Saws

saw blade diameter 350 mm︱dimensions of saw-blade 350 x 3.4 x 32 mm︱turning speeds 1700 / 3400 U/min︱capacity 90 degrees: round 120 mm︱capacity 90 degrees: square 105 x 105 mm︱capacity 90 degrees: flat 180 x 70 mm︱capacity 45 degrees: round 110 mm︱capacity 45 degrees: square 95 x 95 mm︱capacity 45 degrees: flat 135 x 60 mm︱total power requirement 1.5 / 2.2 kW︱weight of the machine ca. 530 kg.︱range L-W-H 2000 x 1500 x 1700 mm︱

---

** Machine from a workshop for the disabled ** good condition (!!) Furnishing : - fully automatic aluminum circular sawing machine - with input of section length and number of pieces - swiveling control panel, right front - Miter adjustment 45° left/right - pneumatic material clamping (horizontal+vertical) - programmable feed carriage - Micro spray device (oiler) - Machine base, with forklift pockets - original instruction manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9164095 * Machinevideo : https://www.youtube.com/watch?v=XQqvY6g9Y6U

cutting diameter 300 mm︱saw band length 3650 mm︱cutting width 330 mm︱dimensions of saw-band 3650 x 27 x 0,9 mm︱band speed 15 - 100 m/min︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 45 degrees: round li. 260 mm︱capacity 45 degrees: square li. 250 mm︱capacity 45 degrees: flat li. 270 x 200 mm︱capacity 60 degrees: round li. 180 mm︱capacity 60 degrees: square li. 170 mm︱capacity 60 degrees: flat 330 x 260 mm︱motor 2,2 kW︱weight of the machine ca. 1,24 t︱dimensions of the machine ca. 1,9 x 1,8 m︱Control ︱

---

Electro-hydraulic automatic miter band saw for cuts from 0 ° to 60 ° left -new, innovative (Windows CE based) touch screen control -Cutting area around max. 280 mm (solid material) - Required space only 3.42 square meters New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame - Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard. Vice closes / opens automatically, The saw arch is automatically returned to the start of the cut) - Fully automatic operation (10 programs, each with different Quantity (max. 9999) and length (max. 9999.9 mm) with an accuracy of ± 0.1 / 600 mm. Execution of up to 10 combined programs in one cycle. Three different cutting cycles can be selected - Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision - Large-sized deflection discs, adjustable made of cast steel with integrated belt circulation control - Dynamic cutting pressure control (variably programmable, control via Stepper motor due to the torque monitoring of the belt drive) - Precise adjustment of the cutting feed with information in mm / min. - Frequency converter for stepless drive of the tool - X-axis (material feed) via recirculating ball spindle with at least remaining piece 210 mm - Control (Windows CE based) with 7 "touch screen and additional soft- Buttons, backlit display to show all Machine parameters and messages in plain text: Number of cuts (programmed / executed) / cutting speed / lowering speed / preselectable Cutting pressure (in amps) / cutting time / power consumption of the saw band motor / Saw band tension in kg (minimum band tension = 900 kg) / saw frame position (Y- Axis) / feeder position (X-axis) / alarms / faults (description and Causes) / diagnostics ... - Saw band tension with band tension control and indication on the display by means of electronic converter - Base with door - Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area, removable coolant tray 100 liters - Coolant gun for cleaning the machine - Vice with quick adjustment and exchangeable clamping and Stop jaws - Chip removal brush for cleaning the saw band

cutting diameter 300 mm︱saw band length 3650 mm︱cutting width 330 mm︱dimensions of saw-band 3650 x 27 x 0,9 mm︱band speed 15 - 100 m/min︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 45 degrees: round li. 260 / re. 200 mm︱capacity 45 degrees: square li. 250 / re. 180 mm︱capacity 45 degrees: flat li. 270x200 re. 200x160 mm︱capacity 60 degrees: round li. 180 mm︱capacity 60 degrees: square li. 170 mm︱capacity 60 degrees: flat li. 170 x 170 mm︱motor 2,2 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,9 x 1,8 m︱Control Windows CE basiert ︱

---

Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left). -Manual or semi-automatic dynamic cycle to make cuts outside of series production directly without programming. -Numerically controlled band saw machines with the new Windows “CE” based control, specially developed by MEP for automatic machines. FEATURES: -User interface with 7 ”touch screen display and mechanical keys for the operating functions of the sawing machine, guarantees reliable operation, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker -The control console on a swiveling arm enables comfortable and safe operation from any position. -Display and entry of alarm and error messages with the option of displaying incidents that have occurred. - Infinitely variable regulation of the cutting speed from 15 to 100 m / min via frequency converter (inverter). -The latest generation of hydraulic power pack, extremely powerful with low energy consumption. -Material feed with stepper motor via ball screw mounted on opposing ball bearings; 600 mm repeatable single stroke to saw any length. -Positioning of the saw head and movement of the feeder using a joystick. -Automatic detection of the cutting start position. -Hand-operated strap tension control with indication on the display by means of an electronic converter. -Automatic monitoring of the cutting load through a servo valve mounted directly on the cylinder. -The coolant pan (equipped with 2 electric pumps for lubrication and cooling of the saw band) is built into the underframe -The chip drawer can be replaced by a motorized chip conveyor - see special accessories. -Preparation for the installation of the OPTIONAL minimum quantity lubrication system in addition to the conventional standard lubrication with emulsion oil. -Schipping brush. -Bimetal saw band for solid and profile material. -Tool and instructions for use with list of spare parts.

cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: flat 170 x 170 mm︱height of material-table 600 mm︱Pitch min/max 50.000 mm︱vice 335 mm Öffnung︱band speed 15 - 100 m/min︱automatic feeds 600 mm︱dimensions of saw-band 3650 x 27 x 0,9 mm︱total power requirement 2,2 kW︱weight 1.105 kg︱range L-W-H 3,3 x 2,83 x 2,23 m︱

---

Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts

cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: flat 170 x 170 mm︱height of material-table 600 mm︱Pitch min/max 50.000 mm︱vice 335 mm Öffnung︱band speed 15 - 100 m/min︱automatic feeds 600 mm︱dimensions of saw-band 3650 x 27 x 0,9 mm︱total power requirement 2,2 kW︱weight 1.105 kg︱range L-W-H 3,3 x 2,83 x 2,23 m︱

---

Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts

cutting range 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 45 degrees: square 250 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 60 degrees: square 180 mm︱automatic feeds 9999,9 mm︱feed minimum 2 mm︱cutting diameter minimum 5 mm︱band speed 15 - 100 m/min︱vice 340 mm Öffnung︱dimensions of saw-band 3650 x 27 x 0,9 mm︱total power requirement 2,2 kW︱weight 1240 kg︱range L-W-H 1800 x 1900 x 1750 mm︱

---

Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0 ° to 60 ° left - Windows “CE” based MEP 50 control and 7 ”touch screen display - Material feed with stepper motor via recirculating ball screw - 600 mm repeatable single stroke to cut any length - Feeder with protective cover and safety limit switch - Positioning of the saw head and movement of the feeder using the joystick - Automatic recognition of the start of the cut - Electronic strap tension control - Automatic monitoring of the cutting load - Removable coolant pan * (equipped with 2 electric pumps for lubrication and cooling of the saw band) - Instructions DE

cutting range 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 45 degrees: square 250 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 60 degrees: square 180 mm︱automatic feeds 9999,9 mm︱feed minimum 2 mm︱cutting diameter minimum 5 mm︱band speed 15 - 100 m/min︱vice 340 mm Öffnung︱dimensions of saw-band 3650 x 27 x 0,9 mm︱total power requirement 2,2 kW︱weight 1240 kg︱range L-W-H 1800 x 1900 x 1750 mm︱

---

Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0° to 60° left - Windows “CE” based MEP 50 control and 7” touch screen display * Simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs each with a maximum of 9999 pieces and a maximum length of 9999 mm - Material feed with stepper motor via ball screw * Single stroke 600mm repeatable to saw any length * Accuracy of ±0.1/600mm - Feeder with protective cover and safety limit switch - Precise adjustment of the cutting feed in mm/min - Positioning of the saw head and movement of the feeder using a joystick - Automatic detection of the start of the cut - Large deflection pulleys, adjustable made of cast steel - Saw band tension with band tension control and display on the display - Carbide band guides for maximum cutting precision - Automatic monitoring of cutting load - Vice with quick adjustment * with replaceable clamping and stop jaws - Large chip tray and coolant container that can be pulled out to the side * Equipped with 2 electric pumps for lubrication and cooling of the saw band * Coolant gun for cleaning the machine - Chip clearing brush for cleaning the saw band - User manual EN Info from the manufacturer: When installing this saw in the network Residual current circuit breaker (FI) should this all-current sensitive and not under 300 mA.

cutting capacity - round 300 mm︱dimensions of saw-band 3320 x 27 x 0,9 mm︱cutting capacity - flat 330 x 260 mm︱cutting capacity - square 260 mm︱Control evolution ︱work height max. 870 mm︱ 40 / 80 mt/min︱weight of the machine ca. 1050 kg︱

---

cutting diameter 280 mm︱saw band length 3320 x 27 x 0,9 mm mm︱cutting width 330 mm︱Control NC ︱capacity 90 degrees: flat 330x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱band speed 15 - 100 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1,24 t︱dimensions of the machine ca. 3,3 x 2,83 x 2,23 m︱

---

Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep

cutting diameter 300 mm︱saw band length 3320 x 27 x 0,9 mm mm︱cutting width 300 mm︱Control NC ︱capacity 90 degrees: flat 330x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: square 250 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱band speed 15 - 100 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 3,3 x 2,83 x 2,23 m︱

---

Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts