'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Crank Press - Double Column

          Machinelist: Crank Press - Double Column


          Crank Press - Double Column

          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173051 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱distance between columns 3640 mm︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱ram surface 3600 x 2500 mm︱ram adjustment 400 mm︱band width 2000 mm︱material thickness 0,6 - 2,5 mm︱material cross-cut 1600 x 2,5 mm²︱coil weight 35,0 t︱Number of Straightening rolls 13 0︱straightening roll diameter 50 mm︱
          Blanking / Cutting Line consisting of: - mechanical double column press make Schuler type EBS 4-600, yom 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking - moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available
            pressure 600 t
            distance between columns 3640 mm
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            band width 2000 mm
            material thickness 0,6 - 2,5 mm
            material cross-cut 1600 x 2,5 mm²
            coil weight 35,0 t
            Number of Straightening rolls 13 0
            straightening roll diameter 50 mm
            Description :
            Blanking / Cutting Line consisting of:
            - mechanical double column press make Schuler type EBS 4-600, yom 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            - moving tables (2x) without rails for the moving tables
            - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll
            - coil lifting device
            - extractor device make Schleicher
            - shear
            - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls
            - coil loop bridge
            - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994
            - blank stacker NSM-Magnettechnik
            stored in dismantled condition - Video before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-174004 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱distance between columns 3640 mm︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱hole in the table mm︱die cushion capacity t︱die cushion stroke mm︱table height over floor mm︱ram surface 3600 x 2500 mm︱pressure of ram t︱stroke of drawing ram mm︱ram adjustment 400 mm︱material width mm︱material thickness mm︱material cross-cut mm²︱feed length mm︱power requirement kW︱
          year of manufacture: 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables
            pressure 600 t
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            distance between columns 3640 mm
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            Description :
            year of manufacture: 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            moving tables (2x) without rails for the moving tables


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column BRET 2 PACK 25 B


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163020 · Crank Press - Double Column

          BRET - 2 PACK 25 B - - 1994 - Siemens S 5

          Technical details
          pressure 250 t︱distance between columns 1650 / 1400 mm︱stroke fix 150 mm︱no. of strokes 30 - 75 Hub/min︱dayligth (stroke and adjustment up) 665 mm︱column travel -side 550 mm︱table surface area 1600 x 900 mm︱hole in the table 1000 x 300 mm︱table height over floor 980 mm︱ram surface 1400 x 900 mm︱power requirement 42,0 kW︱weight of the machine ca. 33,00 t︱required space 2,8 x 2,5 x 4,4 m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8) distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 250 t
            distance between columns 1650 / 1400 mm
            stroke fix 150 mm
            no. of strokes 30 - 75 Hub/min
            dayligth (stroke and adjustment . 665 mm
            column travel -side 550 mm
            table surface area 1600 x 900 mm
            hole in the table 1000 x 300 mm
            table height over floor 980 mm
            ram surface 1400 x 900 mm
            power requirement 42,0 kW
            weight of the machine ca. 33,00 t
            required space 2,8 x 2,5 x 4,4 m
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8)
            distance table - ram without tool changing system approx. 765 mm
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN HU 2-500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173001 · Crank Press - Double Column

          WEINGARTEN - HU 2-500 - - 1985 - keine / Option neu

          Technical details
          pressure 500 t︱distance between columns 3100 mm︱stroke fix 300 mm︱no. of strokes 20 - 70 Hub/min︱dayligth (stroke and adjustment up) 1000 mm︱column travel -side 1400 mm︱table surface area 2800 x 1600 mm︱hole in the table mm︱table height over floor mm︱ram surface 2800 x 1450 mm︱power requirement 90,0 kW︱weight of the machine ca. 100,00 t︱required space 5,75 x 3,2 x 7,8 m︱ram adjustment 100 mm︱height over floor 6,4 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F
            pressure 500 t
            distance between columns 3100 mm
            stroke fix 300 mm
            no. of strokes 20 - 70 Hub/min
            dayligth (stroke and adjustment . 1000 mm
            column travel -side 1400 mm
            table surface area 2800 x 1600 mm
            ram surface 2800 x 1450 mm
            power requirement 90,0 kW
            weight of the machine ca. 100,00 t
            required space 5,75 x 3,2 x 7,8 m
            ram adjustment 100 mm
            height over floor 6,4 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column HAULICK RVD 160-1250 R


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-093056 · Crank Press - Double Column

          HAULICK - RVD 160-1250 R - - 1983 - konventionell

          Technical details
          pressure 160 t︱stroke fix 160 mm︱no. of strokes 30 - 120 /min︱distance between columns 1190 mm︱dayligth (stroke and adjustment up) 735 mm︱column travel -side 600 mm︱table surface area 1200 x 1000 mm︱hole in the table 500 x 300 mm︱table height over floor 900 mm︱ram surface 1000 x 800 mm︱ram adjustment 125 mm︱material width 550 mm︱material thickness 0 - 6,0 mm︱material cross-cut 1100 mm²︱feed length 350 mm︱power requirement 45,0 kW︱Weight 25,0 t︱dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90) can only be offered without putting into operation
            pressure 160 t
            stroke fix 160 mm
            no. of strokes 30 - 120 /min
            distance between columns 1190 mm
            dayligth (stroke and adjustment . 735 mm
            column travel -side 600 mm
            table surface area 1200 x 1000 mm
            hole in the table 500 x 300 mm
            table height over floor 900 mm
            ram surface 1000 x 800 mm
            ram adjustment 125 mm
            material width 550 mm
            material thickness 0 - 6,0 mm
            material cross-cut 1100 mm²
            feed length 350 mm
            power requirement 45,0 kW
            Weight 25,0 t
            dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90)
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES VE 100/100


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073112 · Crank Press - Double Column

          DREES - VE 100/100 - - 1980 - konventionell

          Technical details
          pressure 100 t︱stroke 20 - 200 mm︱no. of strokes 20 - 60 /min︱distance between columns 1230 mm︱dayligth (stroke and adjustment up) 650 mm︱column travel -side 540 mm︱table surface area 1050 x 750 mm︱table height over floor 760 mm︱ram surface 1000 x 750 mm︱ram adjustment 100 mm︱power requirement 18,0 kW︱Weight 20,5 t︱dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 100 t
            stroke 20 - 200 mm
            no. of strokes 20 - 60 /min
            distance between columns 1230 mm
            dayligth (stroke and adjustment . 650 mm
            column travel -side 540 mm
            table surface area 1050 x 750 mm
            table height over floor 760 mm
            ram surface 1000 x 750 mm
            ram adjustment 100 mm
            power requirement 18,0 kW
            Weight 20,5 t
            dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN VK 500.34.85


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113100 · Crank Press - Double Column

          WEINGARTEN - VK 500.34.85 - - 1974 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱ram adjustment 350 mm︱height over floor 8,3 mm︱height under floor 6,0 mm︱
          with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device stored in dismantled condition can only be offered without putting into operation
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            ram adjustment 350 mm
            height over floor 8,3 mm
            height under floor 6,0 mm
            Description :
            with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device
            stored in dismantled condition
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES ZE 500/160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083149 · Crank Press - Double Column

          DREES - ZE 500/160 - - 1973 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱
          with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            Description :
            with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column RICHTER STZZRR 160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083144 · Crank Press - Double Column

          RICHTER - STZZRR 160 - - 1965 - konventionell

          Technical details
          pressure 160 t︱stroke 15 - 170 mm︱no. of strokes 15 - 40 /min︱distance between columns 2050 / 1900 mm︱dayligth (stroke and adjustment up) 690 mm︱column travel -side 800 mm︱table surface area 1600 x 800 mm︱hole in the table mm︱table height over floor 900 mm︱ram surface 1620 x 700 mm︱ram adjustment 140 mm︱power requirement 15,0 kW︱Weight 24,0 t︱dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm︱total height over floor 4,8 m︱height under floor 0,5 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation
            pressure 160 t
            stroke 15 - 170 mm
            no. of strokes 15 - 40 /min
            distance between columns 2050 / 1900 mm
            dayligth (stroke and adjustment . 690 mm
            column travel -side 800 mm
            table surface area 1600 x 800 mm
            table height over floor 900 mm
            ram surface 1620 x 700 mm
            ram adjustment 140 mm
            power requirement 15,0 kW
            Weight 24,0 t
            dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm
            total height over floor 4,8 m
            height under floor 0,5 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Tryout Press - hydraulic

          used Presses Tryout Press - hydraulic PROFIPRESS 200T M/H-M/C2-1500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00609 · Tryout Press - hydraulic

          PROFIPRESS - 200T M/H-M/C2-1500 - - neu / new -

          Technical details
          pressure 200 t︱stroke 400 mm︱table surface area 1500 x 560 mm︱feed down 9,2 mm/sec︱feed up 12,3 mm/sec︱feed under pressure 2,7 mm/sec︱column daylight 1500 mm︱total power requirement 4 kW︱weight of the machine ca. 1,7 t︱dimensions of the machine ca. 2,3 x 0,9 x 2,1 m︱
          • moveable pressure cylinder, • extended version, • additional manual pump, • CE,
            pressure 200 t
            stroke 400 mm
            table surface area 1500 x 560 mm
            feed down 9,2 mm/sec
            feed up 12,3 mm/sec
            feed under pressure 2,7 mm/sec
            column daylight 1500 mm
            total power requirement 4 kW
            weight of the machine ca. 1,7 t
            dimensions of the machine ca. 2,3 x 0,9 x 2,1 m
            Description :
            • moveable pressure cylinder,
            • extended version,
            • additional manual pump,
            • CE,


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 160T M/H-M/C2 - 1500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00611 · Tryout Press - hydraulic

          PROFIPRESS - 160T M/H-M/C2 - 1500 - - neu / new -

          Technical details
          pressure 160 t︱stroke 400 mm︱table surface area 1500 x 560 mm︱feed down 9,2 mm/sec︱feed up 12,3 mm/sec︱feed under pressure 2,7 mm/sec︱column daylight 1500 mm︱total power requirement 4 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,3 x 0,9 x 2,1 m︱
          • movable cylinder, • extended version, • additionally with manual pump, • CE signed
            pressure 160 t
            stroke 400 mm
            table surface area 1500 x 560 mm
            feed down 9,2 mm/sec
            feed up 12,3 mm/sec
            feed under pressure 2,7 mm/sec
            column daylight 1500 mm
            total power requirement 4 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,3 x 0,9 x 2,1 m
            Description :
            • movable cylinder,
            • extended version,
            • additionally with manual pump,
            • CE signed


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 30M/H-2


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010023 · Tryout Press - hydraulic

          PROFIPRESS - 30M/H-2 - - neu -

          Technical details
          pressure 30 t︱stroke 400 mm︱table surface area 700 x 445 mm︱pressing speed 2,6 mm/sec︱feed speeds 9,9 mm/sec︱return speed 12,1 mm/sec︱total power requirement 1,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,4 x 0,75 x 2,1 m︱
          • Work shop press with hydraulic motor and manual pump, • fixed cylinder and 2 speeds,
            pressure 30 t
            stroke 400 mm
            table surface area 700 x 445 mm
            pressing speed 2,6 mm/sec
            feed speeds 9,9 mm/sec
            return speed 12,1 mm/sec
            total power requirement 1,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,4 x 0,75 x 2,1 m
            Description :
            • Work shop press with hydraulic motor and manual pump,
            • fixed cylinder and 2 speeds,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 15H


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00608 · Tryout Press - hydraulic

          PROFIPRESS - 15H - - neu -

          Technical details
          pressure 15 t︱stroke 150 mm︱table surface area 500 x 150 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,4 x 0,75 x 2,1 m︱
          • Work shop press with hydraulic motor and manual pump, • fixed cylinder and 2 speeds,
            pressure 15 t
            stroke 150 mm
            table surface area 500 x 150 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,4 x 0,75 x 2,1 m
            Description :
            • Work shop press with hydraulic motor and manual pump,
            • fixed cylinder and 2 speeds,


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 30H


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00617 · Tryout Press - hydraulic

          PROFIPRESS - 30H - - neu -

          Technical details
          pressure 30 t︱stroke 220 mm︱table surface area 560 x 230 mm︱total power requirement / kW︱weight of the machine ca. 0,21 t︱dimensions of the machine ca. 1 x 0,7 x 2 m︱
          • Work shop press with manual pump
            pressure 30 t
            stroke 220 mm
            table surface area 560 x 230 mm
            total power requirement / kW
            weight of the machine ca. 0,21 t
            dimensions of the machine ca. 1 x 0,7 x 2 m
            Description :
            • Work shop press with manual pump


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic PROFIPRESS 160TON M/H-M/C 1


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00612 · Tryout Press - hydraulic

          PROFIPRESS - 160TON M/H-M/C 1 - - neu -

          Technical details
          pressure 160 t︱stroke 400 mm︱table surface area 920 x 560 mm︱feed down 4,8 mm/sec︱feed up 6,4 mm/sec︱total power requirement 4 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,7 x 0,9 x 2,1 m︱
          • Pressure cylinder moveable • Reduction price by fixed cylinder: € 410,-, • Surcharge for 2 speeds: € 600,-
            pressure 160 t
            stroke 400 mm
            table surface area 920 x 560 mm
            feed down 4,8 mm/sec
            feed up 6,4 mm/sec
            total power requirement 4 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1,7 x 0,9 x 2,1 m
            Description :
            • Pressure cylinder moveable
            • Reduction price by fixed cylinder: € 410,-,
            • Surcharge for 2 speeds: € 600,-


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic METALLKRAFT WPP 20 BK


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370020 · Tryout Press - hydraulic

          METALLKRAFT - WPP 20 BK - - NEU -

          Technical details
          pressure 20 t︱stroke 160 mm︱table surface area 690 x 950 x 180 mm︱weight of the machine ca. 210 kg︱dimensions of the machine ca. 1010 x 650 x 1750 mm︱
            pressure 20 t
            stroke 160 mm
            table surface area 690 x 950 x 180 mm
            weight of the machine ca. 210 kg
            dimensions of the machine ca. 1010 x 650 x 1750 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 30


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030195 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 30 - - Neu -

          Technical details
          30 to︱stroke 400 mm︱column daylight 740 mm︱ 300 mm︱total power requirement 2,2 kW︱weight of the machine ca. 600 kg︱dimensions 1200x800x2100 mm︱
          Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark
            30 to
            stroke 400 mm
            column daylight 740 mm
            300 mm
            total power requirement 2,2 kW
            weight of the machine ca. 600 kg
            dimensions 1200x800x2100 mm
            Description :
            Further information:
            stable welded construction
            Printing cylinder adjustable
            Operation electrically via shift lever / manually via hand lever
            Pressure display by manometer
            Height of material supports adjustable by cylinder
            CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 80


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030078 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 80 - - Neu -

          Technical details
          pressure 80 t︱stroke 400 mm︱column daylight 920 mm︱Frame Width 300 mm︱total power requirement 3,0 kW︱tank capacity 31 l︱ 5,4 mm/s︱ 8,3 mm/s︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 1600x580x2550 mm︱
          Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark
            pressure 80 t
            stroke 400 mm
            column daylight 920 mm
            Frame Width 300 mm
            total power requirement 3,0 kW
            tank capacity 31 l
            5,4 mm/s
            8,3 mm/s
            weight of the machine ca. 850 kg
            dimensions of the machine ca. 1600x580x2550 mm
            Description :
            Domestic equipments:
            - Stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via lever / manual over hand lever
            - Pressure gauge via pressure gauge
            - Material supports per cylinder in the height adjustable
            - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 100


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030075 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 100 - - Neu -

          Technical details
          pressure 100 t︱stroke 400 mm︱table surface area 920 x 560 mm︱dayligth 900 mm︱distance between columns 300 mm︱total power requirement 4,0 kW︱weight of the machine ca. 1000 kg︱dimensions of the machine ca. 1700 x 900 x 2500 mm︱
          Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark
            pressure 100 t
            stroke 400 mm
            table surface area 920 x 560 mm
            dayligth 900 mm
            distance between columns 300 mm
            total power requirement 4,0 kW
            weight of the machine ca. 1000 kg
            dimensions of the machine ca. 1700 x 900 x 2500 mm
            Description :
            Domestic equipments:
            - Stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via selector lever / manually via hand lever
            - Pressure gauge via pressure gauge
            - Material requirements - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 60 T / M-2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370016 · Tryout Press - hydraulic

          RHTC - 60 T / M-2 - - NEU -

          Technical details
          pressure 60 t︱stroke 380 mm︱table surface area Arbeitsbreite 750 mm︱pressure 259 bar︱oil volume 38 dm³︱ajustment speed 2,87 mm/sec︱work speed 9,5 mm/sec︱return speed 12 mm/sec︱total power requirement 2,2 kW︱weight of the machine ca. 540 kg︱
          Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.
            pressure 60 t
            stroke 380 mm
            table surface area Arbeitsbreite 750 mm
            pressure 259 bar
            oil volume 38 dm³
            ajustment speed 2,87 mm/sec
            work speed 9,5 mm/sec
            return speed 12 mm/sec
            total power requirement 2,2 kW
            weight of the machine ca. 540 kg
            Description :
            Inner diameter of the cylinder [mm]: 170
            Piston rod diameter [mm]: 75
            Diameter piston crown [mm]: 100

            - Integrated pressure gauge
            - Pressure regulator
            - Hydraulic unit with 2 speeds
            - Working table adjustable in height
            - Joystick to move the piston up / down

            The 60 ton workshop press has a fixed cylinder and a
            height-adjustable work table (motorized). Equipped with
            Pressure regulation, manometer, 2 speeds and a joystick for the
            move the piston up and down. With this joystick you can use the piston precisely
            move, making this hydraulic press perfect for precision jobs
            suitable.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 120


