'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Plate Shear - Hydraulic

          Machinelist: Plate Shear - Hydraulic


          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ADIRA ADIRA GHV0835


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1481 · Plate Shear - Hydraulic

          ADIRA - ADIRA GHV0835 - - 1975 -

          Technical details
          gebraucht19759430prompt, Zwischenverkauf vPortugal12400 €︱ 10200 €︱ 13500 mm︱ 8 mm︱ 450 mm︱ 40 1/min︱ 0,5°/1°/1,7° °︱ 1000 mm︱ 14.7 kW︱ 4300 mm︱ 2100 mm︱ 1650 mm︱ 10500 kg︱
          link-guided machine with cutting angle adjustment cutting length limitation trapezoidal spindle for backgauge 1x side stop 2x table support arms balls in the table 18x hold-down devices operating instructions in GERMAN does not complie with the German UVV & Austrian AMVO
            gebraucht
            1975
            9430
            prompt, Zwischenverkauf v
            Portugal
            12400 €
            10200 €
            1
            3500 mm
            8 mm
            450 mm
            40 1/min
            0,5°/1°/1,7° °
            1000 mm
            14.7 kW
            4300 mm
            2100 mm
            1650 mm
            10500 kg
            Description :
            link-guided machine with cutting angle adjustment
            cutting length limitation
            trapezoidal spindle for backgauge
            1x side stop
            2x table support arms
            balls in the table
            18x hold-down devices
            operating instructions in GERMAN
            does not complie with the German UVV & Austrian AMVO
          10.200 €
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ADIRA GHL-0320


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9321114 · Plate Shear - Hydraulic

          ADIRA - GHL-0320 - - 1994 -

          Technical details

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ADIRA GHL-0420


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325280 · Plate Shear - Hydraulic

          ADIRA - GHL-0420 - - 2007 - ELGO

          Technical details

          ** good / well-kept condition (!!) Furnishing: - Heavy-duty hydraulic, swing-cut guillotine shears - electric - motorized backgauge * with digital ELGO control unit * digital position display from the backgauge * Target/actual value position value input - Front panel with EMERGENCY OFF button - manual cutting gap adjustment - Front finger protection (Plexiglas) - Stable, front support table with ball rollers - 2x long side stop (left + right) * with T-slot & millimeter scale - 1x front support arm (middle) - 1x free moving footswitch - Rear safety device - User manual (PDF) * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325280
            Description :
            ** good / well-kept condition (!!)

            Furnishing:
            - Heavy-duty hydraulic, swing-cut guillotine shears
            - electric - motorized backgauge
            * with digital ELGO control unit
            * digital position display from the backgauge
            * Target/actual value position value input
            - Front panel with EMERGENCY OFF button
            - manual cutting gap adjustment
            - Front finger protection (Plexiglas)
            - Stable, front support table with ball rollers
            - 2x long side stop (left + right)
            * with T-slot & millimeter scale
            - 1x front support arm (middle)
            - 1x free moving footswitch
            - Rear safety device
            - User manual (PDF)

            * Machinelink :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325280
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ADIRA GHL-0420


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94104 · Plate Shear - Hydraulic

          ADIRA - GHL-0420 - - 2007 - ELGO

          Technical details

          ** good / well-kept condition (!!) Furnishing: - Heavy-duty hydraulic, swing-cut guillotine shears - electric - motorized backgauge * with digital ELGO control unit * digital position display from the backgauge * Target/actual value position value input - Front panel with EMERGENCY OFF button - manual cutting gap adjustment - Front finger protection (Plexiglas) - Stable, front support table with ball rollers - 2x long side stop (left + right) * with T-slot & millimeter scale - 1x front support arm (middle) - 1x free moving footswitch - Rear safety device - User manual (PDF)
            Description :
            ** good / well-kept condition (!!)

            Furnishing:
            - Heavy-duty hydraulic, swing-cut guillotine shears
            - electric - motorized backgauge
            * with digital ELGO control unit
            * digital position display from the backgauge
            * Target/actual value position value input
            - Front panel with EMERGENCY OFF button
            - manual cutting gap adjustment
            - Front finger protection (Plexiglas)
            - Stable, front support table with ball rollers
            - 2x long side stop (left + right)
            * with T-slot & millimeter scale
            - 1x front support arm (middle)
            - 1x free moving footswitch
            - Rear safety device
            - User manual (PDF)


          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ADIRA GHL-0425


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4780 · Plate Shear - Hydraulic

          ADIRA - GHL-0425 - - -

          Technical details

          Electrical back stop incl. spare blade More details on www.marcels-maschinen.ch
            Description :
            Electrical back stop
            incl. spare blade

            More details on www.marcels-maschinen.ch

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ADIRA GHOE-0630


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9320271 · Plate Shear - Hydraulic

          ADIRA - GHOE-0630 - - 1992 -

          Technical details

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ADIRA GHR-0630


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325283 · Plate Shear - Hydraulic

          ADIRA - GHR-0630 - - 1996 - ELGO

          Technical details

          ** from a maintenance workshop (!!) ** with only approx. 2.500 operating hours Furnishing: - electro-hydraulic sheet metal shears - type "oscillating cut" - electric backgauge 10 - 1.000 mm * with digital ELGO position display * Entry of target/actual value possible * on ball screws - manual cutting gap adjustment, lateral adjustment - electrical cutting length limitation - 1x side stop, with mm scale - 1x support arm - 1x free moving footswitch - Support table with ball rollers - front finger protection - rear safety device - rear sheet metal slide - Operation manual
            Description :
            ** from a maintenance workshop (!!)
            ** with only approx. 2.500 operating hours

            Furnishing:
            - electro-hydraulic sheet metal shears - type "oscillating cut"
            - electric backgauge 10 - 1.000 mm
            * with digital ELGO position display
            * Entry of target/actual value possible
            * on ball screws
            - manual cutting gap adjustment, lateral adjustment
            - electrical cutting length limitation
            - 1x side stop, with mm scale
            - 1x support arm
            - 1x free moving footswitch
            - Support table with ball rollers
            - front finger protection
            - rear safety device
            - rear sheet metal slide
            - Operation manual
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ADIRA GHS-0630


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325171 · Plate Shear - Hydraulic

          ADIRA - GHS-0630 - - 1993 - konv.

          Technical details

          ** from a maintenance workshop (!!) Furnishing: - hydraulic / sheet metal shears "swing cut" - electrical backgauge 10-1,000 mm - with analog display - Fine adjustment at the front, via handwheel - manual cutting gap adjustment, from the side - 1x side stop - 2x support arms - Freely movable foot switch - Operation manual
            Description :
            ** from a maintenance workshop (!!)

            Furnishing:
            - hydraulic / sheet metal shears "swing cut"
            - electrical backgauge 10-1,000 mm
            - with analog display
            - Fine adjustment at the front, via handwheel
            - manual cutting gap adjustment, from the side
            - 1x side stop
            - 2x support arms
            - Freely movable foot switch
            - Operation manual
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ADIRA GHS-1330


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011122 · Plate Shear - Hydraulic

          ADIRA - GHS-1330 - - 2006 -

          Technical details

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ADIRA GHV0835


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-3390 · Plate Shear - Hydraulic

          ADIRA - GHV0835 - - 1985 -

          Technical details

          link-guided machine with cutting angle adjustment cutting length limitation trapezoidal spindle for backgauge 1x side stop 2x table support arms balls in the table 18x hold-down devices operating instructions in GERMAN does not complie with the German UVV & Austrian AMVO sheet thickness: 8 mm cutting length: 3.500 mm back stop: 1.000 mm projection: 450 mm stroke: 16 - 40 H / min cutting angle: 0,5 ° / 1 ° / 1,7 ° cutting gap adjustment: 0,1 - 1,4 mm motor: 14,7 kW length: 4.300 mm width: 2.100 mm (without support arm) height: 1.650 mm weight: 10.500 kg
            Description :
            link-guided machine with cutting angle adjustment
            cutting length limitation
            trapezoidal spindle for backgauge
            1x side stop
            2x table support arms
            balls in the table
            18x hold-down devices
            operating instructions in GERMAN
            does not complie with the German UVV & Austrian AMVO

            sheet thickness: 8 mm
            cutting length: 3.500 mm
            back stop: 1.000 mm
            projection: 450 mm
            stroke: 16 - 40 H / min
            cutting angle: 0,5 ° / 1 ° / 1,7 °
            cutting gap adjustment: 0,1 - 1,4 mm
            motor: 14,7 kW
            length: 4.300 mm
            width: 2.100 mm (without support arm)
            height: 1.650 mm
            weight: 10.500 kg
          •   
          •   
          • 1  

            Профіль торговця: Schmitt Reinhold GmbH
          Maschinen Und Anlagen Für Bänder,
          Bleche, Rohre Und Профіль

          Зв'язатися з трейдером



            Schmitt Reinhold GmbH
          Maschinen Und Anlagen Für Bänder,
          Bleche, Rohre Und Профіль

           Obernahmerstr. 74
            58119 - Хаген-Гогенлімбург
            Німеччина
            + 49 (0) 2334 4847 "> + 49 (0) 2334 4847
            + 49 (0) 2334 4840
            info@reinhold-schmitt.de
            www.reinhold-schmitt.de

          Профіль Трейдера

          Ми є торговою компанією, яка була створена в 1969 і у нас є простір для зберігання близько 3.200 м² і наш бізнес продавати використовуються і нові машини для обробки металу.


