmbH
          • wankelstraße 27
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0)15772177266
          • info@hwm-maschinen.de
            www.hwm-maschinen.de
          #2027-18003 · Milling Machine - Vertical

          DROOP & REIN - FSM 1255 DA 30 KCN - - 1985/2007 - Heidenhain TNC 530

          Technical details
          x-travel 2400 mm︱y-travel 1250 mm︱z-travel 1000 mm︱Control Heidenhain TNC 530︱distance spindle - column 1350 mm︱feed range 5-3000 mm/min︱rapid speed 6000 m/min︱Table dimensions 3000 x 1250 mm︱table load 10 t︱spindle diameter 130 mm︱spindle cone ISO ISO 50︱spindle stroke 0-200 mm︱spindle speed: 20-3150 U/min︱spindle adjustment 30 kW︱head swivability +/- 45 °︱total power requirement 55 kW︱weight of the machine ca. 45 t︱required space 8.5 x 5.5 x 4.5 m︱
          machine has overhauled on 2007 cooling tank Fixatures Full Documentation
            x-travel 2400 mm
            y-travel 1250 mm
            z-travel 1000 mm
            Control Heidenhain TNC 530
            distance spindle - column 1350 mm
            feed range 5-3000 mm/min
            rapid speed 6000 m/min
            Table dimensions 3000 x 1250 mm
            table load 10 t
            spindle diameter 130 mm
            spindle cone ISO ISO 50
            spindle stroke 0-200 mm
            spindle speed: 20-3150 U/min
            spindle adjustment 30 kW
            head swivability +/- 45 °
            total power requirement 55 kW
            weight of the machine ca. 45 t
            required space 8.5 x 5.5 x 4.5 m
            Description :
            machine has overhauled on 2007
            cooling tank
            Fixatures
            Full Documentation


        • HWM Werkzeugmaschinen GmbH
        • wankelstraße 27
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines Milling Machine - Vertical Matsuura MC-710V-F Ram-Master 1


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-F642 · Milling Machine - Vertical

          Matsuura - MC-710V-F Ram-Master 1 - - 1981 -

          Technical details
          CNC brand Fanuc ︱Table length 1.100 mm︱Table width 360 mm︱X 710 mm︱Y 350 mm︱Z 473 mm︱Spindle taper ISO 40 ︱Machine dimensions (lxwxh) 3.000 x 2.200 x 2.700 mm︱Machine weight 4.400 kg︱
          Brand Matsuura Machine no F642 Type MC-710V-F Ram-Master 1 CNC Brand Fanuc CNC Type Systeem 6M Year of make 1981 Table length 1.100 mm Table width 360 mm X 710 mm Y 350 mm Z 473 mm Spindle taper ISO40 mm Tool changer 25 Max. workpiece weight 300 kg Manual available Machine size (lxwxh) 3.000 x 2.200 x 2.700 mm Machine weight 4.400 kg
            CNC brand Fanuc
            Table length 1.100 mm
            Table width 360 mm
            X 710 mm
            Y 350 mm
            Z 473 mm
            Spindle taper ISO 40
            Machine dimensions (lxwxh) 3.000 x 2.200 x 2.700 mm
            Machine weight 4.400 kg
            Description :
            Brand Matsuura
            Machine no F642
            Type MC-710V-F Ram-Master 1
            CNC Brand Fanuc
            CNC Type Systeem 6M
            Year of make 1981
            Table length 1.100 mm
            Table width 360 mm
            X 710 mm
            Y 350 mm
            Z 473 mm
            Spindle taper ISO40 mm
            Tool changer 25
            Max. workpiece weight 300 kg
            Manual available
            Machine size (lxwxh) 3.000 x 2.200 x 2.700 mm
            Machine weight 4.400 kg



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •