Bandsaw - Horizontal

capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 210 mm︱ 290 x 210 mm︱saw band length 2.965 x 27 x 0,9 mm mm︱table height 940 mm︱band speed 25 - 90 m/min︱total power requirement 1,1 / 1,3 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 1,3 x 0,8 x 1,5 m︱

---

ATTENTION SPECIAL PRICE!!! (20347) Double miter metal band saw with: - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

cutting diameter 220 mm︱saw band length 2455 mm︱table height 850 mm︱cutting width 230 mm︱cutting speed 25 - 80 m/min︱dimensions of saw-band 2455 x 27 x 0,9 mm︱ 90 mm︱ 90 mm︱ 90 x 100 mm︱ 150 ︱Impact energy 150 ︱Air consume per blow 150 x 210 ︱ 220 mm︱stroke back stop 210 mm︱cross-slide 230 x 185 ︱total power requirement 1,2 kW︱weight of the machine ca. 0,24 t︱dimensions of the machine ca. 1,2 x 0,6 x 1,7 m︱

---

SPECIAL PRICE!!! -Miter cuts up to 60° left - Cutting speed 25 - 80m/min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode

cutting diameter 250 mm︱saw band length 3150 x 27 x 0,9 mm︱table height 750 mm︱cutting width 170 x 310 mm︱cutting speed 25 - 90 m/min︱ 130 mm︱ 130 mm︱ 205 mm︱Impact energy 205 mm︱connected load frequency 400 Volt︱total power requirement 1,5 kW︱weight of the machine ca. 0,5 t︱dimensions 0,95 x 1,16 x 1,98 m︱

---

Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm

cutting diameter 300 mm︱saw band length 3320 x 27 x 0,9 mm︱table height mm︱band speed 40/80 m/min︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 670 kg︱dimensions of the machine ca. m︱

---

How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

cutting diameter 227 mm︱saw band length 2455 mm︱table height 900 mm︱cutting width 260 mm︱turning speed range: 36 / 72 m/min︱dimensions of saw-band 2455 x 27 x 0,9 mm︱capacity 90 degrees: round 227 mm︱capacity 90 degrees: square 220 mm︱capacity 90 degrees: flat 260 x 200 mm︱capacity 45 degrees: round 150 mm︱capacity 45 degrees: square 145 mm︱capacity 45 degrees: flat 150 x 125 mm︱total power requirement 1,1 kW︱weight of the machine ca. 0,22 t︱Dimensions (LxWxH) 0,8 x 1,4 x 1,5 0︱

---

Miter band saw - automatic cut - Base frame - Coolant pump - Chip brush for cleaning the saw band - Vise with quick adjustment

capacity 90 degrees: round 310 mm︱capacity 90 degrees: square 280 mm︱ 400x250 ︱saw band length 4020x34x1,1 mm︱band speed 37 + 74 m/min︱table height 940 mm︱total power requirement 1,8/2,2 kW︱weight of the machine ca. 0,68 t︱dimensions of the machine ca. 1,5 x 1,78 x 1,3 m︱

---

ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

cutting diameter 220 mm︱saw band length 2450 x 27 x 0,9 mm︱table height 915 mm︱band speed 35 + 70 m/min︱connected load frequency 400 V︱capacity 90 degrees: round 220 mm︱capacity 90 degrees: square 210 x 210 mm︱capacity 90 degrees: flat 230 x 185 mm︱total power requirement 1,2 kW︱weight of the machine ca. 240 kg︱dimensions of the machine ca. 870 x 1550 x 1740 mm︱

---

The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

cutting diameter 255 mm︱saw band length 2765x 0,9 x 27 mm︱cutting width 300 x 180 mm︱turning speeds 35 + 70 U/min︱total power requirement 1,8 kW︱weight of the machine ca. 450 t︱dimensions of the machine ca. 1,7 x 1,23 x 1,75 m︱

---

SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350 x 200 ︱saw band length 3375 x 27 x 0,9 mm︱band speed 37 + 74 m/min︱table height 940 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,61 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱

---

Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

cutting diameter 185 mm︱saw band length 2.085 x 20 x 0,90 mm︱table height 915 mm︱band speed 35/70 m/min︱capacity 90 degrees: round 185 mm︱capacity 90 degrees: square 150 mm︱capacity 90 degrees: flat 220 x 150 mm︱connected load frequency 400 V︱total power requirement 0,8 kW︱weight of the machine ca. 195 kg︱dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm︱

---

Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet

capacity 90 degrees: round 350 mm︱capacity 90 degrees: square 330 mm︱ 500 x 310 ︱band speed 15 - 100 m/min︱table height 844 mm︱dimensions of saw-band 4250 x 34 x 1,1 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 1,4 x 2,4 x 1,935 m︱

---

ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

capacity 90 degrees: round 350 mm︱capacity 90 degrees: square 330 mm︱ 450x320 ︱saw band length 4250x34x1,1 mm︱band speed 40 + 80 m/min︱table height 845 mm︱saw band width 34 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,985 t︱dimensions of the machine ca. 1,4 x 2,0 x 2,2 m︱

---

Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

capacity 90 degrees: round 510 mm︱capacity 90 degrees: square 450 mm︱ 650x450 ︱band speed 15 - 100 m/min︱table height 844 mm︱dimensions of saw-band 5320 x 34 x 1,1 mm︱total power requirement 3,0 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 1,9 x 2,87 x 1,3 m︱

---

PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

capacity 90 degrees: round 255 mm︱capacity 90 degrees: square 240 mm︱ 300 x 180 ︱saw band length 2.765 x 27 x 0,9 mm mm︱table height 950 mm︱band speed 18 - 110 m/min︱total power requirement 1,5 kW︱weight of the machine ca. 0,42 t︱dimensions of the machine ca. 1,23 x 1,7 x 1,75 m︱

---

SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350 x 200 ︱saw band length 3375 x 27 x 0,9 mm︱band speed 18 - 110 m/min︱table height 940 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,61 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱

---

Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

capacity 90 degrees: round 255 mm︱capacity 90 degrees: square 240 mm︱ 300 x 180 ︱saw band length 2.765 x 27 x 0,9 mm mm︱table height 950 mm︱band speed 35 + 70 m/min︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,42 t︱dimensions of the machine ca. 1,23 x 1,7 x 1,75 m︱

---

SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling

capacity 90 degrees: round 500 mm︱capacity 90 degrees: square 420 mm︱ 600x400 ︱saw band length 5320x34x1,1 mm︱band speed 15 - 100 m/min︱table height 805 mm︱total power requirement 3,0 kW︱weight of the machine ca. 1,45 t︱dimensions of the machine ca. 1,72 x 2,5 x 2,5 m︱

---

Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

capacity 90 degrees: round 255 mm︱capacity 90 degrees: square 240 mm︱ 300 x 180 ︱saw band length 2.765 x 27 x 0,9 mm mm︱table height 950 mm︱band speed 18 - 110 m/min︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,42 t︱

---

Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350x200 ︱saw band length 3375x27x0,9 mm︱band speed 18 - 100 m/min︱table height 940 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,65 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱

---

SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

capacity 90 degrees: round 305 mm︱capacity 90 degrees: square 260 mm︱ 350x200 ︱saw band length 3375x27x0,9 mm︱band speed 37 + 74 m/min︱table height 940 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,65 t︱dimensions of the machine ca. 1,5 x 1,75 x 1,9 m︱

---

SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱turning speed range: 36 / 72 m/min︱dimensions of saw-band 2950 x 25,4 x 0,9 mm︱weight of the machine ca. 0,4 t︱Dimensions (LxWxH) 1,5 x 0,9 x 1,5 ︱

---

Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

capacity 90 degrees: round 230 mm︱capacity 90 degrees: square 230 mm︱ 280 x 150 ︱band speed 35/70 m/min︱saw band length 2770 x 27 x 0,9 mm︱total power requirement 1,5/1,8 kW︱weight of the machine ca. 0,37 kg︱Dimensions (LxWxH) 1,5 x 1,2 x 1,3 0︱

---

Double miter band saws - Semi-automatic - Miter 45° / 60° with new engine and gearbox Completely overhauled!

cutting diameter 185 mm︱saw band length 2.080 x 20 x 0,90 mm︱cutting width 100x185 mm︱connected load frequency 230 V︱band speed 35 und 70 stufenlos m/min︱mitre joint 90° (angle-iron till) 60 °︱total power requirement 2,35 KW︱weight of the machine ca. 195 kg︱dimensions of the machine ca. 1280 x 550 x 1480 mm︱

---

We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw arm remains in the desired position. * Metal band saw with stepless electronic speed regulation and automatic lowering * Selector switch for hydraulically controlled or manual belt arm lowering * Saw arm can be swiveled up to 60 ° to the right * Quick release vice * Tape guide with 8 ball bearings * Hydraulic saw band tensioning with tensioning pressure display and cut off of the band breakage * including coolant device * including machine base cabinet The Z185 / R has the following standard equipment: - hydraulic cylinders - emulsion pump - eccentric clamp - underframe - saw band The machine is fully assembled and delivered immediately ready for use Technical specifications: Motor power: 230 V / 2.35 kW Cutting speed: 30 - 75 m / min. stepless Saw band dimensions: 2.085 x 20x 0.9 mm Footprint: 550 x 1,280 x 1,480 mm Working height: 915 mm Weight: 190 kg

cutting diameter - mm︱saw band length - mm︱cutting width - mm︱capacity 450 mm︱dimensions of the machine ca. 2.700 x 1.100 x 1.000 m︱

---

Brand Pehaka Type ROB 400 Horizontal Fully automatic Capacity 450 mm Hydraulic lowering Machine size (lxwxh) 2.700 x 1.100 x 1.000 mm