          мати справу з купівлею та продажем вживаних та нових машин, а також виробничих потужностей для виробництва та обробки котушок, листового металу, труб і профілів зі сталі, нержавіючої сталі, міді, латуні та алюмінію, наприклад, ГОРЯЧО-ПРОКАТНИХ МЛІН, ХОЛОДІ ПРОКАТНІ ФРИМИ, РІЗНИЧНІ ЛІНІЇ, РЕЗКИ ДО ДОЛЖИНИ, ДЕКОЙЛЕР, РЕЙКЕР, ЗВАРЮЮЧІ ЛІНІЇ ТРУБ, ПРОДУКЦІЙНІ ЛІНІЇ, РІВНІЛЬНИЙ, ПРАВИЛЬНИЙ, ВІДГРІВНИЙ І ТВЕРДИЙ ЗАВОДИ, а також компоненти згаданого обладнання.

          За необхідності ми здійснюємо демонтаж, завантаження, логістику, імпорт, експорт і повторне складання об'єктів, а також модернізацію або зміну режиму управління. Ми запевняємо в будь-який час професійну та кваліфіковану співпрацю для задоволення ваших очікувань.


          Ми маємо майже 50 років досвіду в бізнесі торгівлі використовувалися і нові механізми, а також виробничі потужності для виробництва і обробки котушок, металевих листів, труб і профілів.




          Контакти

          REINHOLD SCHMITT GMBH


          Контактні особи:

            Роланд Беккер

            Хольгер Суберг

            Джованна Ісопп


            Obernahmerstrasse 74, D - 58119 Хаген (Німеччина)

            02334 4847

            02334 4840

            info@reinhold-schmitt.de





          Hydraulic Plate Shear from LagerMaschinen.de
          Hydraulic plate shear from LagerMaschinen - a good choice

          When purchasing a hydraulic plate shear it’s important to gauge the precision of the machine. Luckily LagerMaschinen's experts are well-versed in machine calibration and precision gears. The hydraulic plate shear used for slicing large boards among many different materials absolutely exacts precision for its various tasks. By purchasing your used machine namely a hydraulic plate shear from LagerMaschinen you ensure 100% quality as well as safety. LagerMaschinen's custom installation service will provide your staff with all needed information. Get started today!

          LagerMaschinen.de's hydraulic plate shear

          By buying your used hydraulic plate shear from LagerMaschinen.de you ensure not only a wiser financial decision for your small business but you also increase your professional network. Using the LagerMaschinen platform you can interact with sellers of every machine available including the hydraulic plate shear thereby obtaining their advice or guidance most often in your geographical area. Your hydraulic plate shear from LagerMaschinen is therefore not only an investment in your business but possibly an investment in your professional network.

          Hydraulic plate shear - built to last

          The hydraulic plate shear especially when bought used needs special care. By interacting with both LagerMaschinen.de's sellers and with LagerMaschinen experts themselves you gain knowledge as well as a new business contact along the way. Additionally take advantage of LagerMaschinens.de's delivery and installation service including a demonstration of your new - but used - machine. By purchasing your hydraulic plate shear through LagerMaschinen you'll simply add to the list of clients who love this service. Join today and start searching for the perfect machine.

          Schmitt Reinhold GmbH Maschinen Und Anlagen Für Bänder, Bleche, Rohre Und Profile 58119 - Hagen-Hohenlimburg Obernahmerstr. 74 Deutschland
          Schmitt Reinhold GmbH Maschinen Und Anlagen Für Bänder, Bleche, Rohre Und Profile

          Obernahmerstr. 74



          Contact Trader


            Schmitt Reinhold GmbH Maschinen Und Anlagen Für Bänder, Bleche, Rohre Und Profile
           Obernahmerstr. 74
            58119 - Hagen-Hohenlimburg
            Deutschland
            +49 (0)2334 4847
            +49 (0)2334 4840
            info@reinhold-schmitt.de
            www.reinhold-schmitt.de
            Contact person:

           




          Machine category


          Abwickelhaspel · Aufwickelhaspel · Besäumschere · Bundhubwagen · Bundöffner - Treiber · Drehkreuz · Duo - Walzwerk · Längsteilanlage · Motor · Papierwickler · Profilieranlage · Querteilanlage · Querteilschere · Richtmaschine · Schrottschneider · Umwickelanlage · Walzenschleifmaschine ·