'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Surface Grinding Machine - Horizontal

          Machinelist: Surface Grinding Machine - Horizontal


          Jig Grinding Machine

          used Grinding machines Jig Grinding Machine HAUSER 3 SM


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-0444 · Jig Grinding Machine

          HAUSER - 3 SM - - unbekannt -

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height 400 mm︱total power requirement - kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2 x 3 x 2 m︱
          jig grinding machine Workspace: 400 x 250 x 400 Drive: 0 Control: 2-axis d.r.o.
            x-travel 400 mm
            y-travel 250 mm
            workpiece height 400 mm
            total power requirement - kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 2 x 3 x 2 m
            Description :
            jig grinding machine



            Workspace: 400 x 250 x 400
            Drive: 0
            Control: 2-axis d.r.o.


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER 3 SMO


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-001788 · Jig Grinding Machine

          HAUSER - 3 SMO - - Serien-No. 907/82 -

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height 500 mm︱grinding diameter max. 220 mm︱table surface area 600 x 320 mm︱throat 310 mm︱range of angles 12 grad︱grinding spindle slide - vertical movement 110 mm︱stroke speeds 0 - 6 m/min.︱grinding spindle speed bis 50.000 U/min.︱peripheral speed max. 35 m/sec︱capacity ca. 7 kVA︱power capacity 6 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 3 x 3 x 3 m︱
          Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz, feed motion in the table
            x-travel 400 mm
            y-travel 250 mm
            workpiece height 500 mm
            grinding diameter max. 220 mm
            table surface area 600 x 320 mm
            throat 310 mm
            range of angles 12 grad
            grinding spindle slide - vertica. 110 mm
            stroke speeds 0 - 6 m/min.
            grinding spindle speed bis 50.000 U/min.
            peripheral speed max. 35 m/sec
            capacity ca. 7 kVA
            power capacity 6 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 3 x 3 x 3 m
            Description :
            Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz,
            feed motion in the table


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S 3 - CNC 314


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-764539 · Jig Grinding Machine

          HAUSER - S 3 - CNC 314 - - 1990 - CNC 314 ELESTA

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height mm︱Control CNC 314 ELESTA ︱total power requirement 15 kW︱weight of the machine ca. 5500 kg︱dimensions of the machine ca. m︱
          H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract
            x-travel 400 mm
            y-travel 250 mm
            Control CNC 314 ELESTA
            total power requirement 15 kW
            weight of the machine ca. 5500 kg
            Description :
            H A U S E R (Switzerland)
            CNC - Controlled High Precision Jig Grinding Machine
            Model S 3 – CNC 314
            Year approx.. 1990 S/N 32086
            ____________________________________________________________

            Table size, approx. 600 x 380 mm
            Max. load on table, approx. 300 kg

            Table travel, longitudinal, max. (X Axis) 400 mm
            Table travel, cross, max. (Y Axis) 250 mm
            Vertical adjustment of grinding head max. (W Axis) 450 mm
            Stroke of grinding spindle, max. (Z Axis) 120 mm
            Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min

            Speed of grinding head stroke 15 – 12.000 mm/min

            Vertical distance between table and grinding spindle, max. 0 – 485 mm
            Distance between grinding spindle and column 350 mm
            Conical grinding, up to max. 16 °
            Grinding Ø bore approx. 230 mm

            Planetary speeds (C-Axis) 5 – 250 rpm
            U Axis, radial infeed 6 mm
            Total electrical load, approx. 15 kW - 400 V - 50 Hz
            Weight/Total weight approx. 4.000/5.500 kg

            Accessories / Special Features:
            • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with
            new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation
            with a free and easy programming for Linear and circle interpolation.
            Direct Input of data on keyboard, also loading data on RS 232 connection.
            There is also a handwheel control device for setting – up purposes.
            Manual feed correction during the working cycle possible.
            • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good
            for blind holes.
            • W Axis for vertical positioning of grinding head slide,
            • U Axis for the infeed cycles during bore grinding, grinds different
            bore-Ø automatically.
            • C Axis Feed for the of the Planetary Head, grinds radii and contours
            • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some
            collets and arbors
            • Built-on Acoustic Grinding Contact Display Device Model KSV 5.
            • Separate coolant unit with band filter. * Built-on fire extinguishing
            system.
            • Separate switch cabinet and control unit, Separate hydraulic unit with
            oilchiller,
            • Central lubrication, service tools, collets and grinding arbors/tools.

            Condition : Very good - Machine can be inspected under power
            commissioned by a Specialist.
            Delivery : Ex stock - as inspected under power.
            Payment : Net, after conclusion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S 3 - CNC 314


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-744584 · Jig Grinding Machine

          HAUSER - S 3 - CNC 314 - - 1987 - ELESTA CNC 314

          Technical details
          x-travel 400 mm︱y-travel 250 mm︱workpiece height 485 mm︱Control ELESTA CNC 314 ︱total power requirement 10 kW︱weight of the machine ca. 4000 kg︱dimensions of the machine ca. m︱
          H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract
            x-travel 400 mm
            y-travel 250 mm
            workpiece height 485 mm
            Control ELESTA CNC 314
            total power requirement 10 kW
            weight of the machine ca. 4000 kg
            Description :
            H A U S E R
            CNC - Controlled Vertical Precision Coordinate Grinding Machine
            Model S 3 – CNC 314
            Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463
            ____________________________________________________________

            Table size, approx. 600 x 380 mm
            Max. load on table, approx. 300 kg

            Table travel, longitudinal, max. (X Axis) 400 mm
            Table travel, cross, max. (Y Axis) 250 mm
            Vertical adjustment of grinding head max. (W Axis) 450 mm
            Stroke of grinding spindle, max. (Z Axis) 120 mm
            Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min

            Speed of grinding head stroke 15 – 7.500 mm/min

            Vertical distance between table and grinding spindle, max. 0 – 485 mm
            Distance between grinding spindle and column 350 mm
            Conical grinding, up to max. 16 °
            Grinding Ø bore approx. 230 mm

            18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm

            Planetary speeds (C-Axis) 5 – 250 rpm
            U Axis, radial infeed 6 mm

            Total electrical load, approx. 10 kW - 380 V - 50 Hz
            Weight, approx. 4.000 kg

            Accessories / Special Features:
            * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with
            monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with
            a free programming,the U-Axis is not interpolating it is just an infeed
            axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis
            W Axis for vertical positioning of grinding head,
            Z Axis as high speed stroke axis, also for blind-hole grinding and
            surface grinding.
            U Axis for the infeed cycles during bore grinding.
            C Axis Feed for the of the Planetary Head.
            * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets
            * Built-on Acoustic Grinding Contact Display Device Model KSV 5.
            * Separate coolant unit with band filter. * Built-on fire extinguishing
            system.
            Separate switch and control cabinet. Covered working area.
            Separate hydraulic unit
            * Central lubrication, service tools.

            Condition : Very good - Machine can be inspected under power.
            Delivery : Ex stock - as inspected under power.
            Payment : Net, after conclusion of contract




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S50 / Adcos


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0447 · Jig Grinding Machine

          HAUSER - S50 / Adcos - - 1986/2018 - Adcos CNC 800

          Technical details
          x-travel 900 mm︱y-travel 600 mm︱workpiece height 500 mm︱Control Adcos CNC 800 ︱total power requirement 8,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Jig Grinding Machine / Brand: Hauser / Type: S 50 / Adcos, Year of construction: 1986, Modernization: 2018 Modernization included: - New drives and electronics - Fire extinguishing unit, Brand: Kraft & Bauer - Extraction unit with stand and special bonnet, Brand: Büchel - Control Adcos CNC 800 - New command unit - Electronic hand wheel - Hydraulic Z-axis lifting unit - ASS with crash sensor The machine can be inspected by appointment under power. Operating hours (26/02/2024): * Total switch-on hours: 32.065 * Spindle hours: 13.414 TECHNICAL SPECIFICATIONS: * Control: Adcos CNC 800 Working range of the slides: Adjustment range: * X-axis (table slide): 900 mm * Y-axis (grinding head): 600 mm * W-axis (movable crossbeam): 600 mm * Z-axis: 170 mm SHZ (Z-axis free programmable in 10 grinding levels) * Workpiece height: approx. 500 mm Accuracy: approx. 5 µ/min Table surface: 640 x 950 mm Load: 1 tonne Working range of the grinding head: Speed with electric motors: 4.000 – 80.000 rpm Speed with air turbines: bis 40.000 und 160.000 rpm EQUIPMENT: * Grinding contact indicator * Extraction system * Fire extinguishing system * Documentation There is no guarantee for correctness and completeness of the technical details and accessories.
            x-travel 900 mm
            y-travel 600 mm
            workpiece height 500 mm
            Control Adcos CNC 800
            total power requirement 8,5 kW
            Description :
            Jig Grinding Machine / Brand: Hauser / Type: S 50 / Adcos,
            Year of construction: 1986, Modernization: 2018

            Modernization included:
            - New drives and electronics
            - Fire extinguishing unit, Brand: Kraft & Bauer
            - Extraction unit with stand and special bonnet, Brand: Büchel
            - Control Adcos CNC 800
            - New command unit
            - Electronic hand wheel
            - Hydraulic Z-axis lifting unit
            - ASS with crash sensor

            The machine can be inspected by appointment under power.

            Operating hours (26/02/2024):
            * Total switch-on hours: 32.065
            * Spindle hours: 13.414

            TECHNICAL SPECIFICATIONS:
            * Control: Adcos CNC 800

            Working range of the slides:
            Adjustment range:
            * X-axis (table slide): 900 mm
            * Y-axis (grinding head): 600 mm
            * W-axis (movable crossbeam): 600 mm
            * Z-axis: 170 mm
            SHZ (Z-axis free programmable in 10 grinding levels)
            * Workpiece height: approx. 500 mm

            Accuracy: approx. 5 µ/min
            Table surface: 640 x 950 mm
            Load: 1 tonne

            Working range of the grinding head:
            Speed with electric motors: 4.000 – 80.000 rpm
            Speed with air turbines: bis 40.000 und 160.000 rpm


            EQUIPMENT:
            * Grinding contact indicator
            * Extraction system
            * Fire extinguishing system
            * Documentation

            There is no guarantee for correctness and completeness of the technical details
            and accessories.


