Plate Shear - Hydraulic
Machinelist: Plate Shear - Hydraulic
Plate Shear - Hydraulic
- Christoph Busch GmbH
- Dieselstr. 22
- 41352 Korschenbroich
- Deutschland
-
+49 (0) 2182 570 5930
+49 (0) 2182 5785202 -
mail@busch-gruppe.de
www.busch-gruppe.de
#2052-06335 · Plate Shear - Hydraulic
LIPTOVSKE STROJARNE - Lg hn 3150/16 - - 1999 -
Technical details
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94145 · Plate Shear - Hydraulic
BAYKAL - MGH 3100/10 - - 1998 - ELGO
Technical details
Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm * zero-backlash ball screw for backgauge * Backstop beam can be automatically tilted up in max. position * Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - front finger protection - Tip operation with push buttons on the control panel - free-moving footswitch - User manual (PDF)
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9325287 · Plate Shear - Hydraulic
BAYKAL - MGH 3100/10 - - 1998 - ELGO
Technical details
Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm * zero-backlash ball screw for backgauge * Backstop beam can be automatically tilted up in max. position * Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation * Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment * centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - front finger protection - Tip operation with push buttons on the control panel - free-moving footswitch - User manual (PDF)
Datasheet
Request / Contact
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94078 · Plate Shear - Hydraulic
HERA - TS 3 - - 1998 -
Technical details
Furnishing • Controlled backgauge 1000mm • SIMATIC OP7 controller • Finger protection • Angle stop 1000mm • Support arm • Manual cutting gap adjustment
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94077 · Plate Shear - Hydraulic
FASTI - 509-30/10 - - 1998 -
Technical details
• Controlled back gauge 10 - 1000 mm • Angle stop 1600 mm • 3 additional support arms • Automatic cutting gap adjustment • Automatic cutting angle adjustment • Cutting edge lighting • Cutting length limit
- Hans Klein Werkzeugmaschinenhandel GmbH
- Im Mühlgut 2-4
- 77815 Bühl
- Deutschland
-
0049 (0) 7223 9617-0
0049 (0) 7223 58512 -
info@klein-werkzeugmaschinen.de
www.klein-werkzeugmaschinen.de
#1052-01245 · Plate Shear - Hydraulic
ATLANTIC - ATS 3000 - - 1997 -
Technical details
Accessories: electr. back stop, angle front stop, table extensions, spare knives
Datasheet
Request / Contact
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-4011159 · Plate Shear - Hydraulic
EHT - EcoCut 16-31 - - 1997 -
Technical details
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-93965 · Plate Shear - Hydraulic
FASTI - 510-30/10 - - 1996 - FASTI NC
Technical details
Furnishing: - Guided hydraulic NC guillotine shears - FASTI NC Touch control NT 20S, swiveling front left - electro/hydraulic cutting gap adjustment - electro/hydraulic cutting angle adjustment - electric back gauge * Travel from 10 - 1,000 mm - welded scissor table - hydraulic hold-down clamps arranged directly on the cutting edge - 1x side stop 1,500 mm, with scale and tilt stop - 3x front support arms, each 1,000 mm - rear protection - front guard = finger guard - free-moving footswitch - Machine documentation
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-12338 · Plate Shear - Hydraulic
OMAG - ES 36 - - 1996 -
Technical details
Hydraulic plate shears with cutting angle adjustment and back gauge with 2 speeds. Higher quality knives for stainless steel processing. The cutting performance refers to 380 N/mm² strength. The machine was used in a well-kept small business to produce special stainless steel parts for kitchens, laboratories and clinics and was only operated by the owner. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-03644 · Plate Shear - Hydraulic
EHT - TSS 6-60 - - 1995 - Elgo 87 P2
Technical details
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9325317 · Plate Shear - Hydraulic
AMADA - GPX 630 - - 1995 - AMADA
Technical details
** maintained condition (!!) Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line * Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind the machine - 1x freely movable foot switch - Clippings waste container - original instruction manual ** Special accessories: - AMADA electro-pneumatic sheet metal holding device for thin sheet metal blanks
Datasheet
Request / Contact
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94152 · Plate Shear - Hydraulic
AMADA - GPX 630 - - 1995 - AMADA
Technical details
** maintained condition (!!) Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line * Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind the machine - 1x freely movable foot switch - Clippings waste container - original instruction manual ** Special accessories: - AMADA electro-pneumatic sheet metal holding device for thin sheet metal blanks
- SKM Industriemaschinen
- Röntgenstr. 3
- 89264 Weißenhorn
- Deutschland
-
+49 (0) 7309 954 986 0
+49 (0) 7309 954 986 1 -
info@skm-maschinen.de
www.skm-maschinen.de
#2032-1735 · Plate Shear - Hydraulic
ATLANTIC / HACO - XTSL 3000 - - 1995 - SC5
Technical details
- motorized backgauge - Electric cutting gap adjustment - electric Cutting angle adjustment - Footswitch - Front support arms 2.60 m. - pneumatic lifting device - Spare knife - Rear area monitoring optical sensor
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-1922 · Plate Shear - Hydraulic
HESSE by DURMA - JDHGM 3006 - - 1995 -
Technical details
Swing cut version mot. Backgauge range 1000 mm with Elgo digital display Section column setting 1 Side stop 1000 mm withDimensional scale 2 support arms Foot pedal Rear protective grids with light barriers Cutting line illumination Cut number: 19 1/min Knives were resharpened User Manual in German CORRESPONDS TO THE GERMAN UVV AND THE AUSTRIAN AMVO
Datasheet
Request / Contact
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-4010895 · Plate Shear - Hydraulic
MENGELE - S 6-3000 - - 1995 -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-4011106 · Plate Shear - Hydraulic
CMU - 3EO.47/63 - - 1995 -
Technical details
Equipment/accessories: - 1 x set of knives
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-4011179 · Plate Shear - Hydraulic
BLEMAS - TK 3000 x 16 - - 1995 -
Technical details
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9325326 · Plate Shear - Hydraulic
BAYKAL - HGL 2600/6 - - 1994 - ELGO TYP 71
Technical details
** Current new price approx. 37.000 euros ** Special price on request Furnishing: - Robust electric hydraulic swing cutter - Elgo type 71 digital control unit * Driving back stop x = 750 mm * play -free ball circuit spindle for back attack * Speed 100 mm/sec - 1x side stop * with a t-groove, flip stop and millimeter scale - 2x front reversing arms - Electrical cutting length limit * Cutting length limitation to increase the number of lifts/min. - Manual interpretation - front finger/intervention protection - TIP operation with push buttons on the switch on the left - original operating instructions * Machinelink: https://mhp.logotech.de/hpm/v7/datenblatt/datenblatt.php?machineno=1008-9325326
Datasheet
Request / Contact
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94155 · Plate Shear - Hydraulic
BAYKAL - HGL 2600/6 - - 1994 - ELGO TYP 71
Technical details
** Current new price approx. 37.000 euros ** Special price on request Furnishing: - Robust electric hydraulic swing cutter - Elgo type 71 digital control unit * Driving back stop x = 750 mm * play -free ball circuit spindle for back attack * Speed 100 mm/sec - 1x side stop * with a t-groove, flip stop and millimeter scale - 2x front reversing arms - Electrical cutting length limit * Cutting length limitation to increase the number of lifts/min. - Manual interpretation - front finger/intervention protection - TIP operation with push buttons on the switch on the left - original operating instructions
- WMT GmbH & Co.KG
- Siemensstraße 1
- 46342 Velen-Ramsdorf
- Deutschland
-
+49 2863 92477-47
+49 2863 92477-50 -
info@w-m-t.de
www.w-m-t.de
#1108-14297 · Plate Shear - Hydraulic
GWF - S16 - 3000 - - 1994 -
Technical details
Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94173 · Plate Shear - Hydraulic
HACO - HSLX 3000x6 - - 1994 -
Technical details
• Automatic cutting angle adjustment • Automatic cutting gap adjustment • Cutting line lighting • Support arms • Knife with 4 cutting edges • Cutting length limitation • CNC back gauge 705mm adjustment range 705 mm • Angle stop • Operation manual
- Karl Günter Wirths GmbH
- Scharpenberger Strasse 96-98
- 58256 Ennepetal
- Deutschland
-
02333-79050
02333-790555 -
sales@wirths.net
www.wirths.net
#1041-18181 · Plate Shear - Hydraulic
STEINER - HTS 30/16 - - 1994 -
Technical details
Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-A2025 · Plate Shear - Hydraulic
EHT - TSS 20-25 - - 1994 -
Technical details
Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-18181 · Plate Shear - Hydraulic
STEINER - HTS 30/16 - - 1994 -
Technical details
Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor
Datasheet
Request / Contact
TOP Manufacturer:
ERMAK - BAYKAL - HESSE BY DURMA - ASSISTMACH - RABBA - EHT - FASTI - ATLANTIC - SAFAN - LVD -