Stamping and Punching Machine

sheet width 3100 mm︱plate thickness 10.0 mm︱thickness at "Niro-steel" 6.0 mm︱cutting angle 1.8 °︱no. of strokes 14 Hub/min︱down holder 15 Stück︱work height max. 805 mm︱Column width 3515 mm︱Control CYBTOUCH 8 ︱oil volume 250 l︱voltage 400 V︱engine output 22.0 kW︱weight 9000 kg︱range L-W-H 4110 x 2200 x 2100 mm︱

---

** well maintained condition - built in 2019 (!!) ** New price ~ 55.000 euros ** Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit CYBELEC "CYBTOUCH 8" ("touchscreen") * Anti-reflective, robust color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1,000 mm - Self-regulating hold-down pressure - electro-motoric cutting gap adjustment - Light barrier for the backgauge area - 1x stable side stop - 2x front support arms - wide sheet metal supports with ball rollers - mobile foot switch with EMERGENCY STOP function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - Operation manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325351

sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱cutting angle 2,0 °︱no. of strokes 15 Hub/min︱back stop - adjustable max. 1000 mm︱down holder 14 Stück︱work height max. 865 mm︱Column width 3515 mm︱throat 50.0 mm︱Control D-Touch 7 ︱oil volume 200 l︱engine output 15.0 kW︱voltage 400 V︱weight 7.650 kg︱range L-W-H 4110 x 2200 x 2100 mm︱

---

** from a maintenance workshop (vehicle construction) ** maintained condition (!!) ** New price ~ 41.000 euros ** Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325322

sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱down holder 14 Stück︱no. of strokes 20 Hub/min︱cutting angle 1.2 °︱control CYBTOUCH 6 ︱work height max. 800 mm︱oil volume 150 ltr.︱total power requirement 11.0 kW︱weight 7060 kg︱range L-W-H 4000 x 2410 x 1610 mm︱

---

** well maintained condition (!!) ** current new price approx. 42.000 euros ** Special price on request -------------------------------------------------- Robust electro-hydraulic CNC swing cutting shears * including CYBELEC CNC touch screen control * including CNC electro-hydraulic cutting gap adjustment -------------------------------------------------- Furnishing: - CNC electro-hydraulic swing cutting shear - including CYBELEC CNC touch screen controller, model “CybTouch 6” - some functions of the CNC control: * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material selection, including sheet thickness * Cutting line lighting (cutting on outline) .. and many more - motorized back gauge, travel = 5.0 - 1.000 mm (X axis) * on ball screws * Automatically folds up at maximum travel distance, for longer cuts * including retraction function selectable ("swing-away function") * Positioning accuracy 0.10 mm * Travel speed 80 mm/sec. - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in the front support table - hinged finger protection, with safety switch * Finger protection with viewing windows for cutting after cracking - Section line lighting with silhouette - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - freely movable foot switch - CE mark/declaration of conformity - Operating instructions + circuit diagram + hydraulic diagram * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325339

sheet width 3100 mm︱plate thickness 10.0 mm︱thickness at "Niro-steel" 6.0 mm︱cutting angle 2.0 °︱down holder 14 Stück︱no. of strokes 13 - 18 Hub/min︱back stop - adjustable 1000 mm︱Control ELGO P40T ︱column arm 250 mm︱oil volume 265 l︱engine output 22,0 kW︱weight 9600 kg︱range L-W-H 4700 x 2300 x 2200 mm︱

---

** New price from 56.000 euros ** Special price on request Furnishing: - electro-hydraulic sheet metal plate shears "oscillating cut" - ELGO NC control - model "P40T Touch", front left control panel - CNC electro-motorized back gauge, with ball screws * including retraction function selectable * Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSLER rear protection device - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325300

sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱no. of strokes 15 Hub/min︱cutting angle 2,0 °︱back stop - adjustable max. 1000 mm︱down holder 14 Stück︱work height max. 865 mm︱Column width 3515 mm︱throat 50.0 mm︱Control D-Touch 7 ︱oil volume 200 l︱engine output 15.0 kW︱voltage 400 V︱weight 7.650 kg︱range L-W-H 4110 x 2200 x 2100 mm︱

---

** well-maintained / like new condition (!!) ** New price ~ 45.000 euros ** Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - original instruction manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325340

sheet width 3100 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱no. of strokes 13 Hub/min︱cutting angle 1°50 ︱control ENC 100M ︱table width 580 mm︱throat 50,0 mm︱total power requirement 22,0 KW︱weight 9300 kg︱range L-W-H 4200 x 2250 x 2100 mm︱

---

** from a maintenance workshop ** New price ~ 55.000 euros -------------------------------------------------- robust electro-hydraulic oscillating shears * with DURMA ENC 100M NC control * Manual cutting gap adjustment, via eccentric -------------------------------------------------- Furnishing: - electro-hydraulic oscillating shears - with DURMA ENC 100M control * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * Swivel control, left front - motorized backgauge, travel = 1.000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - Manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x side stop 1.500 mm - 2x front support arms 1.000 mm - Ball transfer units in the front support table - hinged finger guard, with safety switch - Light barrier behind the machine (safety device) - free-moving footswitch - CE mark/Declaration of Conformity

sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 3120 mm︱down holder 16 Stück︱oil volume 200 ltr.︱cutting angle 1° 30 ︱no. of strokes 15 Hub/min︱control ENC 100 ︱table width 500 mm︱throat 50.0 mm︱Number of working hours 912 h︱total power requirement 15.0 KW︱weight 7650 kg︱range L-W-H 3810 x 2200 x 2050 mm︱

---

** from a maintenance workshop (!!) ** very good / well-maintained condition (as new) ** with only 912 operating hours ** current new price ~ 45.000 euros ** Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear * with DURMA ENC 100M control * manual cutting gap adjustment * Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA "ENC 100M" NC control unit * Backgauge preselection - X axis * Number of pieces * Cutting length limitation * swiveling operation, left front - electro-motorized back gauge, travel = 1,000 mm (X axis) * on ball screws * Travel speed 200 mm/sec. - manual cutting gap adjustment, via eccentric adjustment - hydraulic hold-down devices - 1x front side stop .. 1.500 mm - 2x front support arms .. 1.500 mm - Ball rollers in the front support table - hinged finger protection, with safety switch - Light barrier behind the machine (safety device) - 1x freely movable foot switch - original instruction manual * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325330

sheet width 3060 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control DAC 310 ︱total power requirement 11.0 kW︱weight 5450 kg︱range L-W-H 3800 x 1940 x 1560 mm︱

---

Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model “DAC 310” * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Speed 100 mm/sec - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - original operating instructions including CE declaration ** Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts - electro-motoric cutting gap adjustment Machinelink: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325325

sheet width 3200 mm︱plate thickness 0.5 - 6.0 mm︱cutting angle 1° 30 °︱no. of strokes 14 Hub/min︱back stop - adjustable max. 1000 mm︱down holder 13 Stück︱work height max. 800 mm︱Control "EASY-VIEW" ︱oil volume 270 l︱voltage 400 V︱engine output 7.5 kW︱weight 6100 kg︱range L-W-H 4010 x 1610 x 1620 mm︱

---

** from a maintenance workshop - good condition (!!) ** was only used sporadically according to the previous seller ** New price ~ 35.000 euros Furnishing: - electro-hydraulic swing cutting shears - KNUTH "EASY-VIEW" touch CNC positioning control * Robust back gauge with high-quality ball screws - Machine frame & knife bar made of sturdy welded construction - The proven swing-cut design allows for a small knife angle * for optimal cutting quality and minimal distortion on the workpiece - hydraulically acting hold-down devices - electro-motoric cutting gap adjustment - continuous adjustment of the cutting length for short strokes - Machine side stand with projection - 1x long side stop, including tilting cam and mm scale - 3x front support arms - Support table including ball rollers - rear protective device (safety doors) - front finger/encroachment protection - 1x freely movable foot switch including emergency stop button - "CE" marking - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325321

sheet width 3050 mm︱plate thickness 12.0 mm ST︱plate thickness 8.0 mm VA︱no. of strokes 7 - 14 Hub/min︱down holder 18 Stück︱cutting angle 0.5 - 3.0 °︱work height max. 930 mm︱back stop - adjustable 1000 mm︱Control SP 8 ︱total power requirement 22.5 kW︱weight 8500 kg︱range L-W-H 4180 x 2030 x 2210 mm︱

---

Furnishing: - electro-hydraulic & slide-guided guillotine shears - including HACO NC machine control SP 8 * Pre-selection positioning from the backgauge * Digital display of actual value * Electro-hydraulic cutting angle adjustment with digital display * programmable retraction from the backgauge * Programmable cutting length limit * Emergency switch - electro-motorized back gauge, on ball screws - manual cutting gap adjustment, adjustable from the rear - Finger protection at the front - 1x side stop .. 1.000 mm - Protective device behind the machine - rear sheet metal slide - 1x freely movable foot switch - User manual (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325332

sheet width 3050 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱cutting angle adjustment 0,5 - 2,5 °︱cutting gap adjustment 0,05 - 1,0 mm︱back stop - adjustable 10 - 1000 mm︱adjustment speed 180 mm/s︱down holder 14 Stück︱strokes per minute 12 - 25 ︱oil volume 300 Liter︱0 max. 300 bar︱voltage 400 V︱main drive 18,5 kW︱weight of the machine ca. 10.000 kg.︱dimensions of the machine ca. 4080 x 2350 x 2060 mm︱

---

** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325292

sheet width 3060 mm︱plate thickness 8.0 mm︱thickness at "Niro-steel" 6.0 mm︱distance between columns 3100 mm︱down holder 16 Stück︱no. of strokes 10 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Number of working hours ca. 2.100 h︱back stop - adjustable 6.0 - 750 mm︱Control ︱total power requirement 18.5 kW︱weight 6300 kg︱range L-W-H 3900 x 2300 x 1630 mm︱

---

** from a maintenance workshop ** hardly used - only approx. 2.100 operating hours (!!) ** New price approx. 40.000 euros ** Special price on request Furnishing: - electro-hydraulic swing cutting shears - ELGO digital display model P9521, for electric back gauge * Travel distance back gauge X = 750 mm * Backlash-free ball screw for back gauge * Back gauge beam can be automatically tilted up to maximum position * for pushing extra long sheets through * Travel speed 100 mm/sec - 1x stable side stop * with T-slot, flip stop and millimeter scale - 2x front, stable support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * Can be operated centrally on the right side stand - front support plates with ball rollers - front finger/intervention protection - Tip operation with push buttons on the control panel on the left - Protective grille = safety device behind the machine - original operating instructions including CE declaration * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325329

sheet width 3060 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱back stop - adjustable 5,0 - 1000 mm︱work height max. ca. 820 mm︱cutting angle 2,4 °︱stroke 7-12 p/min.︱down holder 14 Stück︱operating pressure 360 bar︱Control ELGO ︱oil volume 200 ltr.︱voltage 400 V︱total power requirement 22,0 kW︱weight 9000 kg︱range L-W-H 4000 x 2300 x 2000 mm︱

---

Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm * zero-backlash ball screw for backgauge * Backstop beam can be automatically tilted up in max. position * Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - front finger protection - Tip operation with push buttons on the control panel - free-moving footswitch - User manual (PDF)

sheet width 3050 mm︱plate thickness 6,35 mm︱thickness at "Niro-steel" 4,0 mm︱down holder 16 Stück︱table length 575 mm︱Control AMADA ︱cutting angle 40° - 2°20 °︱0 305 bar︱oil volume 100 ltr.︱total power requirement 5,5 kW︱weight of the machine ca. 6150 kg︱range L-W-H 3790 x 2090 x 1860 mm︱

---

** maintained condition (!!) Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line * Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind the machine - 1x freely movable foot switch - Clippings waste container - original instruction manual ** Special accessories: - AMADA electro-pneumatic sheet metal holding device for thin sheet metal blanks

sheet width 2560 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱distance between columns 2600 mm︱down holder 12 Stück︱no. of strokes 20 Hub/min︱oil volume 160 ltr.︱cutting angle 1.6 °︱Control ELGO TYP 71 ︱back stop - adjustable max. 750 mm︱total power requirement 11.37 kW︱weight 3800 kg︱range L-W-H 3030 x 1910 x 1510 mm︱

---

** Current new price approx. 37.000 euros ** Special price on request Furnishing: - Robust electric hydraulic swing cutter - Elgo type 71 digital control unit * Driving back stop x = 750 mm * play -free ball circuit spindle for back attack * Speed 100 mm/sec - 1x side stop * with a t-groove, flip stop and millimeter scale - 2x front reversing arms - Electrical cutting length limit * Cutting length limitation to increase the number of lifts/min. - Manual interpretation - front finger/intervention protection - TIP operation with push buttons on the switch on the left - original operating instructions * Machinelink: https://mhp.logotech.de/hpm/v7/datenblatt/datenblatt.php?machineno=1008-9325326

sheet width 1250 mm︱plate thickness 16.0 mm︱thickness at "Niro-steel" 10,0 mm︱blade length 1300 mm︱cutting angle 2-3 Grad︱no. of strokes 13 Hub/min︱back stop - adjustable 500 mm︱Control konv. ︱table height 810 mm︱blade length 1300 mm︱oil volume 350 l︱engine output 18.5 kW︱weight 3900 kg︱range L-W-H 2150 x 1200 x 1900 mm︱

---

** Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - hydraulic cutting angle adjustment - manual cutting gap adjustment - 2x side stop, with mm scale and T-slot - Foot switch for lifting version - rear sheet metal slide - 2x side/rear protective grilles - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325319

sheet width 3050 mm︱plate thickness 6,0 mm︱cutting angle 0,5 - 3,0 °︱down holder 18 Stück︱no. of strokes 9 / 14 Hub/min︱back stop - adjustable max. 750 mm︱Control konv. ︱engine output 10,0 kW︱weight 4800 kg︱range L-W-H 3750 x 1600 x 2450 mm︱

---

Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x extra long, robust side stop .. 3,000 mm - 1x extra long, robust support arm - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325333

sheet width - max. 2035 mm︱plate thickness 6.0 mm ST︱plate thickness 4.0 mm VA︱plate thickness 8.0 mm ALU︱number of strokes - loaded 20 Hübe/min︱cutting angle 1.7 °︱work height max. 900 mm︱Number of working hours 1.450 h︱Control LENORD ︱total power requirement 11.0 kW︱weight of the machine ca. 4100 kg︱range L-W-H 2416 x 2250 x 1760 mm︱

---

** Machine from prototype construction ** Machine with only approx. 1.450 operating hours (!!) Furnishing: - electro-hydraulic guillotine shears - electro-motorized backgauge * with NC control unit (Lenord + Bauer) - electrical cutting length limitation - manual cutting gap adjustment - 1x stable side stop, with scale and tilting cam - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF) + circuit diagram * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325342

sheet width 3050 mm︱plate thickness 6.0 mm︱cutting angle 0.5 - 3.0 °︱down holder 18 Stück︱no. of strokes 9 / 14 Hub/min︱back stop - adjustable 750 mm︱Control SC7p ︱engine output 10.0 kW︱weight 4800 kg︱range L-W-H 3750 x 1600 x 2450 mm︱

---

** from a maintenance workshop ** well maintained condition - checked annually (!!) Furnishing: - electro-hydraulic sheet metal shears - "backdrop-guided" - ATLANTIC NC control unit - model "SC7p" * Target / actual information about the motorized back gauge * Manual positioning possible via handwheel * Digital display for backgauge position * electro-hydraulic cutting angle adjustment * Adjustable retraction from the back gauge before the start of the cut * Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Finger protection at the front - EMERGENCY stop button at the front - rear sheet metal slides - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325328

sheet width 3100 mm︱plate thickness 6.35 mm︱thickness at "Niro-steel" 4.00 mm︱cutting angle 0.5 - 2.5 °︱no. of strokes 12 - 50 Hub/min︱Control konv. ︱oil volume 120 ltr.︱back stop - adjustable max. 750 mm︱engine output 7.5 kW︱weight 4800 kg.︱range L-W-H 3950 x 1950 x 1680 mm︱

---

** good / well-maintained condition (!!) Furnishing: - electro-hydraulic, gate-guided guillotine shears - Electric back gauge with analogue position display - electrical cutting angle adjustment - manual cutting gap adjustment, from behind - Control unit + control cabinet at the front left - 1x extra long side stop - 2x support arms - front finger protection - rear sheet metal slide - 1x freely movable foot switch - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325347

sheet width 3050 mm︱plate thickness 12,0 mm ST︱plate thickness 8,0 mm VA︱no. of strokes 7 - 14 Hub/min︱down holder 18 Stück︱cutting angle 0,5 - 3,0 °︱work height max. 930 mm︱back stop - adjustable 1000 mm︱Number of working hours 18.822 h︱total power requirement 22,5 kW︱weight 8.500 kg︱range L-W-H 4180 x 2030 x 2210 mm︱

---

Furnishing: - Robust hydraulic, link-guided guillotine shears - Electro-motor backgauge * with analogue display * Fine adjustment via hand wheel, front left - Control panel, front left - manual cutting gap adjustment, from behind - electro-hydraulic cutting angle adjustment - Front finger protection - Stable front support table - 1x side stop with T-slot and millimeter scale - 3x support arms - 1x free moving footswitch - User manual (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325234

sheet width - max. 1255 mm︱plate thickness 4,0 mm ST︱plate thickness 2,0 mm VA︱plate thickness 6,0 mm ALU︱number of strokes - loaded ~ 66 Hübe/min.︱cutting angle 1,5 °︱total power requirement 5,5 kW︱weight of the machine ca. 2600 kg.︱range L-W-H 2300 x 1800 x 1800 mm︱

---

** Machine from a technical college - prototype construction ** very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325278

sheet width 4100 mm︱plate thickness 10,0 mm︱thickness at "Niro-steel" 6,0 mm︱down holder 28 Stück︱no. of strokes 18 Hub/min︱oil volume 260 ltr.︱cutting angle 0,5 - 2 °︱control CYBELEC Cybtouch︱engine output 22,0 kW︱back stop - adjustable 1000 mm︱range L-W-H 6100 x 2580 x 2460 mm︱weight 15.100 kg.︱

---

-------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German ** including special equipment: - pneumatic sheet metal holding device * Monoblock design

sheet width 3100 mm︱plate thickness 13,0 mm︱thickness at "Niro-steel" 8,0 mm︱down holder 14 Stück︱no. of strokes 11 - 20 Hub/min︱oil volume 310 ltr.︱cutting angle 0,05 - 2,0 °︱throat 350 mm︱table height 900 mm︱total power requirement 22,0 kW︱weight of the machine ca. 13.300 kg︱range L-W-H 5.110 x 2.570 x 2.400 mm︱

---

-------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German