'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Crank Press - Double Column

          Machinelist: Crank Press - Double Column


          Crank Press - Double Column

          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173051 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱distance between columns 3640 mm︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱ram surface 3600 x 2500 mm︱ram adjustment 400 mm︱band width 2000 mm︱material thickness 0,6 - 2,5 mm︱material cross-cut 1600 x 2,5 mm²︱coil weight 35,0 t︱Number of Straightening rolls 13 0︱straightening roll diameter 50 mm︱
          Blanking / Cutting Line consisting of: - mechanical double column press make Schuler type EBS 4-600, yom 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking - moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available
            pressure 600 t
            distance between columns 3640 mm
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            band width 2000 mm
            material thickness 0,6 - 2,5 mm
            material cross-cut 1600 x 2,5 mm²
            coil weight 35,0 t
            Number of Straightening rolls 13 0
            straightening roll diameter 50 mm
            Description :
            Blanking / Cutting Line consisting of:
            - mechanical double column press make Schuler type EBS 4-600, yom 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            - moving tables (2x) without rails for the moving tables
            - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll
            - coil lifting device
            - extractor device make Schleicher
            - shear
            - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls
            - coil loop bridge
            - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994
            - blank stacker NSM-Magnettechnik
            stored in dismantled condition - Video before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-174004 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱distance between columns 3640 mm︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱hole in the table mm︱die cushion capacity t︱die cushion stroke mm︱table height over floor mm︱ram surface 3600 x 2500 mm︱pressure of ram t︱stroke of drawing ram mm︱ram adjustment 400 mm︱material width mm︱material thickness mm︱material cross-cut mm²︱feed length mm︱power requirement kW︱
          year of manufacture: 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables
            pressure 600 t
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            distance between columns 3640 mm
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            Description :
            year of manufacture: 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            moving tables (2x) without rails for the moving tables


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column BRET 2 PACK 25 B


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163020 · Crank Press - Double Column

          BRET - 2 PACK 25 B - - 1994 - Siemens S 5

          Technical details
          pressure 250 t︱distance between columns 1650 / 1400 mm︱stroke fix 150 mm︱no. of strokes 30 - 75 Hub/min︱dayligth (stroke and adjustment up) 665 mm︱column travel -side 550 mm︱table surface area 1600 x 900 mm︱hole in the table 1000 x 300 mm︱table height over floor 980 mm︱ram surface 1400 x 900 mm︱power requirement 42,0 kW︱weight of the machine ca. 33,00 t︱required space 2,8 x 2,5 x 4,4 m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8) distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 250 t
            distance between columns 1650 / 1400 mm
            stroke fix 150 mm
            no. of strokes 30 - 75 Hub/min
            dayligth (stroke and adjustment . 665 mm
            column travel -side 550 mm
            table surface area 1600 x 900 mm
            hole in the table 1000 x 300 mm
            table height over floor 980 mm
            ram surface 1400 x 900 mm
            power requirement 42,0 kW
            weight of the machine ca. 33,00 t
            required space 2,8 x 2,5 x 4,4 m
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8)
            distance table - ram without tool changing system approx. 765 mm
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN HU 2-500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173001 · Crank Press - Double Column

          WEINGARTEN - HU 2-500 - - 1985 - keine / Option neu

          Technical details
          pressure 500 t︱distance between columns 3100 mm︱stroke fix 300 mm︱no. of strokes 20 - 70 Hub/min︱dayligth (stroke and adjustment up) 1000 mm︱column travel -side 1400 mm︱table surface area 2800 x 1600 mm︱hole in the table mm︱table height over floor mm︱ram surface 2800 x 1450 mm︱power requirement 90,0 kW︱weight of the machine ca. 100,00 t︱required space 5,75 x 3,2 x 7,8 m︱ram adjustment 100 mm︱height over floor 6,4 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F
            pressure 500 t
            distance between columns 3100 mm
            stroke fix 300 mm
            no. of strokes 20 - 70 Hub/min
            dayligth (stroke and adjustment . 1000 mm
            column travel -side 1400 mm
            table surface area 2800 x 1600 mm
            ram surface 2800 x 1450 mm
            power requirement 90,0 kW
            weight of the machine ca. 100,00 t
            required space 5,75 x 3,2 x 7,8 m
            ram adjustment 100 mm
            height over floor 6,4 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column HAULICK RVD 160-1250 R


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-093056 · Crank Press - Double Column

          HAULICK - RVD 160-1250 R - - 1983 - konventionell

          Technical details
          pressure 160 t︱stroke fix 160 mm︱no. of strokes 30 - 120 /min︱distance between columns 1190 mm︱dayligth (stroke and adjustment up) 735 mm︱column travel -side 600 mm︱table surface area 1200 x 1000 mm︱hole in the table 500 x 300 mm︱table height over floor 900 mm︱ram surface 1000 x 800 mm︱ram adjustment 125 mm︱material width 550 mm︱material thickness 0 - 6,0 mm︱material cross-cut 1100 mm²︱feed length 350 mm︱power requirement 45,0 kW︱Weight 25,0 t︱dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90) can only be offered without putting into operation
            pressure 160 t
            stroke fix 160 mm
            no. of strokes 30 - 120 /min
            distance between columns 1190 mm
            dayligth (stroke and adjustment . 735 mm
            column travel -side 600 mm
            table surface area 1200 x 1000 mm
            hole in the table 500 x 300 mm
            table height over floor 900 mm
            ram surface 1000 x 800 mm
            ram adjustment 125 mm
            material width 550 mm
            material thickness 0 - 6,0 mm
            material cross-cut 1100 mm²
            feed length 350 mm
            power requirement 45,0 kW
            Weight 25,0 t
            dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90)
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES VE 100/100


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073112 · Crank Press - Double Column

          DREES - VE 100/100 - - 1980 - konventionell

          Technical details
          pressure 100 t︱stroke 20 - 200 mm︱no. of strokes 20 - 60 /min︱distance between columns 1230 mm︱dayligth (stroke and adjustment up) 650 mm︱column travel -side 540 mm︱table surface area 1050 x 750 mm︱table height over floor 760 mm︱ram surface 1000 x 750 mm︱ram adjustment 100 mm︱power requirement 18,0 kW︱Weight 20,5 t︱dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 100 t
            stroke 20 - 200 mm
            no. of strokes 20 - 60 /min
            distance between columns 1230 mm
            dayligth (stroke and adjustment . 650 mm
            column travel -side 540 mm
            table surface area 1050 x 750 mm
            table height over floor 760 mm
            ram surface 1000 x 750 mm
            ram adjustment 100 mm
            power requirement 18,0 kW
            Weight 20,5 t
            dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN VK 500.34.85


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113100 · Crank Press - Double Column

          WEINGARTEN - VK 500.34.85 - - 1974 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱ram adjustment 350 mm︱height over floor 8,3 mm︱height under floor 6,0 mm︱
          with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device stored in dismantled condition can only be offered without putting into operation
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            ram adjustment 350 mm
            height over floor 8,3 mm
            height under floor 6,0 mm
            Description :
            with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device
            stored in dismantled condition
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES ZE 500/160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083149 · Crank Press - Double Column

          DREES - ZE 500/160 - - 1973 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱
          with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            Description :
            with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column RICHTER STZZRR 160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083144 · Crank Press - Double Column

          RICHTER - STZZRR 160 - - 1965 - konventionell

          Technical details
          pressure 160 t︱stroke 15 - 170 mm︱no. of strokes 15 - 40 /min︱distance between columns 2050 / 1900 mm︱dayligth (stroke and adjustment up) 690 mm︱column travel -side 800 mm︱table surface area 1600 x 800 mm︱hole in the table mm︱table height over floor 900 mm︱ram surface 1620 x 700 mm︱ram adjustment 140 mm︱power requirement 15,0 kW︱Weight 24,0 t︱dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm︱total height over floor 4,8 m︱height under floor 0,5 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation
            pressure 160 t
            stroke 15 - 170 mm
            no. of strokes 15 - 40 /min
            distance between columns 2050 / 1900 mm
            dayligth (stroke and adjustment . 690 mm
            column travel -side 800 mm
            table surface area 1600 x 800 mm
            table height over floor 900 mm
            ram surface 1620 x 700 mm
            ram adjustment 140 mm
            power requirement 15,0 kW
            Weight 24,0 t
            dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm
            total height over floor 4,8 m
            height under floor 0,5 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          double-sided high speed press

          used Presses double-sided high speed press SIMPAC MC2 - 600


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S2535 · double-sided high speed press

          SIMPAC - MC2 - 600 - - 2011 - Simpac

          Technical details
          pressure 600 t︱stroke 300 mm︱no. of strokes 20 - 35 Hub/min︱hole in the table 1500 x 600 mm︱table-size 3000 x 1400 mm︱ram adjustment 0 - 120 mm︱number of connecting rods 2 Stück︱table surface area 3000 x 1400 mm︱dimension of ram 3000 x 1300 mm︱control Simpac ︱total power requirement 36 KVA︱weight of the machine ca. 105 t︱required space 10 x 2 x 5 m m︱
            pressure 600 t
            stroke 300 mm
            no. of strokes 20 - 35 Hub/min
            hole in the table 1500 x 600 mm
            table-size 3000 x 1400 mm
            ram adjustment 0 - 120 mm
            number of connecting rods 2 Stück
            table surface area 3000 x 1400 mm
            dimension of ram 3000 x 1300 mm
            control Simpac
            total power requirement 36 KVA
            weight of the machine ca. 105 t
            required space 10 x 2 x 5 m m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press HELMERDING KDH315/2100/2


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15695 · double-sided high speed press

          HELMERDING - KDH315/2100/2 - - 2008 -

          Technical details
          pressure 315 t︱stroke 40-200 mm︱no. of strokes 20-100 Hub/min︱ram - range of adjustment 120 mm︱ram surface 2000x1100 mm︱table surface area 2000x1200 mm︱hole in the table 1700x250 mm︱ 500 mm︱column travel -side 820x650 mm︱total power requirement 45 kW︱weight of the machine ca. 44 t︱
            pressure 315 t
            stroke 40-200 mm
            no. of strokes 20-100 Hub/min
            ram - range of adjustment 120 mm
            ram surface 2000x1100 mm
            table surface area 2000x1200 mm
            hole in the table 1700x250 mm
            500 mm
            column travel -side 820x650 mm
            total power requirement 45 kW
            weight of the machine ca. 44 t


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press BRUDERER BSTA 80 B


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233014A · double-sided high speed press

          BRUDERER - BSTA 80 B - - 2004 - Bruderer Typ B (Industrie-PC m

          Technical details
          pressure 80 t︱stroke 16 - 63 mm︱no. of strokes 100 - 750 /min︱distance between columns 970 mm︱dayligth (stroke and adjustment up) 380 mm︱column travel -side 380 mm︱table surface area 940 x 910 mm︱hole in the table 770 x 190 mm︱table height over floor 1180 mm︱ram surface 940 x 510 mm︱ram adjustment 76 mm︱material width 203 mm︱material thickness - 6,0 mm︱feed length 0 - 120 mm︱power requirement 37,0 kW︱Weight 14,50 t︱dimensions of the machine ca. 2,7 x 1,7 x 3,6 m︱
          permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800 A noise enclosure can be offered optionally - price on request
            pressure 80 t
            stroke 16 - 63 mm
            no. of strokes 100 - 750 /min
            distance between columns 970 mm
            dayligth (stroke and adjustment . 380 mm
            column travel -side 380 mm
            table surface area 940 x 910 mm
            hole in the table 770 x 190 mm
            table height over floor 1180 mm
            ram surface 940 x 510 mm
            ram adjustment 76 mm
            material width 203 mm
            material thickness - 6,0 mm
            feed length 0 - 120 mm
            power requirement 37,0 kW
            Weight 14,50 t
            dimensions of the machine ca. 2,7 x 1,7 x 3,6 m
            Description :
            permitted for automatic mode according to the CE-Norm
            with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication
            mechanical roll feed Bruderer BBV 205/120
            with drive via main shaft / pivot shaft of the press
            consoles Guethle CK 01/0800

            A noise enclosure can be offered optionally - price on request


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press PME ZH 1600 / 1500 Optimotion


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0447 · double-sided high speed press

          PME - ZH 1600 / 1500 Optimotion - - 2004 -

          Technical details
          Press capacity 160 t︱Slide adjustment 100 mm︱Daylight 560 mm︱Table surface area 1500 x 800 mm︱Number of strokes 20 - 60 min-1︱Height over floor approx. 3550 mm︱Weight of machine approx. 26 t︱
          1 x new Ortlinghaus brake/clutch combination1 x new Ortlinghaus rotary guide2 x new balancing cylinders1 x new bearing and seals on the flywheelincluding labour and 12 months warranty from date of installation on the new parts
            Press capacity 160 t
            Slide adjustment 100 mm
            Daylight 560 mm
            Table surface area 1500 x 800 mm
            Number of strokes 20 - 60 min-1
            Height over floor approx. 3550 mm
            Weight of machine approx. 26 t
            Description :
            1 x new Ortlinghaus brake/clutch combination1 x new Ortlinghaus rotary guide2 x new balancing cylinders1 x new bearing and seals on the flywheelincluding labour and 12 months warranty from date of installation on the new parts


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press KAISER KSTU 1000 - 20 - 4 P


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0187 · double-sided high speed press

          KAISER - KSTU 1000 - 20 - 4 P - - 2001 -

          Technical details
          Press capacity 100 t︱Slide adjustment 125 mm︱Shut height (stroke down, adjustment up) 600 mm︱Free frontal opening L-R 2.020 mm︱Free lateral opening F-B 620 mm︱Table surface area 2.000 x 1.000 mm︱Hole in table 1.700 x 300 mm︱Number of strokes 10 - 50 min-1︱Height over floor approx. 4.400 mm︱Dimensions L x W x H 5.166 x 2.500 x 4.400 mm︱Weight of machine approx. 38 t︱
            Press capacity 100 t
            Slide adjustment 125 mm
            Shut height (stroke down, adjust. 600 mm
            Free frontal opening L-R 2.020 mm
            Free lateral opening F-B 620 mm
            Table surface area 2.000 x 1.000 mm
            Hole in table 1.700 x 300 mm
            Number of strokes 10 - 50 min-1
            Height over floor approx. 4.400 mm
            Dimensions L x W x H 5.166 x 2.500 x 4.400 mm
            Weight of machine approx. 38 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press PME ZH 2500 / 1600


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0448 · double-sided high speed press

          PME - ZH 2500 / 1600 - - 1999 -

          Technical details
          Press capacity 250 t︱Slide adjustment 140 mm︱Daylight 560 mm︱Table surface area 1600 x 1000 mm︱Number of strokes 20 - 75 min-1︱Free frontal opening L-R 1680 mm︱Dimensions L x W x H 2850 x 2880 x 4395 mm︱Weight of machine approx. 25 t︱
            Press capacity 250 t
            Slide adjustment 140 mm
            Daylight 560 mm
            Table surface area 1600 x 1000 mm
            Number of strokes 20 - 75 min-1
            Free frontal opening L-R 1680 mm
            Dimensions L x W x H 2850 x 2880 x 4395 mm
            Weight of machine approx. 25 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press HAULICK+ROOS RSH 630-1000


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233045 · double-sided high speed press

          HAULICK+ROOS - RSH 630-1000 - - 1998 - Siemens S 7

          Technical details
          pressure 63 t︱stroke 4 - 60 mm︱no. of strokes 30 - 950 /min︱distance between columns 1050 mm︱dayligth (stroke and adjustment up) 530 mm︱column travel -side 310 mm︱table surface area 1000 x 730 mm︱hole in the table 910 x 140 mm︱table height over floor mm︱ram surface 900 x 450 mm︱ram adjustment 60 mm︱material width 250 mm︱material thickness - 3,0 mm︱material cross-cut mm²︱feed length mm︱power requirement 30,0 kW︱Weight 9,5 t︱dimensions of the machine ca. mxmxm︱height over floor m︱height under floor m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) Für Automatikbetrieb zugelassen gemäß den deutschen Unfallverhütungsvorschriften (UVV) with infinitely variable drive, 2 connecting rods, pneumatic clutch-brake combination, semi- automatic stroke adjustment, motoric ram adjustment, screen control, circular oil lubrication Servo roll feed make VAMCO type SR 250 on the left electrical control (Siemens S 7), main drive (Siemens), servo roll feed (Vamco)completely renewed in 2012
            pressure 63 t
            stroke 4 - 60 mm
            no. of strokes 30 - 950 /min
            distance between columns 1050 mm
            dayligth (stroke and adjustment . 530 mm
            column travel -side 310 mm
            table surface area 1000 x 730 mm
            hole in the table 910 x 140 mm
            ram surface 900 x 450 mm
            ram adjustment 60 mm
            material width 250 mm
            material thickness - 3,0 mm
            power requirement 30,0 kW
            Weight 9,5 t
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            Für Automatikbetrieb zugelassen gemäß den deutschen Unfallverhütungsvorschriften (UVV)
            with infinitely variable drive, 2 connecting rods, pneumatic clutch-brake combination, semi- automatic stroke adjustment, motoric ram adjustment, screen control, circular oil lubrication
            Servo roll feed make VAMCO type SR 250 on the left
            electrical control (Siemens S 7), main drive (Siemens), servo roll feed (Vamco)completely renewed in 2012


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press KAISER KSTU 1600 – 12,5-3PSR


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233024A · double-sided high speed press

          KAISER - KSTU 1600 – 12,5-3PSR - - 1998 - Siemens S 5

          Technical details
          pressure 160 t︱stroke 30 - 90 mm︱no. of strokes 50 - 300 /min︱distance between columns 1270 mm︱dayligth (stroke and adjustment up) 590 mm︱column travel -side 440 mm︱table surface area 1250 x 900 mm︱hole in the table 950 x 300 mm︱table height over floor mm︱ram surface 1250 x 800 mm︱ram adjustment 100 mm︱material width 200 mm︱material thickness - 6,0 mm︱feed length 0 - 120 mm︱power requirement 64,5 kW︱Weight 21,00 t︱dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm︱
          permitted for automatic mode according to the CE-Norm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800
            pressure 160 t
            stroke 30 - 90 mm
            no. of strokes 50 - 300 /min
            distance between columns 1270 mm
            dayligth (stroke and adjustment . 590 mm
            column travel -side 440 mm
            table surface area 1250 x 900 mm
            hole in the table 950 x 300 mm
            ram surface 1250 x 800 mm
            ram adjustment 100 mm
            material width 200 mm
            material thickness - 6,0 mm
            feed length 0 - 120 mm
            power requirement 64,5 kW
            Weight 21,00 t
            dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm
            Description :
            permitted for automatic mode according to the CE-Norm
            with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication
            mechanical roll feed Bruderer BBV 205/120
            with drive via main shaft / pivot shaft of the press
            consoles Guethle CK 01/0800


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press BRUDERER BSTA 50 USL


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0449 · double-sided high speed press

          BRUDERER - BSTA 50 USL - - 1998 -

          Technical details
          Press capacity 50 t︱Slide adjustment 64 mm︱Free frontal opening L-R 1100 mm︱Free lateral opening F-B 250 mm︱Table surface area 1080 x 650 mm︱Hole in table 1060 x 200 mm︱Number of strokes 100 - 750 min-1︱Height over floor approx. 2471 x 1278 x 3150 mm︱Weight of machine approx. 9 t︱
            Press capacity 50 t
            Slide adjustment 64 mm
            Free frontal opening L-R 1100 mm
            Free lateral opening F-B 250 mm
            Table surface area 1080 x 650 mm
            Hole in table 1060 x 200 mm
            Number of strokes 100 - 750 min-1
            Height over floor approx. 2471 x 1278 x 3150 mm
            Weight of machine approx. 9 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press HENSEL EBU HK 130/1600 P2


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-193013 · double-sided high speed press

          HENSEL - EBU HK 130/1600 P2 - - 1997 - Siemens S7-1500 F (neu)

          Technical details
          pressure 130 t︱distance between columns 1600 mm︱stroke 8 - 140 mm︱no. of strokes 50 - 200 Hub/min︱dayligth (stroke and adjustment up) 520 mm︱column travel -side 610 mm︱table surface area 1600 x 880 mm︱hole in the table 1000 x 350 mm︱table height over floor 950 mm︱ram surface 1600 x 880 mm︱power requirement 24,2 kW︱weight of the machine ca. 28,00 t︱required space 4,3 x 2,2 x 3,8 m︱ram adjustment 100 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting press will be fitted with new control Siemens S 7-1500 F Video at seller's site before dismantling available
            pressure 130 t
            distance between columns 1600 mm
            stroke 8 - 140 mm
            no. of strokes 50 - 200 Hub/min
            dayligth (stroke and adjustment . 520 mm
            column travel -side 610 mm
            table surface area 1600 x 880 mm
            hole in the table 1000 x 350 mm
            table height over floor 950 mm
            ram surface 1600 x 880 mm
            power requirement 24,2 kW
            weight of the machine ca. 28,00 t
            required space 4,3 x 2,2 x 3,8 m
            ram adjustment 100 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting
            press will be fitted with new control Siemens S 7-1500 F
            Video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press KAISER V 315 WR 2740


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0085 · double-sided high speed press

          KAISER - V 315 WR 2740 - - 1997 -

          Technical details
          Pressure total 315 t︱Slide adjustment 100 mm︱Shut height (stroke down, adjustment up) 1.050 mm︱Free frontal opening L-R 2.740 mm︱Free lateral opening F-B 1.500 mm︱Table surface area 2.740 x 1.800 mm︱Number of strokes 10 - 60 min-1︱Working hours machine 77.341 h︱Height over floor approx. 5.500 mm︱Dimensions L x W x H 5.400 x 3.300 x 5.700 mm︱Weight of machine approx. 80 t︱Control Siemens S5
            Pressure total 315 t
            Slide adjustment 100 mm
            Shut height (stroke down, adjust. 1.050 mm
            Free frontal opening L-R 2.740 mm
            Free lateral opening F-B 1.500 mm
            Table surface area 2.740 x 1.800 mm
            Number of strokes 10 - 60 min-1
            Working hours machine 77.341 h
            Height over floor approx. 5.500 mm
            Dimensions L x W x H 5.400 x 3.300 x 5.700 mm
            Weight of machine approx. 80 t
            Control Siemens S5


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press KAISER KSTU 1250-12.5-3PR


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0350 · double-sided high speed press

          KAISER - KSTU 1250-12.5-3PR - - 1997 -

          Technical details
          Press capacity 125 t︱Slide adjustment 100 mm︱Shut height (stroke down, adjustment up) 450 mm︱Free frontal opening L-R 1.290 mm︱Free lateral opening F-B 450 mm︱Table surface area 1.250 x 800 mm︱Hole in table 1.050 x 260 mm︱Number of strokes 30 - 220 min-1︱Height over floor approx. 3.800 mm︱Dimensions L x W x H 3.500 x 2.200 x 3.800 mm︱Weight of machine approx. 21,5 t︱
          Stoke adjustment only in the range from 0 - 70 mm working
            Press capacity 125 t
            Slide adjustment 100 mm
            Shut height (stroke down, adjust. 450 mm
            Free frontal opening L-R 1.290 mm
            Free lateral opening F-B 450 mm
            Table surface area 1.250 x 800 mm
            Hole in table 1.050 x 260 mm
            Number of strokes 30 - 220 min-1
            Height over floor approx. 3.800 mm
            Dimensions L x W x H 3.500 x 2.200 x 3.800 mm
            Weight of machine approx. 21,5 t
            Description :
            Stoke adjustment only in the range from 0 - 70 mm working


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press HAULICK RVD 63 - 960 HS (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-203003 · double-sided high speed press

          HAULICK - RVD 63 - 960 HS (CE) - - 1996 - Siemens S 5

          Technical details
          pressure 63 t︱distance between columns 965 mm︱stroke 4 - 60 mm︱no. of strokes 30 - 800 Hub/min︱dayligth (stroke and adjustment up) 380 mm︱column travel -side 355 mm︱table surface area 960 x 640 mm︱hole in the table 850 x 140 mm︱table height over floor 1150 mm︱ram surface 960 x 460 mm︱power requirement 32,5 kW︱weight of the machine ca. 13,00 t︱required space 3,3 x 1,7 x 2,9 m︱ram adjustment 80 mm︱
          permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motoric ram adjustment, mechanical pincer feed type GF 160 can be offered without or with putting into operation in given condition
            pressure 63 t
            distance between columns 965 mm
            stroke 4 - 60 mm
            no. of strokes 30 - 800 Hub/min
            dayligth (stroke and adjustment . 380 mm
            column travel -side 355 mm
            table surface area 960 x 640 mm
            hole in the table 850 x 140 mm
            table height over floor 1150 mm
            ram surface 960 x 460 mm
            power requirement 32,5 kW
            weight of the machine ca. 13,00 t
            required space 3,3 x 1,7 x 2,9 m
            ram adjustment 80 mm
            Description :
            permitted for automatic mode according to the CE Regulations
            with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motoric ram adjustment, mechanical pincer feed type GF 160
            can be offered without or with putting into operation in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press HENSEL EBU HK 130 ZR


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-193012 · double-sided high speed press

          HENSEL - EBU HK 130 ZR - - 1996 - konventionell

          Technical details
          pressure 130 t︱distance between columns 1220/1070 mm︱stroke 22 - 96 mm︱no. of strokes 20 - 120 Hub/min︱dayligth (stroke and adjustment up) 518 mm︱column travel -side 600 mm︱table surface area 1220 x 880 mm︱hole in the table 450 x 250 mm︱table height over floor 950 mm︱ram surface 1180 x 800 mm︱power requirement 22,0 kW︱weight of the machine ca. 17,50 t︱required space 3,7 x 1,75 x 3,55 m︱ram adjustment 110 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting
            pressure 130 t
            distance between columns 1220/1070 mm
            stroke 22 - 96 mm
            no. of strokes 20 - 120 Hub/min
            dayligth (stroke and adjustment . 518 mm
            column travel -side 600 mm
            table surface area 1220 x 880 mm
            hole in the table 450 x 250 mm
            table height over floor 950 mm
            ram surface 1180 x 800 mm
            power requirement 22,0 kW
            weight of the machine ca. 17,50 t
            required space 3,7 x 1,75 x 3,55 m
            ram adjustment 110 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses double-sided high speed press HAULICK & ROOS RVD 125-910 NS


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15580 · double-sided high speed press

          HAULICK & ROOS - RVD 125-910 NS - - 1995 -

          Technical details
          pressure 125 t︱stroke 10-80 mm︱no. of strokes 240 Hub/min︱ram - range of adjustment 80 mm︱table surface area 850x600 mm︱ram surface 760x550 mm︱hole in the table 850x130 verstellbar mm︱table height 1100 mm︱tool hole in ram Ø 50 mm︱total power requirement kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. BxTxH: 3000x2000x3300 mm︱
            pressure 125 t
            stroke 10-80 mm
            no. of strokes 240 Hub/min
            ram - range of adjustment 80 mm
            table surface area 850x600 mm
            ram surface 760x550 mm
            hole in the table 850x130 verstellbar mm
            table height 1100 mm
            tool hole in ram Ø 50 mm
            weight of the machine ca. 13 t
            dimensions of the machine ca. BxTxH: 3000x2000x3300 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •