'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Pneumatic Press

          Machinelist: Pneumatic Press


          Pneumatic Press

          used Presses Pneumatic Press BERG & SCHMID PND 45/S


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69530 · Pneumatic Press

          BERG & SCHMID - PND 45/S - - - neu - -

          Technical details
          pressure 4,5 kN︱stroke 40 mm︱throat 95 mm︱Working height from to 95 - 240 mm︱table surface area 160 x 110 mm︱spindle diameter 25 mm︱weight of the machine ca. 24 Kg︱dimensions 160 x 230 mm︱
          Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings
            pressure 4,5 kN
            stroke 40 mm
            throat 95 mm
            Working height from t. 95 - 240 mm
            table surface area 160 x 110 mm
            spindle diameter 25 mm
            weight of the machine ca. 24 Kg
            dimensions 160 x 230 mm
            Description :
            Direct-acting pneumatic presses
            bring the full pressure performance over the entire stroke length. You will
            above all
            used when long-stroke parts are machined with constant force
            Need to become.
            Convincing technology
            • Long and precise spindle guide for maximum dimensional accuracy
            • Hardened and ground piston rod for practically unlimited service life
            • Double-acting cylinders with end position cushioning on both sides
            • Double guide rings in the piston, constant and quiet running
            • Oil resistant sealing elements
            Special features of the PND series
            • Spindle secured against twisting
            • Spindle return on the PND 85/S only via a cylinder chamber
            additional air savings
            • Easy, quick and precise working height adjustment in 2 steps:
            – Basic setting by simply loosening the clamping screws on the stand
            – Precision fine adjustment via the stroke limiting ring on the piston rod
            Additional benefit:
            Faster cycle time and air savings
          used Presses Pneumatic Press BERG & SCHMID PND 85 S


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6133 · Pneumatic Press

          BERG & SCHMID - PND 85 S - - 2005 -

          Technical details

          used Presses Pneumatic Press BERG & SCHMID PND 85/S


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69531 · Pneumatic Press

          BERG & SCHMID - PND 85/S - - - neu - -

          Technical details
          pressure 8,5 kN︱stroke 40 mm︱throat 95 mm︱Working height from to 95 - 240 mm︱table surface area 160 x 110 mm︱spindle diameter 25 mm︱weight of the machine ca. 27 Kg︱dimensions 160 x 230 mm︱
            pressure 8,5 kN
            stroke 40 mm
            throat 95 mm
            Working height from t. 95 - 240 mm
            table surface area 160 x 110 mm
            spindle diameter 25 mm
            weight of the machine ca. 27 Kg
            dimensions 160 x 230 mm
            Description :

          used Presses Pneumatic Press BERG & SCHMID PNK 3400


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6134 · Pneumatic Press

          BERG & SCHMID - PNK 3400 - - 2005 -

          Technical details

          used Presses Pneumatic Press BURGER DO 3


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-063138 · Pneumatic Press

          BURGER - DO 3 - - ? - konventionell

          Technical details
          pressure at min. stroke 3 t︱throat 150 mm︱stroke - 39 mm︱distance table/ram, max. stroke up, adjustment up 200 mm︱table surface area 280 x 380 mm︱pressure at min. stroke 1,5 t︱no. of strokes with min. stroke - 80 /min︱no. of strokes with max. stroke - 50 /min︱hole in the table 45 mm︱table height over floor 790 mm︱ram surface 115 x 100 mm︱Required air-pressure 4 bar︱weight 0,2 t︱Dimensions (WxDxH) 0,5 x 0,9 x 1,4 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) press force at minimum stroke length approx. 1,5 t stroke rate at minimum stroke length up to approx. 80 /min stroke rate at minimum stroke length up to approx. 60 /min hole in table approx. 45 mm can be offered with or without putting into operation
            pressure at min. stroke 3 t
            throat 150 mm
            stroke - 39 mm
            distance table/ram, max. stroke . 200 mm
            table surface area 280 x 380 mm
            pressure at min. stroke 1,5 t
            no. of strokes with min. stroke - 80 /min
            no. of strokes with max. stroke - 50 /min
            hole in the table 45 mm
            table height over floor 790 mm
            ram surface 115 x 100 mm
            Required air-pressure 4 bar
            weight 0,2 t
            Dimensions (WxDxH) 0,5 x 0,9 x 1,4 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            press force at minimum stroke length approx. 1,5 t
            stroke rate at minimum stroke length up to approx. 80 /min
            stroke rate at minimum stroke length up to approx. 60 /min
            hole in table approx. 45 mm
            can be offered with or without putting into operation
          used Presses Pneumatic Press BURGER DO 5


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113132 · Pneumatic Press

          BURGER - DO 5 - - ? - konventionell

          Technical details
          pressure 5 t︱throat 150 mm︱stroke 40 mm︱no. of strokes 0 - 80 /min︱distance table/ram, max. stroke up, adjustment up 260 mm︱table surface area 340 x 270 mm︱hole in the table 45 mm︱table height over floor 780 mm︱table adjustable 120 mm︱ram surface 60 mm︱weight 0,3 t︱dimensions (WxDxH) 0,4 x 0,8 x 1,4 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with adjustable table, foot operation can be offered with or without putting into operation
            pressure 5 t
            throat 150 mm
            stroke 40 mm
            no. of strokes 0 - 80 /min
            distance table/ram, max. stroke . 260 mm
            table surface area 340 x 270 mm
            hole in the table 45 mm
            table height over floor 780 mm
            table adjustable 120 mm
            ram surface 60 mm
            weight 0,3 t
            dimensions (WxDxH) 0,4 x 0,8 x 1,4 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with adjustable table, foot operation
            can be offered with or without putting into operation
          used Presses Pneumatic Press BURGER DO 5


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24047 · Pneumatic Press

          BURGER - DO 5 - - -

          Technical details

          used Presses Pneumatic Press BURGER DO 5


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24046 · Pneumatic Press

          BURGER - DO 5 - - -

          Technical details

          used Presses Pneumatic Press DUNKES DF 4


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-23133 · Pneumatic Press

          DUNKES - DF 4 - - 1984 -

          Technical details

          Pneumatic hand operated C-frame press with micrometer screw as a depth stop and sensitive handle for operation. This press is suitable for mounting work and straightening work.
            Description :
            Pneumatic hand operated C-frame press with micrometer screw as a depth stop and
            sensitive handle for operation. This press is suitable for mounting work and
            straightening work.
          used Presses Pneumatic Press DUNKES DF 4


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-23134 · Pneumatic Press

          DUNKES - DF 4 - - 1984 -

          Technical details

          Pneumatic hand operated C-frame press with micrometer screw as a depth stop and sensitive handle for operation. This press is suitable for mounting work and straightening work.
            Description :
            Pneumatic hand operated C-frame press with micrometer screw as a depth stop and
            sensitive handle for operation. This press is suitable for mounting work and
            straightening work.
          •   
          •   
          • 1  

            Профіль торговця: Karl Günter Wirths GmbH

          Зв'язатися з трейдером



            Карл Гюнтер Віртс ГмбХ
           Scharpenberger Strasse 96-98
            58256 - Еннепеталь
            Німеччина
            02333-79050 "> 02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net

          Профіль Трейдера

          Про нас - Wirths GmbH в Еннепеталі

          wirths gmbhКарл Г. Віртс заснував компанію в 1956 як механічну майстерню. 1961 розробив цех для пресування і формування штампів. У той час співробітники 30 працювали як майстри в робочій майстерні.
           
          Паралельно Карл Г. Віртс заснував цех по ремонту верстатів. Це також було початком для бізнесу верстатів.

          Умивальник був закритий 1972, але розвинувся бізнес-інструмент.

          У 1972 році було встановлено перший запас. До цього часу будівлі вантажопідйомністю до 50 т.

          На цьому складі ми завжди зберігаємо прибл. Машини 250.

          Ми не орієнтовані на одноразовий бізнес, а на довгостроковий бізнес у відносинах з нашими вітчизняними клієнтами та клієнтами з усіх куточків світу.

          Контакти

          Wirths GmbHКарл Гюнтер Віртс ГмбХ
          Scharpenberger Str. 96-98
          D-58256 Ennepetal / Німеччина




          Karl Günter Wirths GmbH   58256 - Ennepetal Scharpenberger Strasse 96-98 Deutschland
          Karl Günter Wirths GmbH

          Scharpenberger Strasse 96-98



          Contact Trader


            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 - Ennepetal
            Deutschland
            02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net
            Contact person:

           
          ACHTUNG: NEUE FAX Nr. 02333 790555




          Machine category


          Abkantpresse - hydraulisch · Anreißplatte · Aufspannplatte · Bandsäge - horizontal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bohrmaschine · CNC Drehmaschine · Doppelständerziehpresse - Hydraulisch · Flachschleifmaschine - Horizontal · Fräskopf · Fräsmaschine - Universal · Fräswerkzeuge · Handhebel-Schere · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Messmaschine · Plattenfeld · Richtplatte · Rundschleifmaschine · Rundteiltisch - Automatisch · Rundtisch - Universal · Spitzendrehmaschine · Stanzautomat-Doppelständer · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Walzendrehmaschine · Werkstattpresse - hydraulisch ·