'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Gear cutting machines

          Machinelist: Gear cutting machines


          Autom. Rack Milling Machine

          used Gear cutting machines Autom. Rack Milling Machine KNAPP-DONAU UZFM 300 H


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23252 · Autom. Rack Milling Machine

          KNAPP-DONAU - UZFM 300 H - - 1964 -

          Technical details
          hobbing length 1750 mm︱milling width 260 mm︱max. module 10 ︱table size incl. water gutter 460 x 2100 mm︱table clamping surface: 250 x 1850 mm︱cutter width - max. 100 mm︱feed of the milling slide, stepless 0 - 500 mm/min.︱rapid traverse feeds 3000 mm/min︱milling head -swivable +/- 30 °︱Rotation speed range of milling head, in 9 steps 29 - 178 rpm︱Milling head swivable 2 sides helical gearcutting 30 °︱total power requirement 4 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 4 x 1,85 x 1,85 m︱
          Accessories: Change gears Milling arbors Operating instructions
            hobbing length 1750 mm
            milling width 260 mm
            max. module 10
            table size incl. water gutter 460 x 2100 mm
            table clamping surface: 250 x 1850 mm
            cutter width - max. 100 mm
            feed of the milling slide, stepl. 0 - 500 mm/min.
            rapid traverse feeds 3000 mm/min
            milling head -swivable +/- 30 °
            Rotation speed range of milling . 29 - 178 rpm
            Milling head swivable 2 sides he. 30 °
            total power requirement 4 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 4 x 1,85 x 1,85 m
            Description :
            Accessories:
            Change gears
            Milling arbors
            Operating instructions


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Bevel Gear Generator - Spiral

          used Gear cutting machines Bevel Gear Generator - Spiral HURTH-MODUL KF 250 B


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24006 · Bevel Gear Generator - Spiral

          HURTH-MODUL - KF 250 B - - 1998 - Siemens Sinumerik 840 C

          Technical details
          workpiece diameter with ratio 1:10 300 mm︱workpiece diameter with ratio 1:1 212 mm︱max. number of teeth 200 ︱min. number of teeth 6 ︱x-travel 300 mm︱X - Axis speed 0,1-5.000 mm/sec.︱y-travel 400 mm︱Y - Axis speed 0,1-5.000 mm/sec.︱A - axis -170 / +170 °︱control Siemens Sinumerik 840 C ︱total power requirement 38 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 4,20 x 2,20 x 2,10 m︱
          incl. suction
            workpiece diameter with ratio 1:. 300 mm
            workpiece diameter with ratio 1:. 212 mm
            max. number of teeth 200
            min. number of teeth 6
            x-travel 300 mm
            X - Axis speed 0,1-5.000 mm/sec.
            y-travel 400 mm
            Y - Axis speed 0,1-5.000 mm/sec.
            A - axis -170 / +170 °
            control Siemens Sinumerik 840 C
            total power requirement 38 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 4,20 x 2,20 x 2,10 m
            Description :
            incl. suction



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Spiral KLINGELNBERG KNC 25 P


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-16040 · Bevel Gear Generator - Spiral

          KLINGELNBERG - KNC 25 P - - 1997 -

          Technical details
          max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1,5 ︱total power requirement 62 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7x4,4x2,45 m︱
          max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min
            max. wheel diameter 275 mm
            gear width 150 mm
            max. module 6
            min. module 1,5
            total power requirement 62 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7x4,4x2,45 m
            Description :
            max. wheel diameter mm
            gear width mm
            max. module 6
            min. module 1.5
            max. workpiece diameter 275 mm
            tooth width max. 5.5 mm
            spiral angle 0 - 60 °
            number of teeth 5 - 120
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            milling drive motor 20 kW
            workpiece drive 14.5 kW
            total power requirement 62 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7 x 4,387 x 2,45 m



            Tool spindle (D-axis)
            - workpiece spindle speed (infinitely) 60 to 350 [...]

            Tool positioning axis (E-axis)
            - swivel range 0 to 360°
            - swivel speed max. 19.5°/s

            Workpiece spindle (B-axis)
            - mounting diameter outer cone (1: 4) 140 mm
            - standard internal cone (1:20) 99.218 mm
            - workpiece spindle speed max. 300 [...]
            - workpiece spindle passage 90 mm

            Workpiece positioning axis (Y-axis)
            - travel 870 mm
            - speed max. 4.5 m/min

            Roller rotation axis (A-axis)
            - swivel range 315°
            - swivel speed max. 40°/s

            Axis intersection (Z-axis)
            - travel range max. +/- 50 mm
            - speed max. 0.657 m/min

            Workpiece swivel axis (C-axis)
            - swivel range -8.5 to 98°
            - swivel speed max. 21.5 °/s

            Milling depth axis (X-axis)
            - travel from -25 to 640 mm
            - max. speed 6 m/min

            Machinen distance (V-axis)
            - travel 150 mm
            - speed max. 1.6 m/min




        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Bevel Gear Shaping Machine

          used Gear cutting machines Bevel Gear Shaping Machine HEIDENREICH & HARBECK 60 HG


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24057 · Bevel Gear Shaping Machine

          HEIDENREICH & HARBECK - 60 HG - - 1958 -

          Technical details
          min/max. wheel diameter at ratio = 1:10 25 / 600 mm︱gear width 90 mm︱module max. spur toothing 2 -9 Modul︱min/max. pitch cone angle 5 - 90 °︱weight of the machine ca. 5,8 t︱Overall size 3,8 x 2,3 x 1,6 mm︱max. ram stroke 0 - 100 mm︱no. of strokes 63 - 400 /min Stück︱total power requirement 7,2 kW︱
          Machine condition very good compl. standard accessories with adjustment tools, change gears and measure tools video link: http://www.youtube.com/watch?v=oMI-DRWWDLA&feature=youtu.be
            min/max. wheel diameter at ratio. 25 / 600 mm
            gear width 90 mm
            module max. spur toothing 2 -9 Modul
            min/max. pitch cone angle 5 - 90 °
            weight of the machine ca. 5,8 t
            Overall size 3,8 x 2,3 x 1,6 mm
            max. ram stroke 0 - 100 mm
            no. of strokes 63 - 400 /min Stück
            total power requirement 7,2 kW
            Description :
            Machine condition very good
            compl. standard accessories with adjustment tools, change gears and measure tools
            video link:
            http://www.youtube.com/watch?v=oMI-DRWWDLA&feature=youtu.be


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Double Flank Gear Testing Machine

          used Gear cutting machines Double Flank Gear Testing Machine MAHR 898 C


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23151 · Double Flank Gear Testing Machine

          MAHR - 898 C - - 1990 -

          Technical details
          voltage 220 V︱weight of the machine ca. 0,260 t︱dimensions of the machine ca. 1,20 x 0,45 x 1,60 m︱
          - Universal gear testing machine 898 C Determination of the rolling deviation, the rolling contact gap and the circumferential backlash on externally and internally toothed pinions with straight and helical teeth, as well as on bevel and worm gears. - Testing of individual deviations - concentricity deviation and tooth thickness variations on cylindrical gears, bevel gears and worm gears. Technical data: - Adjustable centre distance Between centres 25 - 300 mm Flying support 25 - 550 mm - Maximum permissible wheel weight On the adjusting slide 250 kg On the measuring slide 100 kg - With abutment 898 CD-w4 Centre distance On the measuring slide 50 - 750 mm Throat 140 mm min. Centre distance 65 mm Accessories: - Base cabinet 898 C-us - Feed slide 898 CD-S2 - Electrical equipment 898 CD-e - abutment 898 CD-w4 (centre distance 150-750 mm) - electronic precision indicator "Millitron
            voltage 220 V
            weight of the machine ca. 0,260 t
            dimensions of the machine ca. 1,20 x 0,45 x 1,60 m
            Description :
            - Universal gear testing machine 898 C

            Determination of the rolling deviation, the rolling contact gap and the
            circumferential backlash on externally and internally toothed pinions with
            straight and helical teeth, as well as on bevel and worm gears.

            - Testing of individual deviations -
            concentricity deviation and tooth thickness variations on cylindrical gears,
            bevel gears and worm gears.

            Technical data:

            - Adjustable centre distance
            Between centres 25 - 300 mm
            Flying support 25 - 550 mm

            - Maximum permissible wheel weight
            On the adjusting slide 250 kg
            On the measuring slide 100 kg

            - With abutment 898 CD-w4
            Centre distance
            On the measuring slide 50 - 750 mm
            Throat 140 mm
            min. Centre distance 65 mm

            Accessories:

            - Base cabinet 898 C-us
            - Feed slide 898 CD-S2
            - Electrical equipment 898 CD-e
            - abutment 898 CD-w4 (centre distance 150-750 mm)
            - electronic precision indicator "Millitron



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Grinding Machine

          used Gear cutting machines Gear Grinding Machine REISHAUER RZ 400


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23255 · Gear Grinding Machine

          REISHAUER - RZ 400 - - 2006 - Siemens 840 D

          Technical details
          max. wheel diameter 400 mm︱gear width 250 mm︱max. module 8 ︱min. module 0,5 ︱root circle diameter 10 mm︱number of teeth 5 - 999 ︱max.helical angle +/- 45 °︱weight 12.5 t︱control Siemens 840 D︱
          Machine is in very good condition, test reports available. CNC Siemens 840 D
            max. wheel diameter 400 mm
            gear width 250 mm
            max. module 8
            min. module 0,5
            root circle diameter 10 mm
            number of teeth 5 - 999
            max.helical angle +/- 45 °
            weight 12.5 t
            control Siemens 840 D
            Description :
            Machine is in very good condition, test reports available.
            CNC Siemens 840 D



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Grinding Machine GLEASON- PFAUTER P 1200 G


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24152 · Gear Grinding Machine

          GLEASON- PFAUTER - P 1200 G - - 2004 - Siemens 840D

          Technical details
          max. wheel diameter 1200 mm︱profile depth 80 mm︱radial slide travel 770 mm︱tangential adjustment 300 mm︱maximum axial offset 1000 mm︱pivoting angle +/- 45 Grad︱table diameter 800 mm︱table hole 182 mm︱spindle turning speed - stepless 1200 - 8000 U/min︱table turning speeds 0 - 10 U/min︱control Siemens 840D ︱total power requirement 80 kVA︱weight of the machine ca. 18 t︱dimensions of the machine ca. 7,9 x 7,4 x 4,0 m︱
          Top condition, DIN 3 quality! Onboeard measuring system, filtering system.
            max. wheel diameter 1200 mm
            profile depth 80 mm
            radial slide travel 770 mm
            tangential adjustment 300 mm
            maximum axial offset 1000 mm
            pivoting angle +/- 45 Grad
            table diameter 800 mm
            table hole 182 mm
            spindle turning speed - stepless 1200 - 8000 U/min
            table turning speeds 0 - 10 U/min
            control Siemens 840D
            total power requirement 80 kVA
            weight of the machine ca. 18 t
            dimensions of the machine ca. 7,9 x 7,4 x 4,0 m
            Description :
            Top condition, DIN 3 quality!
            Onboeard measuring system, filtering system.



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Hobbing and Shaping Mach. -combined

          used Gear cutting machines Gear Hobbing and Shaping Mach. -combined DIVERSE Waelzstosswerkzeug


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23026 · Gear Hobbing and Shaping Mach. -combined

          DIVERSE - Waelzstosswerkzeug - - unbekannt -

          Technical details
          amount ca. 103 STK︱
          Various gear shaping tools (approx. 103 pcs.) Make: Lorenz/Liebherr/PWS/Deltal etc. Various gear shaping tools (approx. 103 pcs.) in different sizes and modules. an: - Disc cutting wheels with and without staircase grinding - Bell cutting wheels with and without step grinding - Shank cutting wheels
            amount ca. 103 STK
            Description :
            Various gear shaping tools (approx. 103 pcs.)
            Make: Lorenz/Liebherr/PWS/Deltal etc.

            Various gear shaping tools (approx. 103 pcs.) in different sizes and modules.
            an:
            - Disc cutting wheels with and without staircase grinding
            - Bell cutting wheels with and without step grinding
            - Shank cutting wheels


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Hobbing Machine - Horizontal

          used Gear cutting machines Gear Hobbing Machine - Horizontal BARBER COLMAN 16 - 16


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-19056 · Gear Hobbing Machine - Horizontal

          BARBER COLMAN - 16 - 16 - - ca. 1980 -

          Technical details
          max. wheel diameter 406 mm︱gear width 420 mm︱max. module 4,3 ︱min. module 0,5 ︱hob turning speeds 49 - 246 U/min︱table bore diameter 80 mm︱total power requirement 7 kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 2,8 x 1,6 x 2,2 m︱
            max. wheel diameter 406 mm
            gear width 420 mm
            max. module 4,3
            min. module 0,5
            hob turning speeds 49 - 246 U/min
            table bore diameter 80 mm
            total power requirement 7 kW
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 2,8 x 1,6 x 2,2 m
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal WMW ZFWZ 250 x 5A


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23254 · Gear Hobbing Machine - Horizontal

          WMW - ZFWZ 250 x 5A - - 1975 -

          Technical details
          tool taper MK4 ︱diameter of tools max. Ø 145 mm︱table-size L: 800 x B: 700 mm︱surface area Ø 300 mm︱table travel 200 mm︱indexing max 5 Modul︱total power requirement 7,5 kW︱weight of the machine ca. 4,9 t︱dimensions of the machine ca. 2,8 x 1,5 x 2,3 m︱
          Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 / 240 mm -Counterholder with guide bushes (clamping arbor and milling arbor)
            tool taper MK4
            diameter of tools max. Ø 145 mm
            table-size L: 800 x B: 700 mm
            surface area Ø 300 mm
            table travel 200 mm
            indexing max 5 Modul
            total power requirement 7,5 kW
            weight of the machine ca. 4,9 t
            dimensions of the machine ca. 2,8 x 1,5 x 2,3 m
            Description :
            Additional information:

            Application: Gear hobbing machine for gear cutting of spur and helical gears,
            worm gears and rollable profiles
            Cycle milling and single milling as well as up-cut and climb milling

            Specifications for machining spur and worm gears:
            -Outer Ø max. 250mm with counterholder
            -pitch max. 5mm
            -Tooth helix max. 45°
            -Tooth width max. axial milling 200mm and radial-axial milling 240mm
            -Milling width max. clamping table counterholder 655mm

            Milling slide:
            -swivelling 210°
            -travelling distance 350mm
            -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution

            Further features:
            -counter-point taper MK4, co-rotating
            -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 /
            240 mm
            -Counterholder with guide bushes (clamping arbor and milling arbor)



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23258 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1200 - - 2008 - Siemens 840 D

          Technical details
          max. wheel diameter 1200 mm︱gear width 1000 mm︱max. module 25/36 ︱min. module 1 ︱Control Siemens 840 D ︱table load 15 t︱total power requirement 75 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 6,5x4x3,75 m︱
          Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - 2 x fume separator make "3nine" type EMMA - Chip scraper conveyor - Set of adjusting wedges - Dialogue program "Milling in single-part process" - Switching the machine (dry/wet) - Counterholder tip - travelling - - Magnetic roller - Clamping upper part - complete - Clamping device - complete - Special chip separator - Special chip separator - Signal light (3-coloured) - Telephone diagnosis system - Swivelling counter bearing holder - Monitoring devices - Warm-up programme - Network connection (Ethernet) - Dialogue program "Saving shifting data" - Dialogue program "Saving damaged areas" - 19" flat control panel OP 015A - Rinsing gun - Special software Free travelling counterholder - Intermediate plate 300 mm for raising the counter support position - Milling arbor 40 mm diameter changed to milling arbor 60 mm - BDE/MDE interface in the machine control cabinet - Oil separation systems 3nine System EMMA Working range and technical data: - Nominal workpiece diameter... 1,200 mm - Gear hobbing approx... 25 mm - Tooth moulding approx... 35 mm Guide values depending on the respective machining task Smallest/largest distance between milling cutter and workpiece axis... 100 / 750 mm Largest axial slide path... 1,000 mm (special design) Largest clampable hob cutter - Ø 450 mm Length... 500 mm Swivelling range of the milling head... + 30/- 45º Cutter arbour taper... HSK-B160 (hollow shank taper according to DIN 69063) Largest milling cutter movement... 450 mm Table diameter... 1,200 mm Table bore - Ø 300 mm Depth... 875 mm Maximum table load approx... 15,000 kg Workpiece: - Module max. 25 mm (in steel, 600N/mm²), - Module profile milling max. 35 mm, - Ø max. 1,200 mm, Roll milling cutter: - Head circle Ø max. 450 mm, - length max. 500 mm, - Carriage paths: X/Y/Z- 800 / 450 / 1,000 mm, - Milling head swivelling angle... +A/-A-30/15 degrees, - Hydraulic unit, made by Parker,
            max. wheel diameter 1200 mm
            gear width 1000 mm
            max. module 25/36
            min. module 1
            Control Siemens 840 D
            table load 15 t
            total power requirement 75 kW
            weight of the machine ca. 24 t
            dimensions of the machine ca. 6,5x4x3,75 m
            Description :
            Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and
            worm gears worm gears and all other rolling profiles and shapes that regularly
            occur on the cylindrical workpiece circumference.

            Remark:
            Machine designed for external milling, large milling head M3. Machine with
            counter stand.

            Scope of equipment:
            - Basic machine P 1200, Siemens 840D PowerLine (XP)
            - Motorised milling head M3
            - Special speed series motorised milling head M3
            - Extended software for fault diagnosis
            - Main stand - raised 1000mm
            - 2 x fume separator make "3nine" type EMMA
            - Chip scraper conveyor
            - Set of adjusting wedges
            - Dialogue program "Milling in single-part process"
            - Switching the machine (dry/wet)
            - Counterholder tip - travelling -
            - Magnetic roller
            - Clamping upper part - complete
            - Clamping device - complete - Special chip separator
            - Special chip separator
            - Signal light (3-coloured)
            - Telephone diagnosis system
            - Swivelling counter bearing holder
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - Dialogue program "Saving shifting data"
            - Dialogue program "Saving damaged areas"
            - 19" flat control panel OP 015A
            - Rinsing gun
            - Special software Free travelling counterholder
            - Intermediate plate 300 mm for raising the counter support position
            - Milling arbor 40 mm diameter changed to milling arbor 60 mm
            - BDE/MDE interface in the machine control cabinet
            - Oil separation systems 3nine System EMMA

            Working range and technical data:

            - Nominal workpiece diameter... 1,200 mm
            - Gear hobbing approx... 25 mm
            - Tooth moulding approx... 35 mm

            Guide values depending on the respective machining task

            Smallest/largest distance between milling cutter and workpiece axis... 100 /
            750 mm
            Largest axial slide path... 1,000 mm (special design)

            Largest clampable hob cutter - Ø 450 mm
            Length... 500 mm

            Swivelling range of the milling head... + 30/- 45º
            Cutter arbour taper... HSK-B160 (hollow shank taper according to DIN 69063)

            Largest milling cutter movement... 450 mm
            Table diameter... 1,200 mm

            Table bore - Ø 300 mm
            Depth... 875 mm
            Maximum table load approx... 15,000 kg

            Workpiece:
            - Module max. 25 mm (in steel, 600N/mm²),
            - Module profile milling max. 35 mm,
            - Ø max. 1,200 mm,

            Roll milling cutter:
            - Head circle Ø max. 450 mm,
            - length max. 500 mm,
            - Carriage paths: X/Y/Z- 800 / 450 / 1,000 mm,
            - Milling head swivelling angle... +A/-A-30/15 degrees,
            - Hydraulic unit, made by Parker,


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23256 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1200 - - 2008 - Siemens 840 D PowerLine

          Technical details
          max. wheel diameter 1200 mm︱gear width 1000 mm︱max. module 25/36 Modul︱min. module 1 ︱Control Siemens 840 D PowerLine︱table diameter 1200 mm︱table load 15 t︱total power requirement kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 6,5 x 4 x 3,75 m︱
          Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - Power clamping device - 2 x fume separator make "3nine" type EMMA - Chip scraper conveyor - Set of adjustable wedges - Dialogue program "Milling in single-part process" - Magnetic roller - Special chip separator - Counterholder sleeve - Holder for oscillating pressure bell - Signal light (3-coloured) - Telephone diagnosis system - Swivelling counter bearing holder - Monitoring devices - Warm-up programme - Network connection (Ethernet) - Dialogue program "Saving shifting data" - Dialogue program "Saving damaged areas" - 19" flat control panel OP 015A - Rinsing gun - Special software for free movement of counterholder - Measuring device for P1200 - Intermediate plate 300 mm for raising the counter support position - Milling arbor 40 mm diameter changed to milling arbor 60 mm - BDE/MDE interface in the machine control cabinet - Oil separation systems 3nine System EMMA Working range and technical data: - Nominal workpiece diameter... 1.200 mm - Gear hobbing approx... 25 mm - Tooth moulding approx... 35 mm Guide values depending on the respective machining task. - Smallest/largest distance between milling cutter and workpiece axis 100/750 mm - Largest axial slide path... 1.000 mm (special design) - Largest clampable hob cutter - Ø... 450 mm - Length... 500 mm - Swivelling range of the milling head... .+ 30/- 45º - Cutter arbour taper... HSK-B160 - (hollow shank taper according to DIN 69063) - Largest milling cutter movement... 450 mm - Table diameter . . . . . . . .. .1.200 mm - Table bore - Ø... 300 mm - Depth... 875 mm - Maximum table load approx... 15.000 kg Workpiece: - Module max. 25 mm (in steel, 600N/mm²), - Module profile milling max. 35 mm, - Ø max. 1.200 mm, Roll milling cutter: - Head circle Ø max. 450 mm, - length max. 500 mm, carriage travel: X/Y/Z - 800 /450 / 1.000 mm, - Milling head swivelling angle +A/-A: 30/15 degrees, - Hydraulic unit, Parker, - filter, Indusa, type DL2500N Jet, Year of manufacture 2015, max. air capacity 2.500 m³/hour.
            max. wheel diameter 1200 mm
            gear width 1000 mm
            max. module 25/36 Modul
            min. module 1
            Control Siemens 840 D PowerLine
            table diameter 1200 mm
            table load 15 t
            weight of the machine ca. 24 t
            dimensions of the machine ca. 6,5 x 4 x 3,75 m
            Description :
            Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and
            worm gears worm gears and all other rolling profiles and shapes that regularly
            occur on the cylindrical workpiece circumference.

            Remark:
            Machine designed for external milling, large milling head M3. Machine with
            counter stand.

            Scope of equipment:
            - Basic machine P 1200, Siemens 840D PowerLine (XP)
            - Motorised milling head M3
            - Special speed series motorised milling head M3
            - Extended software for fault diagnosis
            - Main stand - raised 1000mm
            - Power clamping device
            - 2 x fume separator make "3nine" type EMMA
            - Chip scraper conveyor
            - Set of adjustable wedges
            - Dialogue program "Milling in single-part process"
            - Magnetic roller
            - Special chip separator
            - Counterholder sleeve
            - Holder for oscillating pressure bell
            - Signal light (3-coloured)
            - Telephone diagnosis system
            - Swivelling counter bearing holder
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - Dialogue program "Saving shifting data"
            - Dialogue program "Saving damaged areas"
            - 19" flat control panel OP 015A
            - Rinsing gun
            - Special software for free movement of counterholder
            - Measuring device for P1200
            - Intermediate plate 300 mm for raising the counter support position
            - Milling arbor 40 mm diameter changed to milling arbor 60 mm
            - BDE/MDE interface in the machine control cabinet
            - Oil separation systems 3nine System EMMA

            Working range and technical data:

            - Nominal workpiece diameter... 1.200 mm
            - Gear hobbing approx... 25 mm
            - Tooth moulding approx... 35 mm

            Guide values depending on the respective machining task.

            - Smallest/largest distance between milling cutter and workpiece axis 100/750 mm
            - Largest axial slide path... 1.000 mm (special design)
            - Largest clampable hob cutter - Ø... 450 mm
            - Length... 500 mm
            - Swivelling range of the milling head... .+ 30/- 45º
            - Cutter arbour taper... HSK-B160 - (hollow shank taper according to DIN 69063)
            - Largest milling cutter movement... 450 mm
            - Table diameter . . . . . . . .. .1.200 mm
            - Table bore - Ø... 300 mm
            - Depth... 875 mm
            - Maximum table load approx... 15.000 kg

            Workpiece:
            - Module max. 25 mm (in steel, 600N/mm²),
            - Module profile milling max. 35 mm,
            - Ø max. 1.200 mm,

            Roll milling cutter:
            - Head circle Ø max. 450 mm,
            - length max. 500 mm, carriage travel: X/Y/Z - 800 /450 / 1.000 mm,
            - Milling head swivelling angle +A/-A: 30/15 degrees,
            - Hydraulic unit, Parker,
            - filter, Indusa, type DL2500N Jet,
            Year of manufacture 2015, max. air capacity 2.500 m³/hour.


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical PFAUTER P 630


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24054 · Gear Hobbing Machine - Vertical

          PFAUTER - P 630 - - 2000 -

          Technical details
          max. wheel diameter 630 mm︱gear width 410 mm︱max. module 8 ︱min. module 1 ︱milling spindle speeds (infinitely variable) 62 - 390 U/min︱max. milling cutter diameter 192 mm︱cutter length max. 258 mm︱table diameter 550 mm︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 3,7 x 2,5 x 2,1 m︱
          Chip conveyor, change gears, arbors, toolings.
            max. wheel diameter 630 mm
            gear width 410 mm
            max. module 8
            min. module 1
            milling spindle speeds (infinite. 62 - 390 U/min
            max. milling cutter diameter 192 mm
            cutter length max. 258 mm
            table diameter 550 mm
            total power requirement 16 kW
            weight of the machine ca. 7,9 t
            dimensions of the machine ca. 3,7 x 2,5 x 2,1 m
            Description :
            Chip conveyor, change gears, arbors, toolings.



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical HURTH-MODUL WF 315 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23238 · Gear Hobbing Machine - Vertical

          HURTH-MODUL - WF 315 S - - 1998 - 840C Siemens

          Technical details
          Workpiece dimensions 360 mm︱max. workpiece diameter 360 mm︱module 8 mm︱x-travel 400 mm︱y-travel 240 mm︱z-travel 360 mm︱milling head -swivable +/- 45 °︱diameter of hob max. 175 mm︱milling spindle turning speed range: 75-600 U/min.︱ 40 KVA︱control 840C Siemens︱dimensions of the machine ca. 3,10 x 2,40 x 2,70 m︱weight 9 t︱total power requirement 25 kW︱work piece revolutions zweigänig 0,2-60 U/min︱counter-stay slide 450 mm Verfahrweg︱
          Siemens Sinumerik 880 M - control partial gearbox double threaded, automatic workpiece feeding, conversational programm Video link: https://www.youtube.com/watch?v=GkQs8lfeNYk
            Workpiece dimensions 360 mm
            max. workpiece diameter 360 mm
            module 8 mm
            x-travel 400 mm
            y-travel 240 mm
            z-travel 360 mm
            milling head -swivable +/- 45 °
            diameter of hob max. 175 mm
            milling spindle turning speed ra. 75-600 U/min.
            40 KVA
            control 840C Siemens
            dimensions of the machine ca. 3,10 x 2,40 x 2,70 m
            weight 9 t
            total power requirement 25 kW
            work piece revolutions zweigänig 0,2-60 U/min
            counter-stay slide 450 mm Verfahrweg
            Description :
            Siemens Sinumerik 880 M - control
            partial gearbox double threaded, automatic workpiece feeding, conversational
            programm
            Video link:
            https://www.youtube.com/watch?v=GkQs8lfeNYk


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER PE 1200/1600


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24153 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - PE 1200/1600 - - 1997 - Siemens 840 C

          Technical details
          max. wheel diameter 1600 mm︱gear width 700 mm︱max. module 25 ︱min. module 2 ︱x-axis 875 mm︱z-axis 1000 mm︱control Siemens 840 C︱weight 38 t︱milling arbors HSK-B160 ︱table load 15 to t︱arbor support 900 verfahrbar︱total power requirement 100 kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 7,9 x 7,4 x 4,0 m︱
          Sonderfräskopf M2 - Max Fräserdurchmesser 350 mm - Max Fräserlänge 375 mm - Max Fräserverschiebung 300 mm
            max. wheel diameter 1600 mm
            gear width 700 mm
            max. module 25
            min. module 2
            x-axis 875 mm
            z-axis 1000 mm
            control Siemens 840 C
            weight 38 t
            milling arbors HSK-B160
            table load 15 to t
            arbor support 900 verfahrbar
            total power requirement 100 kW
            weight of the machine ca. 27 t
            dimensions of the machine ca. 7,9 x 7,4 x 4,0 m
            Description :
            Sonderfräskopf M2
            - Max Fräserdurchmesser 350 mm
            - Max Fräserlänge 375 mm
            - Max Fräserverschiebung 300 mm


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical WMW-MODUL ZFWZ 400/4


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23076 · Gear Hobbing Machine - Vertical

          WMW-MODUL - ZFWZ 400/4 - - 1985 -

          Technical details
          max. wheel diameter 400 mm︱gear width 275 mm︱gear width 275 mm︱max. module 6 ︱weight of the machine ca. 5,3 t︱shifting 100 mm︱dist. cutter spindle - workpiece spindle 40/265 mm︱hob turning speeds 50-400 U/min︱
            max. wheel diameter 400 mm
            gear width 275 mm
            gear width 275 mm
            max. module 6
            weight of the machine ca. 5,3 t
            shifting 100 mm
            dist. cutter spindle - workpiece. 40/265 mm
            hob turning speeds 50-400 U/min


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical WMW-MODUL ZFWZ 250/5


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23059 · Gear Hobbing Machine - Vertical

          WMW-MODUL - ZFWZ 250/5 - - 1982 -

          Technical details
          max. wheel diameter 250 mm︱gear width 275 mm︱max. module 5 ︱table diameter mm︱weight of the machine ca. 5 t︱
            max. wheel diameter 250 mm
            gear width 275 mm
            max. module 5
            weight of the machine ca. 5 t
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Shaping Machine

          used Gear cutting machines Gear Shaping Machine LORENZ SN 4


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23230 · Gear Shaping Machine

          LORENZ - SN 4 - - ca 1981 -

          Technical details
          max. wheel diameter 180 mm︱gear width 45 mm︱max. module 4 ︱min. module 0,5 ︱stroke length max. 0 - 52 mm︱spindle taper innen MK 4 ︱table diameter 160 mm︱table bore diameter 75 mm︱no. of strokes 355 - 630 Hub/min︱feed range 0,008 - 0,4 mm/Hub︱dimensions of the machine ca. 2,30 x 1,50 x 2,36 m︱power capacity 6 kW︱weight of the machine ca. 2.500 kg︱
            max. wheel diameter 180 mm
            gear width 45 mm
            max. module 4
            min. module 0,5
            stroke length max. 0 - 52 mm
            spindle taper innen MK 4
            table diameter 160 mm
            table bore diameter 75 mm
            no. of strokes 355 - 630 Hub/min
            feed range 0,008 - 0,4 mm/Hub
            dimensions of the machine ca. 2,30 x 1,50 x 2,36 m
            power capacity 6 kW
            weight of the machine ca. 2.500 kg
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ SN 4


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24154 · Gear Shaping Machine

          LORENZ - SN 4 - - ca 1981 -

          Technical details
          max. wheel diameter 180 mm︱gear width 45 mm︱max. module 4 ︱min. module 0,5 ︱stroke length max. 0 - 52 mm︱spindle taper innen MK 4 ︱table diameter 160 mm︱table bore diameter 75 mm︱no. of strokes 355 - 630 Hub/min︱feed range 0,008 - 0,4 mm/Hub︱dimensions of the machine ca. 2,30 x 1,50 x 2,36 m︱power capacity 6 kW︱weight of the machine ca. 2.500 kg︱
            max. wheel diameter 180 mm
            gear width 45 mm
            max. module 4
            min. module 0,5
            stroke length max. 0 - 52 mm
            spindle taper innen MK 4
            table diameter 160 mm
            table bore diameter 75 mm
            no. of strokes 355 - 630 Hub/min
            feed range 0,008 - 0,4 mm/Hub
            dimensions of the machine ca. 2,30 x 1,50 x 2,36 m
            power capacity 6 kW
            weight of the machine ca. 2.500 kg
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine GLEASON- PFAUTER P 1200 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23259 · Gear Shaping Machine

          GLEASON- PFAUTER - P 1200 S - - 2008 - Siemens 840D Powerline

          Technical details
          max. wheel diameter 1200 mm︱gear width 350 mm︱max. module 16 ︱min. module 0,5 ︱max. workpiece diameter 1400 mm︱table diameter 1200 mm︱table hole 300 mm︱control Siemens 840D Powerline︱total power requirement 75 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 5x3x3,8 m︱
          Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process. Special version with hydraulic shaping head H1 SCOPE OF EQUIPMENT: - Basic machine P1200S, Siemens 840D Powerline (XP) - Hydraulic shaping head H1 - Signal light (3-colour) - Extended software for fault diagnosis - Telephone diagnosis system - Chip disposal through table bore - Set of adjusting wedges - Monitoring devices - Warm-up programme - Network connection (Ethernet) - 19" flat control panel OP 015A - Offline version "dialogue programming - Vapour separator make "3nine" type KLARA - Machine installation under floor - Rinsing gun - Mounting device - Cutting wheel holder ( 3 pieces ) - Cutting wheel holder for sheep cutting wheels - Cutting wheel holder for sheep cutting wheels - Special cutting wheel holder - Preparation for retrofitting paper belt filter system - Measuring device for machine P 1200 S - Clamping base body - BDE/MDE interface in the machine control cabinet Modification of vapour separator make "3nine" type Klara type EMMA Working range and technical data: Nominal workpiece diameter External toothing. . . . . . . . 1.200 mm Internal gearing. . . . . . . . 1.200 mm Largest workpiece circulation Ø without counter stand... 1.400 mm Nominal machine module approx. - with hydraulic impact head H1... 16 mm Shaping spindle stroke rate range - with hydraulic shaping head H1 max. 80 min-1 Largest toothing width - with hydraulic shaping head H1... 350 mm Smallest pitch height of the hydrostatic screw guide - with hydraulic shaping head H1... 850 mm Smallest/largest distance between tool and workpiece axis - with hydraulic shaping head H1... 0 - 750 mm Axial slide adjustment range - with hydraulic shaping head H1... 1.100 mm Lowest shaping spindle position above table with hydraulic shaping head H1 ** with upper position Shaping stroke... 560 mm Column side offset range - with hydraulic pusher head H1... +/- 50 mm Mould mounting cone - with hydraulic shaping head H1 - HSK-80(hollow shank taper according to DIN 69063) Workpiece with external gearing: - Module max. 16 mm, - max. toothing width 350 mm, - max. external Ø 1.200 mm, Workpiece with internal gearing: - Module max. 16 mm, - max. toothing width 350 mm, - max. circulation Ø 1.400 mm, - max. internal Ø 1.200 mm, - max. shaping wheel Ø 260 mm, - Mounting in shaping spindle HSK-80, - Slide travel; X/Y/Z- 750 /100 / 1.100 mm, Workpiece table: - Outer Ø 1.200 mm, - bore 300 mm, - max. load 150 kN, - Cooling unit, Küma, type OWT600-3KK, year 2008, - Hydraulic unit, manufactured by Parka, - Centrifuge, made by Steimel, - Air filter, Indusa, type EL4001NTDASECL/O, version AOO, max. air capacity 4.000 m³/h
            max. wheel diameter 1200 mm
            gear width 350 mm
            max. module 16
            min. module 0,5
            max. workpiece diameter 1400 mm
            table diameter 1200 mm
            table hole 300 mm
            control Siemens 840D Powerline
            total power requirement 75 kW
            weight of the machine ca. 24 t
            dimensions of the machine ca. 5x3x3,8 m
            Description :
            Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of
            internally and externally cylindrical gears with internal and external teeth
            and other rolling profiles and moulds profiles and moulds that regularly occur
            on the cylindrical workpiece circumference and for the production of profiles
            in the single part process.

            Special version with hydraulic shaping head H1

            SCOPE OF EQUIPMENT:

            - Basic machine P1200S, Siemens 840D Powerline (XP)
            - Hydraulic shaping head H1
            - Signal light (3-colour)
            - Extended software for fault diagnosis
            - Telephone diagnosis system
            - Chip disposal through table bore
            - Set of adjusting wedges
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - 19" flat control panel OP 015A
            - Offline version "dialogue programming
            - Vapour separator make "3nine" type KLARA
            - Machine installation under floor
            - Rinsing gun
            - Mounting device
            - Cutting wheel holder ( 3 pieces )
            - Cutting wheel holder for sheep cutting wheels
            - Cutting wheel holder for sheep cutting wheels
            - Special cutting wheel holder
            - Preparation for retrofitting paper belt filter system
            - Measuring device for machine P 1200 S
            - Clamping base body
            - BDE/MDE interface in the machine control cabinet
            Modification of vapour separator make "3nine" type Klara type EMMA

            Working range and technical data:

            Nominal workpiece diameter
            External toothing. . . . . . . . 1.200 mm
            Internal gearing. . . . . . . . 1.200 mm

            Largest workpiece circulation Ø without counter stand... 1.400 mm

            Nominal machine module approx.
            - with hydraulic impact head H1... 16 mm

            Shaping spindle stroke rate range
            - with hydraulic shaping head H1 max. 80 min-1

            Largest toothing width
            - with hydraulic shaping head H1... 350 mm

            Smallest pitch height of the hydrostatic screw guide
            - with hydraulic shaping head H1... 850 mm

            Smallest/largest distance between tool and workpiece axis
            - with hydraulic shaping head H1... 0 - 750 mm

            Axial slide adjustment range - with hydraulic shaping head H1... 1.100 mm
            Lowest shaping spindle position above table with hydraulic shaping head H1
            ** with upper position Shaping stroke... 560 mm

            Column side offset range - with hydraulic pusher head H1... +/- 50 mm
            Mould mounting cone - with hydraulic shaping head H1
            - HSK-80(hollow shank taper according to DIN 69063)

            Workpiece with external gearing:
            - Module max. 16 mm,
            - max. toothing width 350 mm,
            - max. external Ø 1.200 mm,

            Workpiece with internal gearing:
            - Module max. 16 mm,
            - max. toothing width 350 mm,
            - max. circulation Ø 1.400 mm,
            - max. internal Ø 1.200 mm,
            - max. shaping wheel Ø 260 mm,
            - Mounting in shaping spindle HSK-80,
            - Slide travel; X/Y/Z- 750 /100 / 1.100 mm,

            Workpiece table:
            - Outer Ø 1.200 mm,
            - bore 300 mm,
            - max. load 150 kN,
            - Cooling unit, Küma, type OWT600-3KK, year 2008,
            - Hydraulic unit, manufactured by Parka,
            - Centrifuge, made by Steimel,
            - Air filter, Indusa, type EL4001NTDASECL/O,
            version AOO, max. air capacity 4.000 m³/h


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine GLEASON-Pfauter GP 130 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24003 · Gear Shaping Machine

          GLEASON-Pfauter - GP 130 S - - 2005 - Siemens 840 D

          Technical details
          max. wheel diameter 130 mm︱gear width 25 mm︱max. module 4 ︱min. module 0,5 ︱Control Siemens 840 D︱strokes - infinitely variable 500-2500 Hub/min︱stroke 30 mm︱work-spindle diameter 85 mm︱total power requirement 49 kW︱weight of the machine ca. 11,5 t︱dimensions of the machine ca. 6,4x4,5x4,4 m︱
          Counterhold without center hydraulically operated counter arm and Linear guides. For automatic ring loader, with 4 stations
            max. wheel diameter 130 mm
            gear width 25 mm
            max. module 4
            min. module 0,5
            Control Siemens 840 D
            strokes - infinitely variable 500-2500 Hub/min
            stroke 30 mm
            work-spindle diameter 85 mm
            total power requirement 49 kW
            weight of the machine ca. 11,5 t
            dimensions of the machine ca. 6,4x4,5x4,4 m
            Description :
            Counterhold without center
            hydraulically operated counter arm and
            Linear guides.
            For automatic ring loader, with 4 stations



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine LORENZ LS 424


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24136 · Gear Shaping Machine

          LORENZ - LS 424 - - 1989 - BWO CNC

          Technical details
          max. wheel diameter 420 mm︱gear width 120 mm︱max. module 8 ︱min. module 0,5 ︱control BWO CNC︱no. of strokes 32-800 Hub/min︱total power requirement 50 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 5,3 x 3,9 x 3,4 m︱
          Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC
            max. wheel diameter 420 mm
            gear width 120 mm
            max. module 8
            min. module 0,5
            control BWO CNC
            no. of strokes 32-800 Hub/min
            total power requirement 50 kW
            weight of the machine ca. 9 t
            dimensions of the machine ca. 5,3 x 3,9 x 3,4 m
            Description :
            Machines increase 100 mm intermediate plate
            automatic Hublageverstellung
            automatic Hublängeverstellung
            5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Testing Machine

          used Gear cutting machines Gear Testing Machine PFAUTER Zahnräder / Wechselräder P 251


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23114 · Gear Testing Machine

          PFAUTER - Zahnräder / Wechselräder P 251 - - unbekannt -

          Technical details
          amount 36 STK.︱
            amount 36 STK.


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine KLINGELNBERG-OERLIKON CS 200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23251 · Gear Testing Machine

          KLINGELNBERG-OERLIKON - CS 200 - - 2004 -

          Technical details
          Clampable cutter head type (max.) 460 mm︱Cutter head weight (max.) 150 kg︱Mounting disc diameter for cutter heads (Ø) 360 mm︱Mounting cone for cutter heads Nominal diameter Ø 58,227 mm︱travel -z axis 200 mm︱diagram-drawing enlargement ±10 - ± 500 µm︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2 x 1,5 x 2,03 m︱
          In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data
            Clampable cutter head type (max.. 460 mm
            Cutter head weight (max.) 150 kg
            Mounting disc diameter for cutte. 360 mm
            Mounting cone for cutter heads N. Ø 58,227 mm
            travel -z axis 200 mm
            diagram-drawing enlargement ±10 - ± 500 µm
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2 x 1,5 x 2,03 m
            Description :
            In the manufacturing process for spiral-toothed bevel gears, the quality of the
            gear cutting gear cutting tools used plays a decisive role. Particularly in
            high gear cutting quality and a long service life can only be achieved with
            precisely can only be achieved with precisely adjusted cutterheads.

            The Oerlikon cutterhead setting and testing device CS 200 enables quick and
            easy setting of the individual knives and simple adjustment of the individual
            knives, it checks the position and documents the measurement results. The
            measuring sequence on the CNC-controlled testing device is partially automated:
            The individual actions for carrying out the actions for carrying out the
            sequence are displayed on the screen via the operator guidance. The positioning
            of the individual knives in the cutter head and the height of the knife tips is
            largely automatic thanks to a special sequence and is simultaneously documented
            by means of a run-out diagram. A subsequent measuring sequence checks the
            radial position of the inner and outer cutting edges of all knives in the
            cutterhead. If individual test parameters on the knives do not correspond to the
            the tolerance specifications, this can be individually repositioned. The
            combination of semi-automated setting sequence, operator-guided set-up actions
            and automatic operator-guided set-up actions and automatic measuring sequence,
            cutterheads can be can be set conveniently, quickly and with high precision.

            Operator-guided setting and test sequence

            - Graphic display of the cutter head design and the measurement results with
            tolerance check
            - Instructions for the operator in plain text Instructions for the operator in
            plain text (without coded information)
            - Simple assignment of the measurement results to the knives
            - Documentation of the setting and measurement results via printer- Setting and
            test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types
            - Interface for neutral data


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •