'
Європейська мережа дилерів акціонерної техніки
+ 49 (0) 2389 5299080
Пошукова служба Продаємо старі машини

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:
             вид: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          1. machine-categorie:
          2. Metal Processing
          3. Sheet metal working - shaeres - bending
          4. Mandrel tube bending machine

          Mandrel tube bending machine

          Machinelist: Mandrel tube bending machine

          Mandrel tube bending machine

          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Mega Bender 030 / Top 030

          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland
          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6387 · Mandrel tube bending machine

          ERCOLINA - Mega Bender 030 / Top 030 - - 2014 -

          Technical details
          tube diameter 60 mm︱wall strength 3 mm︱bending radius min. 2 x Rohr-Ø ÷ R200 mm︱bending angle 0 - 180 °︱gas tube pipelines 2" (60.,3mm) mm︱speed stufenlos 0,5 - 2,0 ︱total power requirement 1,5 kW︱weight of the machine ca. 0,7 t︱
          - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle
            tube diameter 60 mm
            wall strength 3 mm
            bending radius min. 2 x Rohr-Ø ÷ R200 mm
            bending angle 0 - 180 °
            gas tube pipelines 2" (60.,3mm) mm
            speed stufenlos 0,5 - 2,0
            total power requirement 1,5 kW
            weight of the machine ca. 0,7 t
            Description :
            - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic
            design (6000 mm pipe slide length)
            - Electromechanical drive of the bending axis
            - hydraulic clamping
            - mandrel feed / extract
            - 30 programs x 9 bending angle + correction angle


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine TRANSFLUID DB 628 ST / SPS

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12117 · Mandrel tube bending machine

          TRANSFLUID - DB 628 ST / SPS - - 1996 - IPU 20

          Technical details
          tube diameter 6 - 28 mm︱wall strength 2 mm︱bending radius min. 2 x D ︱Control IPU 20 ︱bending radius max. 5,0 x D mm︱bending angle max. 190 °︱arbor length 3000 mm︱operating pressure 180 bar︱hydraulic motor 4 kW︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 3,8 x 1,1 x 1,3 m︱Electric 400 Volt ︱Bending segments 15-20-26-28 mm︱Bending mandrels 4 ︱Operation panel 0,5 x 0,6 x 1,03 m︱Double Foot pedal ︱Machine manual ︱Condition: ready for operation ︱Video available on our website. ︱
          Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then. Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².
            tube diameter 6 - 28 mm
            wall strength 2 mm
            bending radius min. 2 x D
            Control IPU 20
            bending radius max. 5,0 x D mm
            bending angle max. 190 °
            arbor length 3000 mm
            operating pressure 180 bar
            hydraulic motor 4 kW
            weight of the machine ca. 900 kg
            dimensions of the machine ca. 3,8 x 1,1 x 1,3 m
            Bending segments 15-20-26-28 mm
            Bending mandrels 4
            Operation panel 0,5 x 0,6 x 1,03 m
            Description :
            Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for
            20 angles and display in the control panel for bending angle specification,
            angle detection and angle measurement via absolute value encoder, autom. tool
            plate reset, Turning device with digital display, hydr. quick chuck, aut.
            Mandrel lubrication, adjustable length stops.
            Operating modes: MANUAL and semi-automatic.
            Control buttons: hydraulics on / off, operating mode selection, clamp to / on,
            clamp forward / backward, mandrel forward / backward, bending forward /
            backward /, locking forward / backward, mandrel lubrication, turning device
            forward / backward, plate reset, length stop forward, emergency stop.
            The machine comes from a prototype construction and was only used a little
            until 2000. After that, the machines of this department were sold. However, the
            purchaser did not use the pipe bending machine and therefore it has only stood
            in the warehouse and has not worked since then.
            Please notice that the price of a new machine today is over € 60.000,--.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine SCHWARZE-WIRTZ CNC 25 MR

          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland
          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02675 · Mandrel tube bending machine

          SCHWARZE-WIRTZ - CNC 25 MR - - 1994 -

          Technical details
          tube diameter 25 mm︱wall strength 2 mm︱bending radius min. 10 mm︱Control ︱bending radius max. 75 mm︱total power requirement 11 kW︱weight of the machine ca. 1,45 t︱dimensions of the machine ca. m︱
            tube diameter 25 mm
            wall strength 2 mm
            bending radius min. 10 mm
            bending radius max. 75 mm
            total power requirement 11 kW
            weight of the machine ca. 1,45 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine SCHWARZE-WIRTZ PERFEKT WE 40 D

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01220 · Mandrel tube bending machine

          SCHWARZE-WIRTZ - PERFEKT WE 40 D - - 1977 -

          Technical details
          tube diameter max. 38 mm︱wall strength 2 mm︱bar material dia. min. 10 mm︱bending radius min. 35 mm︱bending radius max. 150 mm︱pull up length of tube 4500 mm︱bending angle max. 180 °︱accuracy of bending angle ± 0,2 °︱total power requirement 7,5 kW︱weight of the machine ca. 1,2 t︱dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m︱
          - with 8-pos. bending angle pre-selection - crawler gear control - positioning device by hand - tube twist device Following bending tools are with the machine: - ø 10 mm, radius 27,5 mm - ø 12 mm, radius 35 mm - ø 12 mm, radius 56 mm - ø 15 mm, radius 35 mm - ø 15 mm, radius 57,5 mm - ø 18 mm, radius 35 mm - ø 18 mm, radius 59 mm
            tube diameter max. 38 mm
            wall strength 2 mm
            bar material dia. min. 10 mm
            bending radius min. 35 mm
            bending radius max. 150 mm
            pull up length of tube 4500 mm
            bending angle max. 180 °
            accuracy of bending angle ± 0,2 °
            total power requirement 7,5 kW
            weight of the machine ca. 1,2 t
            dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m
            Description :
            - with 8-pos. bending angle pre-selection
            - crawler gear control
            - positioning device by hand
            - tube twist device

            Following bending tools are with the machine:
            - ø 10 mm, radius 27,5 mm
            - ø 12 mm, radius 35 mm
            - ø 12 mm, radius 56 mm
            - ø 15 mm, radius 35 mm
            - ø 15 mm, radius 57,5 mm
            - ø 18 mm, radius 35 mm
            - ø 18 mm, radius 59 mm


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA TB80-A/P80NC-4

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2040 · Mandrel tube bending machine

          ERCOLINA - TB80-A/P80NC-4 - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 64000 €︱ 1286.4 €︱ 76 mm︱ 4535 mm︱ 1145 mm︱ 1400 mm︱ 1488 kg︱ 18 cm³︱ 76 x 3,6 mm︱ 76 x 2,3 mm︱ 70x70x3 mm︱ 70x50x3 mm︱ 70x50x6 mm︱ 76 mm︱ 200 mm︱ 10 mm︱ 195 °︱
          Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C) New TCPlus control • 7” colour touch screen • Icons for ease use • Automatic mode, manual mode, programming mode • Advanced OFFSET function • Easy language change • Auto-tuning of the main machine components • Programmable bending speed for each single bend of the program • Unlimited programs possibility (USB port) • Every program can contain up to 30 different bends • Available extensions of 2 meters each (optional) • Tie bar (optional - art. TB80-TI)
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            64000 €
            1286.4 €
            76 mm
            4535 mm
            1145 mm
            1400 mm
            1488 kg
            18 cm³
            76 x 3,6 mm
            76 x 2,3 mm
            70x70x3 mm
            70x50x3 mm
            70x50x6 mm
            76 mm
            200 mm
            10 mm
            195 °
            Description :
            Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C)

            New TCPlus control
            • 7” colour touch screen
            • Icons for ease use
            • Automatic mode, manual mode, programming mode
            • Advanced OFFSET function
            • Easy language change
            • Auto-tuning of the main machine components
            • Programmable bending speed for each single bend of
            the program
            • Unlimited programs possibility (USB port)
            • Every program can contain up to 30 different bends
            • Available extensions of 2 meters each (optional)
            • Tie bar (optional - art. TB80-TI)


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Ercobender EB76 CNC V7S

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1081 · Mandrel tube bending machine

          ERCOLINA - Ercobender EB76 CNC V7S - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 121200 €︱ 2411.88 €︱ 76 mm︱ 5700 mm︱ 1100 mm︱ 1550 mm︱ 2700 kg︱ 25 cm³︱ 76,1 x 6,8 mm︱ 2”1/2 mm︱ 76,2 x 3,8 mm︱ 63,5 x 63,5 x 5,6 mm︱ 70 x 50 x 8 mm︱ 70 x 50 x 6 mm︱ 79 mm︱ 250 mm︱ 20 mm︱
          FST clamping system (Patented) 6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis), bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis) and hydraulic mandrel movement (Y3) Touch screen control with 3D display of the tube Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment Importing files in iges and dxf format (optional) Integrated Wi-Fi FURTHER MANDREL LENGTHS ON REQUEST
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            121200 €
            2411.88 €
            76 mm
            5700 mm
            1100 mm
            1550 mm
            2700 kg
            25 cm³
            76,1 x 6,8 mm
            2”1/2 mm
            76,2 x 3,8 mm
            63,5 x 63,5 x 5,6 mm
            70 x 50 x 8 mm
            70 x 50 x 6 mm
            79 mm
            250 mm
            20 mm
            Description :
            FST clamping system (Patented)
            6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis),
            bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis)
            and hydraulic mandrel movement (Y3)
            Touch screen control with 3D display of the tube
            Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment
            Importing files in iges and dxf format (optional)
            Integrated Wi-Fi

            FURTHER MANDREL LENGTHS ON REQUEST


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Megabender MG 030 PT A3/H76

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1075 · Mandrel tube bending machine

          ERCOLINA - Megabender MG 030 PT A3/H76 - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 35300 €︱ 716.59 €︱ 64 mm︱ 4000 mm︱ 950 mm︱ 1250 mm︱ 850 kg︱ 10 cm³︱ 64 x 3,3 mm︱ 2" mm︱ 60,3 x 2,2 mm︱ 60 x 60 x 2 mm︱ 40 x 60 x 4 mm︱ 60 x 40 x 3 mm︱ 76 mm︱ 200 mm︱ 20 mm︱
          with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to 4 rpm (Inverter versions) Pneumatic chuck ALTERNATIVELY: model with mandrel length 1,5 / 4 / 6 mm
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            35300 €
            716.59 €
            64 mm
            4000 mm
            950 mm
            1250 mm
            850 kg
            10 cm³
            64 x 3,3 mm
            2" mm
            60,3 x 2,2 mm
            60 x 60 x 2 mm
            40 x 60 x 4 mm
            60 x 40 x 3 mm
            76 mm
            200 mm
            20 mm
            Description :
            with mandrel 3 m length
            FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide
            Programmable C-axis bending
            Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops
            Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu
            30 programs of 9 bends each can be memorized
            Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis)
            External pressure gauges for easy setting of the system and closing pressure
            Variable bending speed up to 4 rpm (Inverter versions)
            Pneumatic chuck

            ALTERNATIVELY:
            model with mandrel length 1,5 / 4 / 6 mm


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Mandrel tube bending machine ERCOLINA Topbender TB 050 PT A3/H48

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-969 · Mandrel tube bending machine

          ERCOLINA - Topbender TB 050 PT A3/H48 - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Italien ︱ 29300 €︱ 594.79 €︱ 50 mm︱ 4000 mm︱ 950 mm︱ 1250 mm︱ 430 kg︱ 6 cm³︱ 50 x 3,31 mm︱ Ø 1”1/4 mm︱ Ø 50 x 2,5 mm︱ 40 x 40 x 4 mm︱ 25 x 50 x 6 mm︱ 50 x 25 x 2,7 mm︱ 60 mm︱ 200 mm︱ 20 mm︱
          With mandrel 3 m length Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            29300 €
            594.79 €
            50 mm
            4000 mm
            950 mm
            1250 mm
            430 kg
            6 cm³
            50 x 3,31 mm
            Ø 1”1/4 mm
            Ø 50 x 2,5 mm
            40 x 40 x 4 mm
            25 x 50 x 6 mm
            50 x 25 x 2,7 mm
            60 mm
            200 mm
            20 mm
            Description :
            With mandrel 3 m length
            Can be used with or withoud mandrel
            Two bending speeds
            Programmable bend sequencing and mandrel retraction
            Independent clamp and pressure die adjustment
            Micrometer wiper die adjustment
            Auxiliary system for stabilizing the hydraulic slide pressure
            Quick tool change system
            With pneumatic material clamping and DRO system for linear and rotational positioning

            ALTERNATIVELY:
            model with mandrel 6 m length price on request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact

          Plate Bending Machine - 3 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls HESSE by ISITAN R 1050 x 75

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-226 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - R 1050 x 75 - - 2021 -

          Technical details
          gebraucht ︱ 2021 ︱ 9501 ︱ Türkei ︱ 2100 €︱ 1 ︱ 1050 mm︱ 2 mm︱ 75 mm︱ 1930 mm︱ 700 mm︱ 1160 mm︱ 300 kg︱
          MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH
            gebraucht
            2021
            9501
            Türkei
            2100 €
            1
            1050 mm
            2 mm
            75 mm
            1930 mm
            700 mm
            1160 mm
            300 kg
            Description :
            MINT CONDITION
            3 rolls
            asymmetric rolls - prebending
            longitudinal grooves in lower and lateral roll
            Infeed of the lower roller by a central lever - with gear reduction
            machine stand
            user manual in GERMAN orENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls AKYAPAK 1030 x 70

          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland
          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-19334 · Plate Bending Machine - 3 Rolls

          AKYAPAK - 1030 x 70 - - 1998 -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1050 mm

          metal sheet thickness: 1,5 mm

          upper roller-Ø: 70 mm

          below roller-Ø: 70 mm
          Njw93ychg

          weight: 320 kg

          space needed: 700 x 1300 x 1100 mm
            Description :
            working width: 1050 mm



            metal sheet thickness: 1,5 mm



            upper roller-Ø: 70 mm



            below roller-Ø: 70 mm

            Njw93ychg



            weight: 320 kg



            space needed: 700 x 1300 x 1100 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls DURMAZLAR KSM 56

          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland
          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-18062 · Plate Bending Machine - 3 Rolls

          DURMAZLAR - KSM 56 - - 1996 -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1030 mm

          metal sheet thickness: 1 mm

          upper roller-Ø: 60 mm

          below roller-Ø: 60 mm
          Zxy8p9m

          weight: 170 kg

          space needed: 560 x 1570 x 1080 mm
            Description :
            working width: 1030 mm



            metal sheet thickness: 1 mm



            upper roller-Ø: 60 mm



            below roller-Ø: 60 mm

            Zxy8p9m



            weight: 170 kg



            space needed: 560 x 1570 x 1080 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls DURMAZLAR KSM 56

          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland
          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-18062 · Plate Bending Machine - 3 Rolls

          DURMAZLAR - KSM 56 - - 1996 -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1030 mm
          Iw8bipcy0
          metal sheet thickness: 1 mm
          upper roller-Ø: 60 mm
          below roller-Ø: 60 mm
          weight: 170 kg
          space needed: 560 x 1570 x 1080 mm
            Description :
            working width: 1030 mm

            Iw8bipcy0

            metal sheet thickness: 1 mm

            upper roller-Ø: 60 mm

            below roller-Ø: 60 mm

            weight: 170 kg

            space needed: 560 x 1570 x 1080 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls SCHAEFER SRMVQ

          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland
          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H06661 · Plate Bending Machine - 3 Rolls

          SCHAEFER - SRMVQ - - 1975 -

          Technical details
          sheet width 3000 mm︱plate thickness 40 mm︱pre-bending 30 ︱total power requirement kW︱weight of the machine ca. 45 t︱dimensions of the machine ca. 8,4 x 2,6 x 3,7 m︱
          Machine in good condition. PREBENDING DOUBLE . Maximum bending length 3.000 mm . Bending capacity 40 mm . Prebending capacity 30 mm . Top roll diameter 590 mm . Bending rolls diameter 490 mm . Main motor 45 kW . Bending motor 30 kW . Digital readout in all axis . Approximate weight 45 t . Approximate dimenssion.: . Length: 8.400 mm . Width: 2.600 mm . Height: 3.700 mm . Trench height: 1.780 mm
            sheet width 3000 mm
            plate thickness 40 mm
            pre-bending 30
            weight of the machine ca. 45 t
            dimensions of the machine ca. 8,4 x 2,6 x 3,7 m
            Description :
            Machine in good condition.

            PREBENDING DOUBLE

            . Maximum bending length 3.000 mm
            . Bending capacity 40 mm
            . Prebending capacity 30 mm
            . Top roll diameter 590 mm
            . Bending rolls diameter 490 mm
            . Main motor 45 kW
            . Bending motor 30 kW
            . Digital readout in all axis
            . Approximate weight 45 t
            . Approximate dimenssion.:
            . Length: 8.400 mm
            . Width: 2.600 mm
            . Height: 3.700 mm
            . Trench height: 1.780 mm


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls unbekannt unbekannt

          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland
          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26672 · Plate Bending Machine - 3 Rolls

          unbekannt - unbekannt - - -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1040 mm
          Lp20uvs
          metal sheet thickness: 1,25 mm
          upper roller-Ø: 56 mm
          below roller-Ø: 56 mm
          weight: 190 kg
          space needed: 1450 x 460 x 1030 mm
            Description :
            working width: 1040 mm

            Lp20uvs

            metal sheet thickness: 1,25 mm

            upper roller-Ø: 56 mm

            below roller-Ø: 56 mm

            weight: 190 kg

            space needed: 1450 x 460 x 1030 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls unbekannt unbekannt

          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland
          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26395 · Plate Bending Machine - 3 Rolls

          unbekannt - unbekannt - - -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1020 mm
          32qxc3xgp
          metal sheet thickness: 1 mm
          upper roller-Ø: 55 mm
          below roller-Ø: 55 mm
          space needed: 1370 x 570 x 1100 mm
            Description :
            working width: 1020 mm

            32qxc3xgp

            metal sheet thickness: 1 mm

            upper roller-Ø: 55 mm

            below roller-Ø: 55 mm

            space needed: 1370 x 570 x 1100 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls HESSE by ISITAN R 1270 x 68

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-224 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - R 1270 x 68 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 3100 €︱ 1270 mm︱ 1.2 mm︱ 68 mm︱ 1.5 kW︱ 1610 mm︱ 700 mm︱ 1160 mm︱ 385 kg︱
          3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            3100 €
            1270 mm
            1.2 mm
            68 mm
            1.5 kW
            1610 mm
            700 mm
            1160 mm
            385 kg
            Description :
            3 Walzen
            asymmetric rolls - prebending
            longitudinal grooves in lower and lateral roll
            Infeed of the lower roller by a central lever - with gear reduction
            machine stand
            user manual in GERMAN orENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls HESSE by ISITAN IR 1270 x 75

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-228 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - IR 1270 x 75 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 5750 €︱ 119.03 €︱ 1270 mm︱ 1.5 mm︱ 75 mm︱ 1.5 kW︱ 1830 mm︱ 700 mm︱ 1160 mm︱ 400 kg︱
          3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll hardened rollers right / left rotation with double foot switch user manual in GERMAN or ENGLISH
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            5750 €
            119.03 €
            1270 mm
            1.5 mm
            75 mm
            1.5 kW
            1830 mm
            700 mm
            1160 mm
            400 kg
            Description :
            3 rolls
            asymmetric rolls - prebending
            2 rolls driven by brakemotor
            lateral roll adjustable by ratchet lever
            longitudinal grooves in lower and lateral roll
            tiltable upper roll
            hardened rollers
            right / left rotation with double foot switch
            user manual in GERMAN or ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls HESSE by ISITAN IRM 2050 x 140

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1459 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - IRM 2050 x 140 - - -

          Technical details
          neu ︱ ca. 12 Wochen ab Auftrags ︱ Türkei ︱ 17300 €︱ 354.65 €︱ 2050 mm︱ 4 mm︱ 140 mm︱ 2.2 kW︱ 3200 mm︱ 750 mm︱ 1000 mm︱ 1650 kg︱
          3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll upper roller can be swiveled forward forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS: hardened Rolls€ 1.800,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- (sample photo)
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            17300 €
            354.65 €
            2050 mm
            4 mm
            140 mm
            2.2 kW
            3200 mm
            750 mm
            1000 mm
            1650 kg
            Description :
            3 reels
            asymmetrical roller arrangement - with pre-bending
            2 driven rollers by means of a brake motor
            manual Back Roll
            upper roller can be swiveled forward
            forward / reverse run
            conical rounding by inclining the rear rollers
            movable control panel

            OPTIONS:

            hardened Rolls€ 1.800,-
            Motorised Back Roll (Power Rear Roll)€ 1.200,-
            Digital Read-Out€ 1.200,-

            (sample photo)


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls HESSE by ISITAN IRM 1270 x 120

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-207 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - IRM 1270 x 120 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 13000 €︱ 266.5 €︱ 1270 mm︱ 4 mm︱ 120 mm︱ 3 m/min︱ 2.2 kW︱ 2470 mm︱ 750 mm︱ 1000 mm︱ 1110 kg︱
          3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.250,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,-
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            13000 €
            266.5 €
            1270 mm
            4 mm
            120 mm
            3 m/min
            2.2 kW
            2470 mm
            750 mm
            1000 mm
            1110 kg
            Description :
            3 rolls
            asymmetric rolls - prebending
            2 rolls driven by brakemotor
            manual Back Roll
            forward tiltable upper roll
            forward and reverse revs
            conical bending by tilt of backroll
            movable control panel
            users manual in ENGLISH or GERMAN

            OPTIONS:
            hardened Rolls€ 1.250,-
            Motorised Back Roll (Power Rear Roll)€ 1.200,-
            Digital Read-Out€ 1.200,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls HESSE by ISITAN IRM 1550 x 140

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-209 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - IRM 1550 x 140 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 15000 €︱ 307.5 €︱ 1550 mm︱ 4 mm︱ 140 mm︱ 3,5 m/min︱ 2.2 kW︱ 2700 mm︱ 750 mm︱ 1000 mm︱ 1420 kg︱
          3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,-
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            15000 €
            307.5 €
            1550 mm
            4 mm
            140 mm
            3,5 m/min
            2.2 kW
            2700 mm
            750 mm
            1000 mm
            1420 kg
            Description :
            3 rolls
            asymmetric rolls - prebending
            2 rolls driven by brakemotor
            manual Back Roll
            forward tiltable upper roll
            forward and reverse revs
            conical bending by tilt of backroll
            movable control panel
            users manual in ENGLISH or GERMAN

            OPTIONS:
            hardened Rolls€ 1.500,-
            Motorised Back Roll (Power Rear Roll)€ 1.200,-
            Digital Read-Out€ 1.200,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls HESSE by ISITAN IRM 1270 x 140

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-211 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - IRM 1270 x 140 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 14000 €︱ 287 €︱ 1270 mm︱ 5 mm︱ 140 mm︱ 3,5 m/min︱ 2.2 kW︱ 2470 mm︱ 750 mm︱ 1000 mm︱ 1350 kg︱
          3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,-
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            14000 €
            287 €
            1270 mm
            5 mm
            140 mm
            3,5 m/min
            2.2 kW
            2470 mm
            750 mm
            1000 mm
            1350 kg
            Description :
            3 rolls
            asymmetric rolls - prebending
            2 rolls driven by brakemotor
            manual Back Roll
            forward tiltable upper roll
            forward and reverse revs
            conical bending by tilt of backroll
            movable control panel
            users manual in ENGLISH or GERMAN

            OPTIONS:
            hardened Rolls€ 1.500,-
            Motorised Back Roll (Power Rear Roll)€ 1.200,-
            Digital Read-Out€ 1.200,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls HESSE by ISITAN RS 1050 x 90

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-230 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - RS 1050 x 90 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 5300 €︱ 109.71 €︱ 1050 mm︱ 3 mm︱ 2 mm︱ 90 mm︱ 2080 mm︱ 700 mm︱ 1250 mm︱ 410 kg︱
          3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            5300 €
            109.71 €
            1050 mm
            3 mm
            2 mm
            90 mm
            2080 mm
            700 mm
            1250 mm
            410 kg
            Description :
            3 rolls
            asymmetric rolls - prebending
            2 rolls driven by handwheel
            lateral roll adjustable by handwheel
            longitudinal grooves in lower and lateral roll
            tiltable upper roll
            conical rolling device
            user manual in GERMAN


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls HESSE by ISITAN IRM 1050 x 130

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-49 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - IRM 1050 x 130 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 12500 €︱ 256.25 €︱ 1050 mm︱ 5 mm︱ 130 mm︱ 3,5 m/min︱ 2.2 kW︱ 2200 mm︱ 750 mm︱ 1000 mm︱ 1200 kg︱
          3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.250,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,-
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            12500 €
            256.25 €
            1050 mm
            5 mm
            130 mm
            3,5 m/min
            2.2 kW
            2200 mm
            750 mm
            1000 mm
            1200 kg
            Description :
            3 rolls
            asymmetric rolls - prebending
            2 rolls driven by brakemotor
            manual Back Roll
            forward tiltable upper roll
            forward and reverse revs
            conical bending by tilt of backroll
            movable control panel
            users manual in ENGLISH or GERMAN

            OPTIONS:
            hardened Rolls€ 1.250,-
            Motorised Back Roll (Power Rear Roll)€ 1.200,-
            Digital Read-Out€ 1.200,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 3 Rolls HESSE by DURMA MRB-S 1506

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-290 · Plate Bending Machine - 3 Rolls

          HESSE by DURMA - MRB-S 1506 - - -

          Technical details
          neu ︱ ca. 12 Wochen ab Auftrags ︱ Türkei ︱ 19600 €︱ 401.8 €︱ 1530 mm︱ 6 mm︱ 6 mm︱ 4 mm︱ 150 mm︱ 4 kW︱ 3100 mm︱ 1120 mm︱ 1020 mm︱ 2100 kg︱
          3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            19600 €
            401.8 €
            1530 mm
            6 mm
            6 mm
            4 mm
            150 mm
            4 kW
            3100 mm
            1120 mm
            1020 mm
            2100 kg
            Description :
            3 rolls
            Asymmetrical rolls arrangement - with pre-bending
            2 driven rolls
            Motorized adjustment of lateral and clamping roll
            Digital read-out for lateral and clamping roll
            Swiveling top roll to the front
            Forward/reverse run
            Hardened rolls
            Moveable control panel
            User manual in GERMAN and ENGLISH

            (sample photo)


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   
            •
          TOP Manufacturer:

          ERCOLINA - SCHWARZE-WIRTZ - TRANSFLUID -

          компендіум
          Софтвер
          Вміст старих машин
          Конфіденційність
          Слідкуйте за нами!
          © 2000 - 2024, Logotech oHG · Програмне забезпечення та Інтернет-послуги - Всі права захищені