'
Європейська мережа дилерів акціонерної техніки
+ 49 (0) 2389 5299080
Пошукова служба Продаємо старі машини

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:
             вид: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          1. machine-categorie:
          2. Metal Processing
          3. Sheet metal working - shaeres - bending
          4. Plate Shear - Hydraulic

          Plate Shear - Hydraulic

          Machinelist: Plate Shear - Hydraulic

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 20-25

          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland
          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A2025 · Plate Shear - Hydraulic

          EHT - TSS 20-25 - - 1994 -

          Technical details
          sheet width / mm︱plate thickness / mm︱distance between columns / mm︱
          Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment
            sheet width / mm
            plate thickness / mm
            distance between columns / mm
            Description :
            Manufacturer: EHT
            Type: TSS 20-25
            Year of construction: 1994
            Max. Cutting length: 2250 mm
            Max. Sheet thickness: 20 mm
            Strip width min / max: 10/1000 mm
            Distance between the consoles: 2530
            Height above the ground: 900 mm
            Table length without extension arms: 3030 mm
            Oil volume: 800 l
            Max. Pressure: 280 bar
            Operating voltage: 400V
            Control voltage: 230 V.
            Nominal current: 87 A.
            Weight: 15.8 to
            Dimensions L x W x H: 3500 x 2500 x 2400 mm

            Accessories / special equipment
            Pneumatic cutting gap adjustment
            Cutting length limitation
            Roller conveyor elevation bracket
            Hand protection 1 bay
            Multitron control Multitron PS 80; ELCO 85 P
            Lower knife height adjustment



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STEINER HTS 30/16

          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland
          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-18181 · Plate Shear - Hydraulic

          STEINER - HTS 30/16 - - 1994 -

          Technical details
          sheet width 3000 mm︱plate thickness 16 mm︱distance between columns 3200 mm︱throat 310 mm︱stroke 300 mm︱table width 820 mm︱table height over floor 1215 mm︱Number of downholders 12 St.︱cutting angle 0,5 - 2,5 °︱total power requirement 30 kW︱weight of the machine ca. 19 t︱
          Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor
            sheet width 3000 mm
            plate thickness 16 mm
            distance between columns 3200 mm
            throat 310 mm
            stroke 300 mm
            table width 820 mm
            table height over floor 1215 mm
            Number of downholders 12 St.
            cutting angle 0,5 - 2,5 °
            total power requirement 30 kW
            weight of the machine ca. 19 t
            Description :
            Machine was overhauled in 2010 and was modernized with light barrier at table.
            Machine will be sold with automatic back stop with DRO.

            including flat belt conveyor


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FASTI 509-40-4

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94064 · Plate Shear - Hydraulic

          FASTI - 509-40-4 - - 1993 -

          Technical details
          sheet width 4000 mm︱plate thickness 4,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 8,50 t︱dimensions of the machine ca. m︱
          Controlled back gauge up to 1,000 mm Side stop and table extensions cutting length limitation cutting edge lighting Protective fence, rollable with safety switches
            sheet width 4000 mm
            plate thickness 4,00 mm
            weight of the machine ca. 8,50 t
            Description :
            Controlled back gauge up to 1,000 mm
            Side stop and table extensions
            cutting length limitation
            cutting edge lighting
            Protective fence, rollable with safety switches


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 16/1250

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94154 · Plate Shear - Hydraulic

          RABBA - HS 16/1250 - - 1993 - konv.

          Technical details
          sheet width 1250 mm︱plate thickness 16,00 mm︱thickness at "Niro-steel" 10,00 mm︱blade length 1300 mm︱cutting angle 2-3 Grad︱no. of strokes 13 Hub/min︱back stop - adjustable 500 mm︱Control konv. ︱table height 810 mm︱blade length 1300 mm︱oil volume 350 l︱engine output 18.5 kW︱weight 3900 kg︱range L-W-H 2150 x 1200 x 1900 mm︱
          ** Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - hydraulic cutting angle adjustment - manual cutting gap adjustment - 2x side stop, with mm scale and T-slot - Foot switch for lifting version - rear sheet metal slide - 2x side/rear protective grilles - original instruction manual
            sheet width 1250 mm
            plate thickness 16,00 mm
            thickness at "Niro-steel" 10,00 mm
            blade length 1300 mm
            cutting angle 2-3 Grad
            no. of strokes 13 Hub/min
            back stop - adjustable 500 mm
            Control konv.
            table height 810 mm
            blade length 1300 mm
            oil volume 350 l
            engine output 18.5 kW
            weight 3900 kg
            range L-W-H 2150 x 1200 x 1900 mm
            Description :
            ** Machine from a maintenance workshop (!)

            Furnishing:
            - heavy / robust electro-hydraulic sheet metal plate shears
            - Machine body in a closed design as an all-steel welded construction
            - Knife upper cheek slides in a long downward direction over the knife edge
            .. protruding plastic guides
            - Cutting is done hydraulically via two hydraulic cylinders
            - The upper beam returns to its starting position in two ways
            .. Spring batteries on the side stands
            - manual back gauge, adjustable from the rear
            * Adjustment by handwheel, with mm scale
            - hydraulic cutting angle adjustment
            - manual cutting gap adjustment
            - 2x side stop, with mm scale and T-slot
            - Foot switch for lifting version
            - rear sheet metal slide
            - 2x side/rear protective grilles
            - original instruction manual




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RABBA HS 16/1250

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325319 · Plate Shear - Hydraulic

          RABBA - HS 16/1250 - - 1993 - konv.

          Technical details
          sheet width 1250 mm︱plate thickness 16.0 mm︱thickness at "Niro-steel" 10,0 mm︱blade length 1300 mm︱cutting angle 2-3 Grad︱no. of strokes 13 Hub/min︱back stop - adjustable 500 mm︱Control konv. ︱table height 810 mm︱blade length 1300 mm︱oil volume 350 l︱engine output 18.5 kW︱weight 3900 kg︱range L-W-H 2150 x 1200 x 1900 mm︱
          ** Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - hydraulic cutting angle adjustment - manual cutting gap adjustment - 2x side stop, with mm scale and T-slot - Foot switch for lifting version - rear sheet metal slide - 2x side/rear protective grilles - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325319
            sheet width 1250 mm
            plate thickness 16.0 mm
            thickness at "Niro-steel" 10,0 mm
            blade length 1300 mm
            cutting angle 2-3 Grad
            no. of strokes 13 Hub/min
            back stop - adjustable 500 mm
            Control konv.
            table height 810 mm
            blade length 1300 mm
            oil volume 350 l
            engine output 18.5 kW
            weight 3900 kg
            range L-W-H 2150 x 1200 x 1900 mm
            Description :
            ** Machine from a maintenance workshop (!)

            Furnishing:
            - heavy / robust electro-hydraulic sheet metal plate shears
            - Machine body in a closed design as an all-steel welded construction
            - Knife upper cheek slides in a long downward direction over the knife edge
            .. protruding plastic guides
            - Cutting is done hydraulically via two hydraulic cylinders
            - The upper beam returns to its starting position in two ways
            .. Spring batteries on the side stands
            - manual back gauge, adjustable from the rear
            * Adjustment by handwheel, with mm scale
            - hydraulic cutting angle adjustment
            - manual cutting gap adjustment
            - 2x side stop, with mm scale and T-slot
            - Foot switch for lifting version
            - rear sheet metal slide
            - 2x side/rear protective grilles
            - original instruction manual

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325319


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC ATS 3000

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325333 · Plate Shear - Hydraulic

          ATLANTIC - ATS 3000 - - 1993 - konv.

          Technical details
          sheet width 3050 mm︱plate thickness 6,0 mm︱cutting angle 0,5 - 3,0 °︱down holder 18 Stück︱no. of strokes 9 / 14 Hub/min︱back stop - adjustable max. 750 mm︱Control konv. ︱engine output 10,0 kW︱weight 4800 kg︱range L-W-H 3750 x 1600 x 2450 mm︱
          Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x extra long, robust side stop .. 3,000 mm - 1x extra long, robust support arm - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325333
            sheet width 3050 mm
            plate thickness 6,0 mm
            cutting angle 0,5 - 3,0 °
            down holder 18 Stück
            no. of strokes 9 / 14 Hub/min
            back stop - adjustable max. 750 mm
            Control konv.
            engine output 10,0 kW
            weight 4800 kg
            range L-W-H 3750 x 1600 x 2450 mm
            Description :
            Furnishing:
            - electro-hydraulic / slide-guided sheet metal shears
            - front control panel, left - easy to use
            - with electro-hydraulic cutting angle adjustment
            - with manual cutting gap adjustment, from the rear
            - electro-motorized back gauge 10-750 mm
            - with analogue position display + handwheel for fine adjustment
            - 1x extra long, robust side stop .. 3,000 mm
            - 1x extra long, robust support arm
            - 1x freely movable foot switch
            - front finger/encroachment protection
            - 2x EMERGENCY stop buttons at the front
            - User manual (PDF)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325333


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FASTI 509-20/6

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94184 · Plate Shear - Hydraulic

          FASTI - 509-20/6 - - 1992 - LENORD

          Technical details
          sheet width - max. 2035 mm︱plate thickness 6,00 mm ST︱plate thickness 4,00 mm VA︱plate thickness 8,00 mm ALU︱number of strokes - loaded 20 Hübe/min︱cutting angle 1.7 °︱work height max. 900 mm︱Number of working hours 1.450 h︱Control LENORD ︱total power requirement 11.0 kW︱weight of the machine ca. 4100 kg︱range L-W-H 2416 x 2250 x 1760 mm︱
          ** Machine from prototype construction ** Machine with only approx. 1.450 operating hours (!!) Furnishing: - electro-hydraulic guillotine shears - electro-motorized backgauge * with NC control unit (Lenord + Bauer) - electrical cutting length limitation - manual cutting gap adjustment - 1x stable side stop, with scale and tilting cam - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF) + circuit diagram * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts
            sheet width - max. 2035 mm
            plate thickness 6,00 mm ST
            plate thickness 4,00 mm VA
            plate thickness 8,00 mm ALU
            number of strokes - loaded 20 Hübe/min
            cutting angle 1.7 °
            work height max. 900 mm
            Number of working hours 1.450 h
            Control LENORD
            total power requirement 11.0 kW
            weight of the machine ca. 4100 kg
            range L-W-H 2416 x 2250 x 1760 mm
            Description :
            ** Machine from prototype construction
            ** Machine with only approx. 1.450 operating hours (!!)

            Furnishing:
            - electro-hydraulic guillotine shears
            - electro-motorized backgauge
            * with NC control unit (Lenord + Bauer)
            - electrical cutting length limitation
            - manual cutting gap adjustment
            - 1x stable side stop, with scale and tilting cam
            - 2x front support arms
            - 1x freely movable foot switch
            - Operating instructions (PDF) + circuit diagram

            * Special accessories included:
            - pneumatic sheet metal holding device for thin sheet metal cuts




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FASTI 509-20/6

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325342 · Plate Shear - Hydraulic

          FASTI - 509-20/6 - - 1992 - LENORD

          Technical details
          sheet width - max. 2035 mm︱plate thickness 6.0 mm ST︱plate thickness 4.0 mm VA︱plate thickness 8.0 mm ALU︱number of strokes - loaded 20 Hübe/min︱cutting angle 1.7 °︱work height max. 900 mm︱Number of working hours 1.450 h︱Control LENORD ︱total power requirement 11.0 kW︱weight of the machine ca. 4100 kg︱range L-W-H 2416 x 2250 x 1760 mm︱
          ** Machine from prototype construction ** Machine with only approx. 1.450 operating hours (!!) Furnishing: - electro-hydraulic guillotine shears - electro-motorized backgauge * with NC control unit (Lenord + Bauer) - electrical cutting length limitation - manual cutting gap adjustment - 1x stable side stop, with scale and tilting cam - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF) + circuit diagram * Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325342
            sheet width - max. 2035 mm
            plate thickness 6.0 mm ST
            plate thickness 4.0 mm VA
            plate thickness 8.0 mm ALU
            number of strokes - loaded 20 Hübe/min
            cutting angle 1.7 °
            work height max. 900 mm
            Number of working hours 1.450 h
            Control LENORD
            total power requirement 11.0 kW
            weight of the machine ca. 4100 kg
            range L-W-H 2416 x 2250 x 1760 mm
            Description :
            ** Machine from prototype construction
            ** Machine with only approx. 1.450 operating hours (!!)

            Furnishing:
            - electro-hydraulic guillotine shears
            - electro-motorized backgauge
            * with NC control unit (Lenord + Bauer)
            - electrical cutting length limitation
            - manual cutting gap adjustment
            - 1x stable side stop, with scale and tilting cam
            - 2x front support arms
            - 1x freely movable foot switch
            - Operating instructions (PDF) + circuit diagram

            * Special accessories included:
            - pneumatic sheet metal holding device for thin sheet metal cuts

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325342


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC XTS 3000

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325328 · Plate Shear - Hydraulic

          ATLANTIC - XTS 3000 - - 1992 - SC7p

          Technical details
          sheet width 3050 mm︱plate thickness 6.0 mm︱cutting angle 0.5 - 3.0 °︱down holder 18 Stück︱no. of strokes 9 / 14 Hub/min︱back stop - adjustable 750 mm︱Control SC7p ︱engine output 10.0 kW︱weight 4800 kg︱range L-W-H 3750 x 1600 x 2450 mm︱
          ** from a maintenance workshop ** well maintained condition - checked annually (!!) Furnishing: - electro-hydraulic sheet metal shears - "backdrop-guided" - ATLANTIC NC control unit - model "SC7p" * Target / actual information about the motorized back gauge * Manual positioning possible via handwheel * Digital display for backgauge position * electro-hydraulic cutting angle adjustment * Adjustable retraction from the back gauge before the start of the cut * Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Finger protection at the front - EMERGENCY stop button at the front - rear sheet metal slides - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325328
            sheet width 3050 mm
            plate thickness 6.0 mm
            cutting angle 0.5 - 3.0 °
            down holder 18 Stück
            no. of strokes 9 / 14 Hub/min
            back stop - adjustable 750 mm
            Control SC7p
            engine output 10.0 kW
            weight 4800 kg
            range L-W-H 3750 x 1600 x 2450 mm
            Description :
            ** from a maintenance workshop
            ** well maintained condition - checked annually (!!)

            Furnishing:
            - electro-hydraulic sheet metal shears - "backdrop-guided"
            - ATLANTIC NC control unit - model "SC7p"
            * Target / actual information about the motorized back gauge
            * Manual positioning possible via handwheel
            * Digital display for backgauge position
            * electro-hydraulic cutting angle adjustment
            * Adjustable retraction from the back gauge before the start of the cut
            * Front left control unit
            - electro-motorized back gauge 10-750 mm
            - manual cutting gap adjustment, from the rear
            - 1x front side stop, with mm scale
            - 3x front support arms
            - 1x freely movable foot switch
            - Finger protection at the front
            - EMERGENCY stop button at the front
            - rear sheet metal slides
            - User manual (PDF)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325328


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC XTS 3000

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94161 · Plate Shear - Hydraulic

          ATLANTIC - XTS 3000 - - 1992 - SC7p

          Technical details
          sheet width 3050 mm︱plate thickness 6,00 mm︱cutting angle 0.5 - 3.0 °︱down holder 18 Stück︱no. of strokes 9 / 14 Hub/min︱back stop - adjustable 750 mm︱Control SC7p ︱engine output 10.0 kW︱weight 4800 kg︱range L-W-H 3750 x 1600 x 2450 mm︱
          ** from a maintenance workshop ** well maintained condition - checked annually (!!) Furnishing: - electro-hydraulic sheet metal shears - "backdrop-guided" - ATLANTIC NC control unit - model "SC7p" * Target / actual information about the motorized back gauge * Manual positioning possible via handwheel * Digital display for backgauge position * electro-hydraulic cutting angle adjustment * Adjustable retraction from the back gauge before the start of the cut * Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Finger protection at the front - EMERGENCY stop button at the front - rear sheet metal slides - User manual (PDF)
            sheet width 3050 mm
            plate thickness 6,00 mm
            cutting angle 0.5 - 3.0 °
            down holder 18 Stück
            no. of strokes 9 / 14 Hub/min
            back stop - adjustable 750 mm
            Control SC7p
            engine output 10.0 kW
            weight 4800 kg
            range L-W-H 3750 x 1600 x 2450 mm
            Description :
            ** from a maintenance workshop
            ** well maintained condition - checked annually (!!)

            Furnishing:
            - electro-hydraulic sheet metal shears - "backdrop-guided"
            - ATLANTIC NC control unit - model "SC7p"
            * Target / actual information about the motorized back gauge
            * Manual positioning possible via handwheel
            * Digital display for backgauge position
            * electro-hydraulic cutting angle adjustment
            * Adjustable retraction from the back gauge before the start of the cut
            * Front left control unit
            - electro-motorized back gauge 10-750 mm
            - manual cutting gap adjustment, from the rear
            - 1x front side stop, with mm scale
            - 3x front support arms
            - 1x freely movable foot switch
            - Finger protection at the front
            - EMERGENCY stop button at the front
            - rear sheet metal slides
            - User manual (PDF)



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic GEFI GYOER GL4-3000

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011201 · Plate Shear - Hydraulic

          GEFI GYOER - GL4-3000 - - 1992 -

          Technical details
          sheet width 3000 mm︱plate thickness 4 mm︱total power requirement 11 kW︱weight of the machine ca. 5.400 kg︱
            sheet width 3000 mm
            plate thickness 4 mm
            total power requirement 11 kW
            weight of the machine ca. 5.400 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SIMAT SIMAT ATS 2006

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2046 · Plate Shear - Hydraulic

          SIMAT - SIMAT ATS 2006 - - 1992 -

          Technical details
          gebraucht ︱ 1992 ︱ 9680 ︱ prompt, Zwischenverkauf v ︱ 17300 €︱ 1 ︱ 2050 mm︱ 6 mm︱ 12 - 20 1/min︱ 0,5 - 3 °︱ 13 ︱ 750 mm︱ 7.5 kW︱ 770 mm︱ 2680 mm︱ 1650 mm︱ 1570 mm︱ 3000 kg︱
          link motion controlled Backgauge with handwheel for fine adjustment Cutting angle adjustment 1 side stop 1000 mm manual cutting gap adjustment rear light barrier shield Knives newly sharpened backgauge motor 0,37 kW Operating manual of identical HACO TS in German DOES NOT COMPLY WITH GERMAN UVV & AUSTRIAN AMVO
            gebraucht
            1992
            9680
            prompt, Zwischenverkauf v
            17300 €
            1
            2050 mm
            6 mm
            12 - 20 1/min
            0,5 - 3 °
            13
            750 mm
            7.5 kW
            770 mm
            2680 mm
            1650 mm
            1570 mm
            3000 kg
            Description :
            link motion controlled
            Backgauge with handwheel for fine adjustment
            Cutting angle adjustment
            1 side stop 1000 mm
            manual cutting gap adjustment
            rear light barrier shield
            Knives newly sharpened
            backgauge motor 0,37 kW
            Operating manual of identical HACO TS in German

            DOES NOT COMPLY WITH GERMAN UVV & AUSTRIAN AMVO


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SCHECHTL SMT 250

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94183 · Plate Shear - Hydraulic

          SCHECHTL - SMT 250 - - 1991 -

          Technical details
          sheet width 2500 mm︱plate thickness 1,75 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          manual back gauge up to 500 mm Side stop and table extension Knife sharpened
            sheet width 2500 mm
            plate thickness 1,75 mm
            Description :
            manual back gauge up to 500 mm
            Side stop and table extension
            Knife sharpened


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic EHT TSS 4-31

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011215 · Plate Shear - Hydraulic

          EHT - TSS 4-31 - - 1991 -

          Technical details
          sheet width 3050 mm︱plate thickness 4 mm︱frequency 50 Hz︱voltage 380 V︱control voltage 220 A︱ 19 A︱weight of the machine ca. 4800 kg︱dimensions of the machine ca. 3900x2100x1600 m︱
            sheet width 3050 mm
            plate thickness 4 mm
            frequency 50 Hz
            voltage 380 V
            control voltage 220 A
            19 A
            weight of the machine ca. 4800 kg
            dimensions of the machine ca. 3900x2100x1600 m


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HERA HSS V

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011164 · Plate Shear - Hydraulic

          HERA - HSS V - - 1991 -

          Technical details
          sheet width 3100 mm︱plate thickness 16 mm︱no. of strokes 12 Hub/min︱dimensions 4100x2100x2260 mm︱total power requirement 30 kW︱
            sheet width 3100 mm
            plate thickness 16 mm
            no. of strokes 12 Hub/min
            dimensions 4100x2100x2260 mm
            total power requirement 30 kW


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic AMADA GPN 1230

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011204 · Plate Shear - Hydraulic

          AMADA - GPN 1230 - - 1991 -

          Technical details
          sheet width 3050 mm︱plate thickness 12 mm︱ 1000 mm︱0 16 St.︱machine weight ab. 7.260 kg︱dimensions 3650 x 2000 x 2100 mm︱
            sheet width 3050 mm
            plate thickness 12 mm
            1000 mm
            0 16 St.
            machine weight ab. 7.260 kg
            dimensions 3650 x 2000 x 2100 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC ATS 3006

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92286 · Plate Shear - Hydraulic

          ATLANTIC - ATS 3006 - - 1990 -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱distance between columns 3460 mm︱table height 800 mm︱0 220 bar︱cutting angle adjustment 0,5x3 °︱down holder 18 ︱back stop - adjustable 750 mm︱front stop - adjustable 1000 mm︱main drive 7,5 kW︱oil volume 300 l︱total power requirement 7,5 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 3,7x2,0x1,8 m︱
          cutting angle adjustment manually blade gap adjustment manually angle stop
            sheet width 3050 mm
            plate thickness 6 mm
            distance between columns 3460 mm
            table height 800 mm
            0 220 bar
            cutting angle adjustment 0,5x3 °
            down holder 18
            back stop - adjustable 750 mm
            front stop - adjustable 1000 mm
            main drive 7,5 kW
            oil volume 300 l
            total power requirement 7,5 kW
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 3,7x2,0x1,8 m
            Description :
            cutting angle adjustment manually
            blade gap adjustment manually
            angle stop


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC ATS 3012

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01248 · Plate Shear - Hydraulic

          ATLANTIC - ATS 3012 - - 1990 -

          Technical details
          sheet width 3050 mm︱plate thickness 12 mm︱distance between columns 3100 mm︱table height over floor 900 mm︱cutting angle adjustment 0,5 - 3 °︱no. of strokes 6 - 13 Hub/min︱back stop - adjustable 1000 mm︱down holder 18 St︱oil volume 350 l︱total power requirement 22,5 kW︱weight of the machine ca. 8 t︱dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m︱
          Accessories: electr. back gauge, spare knives
            sheet width 3050 mm
            plate thickness 12 mm
            distance between columns 3100 mm
            table height over floor 900 mm
            cutting angle adjustment 0,5 - 3 °
            no. of strokes 6 - 13 Hub/min
            back stop - adjustable 1000 mm
            down holder 18 St
            oil volume 350 l
            total power requirement 22,5 kW
            weight of the machine ca. 8 t
            dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m
            Description :
            Accessories: electr. back gauge, spare knives


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic LVD HST 31/13

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011209 · Plate Shear - Hydraulic

          LVD - HST 31/13 - - 1990 -

          Technical details
          sheet width 3100 mm︱plate thickness 13 mm︱total power requirement 21 kW︱weight of the machine ca. 9000 kg︱
            sheet width 3100 mm
            plate thickness 13 mm
            total power requirement 21 kW
            weight of the machine ca. 9000 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic LOTZE 201 3000x12

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011195 · Plate Shear - Hydraulic

          LOTZE - 201 3000x12 - - 1990 -

          Technical details
          sheet width 3040 mm︱plate thickness 12 mm︱weight of the machine ca. 10000 kg︱
            sheet width 3040 mm
            plate thickness 12 mm
            weight of the machine ca. 10000 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DARLEY GS 4000 x 6

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-91535 · Plate Shear - Hydraulic

          DARLEY - GS 4000 x 6 - - 1989 - DARLEY

          Technical details
          sheet width 4100 mm︱plate thickness 6 mm︱distance between columns mm︱Control DARLEY ︱cutting angle 1°20' °︱quantity of oil 150 l︱total power requirement 18,5 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 4,6x2,3x2,0 m︱
          Cutting length adjustment, foot switch, 3 support arms (left with scale), motorized rear stop, finger guard, 21 hold-down devices, sheet metal slide, manual cutting gap adjustment, sheet metal holding device
            sheet width 4100 mm
            plate thickness 6 mm
            Control DARLEY
            cutting angle 1°20' °
            quantity of oil 150 l
            total power requirement 18,5 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 4,6x2,3x2,0 m
            Description :
            Cutting length adjustment,
            foot switch,
            3 support arms (left with scale),
            motorized rear stop,
            finger guard,
            21 hold-down devices,
            sheet metal slide,
            manual cutting gap adjustment,
            sheet metal holding device


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BRÜCK SCT 1225 SS

          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland
          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-200544 · Plate Shear - Hydraulic

          BRÜCK - SCT 1225 SS - - 1989 -

          Technical details
          sheet width 2500 mm︱plate thickness 12,5 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Width of metal, max. 2,500 mm Metal thickness, max. 12.5 mm Weight, approx. 19,000 kg Drive 40 kW Equipment / Special Features: Adjustment of cutting gap. Hydraulic blank holder. Automatic arrester adjustment for cutting blanks. Program input and piece number input. Transportation device for blanks. Stacking device. This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest.
            sheet width 2500 mm
            plate thickness 12,5 mm
            Description :
            Width of metal, max. 2,500 mm
            Metal thickness, max. 12.5 mm

            Weight, approx. 19,000 kg
            Drive 40 kW

            Equipment / Special Features:
            Adjustment of cutting gap.
            Hydraulic blank holder.
            Automatic arrester adjustment for cutting blanks.
            Program input and piece number input.
            Transportation device for blanks.
            Stacking device.


            This is an ideal machine for cutting lots of small blanks out of large pieces
            of sheet metal. Machine is equipped with a complex stacking device on
            the back of the machine. This is a heavy and rigid machine.

            Condition : Good to very good. Machine can soon be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STANKOIMPORT 2000 x 4

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4030366 · Plate Shear - Hydraulic

          STANKOIMPORT - 2000 x 4 - - 1989 -

          Technical details
          plate thickness 4 mm︱sheet width 2000 mm︱no. of strokes 65 Hub/min︱machine weight ab. 3250 kg︱
            plate thickness 4 mm
            sheet width 2000 mm
            no. of strokes 65 Hub/min
            machine weight ab. 3250 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RAS 86.30

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011198 · Plate Shear - Hydraulic

          RAS - 86.30 - - 1989 -

          Technical details
          sheet width 3190 mm︱plate thickness 6 mm︱distance between columns 3250 mm︱cutting angle 1,2 °︱no. of strokes 32-75 Hub/min︱column arm 100 mm︱back stop - adjustable 5-1000 mm︱table height 800 mm︱oil volume 150 l︱total power requirement 15 kW︱weight of the machine ca. 6200 kg︱dimensions of the machine ca. 3500x2000x2000 mm︱
            sheet width 3190 mm
            plate thickness 6 mm
            distance between columns 3250 mm
            cutting angle 1,2 °
            no. of strokes 32-75 Hub/min
            column arm 100 mm
            back stop - adjustable 5-1000 mm
            table height 800 mm
            oil volume 150 l
            total power requirement 15 kW
            weight of the machine ca. 6200 kg
            dimensions of the machine ca. 3500x2000x2000 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          • 8  
          •   
          •   
            •
          TOP Manufacturer:

          ERMAK - HESSE BY DURMA - ASSISTMACH - HACO - RABBA - EHT - BAYKAL - FASTI - LVD - ATLANTIC -

          компендіум
          Софтвер
          Вміст старих машин
          Конфіденційність
          Слідкуйте за нами!
          © 2000 - 2024, Logotech oHG · Програмне забезпечення та Інтернет-послуги - Всі права захищені