'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Cut-to-length-lines

          Machinelist: Cut-to-length-lines


          Cut-to-length-lines

          used Sheet metal working / shaeres / bending Cut-to-length-lines VIGANO/RIVA


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056810 · Cut-to-length-lines

          VIGANO/RIVA - - - 2000/2001 -

          Technical details
          Material Width 2.000 mm︱Material Thickness 1,50 - (5,00)6,00 mm︱Coil Weight max. 30,0 t︱Coil Inside Diameter 580 mm︱Coil Outside Diameter 1.250/1.500 mm︱
          sheet length 580 - 6.000 mm working direction left - right otherwise according to technical specification 05.68-1.0
            Material Width 2.000 mm
            Material Thickness 1,50 - (5,00)6,00 mm
            Coil Weight max. 30,0 t
            Coil Inside Diameter 580 mm
            Coil Outside Diameter 1.250/1.500 mm
            Description :
            sheet length 580 - 6.000 mm
            working direction left - right

            otherwise according to technical specification 05.68-1.0


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines HITACHI


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19439 · Cut-to-length-lines

          HITACHI - - - 1993 -

          Technical details
          sheet width 500 - 1350 mm︱plate thickness 0,3 - 3 mm︱no. of strokes Hub/min︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stainless steel Cut to Length Line(Flying type) - Material: stainless steel, surface treated steel -- Thickness: 0.3–3 mm (as of stainless steel) -- Width: 500-1350 mm -- Trim: 5-25 mm on one side (more than twice the plate thickness) - Material coil: internal diameter 508 mm, external diameter 600–1800 mm -- weight maximum 15 tons -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming) -- Product length: 400–6000 mm Plus/minus 0.3 mm - 6-leveler (6-hi) leveler x 2units types -- Tension: 45 to 50 kg/mm2 -- Yield point: 28 kg/mm2 - Cutting method: Cut while running (flying), numerically controlled rocking type - flying shears -- (Cutting speed) 20–40/80 m/min -- Speed 2-speed change type --- 0.3 to 1.2 mm: 20 to 80 m/min --- 0.21–3 mm: 20–40 m/min -- Slow operation: 0.8 m/min -- Conveyor speed: 20~120m/min -- Cut count: up to 150 cuts/min -- (Product piling) --- Plate width: 500–1350 mm --- No1 piler: 400 to 3100 mm (also used as a reject filer) --- No2 piler: 400–6100 mm --- Load height: up to 600mm --- Load weight: up to 4 tons Line direction: From right to left on control panel Line: Approximately 13 m x 49.050 m (Major facilities) - Coil skid - Coil car - Pay off reel and a paper winder - Coil opener - Rough Leveler - Shear - No. 1 Looper Guide - Side guide and pinch roller - Side trimmer - Scrap winder x2 - No.1 Finisher Leveler (6-hi) - No2 Finisher Leveler (6-hi) - No 2 Looper Guide - Measuring roller, feed roller and paper-off reel - Shear - Conveyor - Cart - No1/No2 piler type - Hydraulic unit: Type - Valve stand type - (Coil skid) -- V-type fixed skid -- Coil maintenance: 1 coil -- Coil weight: up to 15 tonnes -- Coil diameter: 600 to 1800 mm -urethane rubber (Coil Car) Cradle roller type Hydraulic boost Electricity transfer driving type Two guide lots hydraulic cylinder elevating type (payoff reel and paper winder) Overhang, single-mant 4-segment type Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake Paper winder: cone type, (motor DC 1.5KW, 1750 RPM) (Coil Opener) Knife edge method (Rough Leveler) 2-stage (2hi) 5-body roller leveler Pinch rollers: 160 mm × 1450 mm 2 pieces, The upper part of the pinch roller is hydraulic cylinder press-down, and the lower roller is fixed 5 workload rollers 130mm x 1450mm The upper roller of the workload roller is electrically pressed, and the lower roller is fixed 0–40/80 m/min Two-stage change 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Motor: DC 18.5 KW, 1750 RPM, Brake Attachment Pressing motor: 2 1.5KW 100RPMs with brakes (Shear) Hydraulic up cut shear Knife size: 25 mm thickness × 150 mm width × 1450 mm length (No. 1 Looper Guide) Table lift Hydraulic cylinder operation method Loop: Light Volume Control Method Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Side guide and pinch roller) Vertical Free Roller Electrically switched type Side guide roller: 90 mm diameter × 150 mm length × 6 bones Pinch Roller: 2nd Stage (2hi) Roller: 160 mm diameter × 1450 mm length × 2 bones Upper roller: pneumatic cylinder pressure free roller Lower Roller: Fixed Drive Roller (Side trimmer) Overhang Drive Cut 0–40/80 m/min 2-stage change type 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness Motor: DC 5.5KW 1750RPM (Scrap winder) Two machines Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type) Motor: 2 DC 2.2KW 1450 RPM (No1 Finisher Leveler) 6-level (6-hi) 17 leveler Thickness: 1.21–3.0 mm Speed: 6 to 40/80 m/min Thickness 0.3–1.2 mm 6–80 m/min Thickness 1.21–3 mm 6–40 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 60mm x 1750mm x 17e 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium roller: 50 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 55KW 1750 RPM Brake Attachment (No2 Finisher Leveler) 6-level (6-hi) 17 leveler Plate thickness: 0.3–1.2 mm Speed: 5 to 80 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 35mm x 1750mm x 17bon 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium Roller: 32 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows Roller bearing type Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 35KW 1750RPM Brake Attachment (No. 2 Looper Guide) Table lift Hydraulic cylinder operation method Loop: How to control the amount of light (amount of light) Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Measuring roll/feed roller/paper vinyl payoff reel) Measuring roller: The upper roll is pneumatic pressing, the lower roll is fixed, the pressing amount is 30 mm Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press load is 40 mm Motor: DC 2.2KW 1750RPM (Shear) Fluctuating Flying shear 0.3~3mm Speed: 2 groups of 20–40/80 m/min Thickness 0.3–1.6 mm 80 m/min Tlate thickness 1.6–3 mm 40 m/min Cut count: up to 150 cuts/min Cutting length: 400–6000 mm Electric up CUT shear Cut up and down knife die via motor, reducer, pinion stand crankshaft Knife: 20 mmt × 80 mm × 1400 mm × 1 set The top knife is a straight knife, and the bottom is a V-lock knife Adjustment: Wedge Motor: DC 75KW 550RPM (Conveyor) Belt conveyor type Belt width: 1200 mm Conveyor length: 3800 mm Motor DC 5.5KW 1450RPM Brake Attachment (No. 1 No. 2 piler) No1 piler: Combined use of reject truck, air blower Combined use of side conveyor No2 piler: Combined suction conveyor and air blower Loading height: 600 mm Lift: Hydraulic lift volume 650 mm Motor: 4 1.5KW 150RPM units for side guide end stoppers 2.2 KW 1500RPM for lifters 1.5KW for cart 7.5KW for blower (Hydraulic device) 70 kg/cm2 × 100 L/min Pen pump Motor: DC 18.5 KW 1000 RPM (Supply power) AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase (Control power) AC 200V, 50 Hz Single Phase (Compressed air) Compressed air required: 5 kg/cm2
            sheet width 500 - 1350 mm
            plate thickness 0,3 - 3 mm
            Description :
            Stainless steel Cut to Length Line(Flying type)

            - Material: stainless steel, surface treated steel
            -- Thickness: 0.3–3 mm (as of stainless steel)
            -- Width: 500-1350 mm
            -- Trim: 5-25 mm on one side (more than twice the plate thickness)
            - Material coil: internal diameter 508 mm, external diameter 600–1800 mm
            -- weight maximum 15 tons
            -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming)
            -- Product length: 400–6000 mm Plus/minus 0.3 mm

            - 6-leveler (6-hi) leveler x 2units types
            -- Tension: 45 to 50 kg/mm2
            -- Yield point: 28 kg/mm2
            - Cutting method: Cut while running (flying), numerically controlled rocking
            type

            - flying shears
            -- (Cutting speed) 20–40/80 m/min
            -- Speed 2-speed change type
            --- 0.3 to 1.2 mm: 20 to 80 m/min
            --- 0.21–3 mm: 20–40 m/min
            -- Slow operation: 0.8 m/min
            -- Conveyor speed: 20~120m/min
            -- Cut count: up to 150 cuts/min
            -- (Product piling)
            --- Plate width: 500–1350 mm
            --- No1 piler: 400 to 3100 mm (also used as a reject filer)
            --- No2 piler: 400–6100 mm
            --- Load height: up to 600mm
            --- Load weight: up to 4 tons

            Line direction: From right to left on control panel
            Line: Approximately 13 m x 49.050 m
            (Major facilities)
            - Coil skid
            - Coil car
            - Pay off reel and a paper winder
            - Coil opener
            - Rough Leveler
            - Shear
            - No. 1 Looper Guide
            - Side guide and pinch roller
            - Side trimmer
            - Scrap winder x2
            - No.1 Finisher Leveler (6-hi)
            - No2 Finisher Leveler (6-hi)
            - No 2 Looper Guide
            - Measuring roller, feed roller and paper-off reel
            - Shear
            - Conveyor
            - Cart
            - No1/No2 piler type
            - Hydraulic unit: Type
            - Valve stand type
            - (Coil skid)
            -- V-type fixed skid
            -- Coil maintenance: 1 coil
            -- Coil weight: up to 15 tonnes
            -- Coil diameter: 600 to 1800 mm
            -urethane rubber
            (Coil Car)
            Cradle roller type
            Hydraulic boost
            Electricity transfer driving type
            Two guide lots hydraulic cylinder elevating type
            (payoff reel and paper winder)
            Overhang, single-mant 4-segment type
            Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake
            Paper winder: cone type, (motor DC 1.5KW, 1750 RPM)
            (Coil Opener)
            Knife edge method
            (Rough Leveler)
            2-stage (2hi) 5-body roller leveler
            Pinch rollers: 160 mm × 1450 mm 2 pieces,
            The upper part of the pinch roller is hydraulic cylinder press-down, and the
            lower roller is fixed
            5 workload rollers 130mm x 1450mm
            The upper roller of the workload roller is electrically pressed, and the lower
            roller is fixed
            0–40/80 m/min
            Two-stage change
            0.3 to 1.6 mmt: 80 m/min
            1.7 to 1.6 mmt: 40 m/min
            Motor: DC 18.5 KW, 1750 RPM, Brake Attachment
            Pressing motor: 2 1.5KW 100RPMs with brakes
            (Shear)
            Hydraulic up cut shear
            Knife size: 25 mm thickness × 150 mm width × 1450 mm length
            (No. 1 Looper Guide)
            Table lift
            Hydraulic cylinder operation method
            Loop: Light Volume Control Method
            Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller
            (Side guide and pinch roller)
            Vertical Free Roller
            Electrically switched type
            Side guide roller: 90 mm diameter × 150 mm length × 6 bones
            Pinch Roller: 2nd Stage (2hi)
            Roller: 160 mm diameter × 1450 mm length × 2 bones
            Upper roller: pneumatic cylinder pressure free roller
            Lower Roller: Fixed Drive Roller
            (Side trimmer)
            Overhang Drive Cut
            0–40/80 m/min 2-stage change type
            0.3 to 1.6 mmt: 80 m/min
            1.7 to 1.6 mmt: 40 m/min
            Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness
            Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness
            Motor: DC 5.5KW 1750RPM
            (Scrap winder)
            Two machines
            Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type)
            Motor: 2 DC 2.2KW 1450 RPM
            (No1 Finisher Leveler)
            6-level (6-hi) 17 leveler
            Thickness: 1.21–3.0 mm
            Speed: 6 to 40/80 m/min
            Thickness 0.3–1.2 mm 6–80 m/min
            Thickness 1.21–3 mm 6–40 m/min
            Pinch roller: 180 mm × 1750 mm × 2 bones
            The upper roll is a pneumatic cylinder. The lower roll is fixed
            Rubber lining drive roller
            Work roll: 60mm x 1750mm x 17e
            8 for the upper roll, 9 for the lower roll
            Plated abrasive roller
            Medium roller: 50 mm × 1750 mm × 19 pieces
            9 for the upper roll, 10 for the bottom roll
            Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows
            Pressing Method: Lower Roller Parallel Pressing
            Pressing speed: 0.25 mm/sec
            Pressurization: plus or minus 5 mm
            Motor: DC 55KW 1750 RPM Brake Attachment
            (No2 Finisher Leveler)
            6-level (6-hi) 17 leveler
            Plate thickness: 0.3–1.2 mm
            Speed: 5 to 80 m/min
            Pinch roller: 180 mm × 1750 mm × 2 bones
            The upper roll is a pneumatic cylinder. The lower roll is fixed
            Rubber lining drive roller
            Work roll: 35mm x 1750mm x 17bon
            8 for the upper roll, 9 for the lower roll
            Plated abrasive roller
            Medium Roller: 32 mm × 1750 mm × 19 pieces
            9 for the upper roll, 10 for the bottom roll
            Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows
            Roller bearing type
            Pressing Method: Lower Roller Parallel Pressing
            Pressing speed: 0.25 mm/sec
            Pressurization: plus or minus 5 mm
            Motor: DC 35KW 1750RPM Brake Attachment
            (No. 2 Looper Guide)
            Table lift
            Hydraulic cylinder operation method
            Loop: How to control the amount of light (amount of light)
            Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller
            (Measuring roll/feed roller/paper vinyl payoff reel)
            Measuring roller: The upper roll is pneumatic pressing, the lower roll is
            fixed, the pressing amount is 30 mm
            Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press
            load is 40 mm
            Motor: DC 2.2KW 1750RPM
            (Shear)
            Fluctuating Flying shear
            0.3~3mm
            Speed: 2 groups of 20–40/80 m/min
            Thickness 0.3–1.6 mm 80 m/min
            Tlate thickness 1.6–3 mm 40 m/min
            Cut count: up to 150 cuts/min
            Cutting length: 400–6000 mm
            Electric up CUT shear
            Cut up and down knife die via motor, reducer, pinion stand crankshaft
            Knife: 20 mmt × 80 mm × 1400 mm × 1 set
            The top knife is a straight knife, and the bottom is a V-lock knife
            Adjustment: Wedge
            Motor: DC 75KW 550RPM
            (Conveyor)
            Belt conveyor type
            Belt width: 1200 mm
            Conveyor length: 3800 mm
            Motor DC 5.5KW 1450RPM Brake Attachment
            (No. 1 No. 2 piler)
            No1 piler: Combined use of reject truck, air blower
            Combined use of side conveyor
            No2 piler: Combined suction conveyor and air blower
            Loading height: 600 mm
            Lift: Hydraulic lift volume 650 mm
            Motor: 4 1.5KW 150RPM units for side guide end stoppers
            2.2 KW 1500RPM for lifters
            1.5KW for cart
            7.5KW for blower
            (Hydraulic device)
            70 kg/cm2 × 100 L/min
            Pen pump
            Motor: DC 18.5 KW 1000 RPM
            (Supply power)
            AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase
            (Control power)
            AC 200V, 50 Hz Single Phase
            (Compressed air)
            Compressed air required: 5 kg/cm2



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines WILHELMSBURGER


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056410 · Cut-to-length-lines

          WILHELMSBURGER - - - 1975 -

          Technical details
          Material Width 1.800 mm︱Material Thickness 0,50-1,50 mm︱Coil Weight 30,0 t︱Required Space app. m︱Machine Weight app. t︱
          length tolerance ± 0,5 mm width tolerance ± 0,5 mm diagonal tolerance ± 1,0 mm line consisting of: double side decoiler leveler no. of leveling rolls 21 leveling roll diameter 35 mm flying shear magnetic conveyor table - length 10 m 2 output tables electric pneumatic hydraulic
            Material Width 1.800 mm
            Material Thickness 0,50-1,50 mm
            Coil Weight 30,0 t
            Description :
            length tolerance ± 0,5 mm
            width tolerance ± 0,5 mm
            diagonal tolerance ± 1,0 mm

            line consisting of:
            double side decoiler
            leveler
            no. of leveling rolls 21
            leveling roll diameter 35 mm
            flying shear
            magnetic conveyor table - length 10 m
            2 output tables
            electric
            pneumatic
            hydraulic


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines Hydro Meca 90L4C108H


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M825 · Cut-to-length-lines

          Hydro Meca - 90L4C108H - - -

          Technical details
          Capacity 26/34/42/48/60 mm ø︱Machine dimensions (lxwxh) - mm︱Machine weight - kg︱
          Pipe cutting machine
            Capacity 26/34/42/48/60 mm ø
            Machine dimensions (lxwxh) - mm
            Machine weight - kg
            Description :
            Pipe cutting machine


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 20-20


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08037 · Plate Shear - Mechanical

          KAPEMA - SMP 20-20 - - Fabrikneu / new -

          Technical details
          sheet width 2050 mm︱plate thickness 2 mm︱strokes per minute until 38 ︱cutting angle 1,75 °︱table height over floor 870 mm︱total power requirement 3 kW︱weight of the machine ca. 1520 kg︱range L-W-H 2,2 x 0,6 x 1,2 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch
          The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
            sheet width 2050 mm
            plate thickness 2 mm
            strokes per minute until 38
            cutting angle 1,75 °
            table height over floor 870 mm
            total power requirement 3 kW
            weight of the machine ca. 1520 kg
            range L-W-H 2,2 x 0,6 x 1,2 m
            Description :
            The new motor guillotine type SMP is a well dimensioned machine with
            all-welded link guides. The drive takes place with a
            Standard geared brake motor via a chain connection to the main axle. the
            Knives are of the highest quality. The optimal cutting angle secures the
            Together with the rubber-covered blank holder perfect cuts.
            Bearings and guides are maintenance and lubrication-free.
            Standard equipment: • Back gauge 665 with mm scale. •
            cutting edge lighting. • Section counter. • Table extensions 600 mm. •
            Right angle stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            Rear protective grille, warranty = 12 months for single-shift operation.
            Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm

            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 12-30


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08408 · Plate Shear - Mechanical

          KAPEMA - SMP 12-30 - - Fabrikneu / new -

          Technical details
          sheet width 1275 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 3 kW︱weight of the machine ca. 875 kg︱range L-W-H 1,7 x 1,68 x 1,1 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch ︱Piece counter ︱Squaring arm ︱Support arms
          The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensions 600 mm. • Right-angled stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • rear photocell. Pre-freight to our stock + packaging 270, -. Machine dealer with own stock of 1600 m².
            sheet width 1275 mm
            plate thickness 3 mm
            strokes per minute until 35
            cutting angle 2,0 °
            table height over floor 870 mm
            thickness at "Niro-steel" 2 mm
            total power requirement 3 kW
            weight of the machine ca. 875 kg
            range L-W-H 1,7 x 1,68 x 1,1 m
            Description :
            The guillotine shears type SMP is a well-dimensioned machine with
            all-welded gate guides. The drive takes place with a standard geared brake
            motor via a chain connection to the main axis. The knives are of the highest
            quality. The optimal cutting angle ensures together with the rubber-coated
            sheet metal holder, perfect cuts.
            Bearings and guides are maintenance-free and lubrication-free.
            Standard equipment: • Back gauge 635 with mm scale. •
            Cutting line lighting. • Section counter. • Table extensions 600 mm. •
            Right-angled stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            rear photocell.
            Pre-freight to our stock + packaging 270, -.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 20-30


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08417 · Plate Shear - Mechanical

          KAPEMA - SMP 20-30 - - Fabrikneu / new -

          Technical details
          sheet width 2050 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 4 kW︱weight of the machine ca. 1550 kg︱range L-W-H 2,5 x 1,57 x 1,21 m︱Electric 380 Volt
          The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
            sheet width 2050 mm
            plate thickness 3 mm
            strokes per minute until 35
            cutting angle 2,0 °
            table height over floor 870 mm
            thickness at "Niro-steel" 2 mm
            total power requirement 4 kW
            weight of the machine ca. 1550 kg
            range L-W-H 2,5 x 1,57 x 1,21 m
            Description :
            The new motor guillotine type SMP is a well dimensioned machine with
            all-welded link guides. The drive takes place with a
            Standard geared brake motor via a chain connection to the main axle. the
            Knives are of the highest quality. The optimal cutting angle secures the
            Together with the rubber-covered blank holder perfect cuts.
            Bearings and guides are maintenance and lubrication-free.
            Standard equipment: • Back gauge 665 with mm scale. •
            cutting edge lighting. • Section counter. • Table extensions 600 mm. •
            Right angle stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            Rear protective grille, warranty = 12 months for single-shift operation.
            Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm

            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical RFR MS/24


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-01210 · Plate Shear - Mechanical

          RFR - MS/24 - - ca. 1960 -

          Technical details
          sheet width 2300 mm︱plate thickness 1,5 mm︱distance between columns 2400 mm︱impact length 1000 mm︱total power requirement kW︱weight of the machine ca. 0,5 t︱
            sheet width 2300 mm
            plate thickness 1,5 mm
            distance between columns 2400 mm
            impact length 1000 mm
            weight of the machine ca. 0,5 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical RAS 53.60


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-22062 · Plate Shear - Mechanical

          RAS - 53.60 - - 380/6 -

          Technical details
          sheet width 2000 mm︱plate thickness 2,25 mm︱distance between columns 2040 mm︱total power requirement 7,5 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2,2x1,7x1,1 m︱
            sheet width 2000 mm
            plate thickness 2,25 mm
            distance between columns 2040 mm
            total power requirement 7,5 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 2,2x1,7x1,1 m
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical OSTAS RGM 1550 x 3


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1144 · Plate Shear - Mechanical

          OSTAS - RGM 1550 x 3 - - 2019 -

          Technical details
          sheet width 1550 mm︱plate thickness 3 mm︱total power requirement 3 kW︱weight of the machine ca. 1600 kg︱dimensions of the machine ca. 2.060 x 1.140 x 1.210 mm︱
          Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30' Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting
            sheet width 1550 mm
            plate thickness 3 mm
            total power requirement 3 kW
            weight of the machine ca. 1600 kg
            dimensions of the machine ca. 2.060 x 1.140 x 1.210 mm
            Description :
            Producer: OSTAS
            Type: RGM 1050 x 3
            YOM: new

            Max. Shearing Length: 1.050 mm
            Shearing Capacity: 3 mm
            Shearing Angle: 2°30'
            Strokes Per Minute: 35 d/d

            Motor Power: 3 kW
            Table Width: 510 mm
            Table Height: 820 mm
            Rear Gauge Distance: 500 mm
            Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm
            Weight: ca. 1.100 kg


            Additional information:

            • Manual backgauge with 500 mm stroke

            • Squaring arm with T-slot, stopper and ruler

            • Foot pedal

            • Front sheet holding arms

            • Cutting line lighting

            • Protection Cages




            optional:

            • Cutting unit counter
            • Motorised backgauge with 500 mm stroke
            • Backgauge with NC control
            • Pneumatic Sheet Support System
            • Optical security bar
            • 0-180° angle cutting


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical METALLKRAFT FTBS 1050-10


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3320042 · Plate Shear - Mechanical

          METALLKRAFT - FTBS 1050-10 - - 2017 -

          Technical details
          sheet width 1050 mm︱plate thickness 1 mm︱distance between columns 1000 mm︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,16 x 0,93 x 0,73 m︱
            sheet width 1050 mm
            plate thickness 1 mm
            distance between columns 1000 mm
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 1,16 x 0,93 x 0,73 m
            Description :



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical DURMA MS 2504


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94086 · Plate Shear - Mechanical

          DURMA - MS 2504 - - 2012 -

          Technical details
          sheet width 2550 mm︱plate thickness 4,00 mm︱distance between columns 2600 mm︱back stop - adjustable 750 mm︱no. of strokes 42 Hub/min︱cutting angle 1°30 ︱table width 450 mm︱table height 800 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3230 kg︱dimensions of the machine ca. 3200 x 2300 x 1350 mm︱
          ** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife
            sheet width 2550 mm
            plate thickness 4,00 mm
            distance between columns 2600 mm
            back stop - adjustable 750 mm
            no. of strokes 42 Hub/min
            cutting angle 1°30
            table width 450 mm
            table height 800 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3230 kg
            dimensions of the machine ca. 3200 x 2300 x 1350 mm
            Description :
            ** Current new price with special accessories ~ 33.000 euros
            ** from a maintenance workshop / good condition (!!)

            Furnishing:
            - robust / powerful mechanical guillotine shears
            - electric backgauge, with ball screws
            - with DURMA NC control - model D-Touch 7
            * Control unit with touchscreen function
            * 128 MB internal memory (programming possible)
            * Multilingual (English, Turkish, German)
            * INCH/metric conversion
            - manual cutting gap adjustment, from the front
            * analogue display of the material thickness
            - 1x extra long side stop 2.000 mm, with support foot & T-slot
            - 2x support arms
            - Ball casters in the support table
            - free-moving footswitch
            - rear protective device (light barrier)
            - original operating instructions (machine + control)

            Special accessories included :
            - Pneumatic sheet metal holding device, for thin sheet metal blanks
            - 1x extra long side stop, with support foot
            - 1x box with spare knife


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical DURMA MS 2504


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325259 · Plate Shear - Mechanical

          DURMA - MS 2504 - - 2012 -

          Technical details
          sheet width 2550 mm︱plate thickness 4,0 mm︱distance between columns 2600 mm︱back stop - adjustable 750 mm︱no. of strokes 42 Hub/min︱cutting angle 1°30 ︱table width 450 mm︱table height 800 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3230 kg︱dimensions of the machine ca. 3200 x 2300 x 1350 mm︱
          ** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife
            sheet width 2550 mm
            plate thickness 4,0 mm
            distance between columns 2600 mm
            back stop - adjustable 750 mm
            no. of strokes 42 Hub/min
            cutting angle 1°30
            table width 450 mm
            table height 800 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3230 kg
            dimensions of the machine ca. 3200 x 2300 x 1350 mm
            Description :
            ** Current new price with special accessories ~ 33.000 euros
            ** from a maintenance workshop / good condition (!!)

            Furnishing:
            - robust / powerful mechanical guillotine shears
            - electric backgauge, with ball screws
            - with DURMA NC control - model D-Touch 7
            * Control unit with touchscreen function
            * 128 MB internal memory (programming possible)
            * Multilingual (English, Turkish, German)
            * INCH/metric conversion
            - manual cutting gap adjustment, from the front
            * analogue display of the material thickness
            - 1x extra long side stop 2.000 mm, with support foot & T-slot
            - 2x support arms
            - Ball casters in the support table
            - free-moving footswitch
            - rear protective device (light barrier)
            - original operating instructions (machine + control)

            Special accessories included :
            - Pneumatic sheet metal holding device, for thin sheet metal blanks
            - 1x extra long side stop, with support foot
            - 1x box with spare knife


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHRÖDER MHSU 1500/2,0


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94167 · Plate Shear - Mechanical

          SCHRÖDER - MHSU 1500/2,0 - - 2009 -

          Technical details
          sheet width 1530 mm︱plate thickness 2,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 0,840 t︱dimensions of the machine ca. 1,90 x 1,30 x 1,20 m︱
          - manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier
            sheet width 1530 mm
            plate thickness 2,00 mm
            weight of the machine ca. 0,840 t
            dimensions of the machine ca. 1,90 x 1,30 x 1,20 m
            Description :
            - manual back gauge 500mm
            - Hold-down device with hard rubber strip
            - Sheet metal holding device mechanically controlled to the rear including
            sheet metal slide
            - Rear area protection via light barrier


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical DURMA MS 2504


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011200 · Plate Shear - Mechanical

          DURMA - MS 2504 - - 2009 -

          Technical details
          sheet width 2550 mm︱plate thickness 4 mm︱cutting angle 1 °︱no. of strokes 42 Hub/min︱rear stop 750 ︱table width 450 mm︱table height 800 mm︱weight of the machine ca. 3500 kg︱dimensions of the machine ca. 3200x2300x1400 mm︱
            sheet width 2550 mm
            plate thickness 4 mm
            cutting angle 1 °
            no. of strokes 42 Hub/min
            rear stop 750
            table width 450 mm
            table height 800 mm
            weight of the machine ca. 3500 kg
            dimensions of the machine ca. 3200x2300x1400 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHROEDER MHSUV 2000/4,0


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94125 · Plate Shear - Mechanical

          SCHROEDER - MHSUV 2000/4,0 - - 2008 - POS 100

          Technical details
          sheet width 2030 mm︱plate thickness 4,00 mm︱thickness at "Niro-steel" 2,50 mm︱no. of strokes 34 Hub/min︱cutting angle 2,5 Grad︱table height 820 mm︱distance between columns 2340 mm︱Control POS 100 ︱back stop - adjustable max. 750 mm︱engine output 6,8 kW︱weight of the machine ca. 2860 kg.︱range L-W-H 2870 x 2070 x 1400 mm︱
          ** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades
            sheet width 2030 mm
            plate thickness 4,00 mm
            thickness at "Niro-steel" 2,50 mm
            no. of strokes 34 Hub/min
            cutting angle 2,5 Grad
            table height 820 mm
            distance between columns 2340 mm
            Control POS 100
            back stop - adjustable max. 750 mm
            engine output 6,8 kW
            weight of the machine ca. 2860 kg.
            range L-W-H 2870 x 2070 x 1400 mm
            Description :
            ** Machine from a maintenance workshop
            ** very well maintained condition - hardly used (!!)

            Furnishing:
            - robust / motorized swing-cut guillotine shears
            - Shatterproof, torsion-free steel welded construction
            - compact and clear mechanical design
            - Electric back gauge, with SCHRÖDER POS 100 NC control
            * Digital position display from the backgauge
            * adjustable from the front right
            * with target/actual value input
            * Continuous adjustment over the entire travel range
            * Protection of limit values with limit switches
            * 9-fold programming possible
            - "Duo-Cut" drive with two dynamic, powerful geared motors
            - Support table with recessed grips
            - Hold-down bar with hard rubber strip
            - All-steel knife, double-edged
            - 1x side stop, with T-slot and mm scale
            - 2x extended sheet metal support arms, with T-slot and mm scale
            - Selector switch for single and continuous stroke
            - freely movable foot switch
            - Rear safety device
            - original operating instructions + CD Rom

            **Special accessories included:
            - pneumatically controlled sheet metal holding device for thin sheet metal cuts
            * Sheet metal removal / sheet metal slide to the front (operator side)
            - 1x wooden box with replacement scissor blades



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHROEDER MHSUV 2000/4,0


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325303 · Plate Shear - Mechanical

          SCHROEDER - MHSUV 2000/4,0 - - 2008 - POS 100

          Technical details
          sheet width 2030 mm︱plate thickness 4,0 mm︱thickness at "Niro-steel" 2,5 mm︱no. of strokes 34 Hub/min︱cutting angle 2,5 Grad︱table height 820 mm︱distance between columns 2340 mm︱Control POS 100 ︱back stop - adjustable max. 750 mm︱engine output 6,8 kW︱weight of the machine ca. 2860 kg.︱range L-W-H 2870 x 2070 x 1400 mm︱
          ** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325303 * Machinevideo : https://www.youtube.com/watch?v=5w-LdgCg6J8
            sheet width 2030 mm
            plate thickness 4,0 mm
            thickness at "Niro-steel" 2,5 mm
            no. of strokes 34 Hub/min
            cutting angle 2,5 Grad
            table height 820 mm
            distance between columns 2340 mm
            Control POS 100
            back stop - adjustable max. 750 mm
            engine output 6,8 kW
            weight of the machine ca. 2860 kg.
            range L-W-H 2870 x 2070 x 1400 mm
            Description :
            ** Machine from a maintenance workshop
            ** very well maintained condition - hardly used (!!)

            Furnishing:
            - robust / motorized swing-cut guillotine shears
            - Shatterproof, torsion-free steel welded construction
            - compact and clear mechanical design
            - Electric back gauge, with SCHRÖDER POS 100 NC control
            * Digital position display from the backgauge
            * adjustable from the front right
            * with target/actual value input
            * Continuous adjustment over the entire travel range
            * Protection of limit values with limit switches
            * 9-fold programming possible
            - "Duo-Cut" drive with two dynamic, powerful geared motors
            - Support table with recessed grips
            - Hold-down bar with hard rubber strip
            - All-steel knife, double-edged
            - 1x side stop, with T-slot and mm scale
            - 2x extended sheet metal support arms, with T-slot and mm scale
            - Selector switch for single and continuous stroke
            - freely movable foot switch
            - Rear safety device
            - original operating instructions + CD Rom

            **Special accessories included:
            - pneumatically controlled sheet metal holding device for thin sheet metal cuts
            * Sheet metal removal / sheet metal slide to the front (operator side)
            - 1x wooden box with replacement scissor blades

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325303

            * Machinevideo :
            https://www.youtube.com/watch?v=5w-LdgCg6J8


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical FASTI 527


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18192 · Plate Shear - Mechanical

          FASTI - 527 - - 2003 -

          Technical details
          sheet width 2500 mm︱plate thickness 5 mm︱distance between columns 2550 mm︱sheet width - max. 2540 mm︱number of strokes - loaded 50 Hübe/min.︱cutting angle 1,2° °︱total power requirement 7,5 kW︱weight of the machine ca. 3200 t︱dimensions of the machine ca. 2,8 x 2 x 1,6 m︱
          It has an electronic back gauge with digital readout. It has 1 side guiding arm, 2 support arm, foot switch etc. It has a sheet holding device at the back side.
            sheet width 2500 mm
            plate thickness 5 mm
            distance between columns 2550 mm
            sheet width - max. 2540 mm
            number of strokes - loaded 50 Hübe/min.
            cutting angle 1,2° °
            total power requirement 7,5 kW
            weight of the machine ca. 3200 t
            dimensions of the machine ca. 2,8 x 2 x 1,6 m
            Description :
            It has an electronic back gauge with digital readout.
            It has 1 side guiding arm, 2 support arm, foot switch etc.
            It has a sheet holding device at the back side.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical FORMAT TS2-1000-50


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94042 · Plate Shear - Mechanical

          FORMAT - TS2-1000-50 - - 1997 -

          Technical details
          sheet width 1050 mm︱plate thickness 3,00 mm ST︱cutting angle 2,0 °︱stroke max. 38 p. Min.︱total power requirement 5,5 kW︱weight of the machine ca. 1690 kg.︱range L-W-H 1800 x 1800 x 1250 mm︱
          ** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch
            sheet width 1050 mm
            plate thickness 3,00 mm ST
            cutting angle 2,0 °
            stroke max. 38 p. Min.
            total power requirement 5,5 kW
            weight of the machine ca. 1690 kg.
            range L-W-H 1800 x 1800 x 1250 mm
            Description :
            ** from a maintenance workshop (!!)

            Furnishing:
            - Motorized / electric guillotine shears
            - manual backgauge, adjustment by hand crank
            * Travel range max. 700 mm
            * with analogue position display (scale)
            * manual adjustment from behind
            - rear protection
            - rear sheet metal slide
            - free-moving footswitch


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical FORMAT TS2-1000-50


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325255 · Plate Shear - Mechanical

          FORMAT - TS2-1000-50 - - 1997 -

          Technical details
          sheet width 1050 mm︱plate thickness 3,0 mm ST︱cutting angle 2,0 °︱stroke max. 38 p. Min.︱total power requirement 5,5 kW︱weight of the machine ca. 1690 kg.︱range L-W-H 1800 x 1800 x 1250 mm︱
          ** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch
            sheet width 1050 mm
            plate thickness 3,0 mm ST
            cutting angle 2,0 °
            stroke max. 38 p. Min.
            total power requirement 5,5 kW
            weight of the machine ca. 1690 kg.
            range L-W-H 1800 x 1800 x 1250 mm
            Description :
            ** from a maintenance workshop (!!)

            Furnishing:
            - Motorized / electric guillotine shears
            - manual backgauge, adjustment by hand crank
            * Travel range max. 700 mm
            * with analogue position display (scale)
            * manual adjustment from behind
            - rear protection
            - rear sheet metal slide
            - free-moving footswitch


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical DURMAZLAR RGM 2550 x 2,5


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-092052 · Plate Shear - Mechanical

          DURMAZLAR - RGM 2550 x 2,5 - - 1996 -

          Technical details
          sheet width 2500 mm︱plate thickness 2,5 mm︱distance between columns 2550 mm︱cutting angle 1,5 °︱cutting strokes max. 35 p.Min.︱back stop - adjustable 500 mm︱total power requirement 3 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,9 x 1,4 x 1,16 m︱foot operated switch
            sheet width 2500 mm
            plate thickness 2,5 mm
            distance between columns 2550 mm
            cutting angle 1,5 °
            cutting strokes max. 35 p.Min.
            back stop - adjustable 500 mm
            total power requirement 3 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,9 x 1,4 x 1,16 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical CIDAN MS-X2050/4,0


          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland

          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-0223351 · Plate Shear - Mechanical

          CIDAN - MS-X2050/4,0 - - 1995 - Elgo P71

          Technical details
          sheet width 2000 mm︱plate thickness 4 mm︱distance between columns 2050 mm︱cutting length 2000 mm︱cutting thickness steel 4 mm︱cutting gap adjustment fest/0,05 mm︱ fest/2° ︱Traverse area 1000 mm︱ Elgo P71 ︱Dimensions of machine: ︱length 2600 mm︱width 2300 mm︱height 1500 mm︱control Elgo P71 ︱total power requirement 5 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2,6x2,3x1,5 m︱
            sheet width 2000 mm
            plate thickness 4 mm
            distance between columns 2050 mm
            cutting length 2000 mm
            cutting thickness steel 4 mm
            cutting gap adjustment fest/0,05 mm
            fest/2°
            Traverse area 1000 mm
            Elgo P71
            length 2600 mm
            width 2300 mm
            height 1500 mm
            control Elgo P71
            total power requirement 5 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2,6x2,3x1,5 m


        • B&R Service GmbH
        • Esslingerstr.8
        • 73776 Altbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical STROJARNE PIESOK NTC 2000/2,5


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325132 · Plate Shear - Mechanical

          STROJARNE PIESOK - NTC 2000/2,5 - - 1992 -

          Technical details
          sheet width 2050 mm︱plate thickness 2,5 mm︱thickness at "Niro-steel" 2,0 mm︱no. of strokes 75 Hub/min︱cutting angle 2°30 °︱engine output 3,0 kW︱table height 810 mm︱weight of the machine ca. 2400 kg.︱range L-W-H 2600 x 1385 x 1600 mm︱
          Furnishing: - electrical backgauge, with analog display - Stop can be folded up - for longer sheet metal strips - welded monoblock steel construction - Special steel knives that can be used on both sides, hardened - Control panel and mechanical stroke counter - manual cutting gap adjustment - 3x support arms - foot switch * Machinevideo : https://www.youtube.com/watch?v=nkZfJ0M5H_U
            sheet width 2050 mm
            plate thickness 2,5 mm
            thickness at "Niro-steel" 2,0 mm
            no. of strokes 75 Hub/min
            cutting angle 2°30 °
            engine output 3,0 kW
            table height 810 mm
            weight of the machine ca. 2400 kg.
            range L-W-H 2600 x 1385 x 1600 mm
            Description :
            Furnishing:
            - electrical backgauge, with analog display
            - Stop can be folded up - for longer sheet metal strips
            - welded monoblock steel construction
            - Special steel knives that can be used on both sides, hardened
            - Control panel and mechanical stroke counter
            - manual cutting gap adjustment
            - 3x support arms
            - foot switch

            * Machinevideo :
            https://www.youtube.com/watch?v=nkZfJ0M5H_U


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical FASTI 506-10-2,5


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94168 · Plate Shear - Mechanical

          FASTI - 506-10-2,5 - - 1991 -

          Technical details
          sheet width 1030 mm︱plate thickness 2,50 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 0,80 t︱dimensions of the machine ca. m︱
          Manually adjustable back gauge up to 530 mm Cutting angle adjustment Side stop and table extension Knife sharpened
            sheet width 1030 mm
            plate thickness 2,50 mm
            weight of the machine ca. 0,80 t
            Description :
            Manually adjustable back gauge up to 530 mm
            Cutting angle adjustment
            Side stop and table extension
            Knife sharpened


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •