'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          bending machine horizontal

          used Sheet metal working / shaeres / bending bending machine horizontal SCHÄFER 4-Walzen Rundbiegemaschine


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1018 · bending machine horizontal

          SCHÄFER - 4-Walzen Rundbiegemaschine - - 1987 -

          Technical details
          pressure / t︱stroke / mm︱table-size / mm︱weight of the machine ca. 65000 kg︱
          Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.
            pressure / t
            stroke / mm
            table-size / mm
            weight of the machine ca. 65000 kg
            Description :
            Make: Shepherd
            Type: SVRM

            4-roller bending machine:

            Year of construction: 1986
            Working width: 3000cm
            Smallest pipe diameter with 600 mm roller: Ø 720 mm
            Smallest tube diameter with 360 mm roller: Ø 460 mm
            Sheet thickness up to (depending on the material): 50 mm
            Material SA- 738 B Working width: 2500 mm
            Material SA- 738 B Material thickness: 35 mm

            conical bending:
            Except for the top roller, all rollers can be moved in an inclined position for
            conical bending. The roller positions can be read on display instruments. For
            semi-automatic or fully automatic operation of the machine, the bearing jewels
            of the rollers are equipped with scale bars and slide cams for limit switch
            actuation. This allows the rollers to return to the same set position over and
            over again, giving a very high level of uniformity in the shot wefts being bent.


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine FASTI 212-30-4


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1150 · Folding Machine

          FASTI - 212-30-4 - - unbekannt -

          Technical details
          sheet width 3040 mm︱plate thickness 4 mm︱distance between columns / mm︱total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            sheet width 3040 mm
            plate thickness 4 mm
            distance between columns / mm
            total power requirement / kW
            weight of the machine ca. / t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine WEINGARTEN QFSOH V


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-19133 · Folding Machine

          WEINGARTEN - QFSOH V - - 1987 -

          Technical details
          sheet width 3000 mm︱plate thickness 12 mm︱distance between columns 3100 mm︱total power requirement 12 kW︱weight of the machine ca. 15 t︱dimensions of the machine ca. 4 x 2,5 x 2,7 m︱
          Machine was complete reconditioned in 1987. Original Year of manufacture is 1958.
            sheet width 3000 mm
            plate thickness 12 mm
            distance between columns 3100 mm
            total power requirement 12 kW
            weight of the machine ca. 15 t
            dimensions of the machine ca. 4 x 2,5 x 2,7 m
            Description :
            Machine was complete reconditioned in 1987. Original Year of manufacture is
            1958.


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake WIEGER AWHC 160/45 HH 300


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-19129 · Hydr. pressbrake

          WIEGER - AWHC 160/45 HH 300 - - 1980 - konv.

          Technical details
          pressure 0160 t︱chamfer lenght 5120 mm︱distance between columns 4050 mm︱Control konv. ︱throat 300 mm︱table width 200 mm︱stroke max. 200 mm︱dayligth 400 mm︱feed down 50 mm/sec︱feed up 100 mm/sec︱feed under pressure 5 mm/sec︱total power requirement 11 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 5,4 x 1,75 x 3,3 m︱
          Machine will be supplied with many tools.
            pressure 0160 t
            chamfer lenght 5120 mm
            distance between columns 4050 mm
            Control konv.
            throat 300 mm
            table width 200 mm
            stroke max. 200 mm
            dayligth 400 mm
            feed down 50 mm/sec
            feed up 100 mm/sec
            feed under pressure 5 mm/sec
            total power requirement 11 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 5,4 x 1,75 x 3,3 m
            Description :
            Machine will be supplied with many tools.


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SAFAN UNBEKANNT


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1149 · Plate Shear - Hydraulic

          SAFAN - UNBEKANNT - - unbekannt -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱distance between columns / mm︱
            sheet width 3000 mm
            plate thickness 6 mm
            distance between columns / mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STEINER HTS 30/16


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-18181 · Plate Shear - Hydraulic

          STEINER - HTS 30/16 - - 1994 -

          Technical details
          sheet width 3000 mm︱plate thickness 16 mm︱distance between columns 3200 mm︱throat 310 mm︱stroke 300 mm︱table width 820 mm︱table height over floor 1215 mm︱Number of downholders 12 St.︱cutting angle 0,5 - 2,5 °︱total power requirement 30 kW︱weight of the machine ca. 19 t︱
          Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor
            sheet width 3000 mm
            plate thickness 16 mm
            distance between columns 3200 mm
            throat 310 mm
            stroke 300 mm
            table width 820 mm
            table height over floor 1215 mm
            Number of downholders 12 St.
            cutting angle 0,5 - 2,5 °
            total power requirement 30 kW
            weight of the machine ca. 19 t
            Description :
            Machine was overhauled in 2010 and was modernized with light barrier at table.
            Machine will be sold with automatic back stop with DRO.

            including flat belt conveyor


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 20-25


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A2025 · Plate Shear - Hydraulic

          EHT - TSS 20-25 - - 1994 -

          Technical details
          sheet width / mm︱plate thickness / mm︱distance between columns / mm︱
          Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment
            sheet width / mm
            plate thickness / mm
            distance between columns / mm
            Description :
            Manufacturer: EHT
            Type: TSS 20-25
            Year of construction: 1994
            Max. Cutting length: 2250 mm
            Max. Sheet thickness: 20 mm
            Strip width min / max: 10/1000 mm
            Distance between the consoles: 2530
            Height above the ground: 900 mm
            Table length without extension arms: 3030 mm
            Oil volume: 800 l
            Max. Pressure: 280 bar
            Operating voltage: 400V
            Control voltage: 230 V.
            Nominal current: 87 A.
            Weight: 15.8 to
            Dimensions L x W x H: 3500 x 2500 x 2400 mm

            Accessories / special equipment
            Pneumatic cutting gap adjustment
            Cutting length limitation
            Roller conveyor elevation bracket
            Hand protection 1 bay
            Multitron control Multitron PS 80; ELCO 85 P
            Lower knife height adjustment



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic MENGELE Hydrl. Tafelschere


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1017 · Plate Shear - Hydraulic

          MENGELE - Hydrl. Tafelschere - - 1980 -

          Technical details
          sheet width / mm︱plate thickness / mm︱distance between columns / mm︱
          Hydraulic guillotine shears Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Sheet thickness SS: 13mm Stop max.: 1m Weight: 34 tons
            sheet width / mm
            plate thickness / mm
            distance between columns / mm
            Description :
            Hydraulic guillotine shears

            Year of construction: 1980
            Brand: Mengele
            Width up to: 3000mm
            Sheet thickness CS: 24mm
            Sheet thickness SS: 13mm
            Stop max.: 1m
            Weight: 34 tons


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Sheet Metal Deburring Machine

          used Sheet metal working / shaeres / bending Sheet Metal Deburring Machine ERNST EM5N II + 2F


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3600 · Sheet Metal Deburring Machine

          ERNST - EM5N II + 2F - - 2008 -

          Technical details
          working width / mm︱workpiece height / mm︱ /
          Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories
            working width / mm
            workpiece height / mm
            /
            Description :
            Workpiece thickness: 1-70 mm
            Min. workpiece length: 350 mm
            Min. workpiece length with magnetic or vacuum track: 80 mm
            Band filter unit volume Ab=900 approx. 350 l
            Band filter unit volume Ab=1400 approx. 400 l
            Working height constant 1000 mm
            Feed speed 2/4 m/min
            Feed speed stepless 1.5-8 m/min
            Operating voltage 400 VAC
            Control voltage 24 V DC, 230 VAC
            Frequency 50Hz
            Compressed air connection R 3/8"
            Minimum compressed air pressure 5 bar
            Minimum compressed air volume EMSN II +2F 10 NI/min
            Minimum compressed air quantity EMSN II /L +2F 80 NI/min
            Overall electrical connection See installation plan
            Weight of the machine working width 900 mm approx. 4200 kg
            Weight of the machine working width 1400 mm approx. 5100 kg
            Weight of the machine working width 1540 mm approx. 5600 kg
            Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide
            Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide
            Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide


            SERIOUS
            Automatic sheet metal deburring machine with wet grinding device
            Type EM 5 N/II/L + 2 F 1400
            Year of construction 2008 Factory - No. 780063

            Machine/Equipment:
            Sheet metal deburring machine using the wet ship process
            for stamping, laser and nipple parts of different materials with flexible
            grinding roller,
            as well as 2 flap brushes for particularly high edge rounding and 2
            Spring steel brushes for oxide removal (worn out)

            The machine is equipped with a continuous conveyor belt for the
            Workpiece transport equipped.
            Effective working width: 1380mm
            Minimum workpiece length: 350mm

            Special equipment:
            •Vacuum suction system 300mm wide, for non-magnetic small parts
            Minimum length of 80mm, with a minimum area of ??200cm²
            •Magnet track 300mm wide
            Minimum length of 80mm, with a minimum area of ??40cm²
            •Frequency converter for stepless feed & speed regulation
            •various Abrasives as accessories


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Strapping tool

          used Sheet metal working / shaeres / bending Strapping tool SPANNTOP Spannzangenfutter


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-M0886 · Strapping tool

          SPANNTOP - Spannzangenfutter - - / -

          Technical details
          /
            /


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.