'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine SCHRÖDER MAK V 2000/2,0


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92331 · Folding Machine

          SCHRÖDER - MAK V 2000/2,0 - - 2015 - nano Touch

          Technical details
          sheet width 2000 mm︱plate thickness 2 mm︱distance between columns 2080 mm︱Control nano Touch ︱total power requirement 4 kVA︱weight of the machine ca. 1,7 t︱dimensions of the machine ca. 3,1 x 1,5 x 1,7 m︱
          Inclined upper beam 45° with 2-part quick tool clamp Pre-switch off upper beam 15 mm Manual bending beam adjustment 25mm 2-way foot switch manual back gauge 750mm / 7 spring-loaded gauge fingers sharp nose blade 20°/ one-piece 2020mm long lower tool slim 10mm / one-piece 2020mm long lower tool thick 25mm / one-piece 2020mm long Goat's foot blade height 80mm / 2060mm total. length / segmented: Corner piece left 75 - corner piece right 75 30-50-55-60-65-70-75-100-200-200-500-500mm shims Crane suspension hooks are in the control cabinet
            sheet width 2000 mm
            plate thickness 2 mm
            distance between columns 2080 mm
            Control nano Touch
            total power requirement 4 kVA
            weight of the machine ca. 1,7 t
            dimensions of the machine ca. 3,1 x 1,5 x 1,7 m
            Description :
            Inclined upper beam 45° with 2-part quick tool clamp
            Pre-switch off upper beam 15 mm
            Manual bending beam adjustment 25mm
            2-way foot switch
            manual back gauge 750mm / 7 spring-loaded gauge fingers
            sharp nose blade 20°/ one-piece 2020mm long
            lower tool slim 10mm / one-piece 2020mm long
            lower tool thick 25mm / one-piece 2020mm long
            Goat's foot blade height 80mm / 2060mm total. length / segmented:
            Corner piece left 75 - corner piece right 75
            30-50-55-60-65-70-75-100-200-200-500-500mm
            shims
            Crane suspension hooks are in the control cabinet


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHRÖDER MAK 3


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76525 · Folding Machine

          SCHRÖDER - MAK 3 - - 2011 -

          Technical details
          sheet width 4020 mm︱plate thickness 1,50 mm︱distance between columns mm︱stroke of upper beam 250 mm︱cheek lowering Oberwange 250 mm ︱angle adjustable from - to 0-180 Grad︱total power requirement kW︱weight of the machine ca. 4,86 t︱dimensions of the machine ca. 5,185 x 1,220 x 1,425 m︱
          - Control POS 400 NC - Piece counter - foot switch - Rail quick clamping system - manual backgauge - 1x set split goat tool set - 1 pc. sharp rail - 2 pcs. bending splints - hydraulic upper tool clamping Optional - manual back gauge 750 mm without support table (new from SCHRÖDER) - if you are interested, please contact us
            sheet width 4020 mm
            plate thickness 1,50 mm
            stroke of upper beam 250 mm
            cheek lowering Oberwange 250 mm
            angle adjustable from - to 0-180 Grad
            weight of the machine ca. 4,86 t
            dimensions of the machine ca. 5,185 x 1,220 x 1,425 m
            Description :
            - Control POS 400 NC
            - Piece counter
            - foot switch
            - Rail quick clamping system
            - manual backgauge
            - 1x set split goat tool set
            - 1 pc. sharp rail
            - 2 pcs. bending splints
            - hydraulic upper tool clamping

            Optional - manual back gauge 750 mm without support table (new from SCHRÖDER) -
            if you are interested, please contact us


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHRÖDER AKV 1500/2,5


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05897 · Folding Machine

          SCHRÖDER - AKV 1500/2,5 - - 2010 -

          Technical details
          sheet width max. 1500 mm︱plate thickness 2,5 mm︱serial number 150393 ︱weight 1300 kg︱
          ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            sheet width max. 1500 mm
            plate thickness 2,5 mm
            serial number 150393
            weight 1300 kg
            Description :

            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Please note:
            The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.
            Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.
            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHRÖDER MAK 4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76562 · Folding Machine

          SCHRÖDER - MAK 4 - - 2005 -

          Technical details
          sheet width 4020 mm︱plate thickness 4,00 mm︱distance between columns mm︱upper beam stroke 400 mm︱Lowering of bending & lower beam 80 mm︱rated capacity 12,0 kVA︱total power requirement kW︱weight of the machine ca. 10,25 t︱dimensions of the machine ca. m︱
          - Bending beam drive on both sides - Ball screws on the upper beam - Manual crowning device for bending beam - Motorized bending beam adjustment program-controlled - Motorized lower beam adjustment program-controlled - Back gauge 1500 mm can be lowered pneumatically - Graphics control POS 2000 (display control recently renewed) - Sharpening rails 30° and 45° - Bending rail 20 mm
            sheet width 4020 mm
            plate thickness 4,00 mm
            upper beam stroke 400 mm
            Lowering of bending & lower beam 80 mm
            rated capacity 12,0 kVA
            weight of the machine ca. 10,25 t
            Description :
            - Bending beam drive on both sides
            - Ball screws on the upper beam
            - Manual crowning device for bending beam
            - Motorized bending beam adjustment program-controlled
            - Motorized lower beam adjustment program-controlled
            - Back gauge 1500 mm can be lowered pneumatically
            - Graphics control POS 2000 (display control recently renewed)
            - Sharpening rails 30° and 45°
            - Bending rail 20 mm


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHRÖDER MAK II 3020 x 2,0


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3350007 · Folding Machine

          SCHRÖDER - MAK II 3020 x 2,0 - - 2000 - POS 500 NC

          Technical details
          sheet width 3020 mm︱plate thickness 2,0 mm︱distance between columns 3000 mm︱Control POS 500 NC ︱stroke 250 mm︱ max. 135 °︱adjustment UW 80 mm︱back stop - adjustable 1000 mm︱work height max. 975 mm︱total power requirement 6,0 kW︱weight of the machine ca. 3350 kg︱dimensions of the machine ca. 4185 x 1650 x 1425 mm︱
          - Dynamic, powerful motorized swivel bending machine - SCHRÖDER POS 500 NC control unit with LCD display * Tool catalog with tool library * Manual, setup and automatic operation * Bending angle correction memory * Collision checking of the individual axes * quick programming of individual parts - swiveling control panel, right front - Electric back gauge, with sheet metal support surface * Travel 1,000 mm - manual lower beam adjustment - Free-moving double foot switch - Operation manual **Machine will be available in approx. 6-8 weeks**
            sheet width 3020 mm
            plate thickness 2,0 mm
            distance between columns 3000 mm
            Control POS 500 NC
            stroke 250 mm
            max. 135 °
            adjustment UW 80 mm
            back stop - adjustable 1000 mm
            work height max. 975 mm
            total power requirement 6,0 kW
            weight of the machine ca. 3350 kg
            dimensions of the machine ca. 4185 x 1650 x 1425 mm
            Description :
            - Dynamic, powerful motorized swivel bending machine
            - SCHRÖDER POS 500 NC control unit with LCD display
            * Tool catalog with tool library
            * Manual, setup and automatic operation
            * Bending angle correction memory
            * Collision checking of the individual axes
            * quick programming of individual parts
            - swiveling control panel, right front
            - Electric back gauge, with sheet metal support surface
            * Travel 1,000 mm
            - manual lower beam adjustment
            - Free-moving double foot switch
            - Operation manual

            **Machine will be available in approx. 6-8 weeks**


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHRÖDER MAK II


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23127 · Folding Machine

          SCHRÖDER - MAK II - - 1992 - POS 800

          Technical details
          sheet width 3000 mm︱plate thickness 2,5 mm︱distance between columns 3200 mm︱Control POS 800 ︱total power requirement 6 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. B3550x H1550x L2000 mm︱
            sheet width 3000 mm
            plate thickness 2,5 mm
            distance between columns 3200 mm
            Control POS 800
            total power requirement 6 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. B3550x H1550x L2000 mm


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHRÖDER MHSU 1500/2,0


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94167 · Plate Shear - Mechanical

          SCHRÖDER - MHSU 1500/2,0 - - 2009 -

          Technical details
          sheet width 1530 mm︱plate thickness 2,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 0,840 t︱dimensions of the machine ca. 1,90 x 1,30 x 1,20 m︱
          - manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier
            sheet width 1530 mm
            plate thickness 2,00 mm
            weight of the machine ca. 0,840 t
            dimensions of the machine ca. 1,90 x 1,30 x 1,20 m
            Description :
            - manual back gauge 500mm
            - Hold-down device with hard rubber strip
            - Sheet metal holding device mechanically controlled to the rear including
            sheet metal slide
            - Rear area protection via light barrier


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.