        • Isabelle Knops
        • Opladener Str. 126
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER S 40 - CNC ADCOS 400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-753396 · Jig Grinding Machine

          HAUSER - S 40 - CNC ADCOS 400 - - 1981 - ADCOS CNC 400

          Technical details
          x-travel 650 mm︱y-travel 450 mm︱workpiece height 585 mm︱Control ADCOS CNC 400 ︱total power requirement 15 kW︱weight of the machine ca. 5000 kg︱dimensions of the machine ca. m︱
          H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____________________________________________________________________ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract
            x-travel 650 mm
            y-travel 450 mm
            workpiece height 585 mm
            Control ADCOS CNC 400
            total power requirement 15 kW
            weight of the machine ca. 5000 kg
            Description :
            H A U S E R (Switzerland)
            CNC Controlled Hi Precision Double Column Jig Grinder
            Model S 40 – CNC 311 / ADCOS 400 CNC
            Year 1981 / CNC modernized in 2008 # 0126
            _____________________________________________________________________

            Table size approx. 630 x 770 mm
            Table load capacity approx. 500 kg

            Table travel longitudinal max. (X) 650 mm
            Grinding head slide cross max. (Y) 450 mm

            Vertical adjustment of cross rail max. (W) 500 mm
            Grinding spindle stroke max. (Z) 140 mm
            Stroke number of grinding head (4cycles) 0,5-12 m/min.

            Vertical distance between
            Table/grinding spindle 0-585 mm
            Distance between columns 750 mm
            Conical grinding max. 16 °
            Grinding-Ø bore approx. 230/360 mm

            18 spindle speeds depending on spindle motor
            infinitely variable 4.500-80.000 rpm

            Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min.
            Planetary speed (C) 5-250 rpm
            U-axis, radial feed 6 mm

            Total electrical load approx. 15 kW - 400 V – 50 cycles
            Weight approx. 4.500 kg

            Accessories/ Special Features:
            • CNC Pathcontrol replaced and modernized into a ADCOS Control
            Model CNC 400, (German Manufacturer) including large monitor and
            relevant software, electronic handwheel, for following axis:
            X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke,
            C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail.
            • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding,
            Pre-selection of reversing stops (start movement + teach-in) and of
            stroke speed (infinitely variable),
            • U-axis as manual and controlled feed-axis radial, mounted on grinding
            head, with electr.display of feeding size
            1 Grinding motor mounted on spindle, maybe up to a spindle speed of
            30.000 rpm,
            • Mounted accustic grinding contact-display device KSV 5
            • Separate standing coolant facility, switching- and control cabinet,
            separate hydraulic system, central lubrication system, dust suction, etc

            Condition : very good / can be inspected under power
            Delivery : ex stock – as inspected
            Payment : net – after completion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER  3SM  DR


          • INDUBA GmbH
          • Tuttlinger Straße 51
          • 78628 Rottweil
          • Deutschland

          • 0741 21787
            0741 13562
          • info@induba.de
            www.induba.de
          #2002-10022 · Jig Grinding Machine

          HAUSER - 3SM DR - - 1977 -

          Technical details
          x-travel mm︱y-travel mm︱


        • INDUBA GmbH
        • Tuttlinger Straße 51
        • 78628 Rottweil
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine Moore No. 2c


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12165 · Jig Grinding Machine

          Moore - No. 2c - - 1975 -

          Technical details
          x-travel 420 mm︱y-travel 270 mm︱workpiece height - mm︱table-size 254 x 482 mm︱throat 254 / 318 mm︱grinding spindle speeds 12. - 60.000 U/min.︱spindle stroke 92 mm︱spindle turning speed range 90, 136, 184, 280 U/min︱number of strokes adjustable 2 - 120 Hübe bei 51 mm︱0 1,25 µm bei 30 mm︱Required air-pressure 7 bar︱weight of the machine ca. 1430 kg︱dimensions of the machine ca. 1,45 x 1,2 x 2,4 m︱Electric 380 Volt ︱Tool cupboard 2 ︱Rotary table Moore 254 mm︱Grinding head with air turbine 4 x
          The Moore gauge grinding machine is equipped with grinding heads that are driven by an air turbine. There are 4 grinding heads available. Pneumohydraulically controlled up and down stroke movement, infinitely adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the measuring spindles with vernier 0.001 mm, contour grinding, cone grinding, groove grinding, eccentric adjustment of the grinding spindle. Machine body made of Meehanit cast, strong internal ribbing, cross slide fully supported - no overhang of the table, heating in the main spindle housing. Special price! Machine dealer with own stock of 1600 m².
            x-travel 420 mm
            y-travel 270 mm
            workpiece height - mm
            table-size 254 x 482 mm
            throat 254 / 318 mm
            grinding spindle speeds 12. - 60.000 U/min.
            spindle stroke 92 mm
            spindle turning speed range 90, 136, 184, 280 U/min
            number of strokes adjustable 2 - 120 Hübe bei 51 mm
            0 1,25 µm bei 30 mm
            Required air-pressure 7 bar
            weight of the machine ca. 1430 kg
            dimensions of the machine ca. 1,45 x 1,2 x 2,4 m
            Tool cupboard 2
            Rotary table Moore 254 mm
            Grinding head with air turbine 4 x
            Description :
            The Moore gauge grinding machine is equipped with grinding heads that are
            driven by an air turbine. There are 4 grinding heads available.
            Pneumohydraulically controlled up and down stroke movement, infinitely
            adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the
            measuring spindles with vernier 0.001 mm, contour grinding, cone grinding,
            groove grinding, eccentric adjustment of the grinding spindle. Machine body
            made of Meehanit cast, strong internal ribbing, cross slide fully supported -
            no overhang of the table, heating in the main spindle housing.
            Special price!
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine HAUSER 5 SM


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2945 · Jig Grinding Machine

          HAUSER - 5 SM - - 1971 - Digitalanzeige

          Technical details
          x-travel 700 mm︱y-travel 500 mm︱workpiece height 675 mm︱table surface area 900 x 770 mm︱column daylight 840 mm︱turning speed range - grinding spindle 9 - 45.000 U/min︱total power requirement 6,5 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3,6 x 5 m︱control Digitalanzeige
            x-travel 700 mm
            y-travel 500 mm
            workpiece height 675 mm
            table surface area 900 x 770 mm
            column daylight 840 mm
            turning speed range - grinding s. 9 - 45.000 U/min
            total power requirement 6,5 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3,6 x 5 m
            control Digitalanzeige


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Jig Grinding Machine MOORE Nr. 3


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6633 · Jig Grinding Machine

          MOORE - Nr. 3 - - 1969 -

          Technical details
          x-travel 280 mm︱y-travel 460 mm︱table-size 280x610 mm︱table movement 280x460 mm︱spindle turning speed range 40-2500 U/min︱grinding range 5,0-125 mm︱spindle diameter mm︱grinding depth 0,4-5 mm︱stroke length max. 92 mm︱total power requirement kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 2x1,5x2,8 m︱
          Single Column Jig Grinder, conventional, DRO, accessories
            x-travel 280 mm
            y-travel 460 mm
            table-size 280x610 mm
            table movement 280x460 mm
            spindle turning speed range 40-2500 U/min
            grinding range 5,0-125 mm
            grinding depth 0,4-5 mm
            stroke length max. 92 mm
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 2x1,5x2,8 m
            Description :
            Single Column Jig Grinder, conventional, DRO, accessories


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact

          Surface Grinding Machine - Horizontal

          used Grinding machines Surface Grinding Machine - Horizontal MAEGERLE F 10


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-10020 · Surface Grinding Machine - Horizontal

          MAEGERLE - F 10 - - unbekannt -

          Technical details
          grinding length 1000 mm︱grinding width 300 mm︱workpiece height 230 mm︱table surface area 1000 x 240 mm︱x-travel 1000 mm︱y-travel 270 mm︱z-travel 350 mm︱grinding wheel diameter 240 mm︱grinding spindle speed 2180 U/min︱table speed -stepless- 3 - 30 m/min︱total power requirement 4,5 kW︱weight of the machine ca. 2,8 t︱dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m︱
          Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment
            grinding length 1000 mm
            grinding width 300 mm
            workpiece height 230 mm
            table surface area 1000 x 240 mm
            x-travel 1000 mm
            y-travel 270 mm
            z-travel 350 mm
            grinding wheel diameter 240 mm
            grinding spindle speed 2180 U/min
            table speed -stepless- 3 - 30 m/min
            total power requirement 4,5 kW
            weight of the machine ca. 2,8 t
            dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m
            Description :
            Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange
            (ø 240 x 25 mm), wet grinding attachment


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ABA / ZIERSCH & BALTRUSCH ECOLINE 1206 A


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2252 · Surface Grinding Machine - Horizontal

          ABA / ZIERSCH & BALTRUSCH - ECOLINE 1206 A - - 2008 - SIEMENS LC 200 / TP277

          Technical details
          grinding length 1250 mm︱grinding width 600 mm︱workpiece height mm︱Control SIEMENS LC 200 / TP277 ︱total power requirement kW︱weight of the machine ca. 7,7 t︱dimensions of the machine ca. m︱
          CNC precision, surface and profile grinding machine CNC control SIEMENS LC 200 / TP277 Table load maximum to the magnetic chuck 1200 kg Drives: X-axis drive hydraulic Y and Z-axis drive with servo drive and ball screw measuring system: X-axis rotary with rotary encoder Y and Z axis linear scale traverse paths X axis 1400mm Y axis 600mm Z axis 600mm Grinding length 1250 mm Grinding width 600 Distance between table and spindle center 700 mm Grinding wheel diameter 400 mm Grinding wheel width 100 mm Grinding wheel bore 127 mm
            grinding length 1250 mm
            grinding width 600 mm
            Control SIEMENS LC 200 / TP277
            weight of the machine ca. 7,7 t
            Description :
            CNC precision, surface and profile grinding machine

            CNC control SIEMENS LC 200 / TP277

            Table load maximum to the magnetic chuck 1200 kg
            Drives:
            X-axis drive hydraulic
            Y and Z-axis drive with servo drive and ball screw
            measuring system:
            X-axis rotary with rotary encoder
            Y and Z axis linear scale
            traverse paths
            X axis 1400mm
            Y axis 600mm
            Z axis 600mm
            Grinding length 1250 mm
            Grinding width 600
            Distance between table and spindle center 700 mm

            Grinding wheel diameter 400 mm
            Grinding wheel width 100 mm
            Grinding wheel bore 127 mm


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal BLOHM Planomat 612


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9014 · Surface Grinding Machine - Horizontal

          BLOHM - Planomat 612 - - 2006 - Ergomatic Blohm

          Technical details
          grinding length 1.200 mm︱grinding width 600 mm︱workpiece height 550 mm︱control Ergomatic Blohm︱Grinding spindle: ︱max. spindle speed 1.450 1/min︱driving power - grinding spindle 7,5 kW︱grinding wheel diam. min/max. 190 / 400 mm︱grinding wheel wide min./max. 30 / 80 mm︱grinding wheel width (Standard) 50 mm︱grinding wheel hole diameter 127 mm︱movement areas: ︱x-travel 1.300 mm︱y-travel 550 mm︱z-travel 560 mm︱work table: ︱distance grinding spindle - table min./max. 150 / 700 mm︱table surface area 1.200 x 600 mm︱table height over floor 950 mm︱table adjustment - longitudinal 1.300 mm︱
          Surface Grinding Machine - Horizontal BLOHM - Planomat 612
            grinding length 1.200 mm
            grinding width 600 mm
            workpiece height 550 mm
            control Ergomatic Blohm
            max. spindle speed 1.450 1/min
            driving power - grinding spindle 7,5 kW
            grinding wheel diam. min/max. 190 / 400 mm
            grinding wheel wide min./max. 30 / 80 mm
            grinding wheel width (Standard) 50 mm
            grinding wheel hole diameter 127 mm
            x-travel 1.300 mm
            y-travel 550 mm
            z-travel 560 mm
            distance grinding spindle - tabl. 150 / 700 mm
            table surface area 1.200 x 600 mm
            table height over floor 950 mm
            table adjustment - longitudinal 1.300 mm
            Description :
            Surface Grinding Machine - Horizontal
            BLOHM - Planomat 612


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ELB Perfekt 15 SPS


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-061692 · Surface Grinding Machine - Horizontal

          ELB - Perfekt 15 SPS - - 2005 -

          Technical details
          grinding length 1500 mm︱grinding width 600 mm︱workpiece height 400 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - automatic infeed - electro magnet - coolant device Technische Daten / technical details: Schleiflänge / grinding length 1500 mm Schleifbreite / grinding width 600 mm Werkstückhöhe / workpiece height 400 mm Längsachse X / longitudinal travel X 1600 mm Querachse Z / cross travel Z 560 mm Vertikalachse Y / vertical travel Y 400 mm Elektromagnetabmessungen / electro magnet dimensions 1500x600 mm Schleifscheibe / grinding wheel 400x100x127 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 10 kW Gewicht der Maschine ca. / weight ca. 7100 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            grinding length 1500 mm
            grinding width 600 mm
            workpiece height 400 mm
            Description :
            - automatic infeed
            - electro magnet
            - coolant device

            Technische Daten / technical details:
            Schleiflänge / grinding length 1500 mm
            Schleifbreite / grinding width 600 mm
            Werkstückhöhe / workpiece height 400 mm
            Längsachse X / longitudinal travel X 1600 mm
            Querachse Z / cross travel Z 560 mm
            Vertikalachse Y / vertical travel Y 400 mm
            Elektromagnetabmessungen / electro magnet dimensions 1500x600 mm
            Schleifscheibe / grinding wheel 400x100x127 mm
            Antriebsleistung Schleifspindel / drive capacity grinding spindle 10 kW
            Gewicht der Maschine ca. / weight ca. 7100 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ABA / ZIERSCH & BALTRUSCH Starline 600E NC-SP


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4675 · Surface Grinding Machine - Horizontal

          ABA / ZIERSCH & BALTRUSCH - Starline 600E NC-SP - - 2004 -

          Technical details
          grinding length 600 mm︱grinding width 500 mm︱workpiece height 500 mm︱table-size 800x400 mm︱table speeds 1-35 m/min︱grinding wheel diameter 400 mm︱spindle drive 11 kW︱weight of the machine ca. 4.5 t︱
          SURFACE % PROFILE GRINDING MACHINE magnetic plate 600x300mm Dresser on table Exhausting device More details on www.marcels-maschinen.ch
            grinding length 600 mm
            grinding width 500 mm
            workpiece height 500 mm
            table-size 800x400 mm
            table speeds 1-35 m/min
            grinding wheel diameter 400 mm
            spindle drive 11 kW
            weight of the machine ca. 4.5 t
            Description :
            SURFACE % PROFILE GRINDING MACHINE

            magnetic plate 600x300mm
            Dresser on table
            Exhausting device

            More details on www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ABA Powerline


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1599 · Surface Grinding Machine - Horizontal

          ABA - Powerline - - 2001-2023 - SINUMERK 840 D

          Technical details
          grinding length 1.000 mm︱grinding width 600 mm︱workpiece height 400 mm︱Control SINUMERK 840 D ︱Grinding Area : ︱grinding range max. 1.000 x 600 mm︱travel cross (z-axis) 540 mm︱distance table surface - grinding spindle centre max. 600 mm︱Travel vertical (Y-axis) 500 mm︱Max. working height on new grinding wheel 400 mm︱workpiece table : ︱Electro permanent magnetic plate 800 x 500 mm︱pole pitch 18 mm︱clamping force in 8 levels - ︱Table drive (X-axis) : ︱Incremental encoder in the longitudinal axis X axi - ︱table speeds 2-35.000 mm/min︱Electromechanical longitudinal movement - ︱by means of digital servo motor, - ︱toothed belt and ball screw -
          Equipment and accessories - Linear measuring systems in Y- and Z-axis - All linear axes with digital servo motors and ball screw drive - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar - Manual coolant nozzles - adjustable - Automatic working chamber door pneumatically controlled - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm - Automatic grinding wheel balancing device Fa. MPM - Full enclosure of the working area in stainless steel partial execution with LED working area lighting - Manually operated door, safety interlock in automatic mode - Portable electronic handwheel in automatic and manual mode for all axes - Three-color signal light - Electrical equipment 400V/50Hz - Switch cabinet cooling unit - Machine feet - Painting RAL 9002 (grey white), RAL 5010 (gentian blue) - Rinsing gun with hose and holder in the operating area - Approx. 5 pcs. grinding wheel flanges *** Machine prepared for grinding mist suction *** Grinding programs - Surface grinding - Plunge grinding - Profile grinding - Automatic program sequence with roughing, finishing, fine finishing and burnout - Multiple plunge-cut grinding for economical production - Surface grinding with continuous, infinitely programmable cross feed - Calibration of the grinding wheel (calibrate, backfeed, round corners) - Face grinding with back pull dressing - Dressing in grinding cycle with lift-off amount - Fully automatic compensation of dressing amounts - Tool management Dressing Technology Table dresser -straight- TAG: Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding, suitable for corundum and silicon carbide grinding wheels, cycle software with input menu Pre-profiler VPG-150: incl. diamond roughing wheel width 1.5 mm For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for pre-profiling Table profile dresser TAD: Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°. Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°, profiling in the program by means of graphical operator guidance in 3-D interpolation
            grinding length 1.000 mm
            grinding width 600 mm
            workpiece height 400 mm
            Control SINUMERK 840 D
            Grinding Area :
            grinding range max. 1.000 x 600 mm
            travel cross (z-axis) 540 mm
            distance table surface - grindin. max. 600 mm
            Travel vertical (Y-axis) 500 mm
            Max. working height on new grind. 400 mm
            workpiece table :
            Electro permanent magnetic plate 800 x 500 mm
            pole pitch 18 mm
            clamping force in 8 levels -
            Table drive (X-axis) :
            Incremental encoder in the longi. -
            table speeds 2-35.000 mm/min
            Electromechanical longitudinal m. -
            by means of digital servo motor, -
            toothed belt and ball screw -
            Description :
            Equipment and accessories
            - Linear measuring systems in Y- and Z-axis
            - All linear axes with digital servo motors and ball screw drive
            - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar
            - Manual coolant nozzles - adjustable
            - Automatic working chamber door pneumatically controlled
            - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm
            - Automatic grinding wheel balancing device Fa. MPM
            - Full enclosure of the working area in stainless steel partial execution with LED working area lighting
            - Manually operated door, safety interlock in automatic mode
            - Portable electronic handwheel in automatic and manual mode for all axes
            - Three-color signal light
            - Electrical equipment 400V/50Hz
            - Switch cabinet cooling unit
            - Machine feet
            - Painting RAL 9002 (grey white), RAL 5010 (gentian blue)
            - Rinsing gun with hose and holder in the operating area
            - Approx. 5 pcs. grinding wheel flanges

            *** Machine prepared for grinding mist suction ***




            Grinding programs
            - Surface grinding
            - Plunge grinding
            - Profile grinding
            - Automatic program sequence with roughing, finishing, fine finishing and burnout
            - Multiple plunge-cut grinding for economical production
            - Surface grinding with continuous, infinitely programmable cross feed
            - Calibration of the grinding wheel (calibrate, backfeed, round corners)
            - Face grinding with back pull dressing
            - Dressing in grinding cycle with lift-off amount
            - Fully automatic compensation of dressing amounts
            - Tool management


            Dressing Technology

            Table dresser -straight- TAG:
            Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding,
            suitable for corundum and silicon carbide grinding wheels, cycle software with input menu

            Pre-profiler VPG-150:
            incl. diamond roughing wheel width 1.5 mm
            For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for
            pre-profiling

            Table profile dresser TAD:
            Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°.
            Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°,
            profiling in the program by means of graphical operator guidance in 3-D interpolation




        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal DANOBAT PSG - 1000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08117 · Surface Grinding Machine - Horizontal

          DANOBAT - PSG - 1000 - - 2001 - Fanuc 210i - M

          Technical details
          grinding length 1000 mm︱grinding width 600 mm︱workpiece height 450 mm︱Control Fanuc 210i - M ︱total power requirement 20 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 3950 x 3150 x 2550 mm︱
          CNC surface grinding machine Clamping area of the table 1000 x 500 mm Clamping surface for magnetic particle board 1000 x 500 mm Largest grinding surface: L x W x H 1000 x 600 x 450 mm Largest distance from table to spindle center 650 mm Table speed in the longitudinal direction 1 - 30 m / min Max. Table load 1500 kg Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm Grinding spindle drive 7.5 kW Spindle speed 1500 rpm Connected load 20 kW Space required L x W x H 3950 x 3150 x 2550 mm Weight 5500 kg Equipment CNC control Fanuc 210i - M Electro magnetic plate 1000 x 500 mm Coolant device with paper filter Several Grinding wheels with flanges Digital display Condition machine is in good condition
            grinding length 1000 mm
            grinding width 600 mm
            workpiece height 450 mm
            Control Fanuc 210i - M
            total power requirement 20 kW
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 3950 x 3150 x 2550 mm
            Description :
            CNC surface grinding machine

            Clamping area of the table 1000 x 500 mm
            Clamping surface for magnetic particle board 1000 x 500 mm
            Largest grinding surface: L x W x H 1000 x 600 x 450 mm
            Largest distance from table to spindle center 650 mm
            Table speed in the longitudinal direction 1 - 30 m / min
            Max. Table load 1500 kg
            Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm
            Grinding spindle drive 7.5 kW
            Spindle speed 1500 rpm
            Connected load 20 kW
            Space required L x W x H 3950 x 3150 x 2550 mm
            Weight 5500 kg

            Equipment
            CNC control Fanuc 210i - M
            Electro magnetic plate 1000 x 500 mm
            Coolant device with paper filter
            Several Grinding wheels with flanges
            Digital display

            Condition machine is in good condition


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ZIERSCH & BALTRUSCH Starline 500 E


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9054 · Surface Grinding Machine - Horizontal

          ZIERSCH & BALTRUSCH - Starline 500 E - - 2001 - Simatic OP 27 Siemens

          Technical details
          grinding length max. 600 mm︱grinding width max. 250 mm︱workpiece height - mm︱control Simatic OP 27 Siemens︱grinding range 600 x 250 mm︱distance spindle center to table 500 mm︱Grinding spindle: ︱turning speed range - stepless 1.000 - 3.000 U/min︱grinding head 300 x 50 x 76,2 mm︱drive capacity - spindle motor ca. 11 kW︱axis stroke: ︱x - axis 600 mm︱Y - Axis 300 mm︱Z - Axis 250 mm︱work table: ︱magnetic clamping plate 500 x 250 mm︱max. workpiece weight 250 kg︱feeds: ︱rapid traverse ( X / Y / Z ) 30 / 2 / 1,5 m/min︱total power requirement 20 kVA︱
          Surface Grinding Machine Horizontal Ziersch & Baltrusch - Starline 500 E - approx. 9.340 spindle hours - 4x NEW grinding wheels - 4x flanges - LTA suction with stand - Splash guard for work area (half height) - protective door - Infinitely variable speed control of the grinding spindle - Heidenhain: Incremental measuring system, incremental encoders, proximity switches
            grinding length max. 600 mm
            grinding width max. 250 mm
            workpiece height - mm
            control Simatic OP 27 Siemens
            grinding range 600 x 250 mm
            distance spindle center to table 500 mm
            turning speed range - stepless 1.000 - 3.000 U/min
            grinding head 300 x 50 x 76,2 mm
            drive capacity - spindle motor ca. 11 kW
            x - axis 600 mm
            Y - Axis 300 mm
            Z - Axis 250 mm
            magnetic clamping plate 500 x 250 mm
            max. workpiece weight 250 kg
            rapid traverse ( X / Y / Z ) 30 / 2 / 1,5 m/min
            total power requirement 20 kVA
            Description :
            Surface Grinding Machine Horizontal
            Ziersch & Baltrusch - Starline 500 E

            - approx. 9.340 spindle hours
            - 4x NEW grinding wheels
            - 4x flanges
            - LTA suction with stand

            - Splash guard for work area (half height)
            - protective door
            - Infinitely variable speed control of the grinding spindle
            - Heidenhain:
            Incremental measuring system, incremental encoders, proximity switches


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ZIERSCH & BALTRUSCH FMNC SUPERPLUS ZB84


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18001 · Surface Grinding Machine - Horizontal

          ZIERSCH & BALTRUSCH - FMNC SUPERPLUS ZB84 - - 2000 - Simatic OP27

          Technical details
          grinding length 800 mm︱grinding width 390 mm︱workpiece height 700 mm︱Control Simatic OP27 ︱x-axis 1040 mm︱y-axis 500 mm︱z-axis 390 mm︱spindle speeds (infinitely variable) 1500 - 4000 U/min︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱grinding wheel hole diameter 127 ︱table load capacity 400 KG︱total power requirement 12 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 3,6 x 2,4 x 2,5 m︱
          Grinding spindle KESSLER Clamping magnet SAV 800x400 mm Balancing unit MPM Coolant system with band filter DGS SBF 60 8 Grinding wheel flanges
            grinding length 800 mm
            grinding width 390 mm
            workpiece height 700 mm
            Control Simatic OP27
            x-axis 1040 mm
            y-axis 500 mm
            z-axis 390 mm
            spindle speeds (infinitely varia. 1500 - 4000 U/min
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            grinding wheel hole diameter 127
            table load capacity 400 KG
            total power requirement 12 kW
            weight of the machine ca. 3,3 t
            dimensions of the machine ca. 3,6 x 2,4 x 2,5 m
            Description :
            Grinding spindle KESSLER
            Clamping magnet SAV 800x400 mm
            Balancing unit MPM
            Coolant system with band filter DGS SBF 60
            8 Grinding wheel flanges


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal GEIBEL&HOTZ FS 1050 GT CNC Rh


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-775469 · Surface Grinding Machine - Horizontal

          GEIBEL&HOTZ - FS 1050 GT CNC Rh - - 2000 -

          Technical details
          grinding length 1000 mm︱grinding width 500 mm︱workpiece height 425 mm︱Control ︱total power requirement 15 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. m︱
            grinding length 1000 mm
            grinding width 500 mm
            workpiece height 425 mm
            total power requirement 15 kW
            weight of the machine ca. 4,5 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal BLOHM PLANOMAT 616


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-769774 · Surface Grinding Machine - Horizontal

          BLOHM - PLANOMAT 616 - - 2000 -

          Technical details
          grinding length 1600 mm︱grinding width 600 mm︱workpiece height 500 mm︱total power requirement 50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            grinding length 1600 mm
            grinding width 600 mm
            workpiece height 500 mm
            total power requirement 50 kW


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ROSA LINEA STEEL 13.7


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2254 · Surface Grinding Machine - Horizontal

          ROSA - LINEA STEEL 13.7 - - 2000 - E.C.S. CNC 2401

          Technical details
          grinding length 1500 mm︱grinding width 750 mm︱workpiece height 600 mm︱Control E.C.S. CNC 2401 ︱Table dimensions 1400 x 500 mm︱table load 1700 kg︱dimensions of grinding wheel 400 x 30 x 100 mm︱grinding wheel speed 1450 U/min.︱main drive 11 kW︱table speeds 1 - 40 m/min︱cross feeds: 0 - 4 m/min︱dimensions of machine 5350 x 3100 x 2415 mm︱total power requirement kW︱weight of the machine ca. 9,4 t︱dimensions of the machine ca. m︱
          CNC surface grinding machine in very good condition The machine can be demonstrated under power Equipment: - CNC control E.C.S. CNC 2401 System III - Magnetic plate 1400 x 500 mm - Coolant device with paper band filter Accesories: Machine shoes / fixators Machine documentation Various new spare parts, including coolant pump, grinding wheel with flange, guideway covers, electronics assembly, etc.
            grinding length 1500 mm
            grinding width 750 mm
            workpiece height 600 mm
            Control E.C.S. CNC 2401
            Table dimensions 1400 x 500 mm
            table load 1700 kg
            dimensions of grinding wheel 400 x 30 x 100 mm
            grinding wheel speed 1450 U/min.
            main drive 11 kW
            table speeds 1 - 40 m/min
            cross feeds: 0 - 4 m/min
            dimensions of machine 5350 x 3100 x 2415 mm
            weight of the machine ca. 9,4 t
            Description :
            CNC surface grinding machine in very good condition
            The machine can be demonstrated under power

            Equipment:
            - CNC control E.C.S. CNC 2401 System III
            - Magnetic plate 1400 x 500 mm
            - Coolant device with paper band filter

            Accesories:
            Machine shoes / fixators
            Machine documentation
            Various new spare parts, including coolant pump,
            grinding wheel with flange, guideway covers,
            electronics assembly, etc.


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal GEIBEL & HOTZ FS 635-Z CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-77440 · Surface Grinding Machine - Horizontal

          GEIBEL & HOTZ - FS 635-Z CNC - - 1999 -

          Technical details
          grinding length 600 mm︱grinding width 350 mm︱workpiece height 385 mm︱total power requirement 19 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. m︱
            grinding length 600 mm
            grinding width 350 mm
            workpiece height 385 mm
            total power requirement 19 kW
            weight of the machine ca. 2,3 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal CHEVALIER FSG- 1632


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03150 · Surface Grinding Machine - Horizontal

          CHEVALIER - FSG- 1632 - - 1998 -

          Technical details
          grinding length 810 mm︱grinding width 405 mm︱workpiece height 500 mm︱electro magnetic clamping plate 800 X 400 mm︱table speed -stepless- 5 - 25 m/min︱dimensions of grinding wheel 355 X 50 X 127 mm︱total power requirement 3.7 kW︱weight of the machine ca. 3 t︱
          automatic vertical feed, dressing devise, electro magnet,800 X 400 coolant with paperfilter, hydraulic separate
            grinding length 810 mm
            grinding width 405 mm
            workpiece height 500 mm
            electro magnetic clamping plate 800 X 400 mm
            table speed -stepless- 5 - 25 m/min
            dimensions of grinding wheel 355 X 50 X 127 mm
            total power requirement 3.7 kW
            weight of the machine ca. 3 t
            Description :
            automatic vertical feed, dressing devise, electro magnet,800 X 400
            coolant with paperfilter,
            hydraulic separate


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •