'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Gear Hobbing and Shaping Mach. -combined

          Machinelist: Gear Hobbing and Shaping Mach. -combined


          Gear Hobbing and Shaping Mach. -combined

          used Gear cutting machines Gear Hobbing and Shaping Mach. -combined DIVERSE Waelzstosswerkzeug


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23026 · Gear Hobbing and Shaping Mach. -combined

          DIVERSE - Waelzstosswerkzeug - - unbekannt -

          Technical details
          amount ca. 103 STK︱
          Various gear shaping tools (approx. 103 pcs.) Make: Lorenz/Liebherr/PWS/Deltal etc. Various gear shaping tools (approx. 103 pcs.) in different sizes and modules. an: - Disc cutting wheels with and without staircase grinding - Bell cutting wheels with and without step grinding - Shank cutting wheels
            amount ca. 103 STK
            Description :
            Various gear shaping tools (approx. 103 pcs.)
            Make: Lorenz/Liebherr/PWS/Deltal etc.

            Various gear shaping tools (approx. 103 pcs.) in different sizes and modules.
            an:
            - Disc cutting wheels with and without staircase grinding
            - Bell cutting wheels with and without step grinding
            - Shank cutting wheels


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing and Shaping Mach. -combined LIEBHERR LCC 150


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3059 · Gear Hobbing and Shaping Mach. -combined

          LIEBHERR - LCC 150 - - 2001 - Siemens 840 C

          Technical details
          Control Siemens 840 C ︱max. module 3 ︱max. workpiece diameter 150 mm︱smallest to mill number of teeth 4 ︱ambient temperature +12°C...+40°C ︱Relative humidity max 90% bei 20°C, max 50% ︱Resolution accuracy 0,1° ︱Milling head swivel spindle +/-45° ︱Toolpiece table load 17 kN︱details shaping unit ︱biggest width of teeth at 23 mm︱max helix angle 45° ︱axisangleadjustment shaping spindle-workpiecetable -0,5°...3.000 DH/min ︱feed rotation axe tool 10...9.420 mm/min ︱feed radial axis machine stand 330-18500 ︱max. behind shaping angle 12° ︱milling head Motorfräskopf ︱hob turning speeds 150...1500 U/min︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱
          Twin-gear-wheels can be manufactured in one operation on the machine. Machine was upgraded to Siemens control 840 D retrofitted. Machine is in very good condition.
            Control Siemens 840 C
            max. module 3
            max. workpiece diameter 150 mm
            smallest to mill number of teeth 4
            ambient temperature +12°C...+40°C
            Relative humidity max 90% bei 20°C, max 50%
            Resolution accuracy 0,1°
            Milling head swivel spindle +/-45°
            Toolpiece table load 17 kN
            biggest width of teeth at 23 mm
            max helix angle 45°
            axisangleadjustment shaping spin. -0,5°...3.000 DH/min
            feed rotation axe tool 10...9.420 mm/min
            feed radial axis machine stand 330-18500
            max. behind shaping angle 12°
            milling head Motorfräskopf
            hob turning speeds 150...1500 U/min
            weight of the machine ca. 15 t
            Description :
            Twin-gear-wheels can be manufactured in one operation on the machine.
            Machine was upgraded to Siemens control 840 D
            retrofitted.
            Machine is in very good condition.


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing and Shaping Mach. -combined HURTH WF10


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06160 · Gear Hobbing and Shaping Mach. -combined

          HURTH - WF10 - - 1989 -

          Technical details
          19147 ︱weight of the machine ca. 4 t︱working width max. 300 mm︱extensive accessories viele Wechselräder ︱max. module 7 Module
            19147
            weight of the machine ca. 4 t
            working width max. 300 mm
            extensive accessories viele Wechselräder
            max. module 7 Module


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing and Shaping Mach. -combined HURTH WF10


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05729 · Gear Hobbing and Shaping Mach. -combined

          HURTH - WF10 - - 1988 -

          Technical details
          weight of the machine ca. 5 t︱working width max. 300 mm︱ 6 ︱extensive accessories viele Wechselräder
            weight of the machine ca. 5 t
            working width max. 300 mm
            6
            extensive accessories viele Wechselräder


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing and Shaping Mach. -combined PFAUTER PA 300 SHOBBER


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-425442 · Gear Hobbing and Shaping Mach. -combined

          PFAUTER - PA 300 SHOBBER - - 1979 -

          Technical details
          max. wheel diameter 350 mm︱gear width 350 mm︱max. module 8 ︱min. module ︱total power requirement 7,5 - 22 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Gear hobber with gear shaping device, 2-cut cycle
            max. wheel diameter 350 mm
            gear width 350 mm
            max. module 8
            total power requirement 7,5 - 22 kW
            Description :
            Gear hobber with gear shaping device, 2-cut cycle


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing and Shaping Mach. -combined GAUTHIER W1


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05648 · Gear Hobbing and Shaping Mach. -combined

          GAUTHIER - W1 - - 1968 -

          Technical details
          module 1,0 mm︱tool taper MK 3 ︱turning speeds von 169 bis 2500 U/min.︱ ︱distance Fräser-Werkstück: 10 - 50 mm︱weight je Stück: 500 kg︱documentation vorhanden ︱number 8 Stück︱
          ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            module 1,0 mm
            tool taper MK 3
            turning speeds von 169 bis 2500 U/min.
            distance Fräser-Werkstück: 10 - 50 mm
            weight je Stück: 500 kg
            documentation vorhanden
            number 8 Stück
            Description :

            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Please note:
            The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.
            Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.
            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Testing Machine

          used Gear cutting machines Gear Testing Machine PFAUTER Zahnräder / Wechselräder P 251


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23114 · Gear Testing Machine

          PFAUTER - Zahnräder / Wechselräder P 251 - - unbekannt -

          Technical details
          amount 36 STK.︱
            amount 36 STK.


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HOEFLER EMZ 632


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16810 · Gear Testing Machine

          HOEFLER - EMZ 632 - - overhauled - Wenzel Win Geco CNC

          Technical details
          max. wheel diameter 630 mm︱gear width 500 mm︱max. module 10 ︱min. module 0,5 ︱max.helical angle 0-90 °︱workpiece weight 100 kg︱centre height 20-1000 mm︱dai. of counterstay center 40 mm︱travel -x axis +/- 115 mm︱travel -y axis -15 bis +320 mm︱travel -z axis 500 mm︱base circle dia. - max. 620 mm︱Control Wenzel Win Geco CNC ︱electrics - voltage/frequency 380/50 V/Hz︱total power requirement 1,6 kVA︱weight of the machine ca. 1,2 t︱range L-W-H 3,4 x 3,2 x 2,5 mm︱
          Gear Test Center will be completely overhauled after Order and equipped with latest control system and software -- Wenzel Win Geco CNC (4 axes) -- Renishaw SP 80H measuring head -- Renishaw measuring systems in X-Y-Z axis -- Heidenhain Exe102 for signal adjustment Turntable SIN/TTL -- Metrotek Software - T-Stylus software: definition of the probes - Software T-Cali: Calibration of the probes - Software T-Align: The eccentricity and tilt of the workpiece axis are determined with the T-Align software. - Software T-Gear for the measurement of: profile, flank, pitch and runout External and internal gears, evaluation of the measurement results according to DIN, AGMA, ISO, Measuring in metric or inch - further software available on request - Conversion is carried out to customer order - Pictures show a completely overhauled machine in new condition - Laser measurement after conversion with highest measuring accuracy - 12 months warranty
            max. wheel diameter 630 mm
            gear width 500 mm
            max. module 10
            min. module 0,5
            max.helical angle 0-90 °
            workpiece weight 100 kg
            centre height 20-1000 mm
            dai. of counterstay center 40 mm
            travel -x axis +/- 115 mm
            travel -y axis -15 bis +320 mm
            travel -z axis 500 mm
            base circle dia. - max. 620 mm
            Control Wenzel Win Geco CNC
            electrics - voltage/frequency 380/50 V/Hz
            total power requirement 1,6 kVA
            weight of the machine ca. 1,2 t
            range L-W-H 3,4 x 3,2 x 2,5 mm
            Description :
            Gear Test Center
            will be completely overhauled after Order and equipped with latest control
            system and software
            -- Wenzel Win Geco CNC (4 axes)
            -- Renishaw SP 80H measuring head
            -- Renishaw measuring systems in X-Y-Z axis
            -- Heidenhain Exe102 for signal adjustment Turntable SIN/TTL
            -- Metrotek Software
            - T-Stylus software: definition of the probes
            - Software T-Cali: Calibration of the probes
            - Software T-Align: The eccentricity and tilt of the workpiece axis
            are determined with the T-Align software.
            - Software T-Gear for the measurement of: profile, flank, pitch and runout
            External and internal gears, evaluation of the measurement results according to
            DIN, AGMA, ISO, Measuring in metric or inch

            - further software available on request
            - Conversion is carried out to customer order
            - Pictures show a completely overhauled machine in new condition
            - Laser measurement after conversion with highest measuring accuracy
            - 12 months warranty




        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine Frenco ZW 401


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23069 · Gear Testing Machine

          Frenco - ZW 401 - - 2014 - Frenco

          Technical details
          max. wheel diameter 400 mm︱gear width 600 mm︱max. module 20 ︱min. module 0,1 ︱Control Frenco ︱total power requirement kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. m︱
            max. wheel diameter 400 mm
            gear width 600 mm
            max. module 20
            min. module 0,1
            Control Frenco
            weight of the machine ca. 1,2 t


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine OERLIKON-KLINGELNBERG R30


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03104 · Gear Testing Machine

          OERLIKON-KLINGELNBERG - R30 - - 2007 -

          Technical details
          max. wheel diameter 400 mm︱gear width - mm︱max. module - ︱workpiece dia. 36-300/400 mm︱axis distance 135-290 mm︱spindle turning speed - stepless 3000 1/min︱dist. between centers 100-550 mm︱Control ︱weight of the machine ca. 4000 kg︱dimensions of the machine ca. 2000x3055x2788 mm︱
          Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)
            max. wheel diameter 400 mm
            gear width - mm
            max. module -
            workpiece dia. 36-300/400 mm
            axis distance 135-290 mm
            spindle turning speed - stepless 3000 1/min
            dist. between centers 100-550 mm
            weight of the machine ca. 4000 kg
            dimensions of the machine ca. 2000x3055x2788 mm
            Description :
            Test method:
            - Single flank rolling test
            - Double flank rolling test
            - Structure-borne noise test
            - Heli testing in two-flank contact.

            Features:
            - Use of up to 6 test slides
            - Highest testing accuracy and repeatability
            - Machine table with workpiece drive
            - Swiveling pneumatic unit
            - Spray oil lubrication (type: Vogel)
            - Oil mist extraction (type: Elbaron)


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine KLINGELNBERG-OERLIKON CS 200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23251 · Gear Testing Machine

          KLINGELNBERG-OERLIKON - CS 200 - - 2004 -

          Technical details
          Clampable cutter head type (max.) 460 mm︱Cutter head weight (max.) 150 kg︱Mounting disc diameter for cutter heads (Ø) 360 mm︱Mounting cone for cutter heads Nominal diameter Ø 58,227 mm︱travel -z axis 200 mm︱diagram-drawing enlargement ±10 - ± 500 µm︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2 x 1,5 x 2,03 m︱
          In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data
            Clampable cutter head type (max.. 460 mm
            Cutter head weight (max.) 150 kg
            Mounting disc diameter for cutte. 360 mm
            Mounting cone for cutter heads N. Ø 58,227 mm
            travel -z axis 200 mm
            diagram-drawing enlargement ±10 - ± 500 µm
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2 x 1,5 x 2,03 m
            Description :
            In the manufacturing process for spiral-toothed bevel gears, the quality of the
            gear cutting gear cutting tools used plays a decisive role. Particularly in
            high gear cutting quality and a long service life can only be achieved with
            precisely can only be achieved with precisely adjusted cutterheads.

            The Oerlikon cutterhead setting and testing device CS 200 enables quick and
            easy setting of the individual knives and simple adjustment of the individual
            knives, it checks the position and documents the measurement results. The
            measuring sequence on the CNC-controlled testing device is partially automated:
            The individual actions for carrying out the actions for carrying out the
            sequence are displayed on the screen via the operator guidance. The positioning
            of the individual knives in the cutter head and the height of the knife tips is
            largely automatic thanks to a special sequence and is simultaneously documented
            by means of a run-out diagram. A subsequent measuring sequence checks the
            radial position of the inner and outer cutting edges of all knives in the
            cutterhead. If individual test parameters on the knives do not correspond to the
            the tolerance specifications, this can be individually repositioned. The
            combination of semi-automated setting sequence, operator-guided set-up actions
            and automatic operator-guided set-up actions and automatic measuring sequence,
            cutterheads can be can be set conveniently, quickly and with high precision.

            Operator-guided setting and test sequence

            - Graphic display of the cutter head design and the measurement results with
            tolerance check
            - Instructions for the operator in plain text Instructions for the operator in
            plain text (without coded information)
            - Simple assignment of the measurement results to the knives
            - Documentation of the setting and measurement results via printer- Setting and
            test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types
            - Interface for neutral data


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine KLINGELNBERG-OERLIKON CS 200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23250 · Gear Testing Machine

          KLINGELNBERG-OERLIKON - CS 200 - - 2002 -

          Technical details
          Clampable cutter head type (max.) 460 mm︱Cutter head weight (max.) 150 kg︱Mounting disc diameter for cutter heads (Ø) 360 mm︱Mounting cone for cutter heads Nominal diameter Ø 58,227 mm︱travel -z axis 200 mm︱diagram-drawing enlargement ±10 - ± 500 µm︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2 x 1,5 x 2,03 m︱
          In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data
            Clampable cutter head type (max.. 460 mm
            Cutter head weight (max.) 150 kg
            Mounting disc diameter for cutte. 360 mm
            Mounting cone for cutter heads N. Ø 58,227 mm
            travel -z axis 200 mm
            diagram-drawing enlargement ±10 - ± 500 µm
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2 x 1,5 x 2,03 m
            Description :
            In the manufacturing process for spiral-toothed bevel gears, the quality of the
            gear cutting gear cutting tools used plays a decisive role. Particularly in
            high gear cutting quality and a long service life can only be achieved with
            precisely can only be achieved with precisely adjusted cutterheads.

            The Oerlikon cutterhead setting and testing device CS 200 enables quick and
            easy setting of the individual knives and simple adjustment of the individual
            knives, it checks the position and documents the measurement results. The
            measuring sequence on the CNC-controlled testing device is partially automated:
            The individual actions for carrying out the actions for carrying out the
            sequence are displayed on the screen via the operator guidance. The positioning
            of the individual knives in the cutter head and the height of the knife tips is
            largely automatic thanks to a special sequence and is simultaneously documented
            by means of a run-out diagram. A subsequent measuring sequence checks the
            radial position of the inner and outer cutting edges of all knives in the
            cutterhead. If individual test parameters on the knives do not correspond to the
            the tolerance specifications, this can be individually repositioned. The
            combination of semi-automated setting sequence, operator-guided set-up actions
            and automatic operator-guided set-up actions and automatic measuring sequence,
            cutterheads can be can be set conveniently, quickly and with high precision.

            Operator-guided setting and test sequence

            - Graphic display of the cutter head design and the measurement results with
            tolerance check
            - Instructions for the operator in plain text Instructions for the operator in
            plain text (without coded information)
            - Simple assignment of the measurement results to the knives
            - Documentation of the setting and measurement results via printer- Setting and
            test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types
            - Interface for neutral data


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HÖFLER H1301/1400


          • ADEM MASCHINEN GMBH
          • Karl-Benz-Straße 1
          • 40764 Langenfeld (Rheinland)
          • Deutschland

          • +49 (0) 2173- 287 77 07
            +49 (0) 2173- 287 77 05
          • adem-maschinen@t-online.de
            www.adem-maschinen.com
          #2000-324 · Gear Testing Machine

          HÖFLER - H1301/1400 - - 1992 -

          Technical details
          max. wheel diameter 1400 mm︱gear width 400 mm︱max. module 25 ︱min. module 1 ︱total power requirement - kW︱weight of the machine ca. 7,0 t︱dimensions of the machine ca. 3,0 x 1,2 x 3,2 m︱
            max. wheel diameter 1400 mm
            gear width 400 mm
            max. module 25
            min. module 1
            total power requirement - kW
            weight of the machine ca. 7,0 t
            dimensions of the machine ca. 3,0 x 1,2 x 3,2 m


        • ADEM MASCHINEN GMBH
        • Karl-Benz-Straße 1
        • 40764 Langenfeld (Rheinland)
        • Deutschland

        • 14.500 €
          Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HÖFLER EMZ 2002 / 2602


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02212 · Gear Testing Machine

          HÖFLER - EMZ 2002 / 2602 - - 1991 -

          Technical details
          max. wheel diameter 20 - 2650 mm︱gear width - mm︱max. module 32 ︱distance between centres 1850 ︱workpiece weight max. 10.000 kg︱
          Machine can be inspected under power. Setting-up and installation at the customers' is possible against extra charges. Equipment / Accessories: - clamping table diameter 1100 mm - steady rest - clamping devices - carriers - levelling shoes - hardware updated to Windows 7 - gears / straight and helical - internal and external gears - measuring of tool cutters (grinding wheels, shaving cutters, milling cutters)
            max. wheel diameter 20 - 2650 mm
            gear width - mm
            max. module 32
            distance between centres 1850
            workpiece weight max. 10.000 kg
            Description :
            Machine can be inspected under power.
            Setting-up and installation at the customers' is possible against extra charges.

            Equipment / Accessories:
            - clamping table diameter 1100 mm
            - steady rest
            - clamping devices
            - carriers
            - levelling shoes
            - hardware updated to Windows 7
            - gears / straight and helical
            - internal and external gears
            - measuring of tool cutters
            (grinding wheels, shaving cutters, milling cutters)


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HOEFLER EMZ 632


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2182 · Gear Testing Machine

          HOEFLER - EMZ 632 - - 1990 - Zeiss

          Technical details
          max. wheel diameter 600 mm︱gear width 500 mm︱max. module 20 ︱min. module 0,5 - 20 ︱table diameter 250 mm︱x-travel 230 mm︱y-travel 340 mm︱z-travel 500 mm︱workpiece weight 350 kg︱Control Zeiss ︱max. workpiece diameter 630 mm︱clamping length 20 - 1000 mm︱max.helical angle 90 °︱workpiece weight max. 350 kg︱total power requirement 2 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 3,0 x 2,0 x 2,4 m︱
          Check the profile, the tooth trace and the pitch on external and internal toothed straight and helical gears. Software hob program! Software Unknown interlocking!
            max. wheel diameter 600 mm
            gear width 500 mm
            max. module 20
            min. module 0,5 - 20
            table diameter 250 mm
            x-travel 230 mm
            y-travel 340 mm
            z-travel 500 mm
            workpiece weight 350 kg
            Control Zeiss
            max. workpiece diameter 630 mm
            clamping length 20 - 1000 mm
            max.helical angle 90 °
            workpiece weight max. 350 kg
            total power requirement 2 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 3,0 x 2,0 x 2,4 m
            Description :
            Check the profile, the tooth trace and the pitch on external and internal
            toothed straight and helical gears.
            Software hob program!
            Software Unknown interlocking!


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HOEFLER EMZ 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-255595 · Gear Testing Machine

          HOEFLER - EMZ 400 - - 1988 -

          Technical details
          max. wheel diameter 400 mm︱gear width 500 mm︱max. module 15 ︱min. module 0,5 ︱total power requirement 2,5 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. m︱
          H O E F L E R (Germany) CNC Controlled 4 Axis Inspection Centre for Gears Model EMZ 400 Year 1988 Serial No. 067 047 ____________________________________________________ Working range: Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm Module range 0.5 – 15 Gear width, max. 500 mm Travel of measuring head, approx. +/- 180 mm Helix angle 0 – 60 ° Max. weight of workpiece, approx. 250 kg Distance between centres, approx. 1,000 mm Distance between centre and body of counter steady 205 mm Table Ø, approx. 290 mm Plotter diagram scales 50 / 100 / 500 / 1000 / 200 : 1 Total electrical load, approx. 1.5 kW - 380 V - 50 Hz Weight 2,000 kg Machine is suitable for measuring: Profile and flank lines on a chosen number of teeth on the gear circumference, as well as tooth pitch and runout tests of gears with straight and helical teeth. Accessories / Special Features ? HOEFLER CNC Measuring Control in 4 axes, with monitor and input terminal, for automatic measuring of various gear profiles on known and unknown (with regard to profile) workpieces. ? X = tangential adjustment of measuring head (cross). ? Y = Radial adjustment of complete measuring slide (250 mm) ? Z = Vertical travel of measuring slide. ? C = Table rotation. ? Automatic feed-in of 3-D measuring probe into the base circle and into tooth gap. ? Automatic evaluation of measuring results according to DIN or AGMA. Printing of results, via plotter or a printer. ? Separate HP Workstation, Model 382, the operator carries on a dialog with the computer during the Measuring process via keyboard. The CNC control of the machine is only needed for installation and Maintenance. ? Flexible hand-held control unit allows manual control of the axes for quick feed or creep feed. Inside the system we have a measuring software available which is developed for the MERCEDES BENZ Company, however all standard gears can be measured with this software. The Machine was recently checked through by a HÖFLER Specialist Condition : Very good – machine can inspected under power by appointment Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract
            max. wheel diameter 400 mm
            gear width 500 mm
            max. module 15
            min. module 0,5
            total power requirement 2,5 kW
            weight of the machine ca. 2 t
            Description :
            H O E F L E R (Germany)
            CNC Controlled 4 Axis Inspection Centre for Gears
            Model EMZ 400 Year 1988 Serial No. 067 047
            ____________________________________________________
            Working range:
            Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm
            Module range 0.5 – 15
            Gear width, max. 500 mm

            Travel of measuring head, approx. +/- 180 mm
            Helix angle 0 – 60 °
            Max. weight of workpiece, approx. 250 kg

            Distance between centres, approx. 1,000 mm
            Distance between centre and body of counter steady 205 mm
            Table Ø, approx. 290 mm
            Plotter diagram scales 50 / 100 / 500 / 1000 / 200 : 1

            Total electrical load, approx. 1.5 kW - 380 V - 50 Hz
            Weight 2,000 kg

            Machine is suitable for measuring:
            Profile and flank lines on a chosen number of teeth on the gear
            circumference, as well as tooth pitch and runout tests of gears with
            straight and helical teeth.

            Accessories / Special Features
            ? HOEFLER CNC Measuring Control in 4 axes, with monitor and input terminal, for automatic measuring of various gear profiles on known and unknown (with regard to profile) workpieces.
            ? X = tangential adjustment of measuring head (cross).
            ? Y = Radial adjustment of complete measuring slide (250 mm)
            ? Z = Vertical travel of measuring slide.
            ? C = Table rotation.
            ? Automatic feed-in of 3-D measuring probe into the base circle and into
            tooth gap.
            ? Automatic evaluation of measuring results according to DIN or AGMA.
            Printing of results, via plotter or a printer.
            ? Separate HP Workstation, Model 382, the operator carries on a dialog
            with the computer during the Measuring process via keyboard. The CNC
            control of the machine is only needed for installation and
            Maintenance.
            ? Flexible hand-held control unit allows manual control of the axes for
            quick feed or creep feed.

