'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Coiler

          used Sheet metal working / shaeres / bending Coiler VEB, BAD- SALZUNGEN MHD 125


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15659 · Coiler

          VEB, BAD- SALZUNGEN - MHD 125 - - -

          Technical details
          sheet width 125 mm︱coil weight 2x 0,8 t︱coil internal dia. 300-500 mm︱coil outside dia. 1200 mm︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. BxTxH 2000x2000x1800 mm︱
            sheet width 125 mm
            coil weight 2x 0,8 t
            coil internal dia. 300-500 mm
            coil outside dia. 1200 mm
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. BxTxH 2000x2000x1800 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Coiler LIV


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0424 · Coiler

          LIV - - - -

          Technical details
          Coil weight 2 x 2 t︱Material width 310 mm︱Coil exterior diameter 1300 mm︱Expansion range 380 - 460 mm︱Weight of machine approx. 2,5 t︱
            Coil weight 2 x 2 t
            Material width 310 mm
            Coil exterior diameter 1300 mm
            Expansion range 380 - 460 mm
            Weight of machine approx. 2,5 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact

          Corner Crimping Machines

          used Sheet metal working / shaeres / bending Corner Crimping Machines WEDI PRESSTA 7000 PV 6


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-18785 · Corner Crimping Machines

          WEDI PRESSTA 7000 - PV 6 - - 1977 -

          Technical details
          height of profile 60 mm︱ 60 ︱weight of the machine ca. 188 kg︱dimensions of the machine ca. 0,85 x 0,45 x 1,25 m︱foot switch
          - Fabr.-No.: 292539 - pneumatic clamping head
            height of profile 60 mm
            60
            weight of the machine ca. 188 kg
            dimensions of the machine ca. 0,85 x 0,45 x 1,25 m
            Description :
            - Fabr.-No.: 292539
            - pneumatic clamping head


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact

          Crimping Machine

          used Sheet metal working / shaeres / bending Crimping Machine AK-BEND AKM 400


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050523 · Crimping Machine

          AK-BEND - AKM 400 - - Neu -

          Technical details
          plate thickness 4 mm︱roll-body distance 260 mm︱throat 500 mm︱distance between roll centers 132 mm︱tool adaptor 40 mm︱speed 5 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 350 kg︱dimensions of the machine ca. 1650x700x1280 mm︱
          Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity
            plate thickness 4 mm
            roll-body distance 260 mm
            throat 500 mm
            distance between roll centers 132 mm
            tool adaptor 40 mm
            speed 5 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 350 kg
            dimensions of the machine ca. 1650x700x1280 mm
            Description :
            Domestic equipments:
            - motor driven beading machine
            - 3 sets of bead rollers
            - Footswitch
            - Operating instructions in German
            - CE mark / Declaration of Conformity


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine ROLLMAK BM 250


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051731 · Crimping Machine

          ROLLMAK - BM 250 - - NEU -

          Technical details
          plate thickness 2,5 mm︱ 260 mm︱roll diameter 95 mm︱weight of the machine ca. 295 kg︱dimensions of the machine ca. 1482x450x1145 mm︱
            plate thickness 2,5 mm
            260 mm
            roll diameter 95 mm
            weight of the machine ca. 295 kg
            dimensions of the machine ca. 1482x450x1145 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine ROLLMAK BM 125


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051730 · Crimping Machine

          ROLLMAK - BM 125 - - NEU -

          Technical details
          plate thickness 1,25 mm︱distance between roll centers 62131 mm︱weight of the machine ca. 130 kg︱dimensions of the machine ca. 937x435x1330 mm︱
            plate thickness 1,25 mm
            distance between roll centers 62
            131 mm
            weight of the machine ca. 130 kg
            dimensions of the machine ca. 937x435x1330 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine AK-BEND AKM 125 motor.


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050619 · Crimping Machine

          AK-BEND - AKM 125 motor. - - NEU -

          Technical details
          plate thickness 1,25 mm︱roll-body distance 250 mm︱throat 260 mm︱distance between roll centers 62 mm︱tool adaptor 26 mm︱speed 6,3 m/min︱total power requirement 0,7 kW︱weight 170 kg︱range L-W-H 1020x600x1500 mm︱
          Domestic equipments: - motor driven beading machine - 5 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity
            plate thickness 1,25 mm
            roll-body distance 250 mm
            throat 260 mm
            distance between roll centers 62 mm
            tool adaptor 26 mm
            speed 6,3 m/min
            total power requirement 0,7 kW
            weight 170 kg
            range L-W-H 1020x600x1500 mm
            Description :
            Domestic equipments:
            - motor driven beading machine
            - 5 sets of bead rollers
            - Footswitch
            - Operating instructions in German
            - CE mark / Declaration of Conformity


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine AK-BEND AKM 250 H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051162 · Crimping Machine

          AK-BEND - AKM 250 H - - NEU -

          Technical details
          plate thickness 2,5 mm︱roll-body distance 260 mm︱throat 500 mm︱distance between roll centers 92 mm︱tool adaptor 35 mm︱speed 3,5 m/min︱total power requirement 1,5+0,55 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 1200x700x1200 mm︱
          Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity
            plate thickness 2,5 mm
            roll-body distance 260 mm
            throat 500 mm
            distance between roll centers 92 mm
            tool adaptor 35 mm
            speed 3,5 m/min
            total power requirement 1,5+0,55 kW
            weight of the machine ca. 320 kg
            dimensions of the machine ca. 1200x700x1200 mm
            Description :
            Domestic equipments:
            - motor driven beading machine
            - 3 sets of bead rollers
            - Footswitch
            - Operating instructions in German
            - CE mark / Declaration of Conformity


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine AK-BEND AKM 250 motor.


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4050640 · Crimping Machine

          AK-BEND - AKM 250 motor. - - NEU -

          Technical details
          plate thickness 2,5 mm︱roll-body distance 260 mm︱throat 500 mm︱distance between roll centers 92 mm︱tool adaptor 35 mm︱speed 3,5 m/min︱total power requirement 1,5 kW︱weight of the machine ca. 295 kg︱dimensions of the machine ca. 1200x700x1200 mm︱
          Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity
            plate thickness 2,5 mm
            roll-body distance 260 mm
            throat 500 mm
            distance between roll centers 92 mm
            tool adaptor 35 mm
            speed 3,5 m/min
            total power requirement 1,5 kW
            weight of the machine ca. 295 kg
            dimensions of the machine ca. 1200x700x1200 mm
            Description :
            Domestic equipments:
            - motor driven beading machine
            - 3 sets of bead rollers
            - Footswitch
            - Operating instructions in German
            - CE mark / Declaration of Conformity


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine AK-BEND AKM 400 H


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051161 · Crimping Machine

          AK-BEND - AKM 400 H - - Neu -

          Technical details
          plate thickness 4 mm︱roll-body distance 260 mm︱throat 500 mm︱distance between roll centers 132 mm︱tool adaptor 40 mm︱speed 5 m/min︱total power requirement 2,2+0,55 kW︱weight of the machine ca. 450 kg︱dimensions of the machine ca. 1800x700x1600 mm︱
          Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity
            plate thickness 4 mm
            roll-body distance 260 mm
            throat 500 mm
            distance between roll centers 132 mm
            tool adaptor 40 mm
            speed 5 m/min
            total power requirement 2,2+0,55 kW
            weight of the machine ca. 450 kg
            dimensions of the machine ca. 1800x700x1600 mm
            Description :
            Domestic equipments:
            - motor driven beading machine
            - 3 sets of bead rollers
            - Footswitch
            - Operating instructions in German
            - CE mark / Declaration of Conformity


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine ROLLMAK BM 400


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051732 · Crimping Machine

          ROLLMAK - BM 400 - - NEU -

          Technical details
          plate thickness 4 mm︱ 240 mm︱roll diameter 133 mm︱weight of the machine ca. 440 kg︱dimensions of the machine ca. 1580x550x1245 mm︱
            plate thickness 4 mm
            240 mm
            roll diameter 133 mm
            weight of the machine ca. 440 kg
            dimensions of the machine ca. 1580x550x1245 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine AK-BEND AKM 250 motor.


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051686 · Crimping Machine

          AK-BEND - AKM 250 motor. - - 2021 -

          Technical details
          plate thickness 2,5 mm︱roll-body distance 260 mm︱throat 500 mm︱distance between roll centers 92 mm︱tool adaptor 35 mm︱speed 3,5 m/min︱total power requirement 1,5 kW︱weight of the machine ca. 295 kg︱dimensions of the machine ca. 1200x700x1200 mm︱
          Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity
            plate thickness 2,5 mm
            roll-body distance 260 mm
            throat 500 mm
            distance between roll centers 92 mm
            tool adaptor 35 mm
            speed 3,5 m/min
            total power requirement 1,5 kW
            weight of the machine ca. 295 kg
            dimensions of the machine ca. 1200x700x1200 mm
            Description :
            Domestic equipments:
            - motor driven beading machine
            - 3 sets of bead rollers
            - Footswitch
            - Operating instructions in German
            - CE mark / Declaration of Conformity


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine AK BEND AKM 125 motor.


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-847041 · Crimping Machine

          AK BEND - AKM 125 motor. - - -

          Technical details
          plate thickness 1,25 mm︱throat 250 mm︱distance between roll centers 62,0 mm︱engine output 0,7 kW︱weight 170 kg︱range L-W-H 0,7 x 0,6 x 1,3 mm︱
          Furnishing : - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of various types of beads - high accuracy due to precision-bearing shafts - Clearly arranged switching elements - Underframe equipped with storage compartment - powerful drive motor, even under continuous load - Mobile foot switch for right and left rotation
            plate thickness 1,25 mm
            throat 250 mm
            distance between roll centers 62,0 mm
            engine output 0,7 kW
            weight 170 kg
            range L-W-H 0,7 x 0,6 x 1,3 mm
            Description :
            Furnishing :
            - 4x pairs of beading and flanging rollers included
            - Robust beading machine with motor-driven rollers
            - Lower shaft with adjustable stop
            - for the economical production of various types of beads
            - high accuracy due to precision-bearing shafts
            - Clearly arranged switching elements
            - Underframe equipped with storage compartment
            - powerful drive motor, even under continuous load
            - Mobile foot switch for right and left rotation


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine BERNARDO SM 250 T


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-847529 · Crimping Machine

          BERNARDO - SM 250 T - - -

          Technical details
          plate thickness 1.20 mm︱throat 270 (140) mm︱distance between roll centers 60.0 mm︱total power requirement manuell kW︱weight of the machine ca. 46.0 kg︱dimensions of the machine ca. 600 x 250 x 500 mm︱
          Furnishing: - various replacement rollers - hand crank - front stop
            plate thickness 1.20 mm
            throat 270 (140) mm
            distance between roll centers 60.0 mm
            total power requirement manuell kW
            weight of the machine ca. 46.0 kg
            dimensions of the machine ca. 600 x 250 x 500 mm
            Description :
            Furnishing:
            - various replacement rollers
            - hand crank
            - front stop


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine AK BEND AKM 250 motor.


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8470411 · Crimping Machine

          AK BEND - AKM 250 motor. - - -

          Technical details
          plate thickness 2,5 mm︱throat 260 mm︱distance between roll centers 92 mm︱weight 295 kg︱range L-W-H 1,2 x 0,7 x 1,2 mm︱
          Furnishing : - 3x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of various types of beads - high accuracy due to precision-bearing shafts - Clearly arranged switching elements - Underframe equipped with storage compartment - powerful drive motor, even under continuous load - Mobile foot switch for right and left rotation
            plate thickness 2,5 mm
            throat 260 mm
            distance between roll centers 92 mm
            weight 295 kg
            range L-W-H 1,2 x 0,7 x 1,2 mm
            Description :
            Furnishing :
            - 3x pairs of beading and flanging rollers included
            - Robust beading machine with motor-driven rollers
            - Lower shaft with adjustable stop
            - for the economical production of various types of beads
            - high accuracy due to precision-bearing shafts
            - Clearly arranged switching elements
            - Underframe equipped with storage compartment
            - powerful drive motor, even under continuous load
            - Mobile foot switch for right and left rotation


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine AK BEND AKM 400 hydr.


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8470420 · Crimping Machine

          AK BEND - AKM 400 hydr. - - -

          Technical details
          plate thickness 4,0 mm︱throat 260 mm︱distance between roll centers 132 mm︱stroke 55 Oberwalze mm︱tool adaptor Ø 35 mm, 12 mm Nut mm︱total power requirement 3,0 kW︱weight of the machine ca. 450 kg.︱range L-W-H 1,6 x 0,9 x 1,2 m︱
          Furnishing : - 3x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Hydraulic adjustment of the top roller, with manometer - Lower shaft with adjustable stop - for the economical production of various types of beads - high accuracy due to precision-bearing shafts - Clearly arranged switching elements - Underframe equipped with storage compartment - powerful drive motor, even under continuous load - Mobile foot switch for right and left rotation
            plate thickness 4,0 mm
            throat 260 mm
            distance between roll centers 132 mm
            stroke 55 Oberwalze mm
            tool adaptor Ø 35 mm, 12 mm Nut mm
            total power requirement 3,0 kW
            weight of the machine ca. 450 kg.
            range L-W-H 1,6 x 0,9 x 1,2 m
            Description :
            Furnishing :
            - 3x pairs of beading and flanging rollers included
            - Robust beading machine with motor-driven rollers
            - Hydraulic adjustment of the top roller, with manometer
            - Lower shaft with adjustable stop
            - for the economical production of various types of beads
            - high accuracy due to precision-bearing shafts
            - Clearly arranged switching elements
            - Underframe equipped with storage compartment
            - powerful drive motor, even under continuous load
            - Mobile foot switch for right and left rotation


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine HESSE by ISITAN IK 0,8


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-419 · Crimping Machine

          HESSE by ISITAN - IK 0,8 - - -

          Technical details
          neu9705prompt, Zwischenverkauf vTürkei780 €︱ 10.8 mm︱ 80 mm︱ 110 nm︱ 7 Stk.︱ 52 mm︱ 380 mm︱ 180 mm︱ 380 mm︱ 30 kg︱
          MINT CONDITION 7 tool sets users manual in ENGLISH
            neu
            9705
            prompt, Zwischenverkauf v
            Türkei
            780 €
            1
            0.8 mm
            80 mm
            110 nm
            7 Stk.
            52 mm
            380 mm
            180 mm
            380 mm
            30 kg
            Description :
            MINT CONDITION
            7 tool sets
            users manual in ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine HESSE by ISITAN IBKS 2,5


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-423 · Crimping Machine

          HESSE by ISITAN - IBKS 2,5 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei5500 €︱ 113.85 €︱ 2.5 mm︱ 160 mm︱ 4 Stk.︱ 96 mm︱ 1.5 kW︱ 16 1/min︱ 1400 mm︱ 550 mm︱ 1120 mm︱ 380 kg︱
          reduction motor with brake system movement of rolls with foot pedal adjustable idle roll steel shafts with bronze bushings 4 set of rolls complete with stand user manual in GERMAN or ENGLISH according to CE rules
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            5500 €
            113.85 €
            2.5 mm
            160 mm
            4 Stk.
            96 mm
            1.5 kW
            16 1/min
            1400 mm
            550 mm
            1120 mm
            380 kg
            Description :
            reduction motor with brake system
            movement of rolls with foot pedal
            adjustable idle roll
            steel shafts with bronze bushings
            4 set of rolls
            complete with stand
            user manual in GERMAN or ENGLISH
            according to CE rules


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Crimping Machine HESSE by ISITAN IBKS 4,0


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-425 · Crimping Machine

          HESSE by ISITAN - IBKS 4,0 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei7200 €︱ 149.04 €︱ 4 mm︱ 200 mm︱ 4 Stk.︱ 126 mm︱ 2.2 kW︱ 16 1/min︱ 1700 mm︱ 570 mm︱ 1200 mm︱ 500 kg︱
          reduction motor with brake system movement of rolls with foot pedal adjustable idle roll steel shafts with bronze bushings 4 set of rolls complete with stand user manual in GERMAN or ENGLISH according to CE rules Alternative: Version HIBKS 4,0 with hydraulic top roll adjustment € 10.000,--
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            7200 €
            149.04 €
            4 mm
            200 mm
            4 Stk.
            126 mm
            2.2 kW
            16 1/min
            1700 mm
            570 mm
            1200 mm
            500 kg
            Description :
            reduction motor with brake system
            movement of rolls with foot pedal
            adjustable idle roll
            steel shafts with bronze bushings
            4 set of rolls
            complete with stand
            user manual in GERMAN or ENGLISH
            according to CE rules

            Alternative:
            Version HIBKS 4,0 with hydraulic top roll adjustment € 10.000,--


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact

          Cut to Length Line with Angle Shear

          used Sheet metal working / shaeres / bending Cut to Length Line with Angle Shear Twin Seam Company KA 1501 Autoselect 4


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12324 · Cut to Length Line with Angle Shear

          Twin Seam Company - KA 1501 Autoselect 4 - - 2011 -

          Technical details
          material width 1500 mm︱material thickness 1,25 mm︱coil weight 5 t︱coil internal dia. 470 - 630 mm︱coil external diameter 1000 mm︱duct size min. 140 x 140 mm︱plate thickness min. 0,5 mm︱Duct size max. 2000 x 2000 ︱coil 4 Stck. (pieces)︱Capacity 8-10 T / Tag (day)︱total connected load 4 kW︱dimensions of the machine ca. 9,95 x 2,2 x 2,05 m︱weight of the machine ca. 5,2 t︱Electric 400 Volt ︱Video available on our website. ︱Machine still in the delivery factory ︱Condition: Not more under power
          Automatic Rectangular Duct Forming Machine: The production of ductwork is made from one of the 4 different coils which is automatically feeded into the combined straightening and profiling unit. The coils may have different measurements in the material thickness from 0,5 mm to 1,25 mm or in widths from 500 mm to 1500 mm. The autoselect unit which is fully integrated in the production line is 100% controlled by the main machine’s control system and driven by hydraulic motors. It means that manual handling is not required, because all functions are automatically carried out by the machine. The operator only has to input data either by the keyboard/monitor of the machine or by remote PC. The specially designed machine control system then takes care of executing the orders and selecting the right material dimensions and continuously shows the production status on the VDU/monitor. The machine produces the full range of ductwork programs, for instance full box section, U-shape, L-shape, straight cut with or without stiffening ribs. 99 different duct dimensions or programs can be stored in the machine at the same time. The operator just controls production and retrieves the ducts from the machine. Advantages: • Industrial multiprocessor control system for easy and trouble-free operation. • Up to 99 orders can be stored in the machine at the same time. • One man operation. • Automatic execution of production without help from the operator. • Network connection to T.S. Plasma cutting table. • High capacity max. 10 tons ductwork per 8 hour shift. • Automatic shift between the different material dimensions without any operator involved. The sheet performance refers to 400 N/mm² strength. Selling due to owner's retirement. Machine dealer with own stock of 1600 m²
            material width 1500 mm
            material thickness 1,25 mm
            coil weight 5 t
            coil internal dia. 470 - 630 mm
            coil external diameter 1000 mm
            duct size min. 140 x 140 mm
            plate thickness min. 0,5 mm
            Duct size max. 2000 x 2000
            coil 4 Stck. (pieces)
            Capacity 8-10 T / Tag (day)
            total connected load 4 kW
            dimensions of the machine ca. 9,95 x 2,2 x 2,05 m
            weight of the machine ca. 5,2 t
            Description :
            Automatic Rectangular Duct Forming Machine:
            The production of ductwork is made from one of the 4 different coils which is
            automatically feeded into the combined straightening and profiling unit. The
            coils may have different measurements in the material thickness from 0,5 mm to
            1,25 mm or in widths from 500 mm to 1500 mm. The autoselect unit which is fully
            integrated in the production line is 100% controlled by the main machine’s
            control system and driven by hydraulic motors. It means that manual handling is
            not required, because all functions are automatically carried out by the
            machine. The operator only has to input data either by the keyboard/monitor of
            the machine or by remote PC.
            The specially designed machine control system then takes care of executing the
            orders and selecting the right material dimensions and continuously shows the
            production status on the VDU/monitor.
            The machine produces the full range of ductwork programs, for instance full box
            section, U-shape, L-shape, straight cut with or without stiffening ribs.
            99 different duct dimensions or programs can be stored in the machine at the
            same time. The operator just controls production and retrieves the ducts from
            the machine.
            Advantages:
            • Industrial multiprocessor control system for
            easy and trouble-free operation.
            • Up to 99 orders can be stored in the machine
            at the same time.
            • One man operation.
            • Automatic execution of production without
            help from the operator.
            • Network connection to T.S. Plasma cutting
            table.
            • High capacity max. 10 tons ductwork per 8
            hour shift.
            • Automatic shift between the different material
            dimensions without any operator involved.
            The sheet performance refers to 400 N/mm² strength. Selling due to owner's
            retirement.
            Machine dealer with own stock of 1600 m²


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact

          Cut-to-length-lines

          used Sheet metal working / shaeres / bending Cut-to-length-lines VIGANO/RIVA


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056810 · Cut-to-length-lines

          VIGANO/RIVA - - - 2000/2001 -

          Technical details
          Material Width 2.000 mm︱Material Thickness 1,50 - (5,00)6,00 mm︱Coil Weight max. 30,0 t︱Coil Inside Diameter 580 mm︱Coil Outside Diameter 1.250/1.500 mm︱
          sheet length 580 - 6.000 mm working direction left - right otherwise according to technical specification 05.68-1.0
            Material Width 2.000 mm
            Material Thickness 1,50 - (5,00)6,00 mm
            Coil Weight max. 30,0 t
            Coil Inside Diameter 580 mm
            Coil Outside Diameter 1.250/1.500 mm
            Description :
            sheet length 580 - 6.000 mm
            working direction left - right

            otherwise according to technical specification 05.68-1.0


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines HITACHI


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19439 · Cut-to-length-lines

          HITACHI - - - 1993 -

          Technical details
          sheet width 500 - 1350 mm︱plate thickness 0,3 - 3 mm︱no. of strokes Hub/min︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stainless steel Cut to Length Line(Flying type) - Material: stainless steel, surface treated steel -- Thickness: 0.3–3 mm (as of stainless steel) -- Width: 500-1350 mm -- Trim: 5-25 mm on one side (more than twice the plate thickness) - Material coil: internal diameter 508 mm, external diameter 600–1800 mm -- weight maximum 15 tons -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming) -- Product length: 400–6000 mm Plus/minus 0.3 mm - 6-leveler (6-hi) leveler x 2units types -- Tension: 45 to 50 kg/mm2 -- Yield point: 28 kg/mm2 - Cutting method: Cut while running (flying), numerically controlled rocking type - flying shears -- (Cutting speed) 20–40/80 m/min -- Speed 2-speed change type --- 0.3 to 1.2 mm: 20 to 80 m/min --- 0.21–3 mm: 20–40 m/min -- Slow operation: 0.8 m/min -- Conveyor speed: 20~120m/min -- Cut count: up to 150 cuts/min -- (Product piling) --- Plate width: 500–1350 mm --- No1 piler: 400 to 3100 mm (also used as a reject filer) --- No2 piler: 400–6100 mm --- Load height: up to 600mm --- Load weight: up to 4 tons Line direction: From right to left on control panel Line: Approximately 13 m x 49.050 m (Major facilities) - Coil skid - Coil car - Pay off reel and a paper winder - Coil opener - Rough Leveler - Shear - No. 1 Looper Guide - Side guide and pinch roller - Side trimmer - Scrap winder x2 - No.1 Finisher Leveler (6-hi) - No2 Finisher Leveler (6-hi) - No 2 Looper Guide - Measuring roller, feed roller and paper-off reel - Shear - Conveyor - Cart - No1/No2 piler type - Hydraulic unit: Type - Valve stand type - (Coil skid) -- V-type fixed skid -- Coil maintenance: 1 coil -- Coil weight: up to 15 tonnes -- Coil diameter: 600 to 1800 mm -urethane rubber (Coil Car) Cradle roller type Hydraulic boost Electricity transfer driving type Two guide lots hydraulic cylinder elevating type (payoff reel and paper winder) Overhang, single-mant 4-segment type Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake Paper winder: cone type, (motor DC 1.5KW, 1750 RPM) (Coil Opener) Knife edge method (Rough Leveler) 2-stage (2hi) 5-body roller leveler Pinch rollers: 160 mm × 1450 mm 2 pieces, The upper part of the pinch roller is hydraulic cylinder press-down, and the lower roller is fixed 5 workload rollers 130mm x 1450mm The upper roller of the workload roller is electrically pressed, and the lower roller is fixed 0–40/80 m/min Two-stage change 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Motor: DC 18.5 KW, 1750 RPM, Brake Attachment Pressing motor: 2 1.5KW 100RPMs with brakes (Shear) Hydraulic up cut shear Knife size: 25 mm thickness × 150 mm width × 1450 mm length (No. 1 Looper Guide) Table lift Hydraulic cylinder operation method Loop: Light Volume Control Method Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Side guide and pinch roller) Vertical Free Roller Electrically switched type Side guide roller: 90 mm diameter × 150 mm length × 6 bones Pinch Roller: 2nd Stage (2hi) Roller: 160 mm diameter × 1450 mm length × 2 bones Upper roller: pneumatic cylinder pressure free roller Lower Roller: Fixed Drive Roller (Side trimmer) Overhang Drive Cut 0–40/80 m/min 2-stage change type 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness Motor: DC 5.5KW 1750RPM (Scrap winder) Two machines Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type) Motor: 2 DC 2.2KW 1450 RPM (No1 Finisher Leveler) 6-level (6-hi) 17 leveler Thickness: 1.21–3.0 mm Speed: 6 to 40/80 m/min Thickness 0.3–1.2 mm 6–80 m/min Thickness 1.21–3 mm 6–40 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 60mm x 1750mm x 17e 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium roller: 50 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 55KW 1750 RPM Brake Attachment (No2 Finisher Leveler) 6-level (6-hi) 17 leveler Plate thickness: 0.3–1.2 mm Speed: 5 to 80 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 35mm x 1750mm x 17bon 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium Roller: 32 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows Roller bearing type Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 35KW 1750RPM Brake Attachment (No. 2 Looper Guide) Table lift Hydraulic cylinder operation method Loop: How to control the amount of light (amount of light) Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Measuring roll/feed roller/paper vinyl payoff reel) Measuring roller: The upper roll is pneumatic pressing, the lower roll is fixed, the pressing amount is 30 mm Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press load is 40 mm Motor: DC 2.2KW 1750RPM (Shear) Fluctuating Flying shear 0.3~3mm Speed: 2 groups of 20–40/80 m/min Thickness 0.3–1.6 mm 80 m/min Tlate thickness 1.6–3 mm 40 m/min Cut count: up to 150 cuts/min Cutting length: 400–6000 mm Electric up CUT shear Cut up and down knife die via motor, reducer, pinion stand crankshaft Knife: 20 mmt × 80 mm × 1400 mm × 1 set The top knife is a straight knife, and the bottom is a V-lock knife Adjustment: Wedge Motor: DC 75KW 550RPM (Conveyor) Belt conveyor type Belt width: 1200 mm Conveyor length: 3800 mm Motor DC 5.5KW 1450RPM Brake Attachment (No. 1 No. 2 piler) No1 piler: Combined use of reject truck, air blower Combined use of side conveyor No2 piler: Combined suction conveyor and air blower Loading height: 600 mm Lift: Hydraulic lift volume 650 mm Motor: 4 1.5KW 150RPM units for side guide end stoppers 2.2 KW 1500RPM for lifters 1.5KW for cart 7.5KW for blower (Hydraulic device) 70 kg/cm2 × 100 L/min Pen pump Motor: DC 18.5 KW 1000 RPM (Supply power) AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase (Control power) AC 200V, 50 Hz Single Phase (Compressed air) Compressed air required: 5 kg/cm2
            sheet width 500 - 1350 mm
            plate thickness 0,3 - 3 mm
            Description :
            Stainless steel Cut to Length Line(Flying type)

            - Material: stainless steel, surface treated steel
            -- Thickness: 0.3–3 mm (as of stainless steel)
            -- Width: 500-1350 mm
            -- Trim: 5-25 mm on one side (more than twice the plate thickness)
            - Material coil: internal diameter 508 mm, external diameter 600–1800 mm
            -- weight maximum 15 tons
            -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming)
            -- Product length: 400–6000 mm Plus/minus 0.3 mm

            - 6-leveler (6-hi) leveler x 2units types
            -- Tension: 45 to 50 kg/mm2
            -- Yield point: 28 kg/mm2
            - Cutting method: Cut while running (flying), numerically controlled rocking
            type

            - flying shears
            -- (Cutting speed) 20–40/80 m/min
            -- Speed 2-speed change type
            --- 0.3 to 1.2 mm: 20 to 80 m/min
            --- 0.21–3 mm: 20–40 m/min
            -- Slow operation: 0.8 m/min
            -- Conveyor speed: 20~120m/min
            -- Cut count: up to 150 cuts/min
            -- (Product piling)
            --- Plate width: 500–1350 mm
            --- No1 piler: 400 to 3100 mm (also used as a reject filer)
            --- No2 piler: 400–6100 mm
            --- Load height: up to 600mm
            --- Load weight: up to 4 tons

            Line direction: From right to left on control panel
            Line: Approximately 13 m x 49.050 m
            (Major facilities)
            - Coil skid
            - Coil car
            - Pay off reel and a paper winder
            - Coil opener
            - Rough Leveler
            - Shear
            - No. 1 Looper Guide
            - Side guide and pinch roller
            - Side trimmer
            - Scrap winder x2
            - No.1 Finisher Leveler (6-hi)
            - No2 Finisher Leveler (6-hi)
            - No 2 Looper Guide
            - Measuring roller, feed roller and paper-off reel
            - Shear
            - Conveyor
            - Cart
            - No1/No2 piler type
            - Hydraulic unit: Type
            - Valve stand type
            - (Coil skid)
            -- V-type fixed skid
            -- Coil maintenance: 1 coil
            -- Coil weight: up to 15 tonnes
            -- Coil diameter: 600 to 1800 mm
            -urethane rubber
            (Coil Car)
            Cradle roller type
            Hydraulic boost
            Electricity transfer driving type
            Two guide lots hydraulic cylinder elevating type
            (payoff reel and paper winder)
            Overhang, single-mant 4-segment type
            Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake
            Paper winder: cone type, (motor DC 1.5KW, 1750 RPM)
            (Coil Opener)
            Knife edge method
            (Rough Leveler)
            2-stage (2hi) 5-body roller leveler
            Pinch rollers: 160 mm × 1450 mm 2 pieces,
            The upper part of the pinch roller is hydraulic cylinder press-down, and the
            lower roller is fixed
            5 workload rollers 130mm x 1450mm
            The upper roller of the workload roller is electrically pressed, and the lower
            roller is fixed
            0–40/80 m/min
            Two-stage change
            0.3 to 1.6 mmt: 80 m/min
            1.7 to 1.6 mmt: 40 m/min
            Motor: DC 18.5 KW, 1750 RPM, Brake Attachment
            Pressing motor: 2 1.5KW 100RPMs with brakes
            (Shear)
            Hydraulic up cut shear
            Knife size: 25 mm thickness × 150 mm width × 1450 mm length
            (No. 1 Looper Guide)
            Table lift
            Hydraulic cylinder operation method
            Loop: Light Volume Control Method
            Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller
            (Side guide and pinch roller)
            Vertical Free Roller
            Electrically switched type
            Side guide roller: 90 mm diameter × 150 mm length × 6 bones
            Pinch Roller: 2nd Stage (2hi)
            Roller: 160 mm diameter × 1450 mm length × 2 bones
            Upper roller: pneumatic cylinder pressure free roller
            Lower Roller: Fixed Drive Roller
            (Side trimmer)
            Overhang Drive Cut
            0–40/80 m/min 2-stage change type
            0.3 to 1.6 mmt: 80 m/min
            1.7 to 1.6 mmt: 40 m/min
            Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness
            Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness
            Motor: DC 5.5KW 1750RPM
            (Scrap winder)
            Two machines
            Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type)
            Motor: 2 DC 2.2KW 1450 RPM
            (No1 Finisher Leveler)
            6-level (6-hi) 17 leveler
            Thickness: 1.21–3.0 mm
            Speed: 6 to 40/80 m/min
            Thickness 0.3–1.2 mm 6–80 m/min
            Thickness 1.21–3 mm 6–40 m/min
            Pinch roller: 180 mm × 1750 mm × 2 bones
            The upper roll is a pneumatic cylinder. The lower roll is fixed
            Rubber lining drive roller
            Work roll: 60mm x 1750mm x 17e
            8 for the upper roll, 9 for the lower roll
            Plated abrasive roller
            Medium roller: 50 mm × 1750 mm × 19 pieces
            9 for the upper roll, 10 for the bottom roll
            Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows
            Pressing Method: Lower Roller Parallel Pressing
            Pressing speed: 0.25 mm/sec
            Pressurization: plus or minus 5 mm
            Motor: DC 55KW 1750 RPM Brake Attachment
            (No2 Finisher Leveler)
            6-level (6-hi) 17 leveler
            Plate thickness: 0.3–1.2 mm
            Speed: 5 to 80 m/min
            Pinch roller: 180 mm × 1750 mm × 2 bones
            The upper roll is a pneumatic cylinder. The lower roll is fixed
            Rubber lining drive roller
            Work roll: 35mm x 1750mm x 17bon
            8 for the upper roll, 9 for the lower roll
            Plated abrasive roller
            Medium Roller: 32 mm × 1750 mm × 19 pieces
            9 for the upper roll, 10 for the bottom roll
            Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows
            Roller bearing type
            Pressing Method: Lower Roller Parallel Pressing
            Pressing speed: 0.25 mm/sec
            Pressurization: plus or minus 5 mm
            Motor: DC 35KW 1750RPM Brake Attachment
            (No. 2 Looper Guide)
            Table lift
            Hydraulic cylinder operation method
            Loop: How to control the amount of light (amount of light)
            Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller
            (Measuring roll/feed roller/paper vinyl payoff reel)
            Measuring roller: The upper roll is pneumatic pressing, the lower roll is
            fixed, the pressing amount is 30 mm
            Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press
            load is 40 mm
            Motor: DC 2.2KW 1750RPM
            (Shear)
            Fluctuating Flying shear
            0.3~3mm
            Speed: 2 groups of 20–40/80 m/min
            Thickness 0.3–1.6 mm 80 m/min
            Tlate thickness 1.6–3 mm 40 m/min
            Cut count: up to 150 cuts/min
            Cutting length: 400–6000 mm
            Electric up CUT shear
            Cut up and down knife die via motor, reducer, pinion stand crankshaft
            Knife: 20 mmt × 80 mm × 1400 mm × 1 set
            The top knife is a straight knife, and the bottom is a V-lock knife
            Adjustment: Wedge
            Motor: DC 75KW 550RPM
            (Conveyor)
            Belt conveyor type
            Belt width: 1200 mm
            Conveyor length: 3800 mm
            Motor DC 5.5KW 1450RPM Brake Attachment
            (No. 1 No. 2 piler)
            No1 piler: Combined use of reject truck, air blower
            Combined use of side conveyor
            No2 piler: Combined suction conveyor and air blower
            Loading height: 600 mm
            Lift: Hydraulic lift volume 650 mm
            Motor: 4 1.5KW 150RPM units for side guide end stoppers
            2.2 KW 1500RPM for lifters
            1.5KW for cart
            7.5KW for blower
            (Hydraulic device)
            70 kg/cm2 × 100 L/min
            Pen pump
            Motor: DC 18.5 KW 1000 RPM
            (Supply power)
            AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase
            (Control power)
            AC 200V, 50 Hz Single Phase
            (Compressed air)
            Compressed air required: 5 kg/cm2



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines WILHELMSBURGER


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056410 · Cut-to-length-lines

          WILHELMSBURGER - - - 1975 -

          Technical details
          Material Width 1.800 mm︱Material Thickness 0,50-1,50 mm︱Coil Weight 30,0 t︱Required Space app. m︱Machine Weight app. t︱
          length tolerance ± 0,5 mm width tolerance ± 0,5 mm diagonal tolerance ± 1,0 mm line consisting of: double side decoiler leveler no. of leveling rolls 21 leveling roll diameter 35 mm flying shear magnetic conveyor table - length 10 m 2 output tables electric pneumatic hydraulic
            Material Width 1.800 mm
            Material Thickness 0,50-1,50 mm
            Coil Weight 30,0 t
            Description :
            length tolerance ± 0,5 mm
            width tolerance ± 0,5 mm
            diagonal tolerance ± 1,0 mm

            line consisting of:
            double side decoiler
            leveler
            no. of leveling rolls 21
            leveling roll diameter 35 mm
            flying shear
            magnetic conveyor table - length 10 m
            2 output tables
            electric
            pneumatic
            hydraulic


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines Hydro Meca 90L4C108H


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M825 · Cut-to-length-lines

          Hydro Meca - 90L4C108H - - -

          Technical details
          Capacity 26/34/42/48/60 mm ø︱Machine dimensions (lxwxh) - mm︱Machine weight - kg︱
          Pipe cutting machine
            Capacity 26/34/42/48/60 mm ø
            Machine dimensions (lxwxh) - mm
            Machine weight - kg
            Description :
            Pipe cutting machine


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          • 8  
          • 9  
          •   
          •