'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Transfer Press

          Machinelist: Transfer Press


          Transfer Press

          used Presses Transfer Press FAGOR TLE 4-1500


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18366 · Transfer Press

          FAGOR - TLE 4-1500 - - 2002 - Siemens S7

          Technical details

          - Siemens S7 Control - Complete double cassette blank feeder - 2 bolsters onto t-track - hydraulic clamping on slide - manual clamping on bolster - Servo Transfer 3-Axis - Blank feeder -De-Stacker: Max sheet dimensions: 1850 mm x 750 mm Max sheet dimensions: 500 mm x 200 mm Sheet thickness: 0.5 - 4.0 mm Max sheet weight: 30 kgs Max weight on de-stack table: 5000 kgs Max pack height w/out pallet: 500 mm Max de-stack speed: 20 spm (front) 18 spm (back)
            Description :
            - Siemens S7 Control
            - Complete double cassette blank feeder
            - 2 bolsters onto t-track
            - hydraulic clamping on slide
            - manual clamping on bolster
            - Servo Transfer 3-Axis
            - Blank feeder
            -De-Stacker:
            Max sheet dimensions: 1850 mm x 750 mm
            Max sheet dimensions: 500 mm x 200 mm
            Sheet thickness: 0.5 - 4.0 mm
            Max sheet weight: 30 kgs
            Max weight on de-stack table: 5000 kgs
            Max pack height w/out pallet: 500 mm
            Max de-stack speed: 20 spm (front) 18 spm (back)
          used Presses Transfer Press HITACHI ZOSEN K2 (2400 TR)


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18044 · Transfer Press

          HITACHI ZOSEN - K2 (2400 TR) - - 1996 -

          Technical details

          TRANSFER PRESS Capacity: • No.1 Slide spec 1600(1000/600)ton • No.2 Slide spec 800(400/400)ton • Die height: 1200mm • Slide adjustment: 200mm • Slide Stroke • No.1 Slide spec 900mm • No.2 Slide spec 800mm Bolster area • No.1 Slide spec 3600x2400mm • No.2 Slide spec 5400x2400mm Slide area • No.1 Slide spec 3600x2400mm • No.2 Slide spec 5400x2400mm • Stroke per/min: 8~18 SPM • TRANSFER • Feed stroke: 1800mm • Clamp stroke: 400mm • Lift stroke: 200mm • DIE CUSHION • Capacity: 200ton • Stroke: 300mm
            Description :
            TRANSFER PRESS
            Capacity:
            • No.1 Slide spec 1600(1000/600)ton
            • No.2 Slide spec 800(400/400)ton
            • Die height: 1200mm
            • Slide adjustment: 200mm
            • Slide Stroke
            • No.1 Slide spec 900mm
            • No.2 Slide spec 800mm
            Bolster area
            • No.1 Slide spec 3600x2400mm
            • No.2 Slide spec 5400x2400mm
            Slide area
            • No.1 Slide spec 3600x2400mm
            • No.2 Slide spec 5400x2400mm
            • Stroke per/min: 8~18 SPM

            • TRANSFER
            • Feed stroke: 1800mm
            • Clamp stroke: 400mm
            • Lift stroke: 200mm

            • DIE CUSHION
            • Capacity: 200ton
            • Stroke: 300mm

          used Presses Transfer Press HITACHIZOSEN K1 (3550 TR)


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18043 · Transfer Press

          HITACHIZOSEN - K1 (3550 TR) - - 1996 -

          Technical details

          • Blank Size: • Length(Feed Direction): 400(500)-1800mm • Width: 900-3200mm • Thickness: 0.45-2.3mm • Capacity: 2300+1200ton (15000/800, 600/600) • Die Height: 1250mm • Slide Adjustment: 200mm • Slide Stroke: 1000mm • Bolster Area: 4000x3600, 6100x3600mm • Slide Area: 4200x3600, 6300x3600mm • Clear distance: 4450, 6550mm • M/B Carriage Capacity: 50.57ton • Feed Level(From Bolster Top Face): 700mm(Feed Bar Top Face Height) • Slide Clamper Position: 300, 600mm (8 Sets) • Clamper Travelling Stroke: 1300(L-R)mm • Lift Stroke: 250mm • Feed Stroke: 2100mm • Clamp Stroke: 500mm • Feed Bar Inside Distance: 1800, 1900, 2100, 2400, 2700, 3000, 3300, 3600mm • Scrap Chute Direction: F-B & L-R Direction • Die Cushion Device: Stroke Locking 200ton Air Cushion 300mm • Line Production Speed: 8~16(5) SPM • Tri-axis transfer unit • Type of feed: Tri-axis feed (Clamp-Lift-Feed-Lower-Unclamp-return) • Type of drive: Cam mechanism driven by power take off shaft • Number of stamping stages: Five(5) • Feed stroke: 2100mm constant • Clamp stroke: 500mm constant(each side) • Lift stroke: 250mm constant • Feed bar inner distance(at clamp position) 3600, 3300, 3000, 2700, 2400, 2100, 1900, 1800mm (8 steps) • Feed bar height: 700mm constant(Feed bar top face to bolster top face at “Lower” position) • Feed direction: Left to right • Location of cam box: Exit side of the press • Sectional dimension of feed bar: Width 340mm x Height 240mm
            Description :

            • Blank Size:
            • Length(Feed Direction): 400(500)-1800mm
            • Width: 900-3200mm
            • Thickness: 0.45-2.3mm
            • Capacity: 2300+1200ton (15000/800, 600/600)
            • Die Height: 1250mm
            • Slide Adjustment: 200mm
            • Slide Stroke: 1000mm
            • Bolster Area: 4000x3600, 6100x3600mm
            • Slide Area: 4200x3600, 6300x3600mm
            • Clear distance: 4450, 6550mm
            • M/B Carriage Capacity: 50.57ton
            • Feed Level(From Bolster Top Face): 700mm(Feed Bar Top Face Height)
            • Slide Clamper Position: 300, 600mm (8 Sets)
            • Clamper Travelling Stroke: 1300(L-R)mm
            • Lift Stroke: 250mm
            • Feed Stroke: 2100mm
            • Clamp Stroke: 500mm
            • Feed Bar Inside Distance: 1800, 1900, 2100, 2400, 2700, 3000, 3300, 3600mm
            • Scrap Chute Direction: F-B & L-R Direction
            • Die Cushion Device: Stroke Locking 200ton Air Cushion 300mm
            • Line Production Speed: 8~16(5) SPM

            • Tri-axis transfer unit
            • Type of feed: Tri-axis feed (Clamp-Lift-Feed-Lower-Unclamp-return)
            • Type of drive: Cam mechanism driven by power take off shaft
            • Number of stamping stages: Five(5)
            • Feed stroke: 2100mm constant
            • Clamp stroke: 500mm constant(each side)
            • Lift stroke: 250mm constant
            • Feed bar inner distance(at clamp position) 3600, 3300, 3000, 2700, 2400,
            2100, 1900, 1800mm (8 steps)
            • Feed bar height: 700mm constant(Feed bar top face to bolster top face at
            “Lower” position)
            • Feed direction: Left to right
            • Location of cam box: Exit side of the press
            • Sectional dimension of feed bar: Width 340mm x Height 240mm

          used Presses Transfer Press KOMATSU E2T 800


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18552 · Transfer Press

          KOMATSU - E2T 800 - - 1990 -

          Technical details

          • Capacity:: 800 tons • Drive type: Top drive • Type of operation: Acentric drive • Number of points: Attaching 2 point Plunger guide • Number of strokes: 2D 12-25, 3D 12-20 • Stroke Length: 500mm • Die height (from top of Bolster to bottom of slide): 900mm • Slides Adjusted: 150mm • Slide size (left and right) 4800x1400mm • Bolster size: 4800x1400x300mm • Main motor: SCR90(kw) • Electrical: 400V • Station: 5 • Maximum depth: 2D 160mm, 3D 125mm
            Description :

            • Capacity:: 800 tons
            • Drive type: Top drive
            • Type of operation: Acentric drive
            • Number of points: Attaching 2 point Plunger guide
            • Number of strokes: 2D 12-25, 3D 12-20
            • Stroke Length: 500mm
            • Die height (from top of Bolster to bottom of slide): 900mm
            • Slides Adjusted: 150mm
            • Slide size (left and right) 4800x1400mm
            • Bolster size: 4800x1400x300mm
            • Main motor: SCR90(kw)
            • Electrical: 400V
            • Station: 5
            • Maximum depth: 2D 160mm, 3D 125mm

          used Presses Transfer Press KOMATSU E4S 1200.05,90-MF D


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18533 · Transfer Press

          KOMATSU - E4S 1200.05,90-MF D - - 1982 -

          Technical details

          • Capacity: 1200 tons • Maximum station capacity: 450 tons • Slide stroke: 600mm • Slide Adjustment: 150mm • Number of slide strokes: 5 • 2D 10 ~ 22s.p.m • 3D 10 ~ 22 s.p.m • Type Distance (Feed Stroke): 900mm • Day height (from top to top of ballstar): 1020mm • Feed Heat (from top of Ballstar) - 2 Dimensional: 495mm - 3 Dimensional: 500mm • Slide size (left and right x before and after): 4,800mm x 1,900mm • Ballstar size (left and right x front and back x thickness): 4,500mm x 1,700mm x 300mm • Height from floor to top of bolster: 730mm • Maximum Workload: - In the range of 10 ~ 15s.p.m: Max 20 t.m - From 16 to 22s.p.m range: Max 30 t,m • Spindle motor output: SCR Max 160kW • Product Lift Stroke (3D): 100mm • Cramp Stroke: 250mm • Transfer width: 900mm. 1,100 mm, 1,300 mm 1,500 mm, 1,700 mm • Die cushion device: - Type: Pneumatic - Capacity: First, station 80 tons, Station 2 to 5: 35 tons - Stroke (effective) Each station 250 mm • Part size (left and right x before and after): Each station 800mm x 1,420mm • Locking device: None
            Description :
            • Capacity: 1200 tons
            • Maximum station capacity: 450 tons
            • Slide stroke: 600mm
            • Slide Adjustment: 150mm
            • Number of slide strokes: 5
            • 2D 10 ~ 22s.p.m
            • 3D 10 ~ 22 s.p.m
            • Type Distance (Feed Stroke): 900mm
            • Day height (from top to top of ballstar): 1020mm
            • Feed Heat (from top of Ballstar)
            - 2 Dimensional: 495mm
            - 3 Dimensional: 500mm
            • Slide size (left and right x before and after): 4,800mm x 1,900mm
            • Ballstar size (left and right x front and back x thickness): 4,500mm x
            1,700mm x 300mm
            • Height from floor to top of bolster: 730mm
            • Maximum Workload:
            - In the range of 10 ~ 15s.p.m: Max 20 t.m
            - From 16 to 22s.p.m range: Max 30 t,m
            • Spindle motor output: SCR Max 160kW
            • Product Lift Stroke (3D): 100mm
            • Cramp Stroke: 250mm
            • Transfer width: 900mm. 1,100 mm, 1,300 mm 1,500 mm, 1,700 mm

            • Die cushion device:
            - Type: Pneumatic
            - Capacity: First, station 80 tons, Station 2 to 5: 35 tons
            - Stroke (effective) Each station 250 mm
            • Part size (left and right x before and after): Each station 800mm x 1,420mm
            • Locking device: None
          used Presses Transfer Press KOMATSU E4T 2500.07.70-MF-D


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19119 · Transfer Press

          KOMATSU - E4T 2500.07.70-MF-D - - 1990 -

          Technical details
          pressure 2500 t︱table length 5200 mm︱table width 2300 mm︱PRESS FORCES
          • CAPACITY : 2500ton • Point pressure capacity: • - Upper 1600t • - Down 900ton • Slide stroke: 650mm • Slide adjustment: 225mm • Slide stroke number: continue 9~25spm • Die-height: 1250mm • Slid size(LxR ,FxB): 5400x2400mm • Bolster size(LxR, FxB, T): 5200x2300x200mm • Balance capacity: 30ton • Main motor: DC 355kw • Feed back(bolster upper side): 700,780mm • Feed back stroke : 550,700,1000mm • Cramp stroke : 0-250mm • Lift stroke: 0~150mm • Transfer inner size(cramp): 650~2200mm • Die cushion capacity • No.1 station 120ton • No.2 station 80ton • No.3 station 60ton • No.5,6,7 station: 5ton • Stroke: 200mm • Bed size: 480x1780mm • Stop time: 430ms
            pressure 2500 t
            table length 5200 mm
            table width 2300 mm
            Description :
            • CAPACITY : 2500ton
            • Point pressure capacity:
            • - Upper 1600t
            • - Down 900ton
            • Slide stroke: 650mm
            • Slide adjustment: 225mm
            • Slide stroke number: continue 9~25spm
            • Die-height: 1250mm
            • Slid size(LxR ,FxB): 5400x2400mm
            • Bolster size(LxR, FxB, T): 5200x2300x200mm
            • Balance capacity: 30ton
            • Main motor: DC 355kw
            • Feed back(bolster upper side): 700,780mm
            • Feed back stroke : 550,700,1000mm
            • Cramp stroke : 0-250mm
            • Lift stroke: 0~150mm
            • Transfer inner size(cramp): 650~2200mm

            • Die cushion capacity
            • No.1 station 120ton
            • No.2 station 80ton
            • No.3 station 60ton
            • No.5,6,7 station: 5ton
            • Stroke: 200mm
            • Bed size: 480x1780mm
            • Stop time: 430ms

          used Presses Transfer Press KOMATSU LE8T3500.05.210-MF.D


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17868 · Transfer Press

          KOMATSU - LE8T3500.05.210-MF.D - - 1990 -

          Technical details

          Maximum capacity (Total) 3500 metric ton Upper stream capacity: 2300 metric ton Lower stream capacity: 1200 metric ton Slide stroke Upper stream Lower stream: 1000mm Die height: 1250mm (from bolster top face to slide bottom face) Slide adjustment: 200mm Number of slide strokes: 5&6~14spm Bolster dimensions (U-LO x R-L x Thickness) Upper stream bolster 4000 x 3600 x 300mm Lower stream bolster 6100 x 3600 x 300mm Slide dimensions (U-LO x R-L x Thickness) Upper stream slide 4200 x 3600mm Lower stream slide 6300 x 3600mm Balancer capacity Upper stream balancer 24 metric ton Lower stream balancer 36 metric ton Main motor output: DC. 280kw Working energy (at 10~14 spm) 90 t-m (at 6~9 spm) 55 t-m Bolster height 810mm (from floor to top face of bolster) Transfer feeder Feed height (from top face of bolster) 700mm Feed stroke (distance between dies) 2100mm Clamp stroke ( on each side) 500mm Lift stroke: 250mm Bar closed 1800, 1900, 2100, 2400, 2700, 3000. 3300. 3600mm Station: 5 Capacity of die cushion (Pneumatic type) 200 metric ton Stroke (effective) 300mm Pad dimensions (U-LO x R-L) 1700 x 3200mm Remark: Press type: Top Drive (Upper: Rink, Lower: Eccentric) Point of suspension: 8points Press Capacity (Ton): 3,500Ton (1,500/800/600/600) Slide Capacity: Upper: Max. 15000Ton / Lower: Max. 800Ton Station Capacity.(Allowable): W3: Max. 400Ton/ W4: Max. 400Ton/ W5: Max. 400Ton Slide stroke: Upper: 1,019mm/Lower: 1,000mm Max. Allowable weight of M/B: Upper: 50Ton/ Lower: 75Ton Upper Die weight (Balance Capacity.): Upper: 24Ton/ Lower:36Ton Die cushion Type: Pneumatic & Hydraulic Damper Capacity: Max. 200Ton Stroke: 300mm Locking device: Not equipped
            Description :

            Maximum capacity (Total) 3500 metric ton
            Upper stream capacity: 2300 metric ton
            Lower stream capacity: 1200 metric ton
            Slide stroke
            Upper stream
            Lower stream: 1000mm
            Die height: 1250mm (from bolster top face to slide bottom face)
            Slide adjustment: 200mm
            Number of slide strokes: 5&6~14spm
            Bolster dimensions (U-LO x R-L x Thickness)
            Upper stream bolster 4000 x 3600 x 300mm
            Lower stream bolster 6100 x 3600 x 300mm
            Slide dimensions (U-LO x R-L x Thickness)
            Upper stream slide 4200 x 3600mm
            Lower stream slide 6300 x 3600mm
            Balancer capacity
            Upper stream balancer 24 metric ton
            Lower stream balancer 36 metric ton
            Main motor output: DC. 280kw
            Working energy (at 10~14 spm) 90 t-m
            (at 6~9 spm) 55 t-m
            Bolster height 810mm (from floor to top face of bolster)

            Transfer feeder
            Feed height (from top face of bolster) 700mm
            Feed stroke (distance between dies) 2100mm
            Clamp stroke ( on each side) 500mm
            Lift stroke: 250mm
            Bar closed
            1800, 1900, 2100, 2400, 2700, 3000. 3300. 3600mm
            Station: 5

            Capacity of die cushion (Pneumatic type) 200 metric ton
            Stroke (effective) 300mm
            Pad dimensions (U-LO x R-L) 1700 x 3200mm

            Remark:
            Press type: Top Drive (Upper: Rink, Lower: Eccentric)
            Point of suspension: 8points
            Press Capacity (Ton): 3,500Ton (1,500/800/600/600)
            Slide Capacity: Upper: Max. 15000Ton / Lower: Max. 800Ton
            Station Capacity.(Allowable): W3: Max. 400Ton/ W4: Max. 400Ton/
            W5: Max. 400Ton
            Slide stroke: Upper: 1,019mm/Lower: 1,000mm
            Max. Allowable weight of M/B: Upper: 50Ton/ Lower: 75Ton
            Upper Die weight (Balance Capacity.): Upper: 24Ton/ Lower:36Ton
            Die cushion
            Type: Pneumatic & Hydraulic Damper
            Capacity: Max. 200Ton
            Stroke: 300mm
            Locking device: Not equipped

          used Presses Transfer Press MÜLLER ZE 400


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403328 · Transfer Press

          MÜLLER - ZE 400 - - 1992 -

          Technical details

          HYDRAULICALLY TRANSFER PRESS with tape arrangement Constr.: Müller-Weingarten Machine type: ZE 400 Year: 1992 Working hours Press: 31604 Working hours Coiling machine 26675 Control: CNC The press is combined with a Coiling machine constr. SCHLEICHER Press " ram force: 4.000 kN " back tension force 750 kN " ram dimension: 2.000 x 1.300 mm " installation height: max 1.000 mm " distance table/ram Upper stroke : 1.000 mm Lower stroke: 300 mm " die cushion Die cushion force: 1.600 kN Die cushion stroke: 200 mm " table size: 2.000 x 1.300 mm " ram stroke: 700 mm " table height above ground: 900 mm " total height above ground:: 5.700 mm " slowing-down time: 140 ms " security distance: 224 mm " control system press-: Müller PBS1 " installed wattage: 110 kW " Machine weight Press: 48 t " required space: 5,0 m x 3,5 m x 5,7 m -L x W x H " oil filling: ca. 2.100 ltr. Coiling machine " Coil-outer- Ø: max. 1.600 mm " Coil-inner- Ø: 500 - 600 mm " Coil-weight: 12,5 t " strip width: 200 - 1600 mm " strip thickness stainless stee up to 3 mm. " strip thickness steel: up to 4 mm " strip thickness Alu: up to 4 mm " control: Siemens S5 " required space: 10.5 m x 4.74 m x ca.3 m L x W x H Loop hole: 2.55 m x 2.1 m x 1.5 m L x W x H Additional information " The line is equipped with light barriers. " Equipment according to current Prevention of Accidents requirements. " Advance rollers can be lightened by springs, so the line can also treat Aluminium without any difficulties. Total weight. approx. 62 to. MORE PHOTOS ARE AVAILABLE UPON REQUEST.
            Description :
            HYDRAULICALLY TRANSFER PRESS with tape arrangement

            Constr.: Müller-Weingarten
            Machine type: ZE 400
            Year: 1992

            Working hours Press: 31604
            Working hours Coiling machine 26675
            Control: CNC

            The press is combined with a Coiling machine constr. SCHLEICHER

            Press

            " ram force: 4.000 kN
            " back tension force 750 kN
            " ram dimension: 2.000 x 1.300 mm
            " installation height: max 1.000 mm

            " distance table/ram
            Upper stroke : 1.000 mm
            Lower stroke: 300 mm

            " die cushion
            Die cushion force: 1.600 kN
            Die cushion stroke: 200 mm

            " table size: 2.000 x 1.300 mm
            " ram stroke: 700 mm
            " table height above ground: 900 mm
            " total height above ground:: 5.700 mm

            " slowing-down time: 140 ms
            " security distance: 224 mm
            " control system press-: Müller PBS1

            " installed wattage: 110 kW
            " Machine weight Press: 48 t
            " required space: 5,0 m x 3,5 m x 5,7 m -L x W x H
            " oil filling: ca. 2.100 ltr.

            Coiling machine

            " Coil-outer- Ø: max. 1.600 mm
            " Coil-inner- Ø: 500 - 600 mm
            " Coil-weight: 12,5 t
            " strip width: 200 - 1600 mm
            " strip thickness stainless stee up to 3 mm.
            " strip thickness steel: up to 4 mm
            " strip thickness Alu: up to 4 mm
            " control: Siemens S5

            " required space: 10.5 m x 4.74 m x ca.3 m L x W x H
            Loop hole: 2.55 m x 2.1 m x 1.5 m L x W x H

            Additional information

            " The line is equipped with light barriers.
            " Equipment according to current Prevention of Accidents requirements.
            " Advance rollers can be lightened by springs, so the line can also treat Aluminium
            without any difficulties.

            Total weight. approx. 62 to.

            MORE PHOTOS ARE AVAILABLE UPON REQUEST.
          used Presses Transfer Press ROVETTA S4-16000 /E / ET3


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18367 · Transfer Press

          ROVETTA - S4-16000 /E / ET3 - - 1997 - Siemens S5

          Technical details

          Siemens S5 Control Coil feed, 2 bolsters F-B onto t-track, hydraulic clamping on slide, manual clamping on bolster Coil Feed: - Coil Width: 475- 1800mm - Coil Thickness 0,6 - 3,2mm - Coil Weight : 10t - max Coil Outer Diameter: 1800mm
            Description :
            Siemens S5 Control
            Coil feed,
            2 bolsters F-B onto t-track,
            hydraulic clamping on slide,
            manual clamping on bolster

            Coil Feed:
            - Coil Width: 475- 1800mm
            - Coil Thickness 0,6 - 3,2mm
            - Coil Weight : 10t
            - max Coil Outer Diameter: 1800mm
          used Presses Transfer Press ROVETTA S4-18000 /LD /ET3


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18368 · Transfer Press

          ROVETTA - S4-18000 /LD /ET3 - - 1999 - Siemens S5 Control

          Technical details

          Siemens S5 Control Complete with coil feed 2 moving bolsters on t-track, hydraulic clamping on the slide, manual clamping on the bolster Coil Feed: - Coil Width: 475- 1800mm - Coil Thickness 0,6 - 3,2mm - Coil Weight : 10t - max Coil Outer Diameter: 1800mm
            Description :
            Siemens S5 Control
            Complete with coil feed
            2 moving bolsters on t-track,
            hydraulic clamping on the slide,
            manual clamping on the bolster


            Coil Feed:
            - Coil Width: 475- 1800mm
            - Coil Thickness 0,6 - 3,2mm
            - Coil Weight : 10t
            - max Coil Outer Diameter: 1800mm
          •   
          •   
          • 1  

            Профіль трейдера: Prodeq Trading
          ТОВ

          Зв'язатися з трейдером



            Торгівля Prodeq
          ТОВ

           Опора 1
            9527 - Нідерхельфеншвіль
            Швейцарія
            (0041) 71 - 948 7060 "> (0041) 71 - 948 7060
            (0041) 71 - 948 7069
            info@prodeq.ch
            www.prodeq.ch

          Профіль Трейдера

          Група ProdEq - Партнер промисловості.
          Оптова торгівля металообробним устаткуванням.
           
          Ми продаємо та купуємо:
          • верстати
          • машини для виготовлення металу
          • використовується промислове обладнання
          • повні рослини
          Міжнародність:
          наш мережа міжнародних продажів надає доступ до світових ринків використовуваних / уживаних машин.


          Інтернет-каталог обладнання:
          Пошук і пошук потрібного обладнання та верстата (ЧПУ або без ЧПУ) в нашому інтернет-каталозі. Всі машини для продажу публікуються з вичерпною інформацією.

          Великі проекти - невеликі проекти:
          Ми здійснюємо аукціони та ліквідації та здійснюємо продаж вашого додаткового обладнання. Будь ласка, зв'яжіться з нами при будь-якому майбутньому продажу додаткових активів. Ми торгуємо окремі машини а також комплектні промислові підприємства.

          Експертиза:
          Незалежно, якщо ви продаєте або купуєте вживані машини або обладнання. Базуйте своє рішення про продаж на нашій оцінці та вашому рішенні про покупку на нашій технічній консультації.

          Більш ніж уживані:
          Ми також торгуємо обраним портфелем компанії нове обладнання, просто запитайте нас.


          Торгівля та послуги:
          Попросіть післяпродажних послуг, таких як демонтаж, капітальний ремонт, транспортування, імпорт та експорт та фінансування

          Машини та обладнання:


          ProdEq Trading GmbH
          Холдинг 1, 9527 Niederhelfenschwil, Швейцарія


          ProdEq Maschinenhandel GmbH
          Unterdorf 34, 6532 Ладіс, Австрія


          ProdEq Deutschland GmbH
          Weberweg 2, 42499 Hückeswagen, Німеччина


          Post-Venta Carreras SA
          Pol. Els Plans d'Arau, C / Ніколау Коперніч 2, 08787 La Pobla de Claramunt, Іспанія


          Guerrieri srl
          Площа Джоусі Кардуччі 6, 21100 Varese (VA), Італія


          ProdEq doo Магазин з промисловими машинами
          Opekarniska 4, 2327 Race, Словенія


          Представництво ProdEq Maschinenhandel GmbH
          16110 Nilüfer / Bursa, Туреччина


          Інші представництва: Мексика, Іран
          Для отримання додаткової інформації зверніться до одного з вищезгаданих відділень ProdEq.




          TOP Manufacturer:

          KOMATSU -

          Prodeq Trading GmbH  9527 - Niederhelfenschwil Reckholder 1 Schweiz
          Prodeq Trading GmbH

          Reckholder 1



          Contact Trader


            Prodeq Trading GmbH
           Reckholder 1
            9527 - Niederhelfenschwil
            Schweiz
            (0041)71 - 948 7060
            (0041)71 - 948 7069
            info@prodeq.ch
            www.prodeq.ch
            Contact person:

           




          Machine category