            Inside the system we have a measuring software available which is developed
            for the MERCEDES BENZ Company, however all standard gears can be measured
            with this software.
            The Machine was recently checked through by a HÖFLER Specialist

            Condition : Very good – machine can inspected under power by appointment
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine KLINGELNBERG PFSU 1600 HP


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-09135 · Gear Testing Machine

          KLINGELNBERG - PFSU 1600 HP - - 1985/95 -

          Technical details
          max. wheel diameter 1600 mm︱gear width 250 mm︱max. module 20 ︱min. module 1,5 ︱base circle dia. - max. 1450 mm︱base circle dia. - min. 150 mm︱specimen weight from/to 4000 kg︱feeler adjustment movement - parallel 1400 mm︱max.helical angle 0 - 90 °︱wheel diameter with counterstay 1000 mm︱feeler adjustment movement - parallel 800 mm︱centre height 1150 mm︱electrics - voltage/frequency 400 / 50 V/Hz︱dimensions of the machine ca. 2,8 x 2,4 x 2,3 m︱total power requirement 2 kW︱weight of the machine ca. 3 t︱
          Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle; Profile corrections; Helix angles and leads; Lines of contact; Surface roughness; Concentricity of teeth; Tooth to tooth pitch error; Tooth thickness and tooth width over several teeth, Lots of other measuring possibilities. Accesories / Special Features: + Optical setting of base circle and optical angle settings without the use of base circle plates + Heavy workpieces can be tested on the machine. Motor-driven testing process, or manual control using hand wheels. + Auxiliary rotary table, dia. 480 mm, for mounting larger gears, with 2 sets of extending supports 400 and 470 mm long + Counter bracket Model AV 17 with maximum mounting length of 1150 mm + Separate electric cabinet for controlling manual movements, in conjunction with... + GFM Computer, Model ZMP 20 e with software for automatic dressing of gears,for the production of modern measuring printouts with graphics. The graphics are also displayed on a monitor. Various sub-programs and HP printer + Varous probe inserts and small parts, as well as a height adjustable holder for an indexing device, mounted on the back of the machine (but without the indexing device) Levelling feet in very good working condition - Machine can be inspected under power - Serial-Number B 2281
            max. wheel diameter 1600 mm
            gear width 250 mm
            max. module 20
            min. module 1,5
            base circle dia. - max. 1450 mm
            base circle dia. - min. 150 mm
            specimen weight from/to 4000 kg
            feeler adjustment movement - par. 1400 mm
            max.helical angle 0 - 90 °
            wheel diameter with counterstay 1000 mm
            feeler adjustment movement - par. 800 mm
            centre height 1150 mm
            electrics - voltage/frequency 400 / 50 V/Hz
            dimensions of the machine ca. 2,8 x 2,4 x 2,3 m
            total power requirement 2 kW
            weight of the machine ca. 3 t
            Description :
            Universal Involute and Helix Testing Machine - modernized 1995

            Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and
            shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle;
            Profile corrections; Helix angles and leads; Lines of contact; Surface roughness; Concentricity of teeth; Tooth to tooth pitch error; Tooth thickness and tooth width over several teeth, Lots of other measuring possibilities.
            Accesories / Special Features:
            + Optical setting of base circle and optical angle settings without the use of base circle plates
            + Heavy workpieces can be tested on the machine. Motor-driven testing process, or manual control using
            hand wheels.
            + Auxiliary rotary table, dia. 480 mm, for mounting larger gears, with 2 sets of extending supports
            400 and 470 mm long
            + Counter bracket Model AV 17 with maximum mounting length of 1150 mm
            + Separate electric cabinet for controlling manual movements, in conjunction with...
            + GFM Computer, Model ZMP 20 e with software for automatic dressing of gears,for the production of modern measuring printouts with graphics. The graphics are also displayed on a monitor. Various sub-programs and HP printer
            + Varous probe inserts and small parts, as well as a height adjustable holder for an indexing device, mounted
            on the back of the machine (but without the indexing device) Levelling feet

            in very good working condition - Machine can be inspected under power - Serial-Number B 2281


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine KLINGELNBERG PFSU 2500


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-375218 · Gear Testing Machine

          KLINGELNBERG - PFSU 2500 - - 1980 -

          Technical details
          max. wheel diameter 2500 mm︱gear width 0 mm︱max. module 34 ︱min. module 1 ︱total power requirement ca. 15 kW︱weight of the machine ca. 15 t︱dimensions of the machine ca. 4,20 x 2,00 x 2,90 m︱
          Extra große ZR-Prüfmaschine, Gegenhalter
            max. wheel diameter 2500 mm
            max. module 34
            min. module 1
            total power requirement ca. 15 kW
            weight of the machine ca. 15 t
            dimensions of the machine ca. 4,20 x 2,00 x 2,90 m
            Description :
            Extra große ZR-Prüfmaschine, Gegenhalter


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine MAHR 894 C


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-559494 · Gear Testing Machine

          MAHR - 894 C - - 1980 -

          Technical details
          max. wheel diameter 400 mm︱gear width NA mm︱max. module 5 ︱min. module ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Manual Two Flank Gear Tester
            max. wheel diameter 400 mm
            gear width NA mm
            max. module 5
            Description :
            Manual Two Flank Gear Tester


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine KLINGELNBERG PFSU 1600


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-422129 · Gear Testing Machine

          KLINGELNBERG - PFSU 1600 - - 1975 -

          Technical details
          max. wheel diameter 160 - 1.600 mm︱gear width 250 mm︱max. module 20 ︱min. module 1,5 ︱total power requirement 1 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. m︱
            max. wheel diameter 160 - 1.600 mm
            gear width 250 mm
            max. module 20
            min. module 1,5
            total power requirement 1 kW
            weight of the machine ca. 3 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine MAHR 895


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-547677 · Gear Testing Machine

          MAHR - 895 - - 1965 -

          Technical details
          max. wheel diameter 120 mm︱gear width 160 mm︱max. module 3 ︱min. module ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Two Flank Gear Tester
            max. wheel diameter 120 mm
            gear width 160 mm
            max. module 3
            Description :
            Two Flank Gear Tester


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine MAAG DAS 1


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-568700 · Gear Testing Machine

          MAAG - DAS 1 - - 1945 -

          Technical details
          max. wheel diameter NA mm︱gear width NA mm︱max. module ︱min. module ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Manually operated 2-Flank Gear Tester
            max. wheel diameter NA mm
            gear width NA mm
            Description :
            Manually operated 2-Flank Gear Tester


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine MAAG PZH 60


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02626 · Gear Testing Machine

          MAAG - PZH 60 - - -

          Technical details
          max. wheel diameter 600 mm︱gear width 150 mm︱max. module 15 ︱min. module 1 ︱clamping length min. 45 mm︱clamping length max. 750 mm︱workpiece weight 150 kg︱total power requirement kW︱weight of the machine ca. 0,55 t︱dimensions of the machine ca. 1,2x0,8x1,95 m︱
            max. wheel diameter 600 mm
            gear width 150 mm
            max. module 15
            min. module 1
            clamping length min. 45 mm
            clamping length max. 750 mm
            workpiece weight 150 kg
            weight of the machine ca. 0,55 t
            dimensions of the machine ca. 1,2x0,8x1,95 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Testing Machine HOEFLER EVTM


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80287 · Gear Testing Machine

          HOEFLER - EVTM - - -

          Technical details
          max. wheel diameter 0 mm︱gear width 0 mm︱max. module 40 ︱min. module 1 ︱weight of the machine ca. 0,05 t︱dimensions of the machine ca. 0,5x0,3x0,3 m︱
          pitch and run-out tester unit for gear measuring machines.
            max. module 40
            min. module 1
            weight of the machine ca. 0,05 t
            dimensions of the machine ca. 0,5x0,3x0,3 m
            Description :
            pitch and run-out tester unit for gear measuring machines.


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          TOP Manufacturer:

          HURTH - LIEBHERR - DIVERSE - PFAUTER - GAUTHIER -