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030079 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 120 - - Neu -

          Technical details
          pressure 120 t︱stroke 400 mm︱Frame Width 400 mm︱distance spindle /table max. 900 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1300 kg︱dimensions of the machine ca. 1620 x 900 x 2450 mm︱
            pressure 120 t
            stroke 400 mm
            Frame Width 400 mm
            distance spindle /table max. 900 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1300 kg
            dimensions of the machine ca. 1620 x 900 x 2450 mm
            Description :



        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 100 T / M/H-M/C-2


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370017 · Tryout Press - hydraulic

          RHTC - 100 T / M/H-M/C-2 - - NEU -

          Technical details
          pressure 100 t︱stroke 380 mm︱table surface area Arbeitsbreite 1100 mm︱pressure 258 bar︱oil volume 46 dm³︱ajustment speed 7,54 mm/sec︱work speed 2,47 mm/sec︱return speed 9,06 mm/sec︱total power requirement 2,2 kW︱weight of the machine ca. 970 kg︱
          Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.
            pressure 100 t
            stroke 380 mm
            table surface area Arbeitsbreite 1100 mm
            pressure 258 bar
            oil volume 46 dm³
            ajustment speed 7,54 mm/sec
            work speed 2,47 mm/sec
            return speed 9,06 mm/sec
            total power requirement 2,2 kW
            weight of the machine ca. 970 kg
            Description :
            Inner diameter of the cylinder [mm]: 220
            Piston rod diameter [mm]: 90
            Diameter piston crown [mm]: 120

            - Movable cylinder (left-right)
            - Integrated pressure gauge
            - Pressure regulator
            - Two-speed hydraulic unit
            - Working table adjustable in height
            - Joystick to move the piston up / down
            - Hand pump for precision work

            The 100 ton hydraulic press is equipped with a movable cylinder (left-
            right) and a height-adjustable work table. Over and beyond
            it has a pressure regulation, 2 speeds, a joystick and
            a hand pump for precision pressing.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic RHTC 200 ton M/H-M/C-2 D=1300


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2370019 · Tryout Press - hydraulic

          RHTC - 200 ton M/H-M/C-2 D=1300 - - NEU -

          Technical details
          pressure 200 t︱stroke 400 mm︱table surface area Arbeitsbreite 1300 mm︱pressure 243 bar︱oil volume 64 dm³︱ajustment speed 5,73 mm/sec︱work speed 1,84 mm/sec︱return speed 7,08 mm/sec︱total power requirement 3,0 kW︱weight of the machine ca. 1690 kg︱
          Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted.
            pressure 200 t
            stroke 400 mm
            table surface area Arbeitsbreite 1300 mm
            pressure 243 bar
            oil volume 64 dm³
            ajustment speed 5,73 mm/sec
            work speed 1,84 mm/sec
            return speed 7,08 mm/sec
            total power requirement 3,0 kW
            weight of the machine ca. 1690 kg
            Description :
            Inner diameter of the cylinder [mm]: 320
            Piston rod diameter [mm]: 140
            Diameter piston crown [mm]: 175

            - adjustable cylinder (left-right)
            - Integrated pressure gauge
            - Pressure regulator
            - Two-speed hydraulic unit
            - Working table adjustable in height
            - Joystick to move the piston up / down
            - Hand pump for precision work
            - with digital display

            This 200 ton hydraulic press is equipped with a movable cylinder (left-
            right), a height-adjustable work table, a pressure regulator, 2
            speeds, a joystick and a hand pump for precision pressing
            fitted.


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Tryout Press - hydraulic HIDROLIKSAN HD 160


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-7030139 · Tryout Press - hydraulic

          HIDROLIKSAN - HD 160 - - Neu -

          Technical details
          pressure 160 t︱stroke 400 mm︱Frame Width 350 mm︱column daylight 1.100 mm︱cylinder diameter 120 mm︱work height max. 900 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1.400 kg︱dimensions of the machine ca. 1800x1000x2550 mm︱
          Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark
            pressure 160 t
            stroke 400 mm
            Frame Width 350 mm
            column daylight 1.100 mm
            cylinder diameter 120 mm
            work height max. 900 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1.400 kg
            dimensions of the machine ca. 1800x1000x2550 mm
            Description :
            Accessories / equipment:
            - stable welded construction
            - Pressure cylinder laterally adjustable
            - Electric control via selector lever / manually via hand lever
            - Pressure gauge via pressure gauge
            - Material supports adjustable in height by cylinder
            - CE mark


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •