'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Hydr. pressbrake

          Machinelist: Hydr. pressbrake


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER PR 100x2050


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96859 · Hydr. pressbrake

          BEYELER - PR 100x2050 - - 2008 -

          Technical details
          pressure 100 t︱chamfer lenght 2050 mm︱distance between columns mm︱stroke 415 mm︱dayligth 550 mm︱working flow 10 mm/s︱Control ︱total power requirement 7,50 kW︱weight of the machine ca. 7,50 t︱dimensions of the machine ca. 3,00 x 2,30 x 3,20 m︱
          • Control CYBELEC ModEva 12S • Controlled axes: Y1, Y2, X, X1, R, Z1, Z2 • CNC controlled crowning • Fiessler light barrier at the front • Hydraulic tool clamping RFA above + below • Tool package: Stamp P4 RFA Radius 3 mm 88° Height 175 mm: 1720mm
            pressure 100 t
            chamfer lenght 2050 mm
            stroke 415 mm
            dayligth 550 mm
            working flow 10 mm/s
            total power requirement 7,50 kW
            weight of the machine ca. 7,50 t
            dimensions of the machine ca. 3,00 x 2,30 x 3,20 m
            Description :
            • Control CYBELEC ModEva 12S
            • Controlled axes: Y1, Y2, X, X1, R, Z1, Z2
            • CNC controlled crowning
            • Fiessler light barrier at the front
            • Hydraulic tool clamping RFA above + below
            • Tool package:
            Stamp P4 RFA Radius 3 mm 88° Height 175 mm: 1720mm


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER PR 6


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96864 · Hydr. pressbrake

          BEYELER - PR 6 - - 2004 -

          Technical details
          pressure 060 t︱chamfer lenght 2050 mm︱distance between columns mm︱number of strokes - stepless ︱compressed air 8 bar︱closing speed 200 mm/sec︱total power requirement kW︱weight of the machine ca. 6,00 t︱dimensions of the machine ca. 3,00 x 2,10 x 2,35 m︱
          • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Hydraulic tool clamping above + below • CNC controlled crowning • 2 support arms • 1 set of upper tools, length approx. 2200mm, R1, segmented • 1 die set V12/88°, length approx. 2000mm, segmented
            pressure 060 t
            chamfer lenght 2050 mm
            compressed air 8 bar
            closing speed 200 mm/sec
            weight of the machine ca. 6,00 t
            dimensions of the machine ca. 3,00 x 2,10 x 2,35 m
            Description :
            • Controlled axes: Y1, Y2, X, R, Z1, Z2
            • Hydraulic tool clamping above + below
            • CNC controlled crowning
            • 2 support arms
            • 1 set of upper tools, length approx. 2200mm, R1, segmented
            • 1 die set V12/88°, length approx. 2000mm, segmented


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER PR6 1500 KN x 3100 MM


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308368 · Hydr. pressbrake

          BEYELER - PR6 1500 KN x 3100 MM - - 1997 -

          Technical details
          pressure 150 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 405 mm︱table width 150 mm︱ajustment speed 200 mm/sec︱working feed 10.0 mm/sec︱return speed 120 mm/sec︱stroke 215 mm︱dayligth 465 mm︱table height 960 mm︱operating pressure 320 bar︱oil volume 200 l︱voltage 3x 400 V︱total power requirement 15.0 KW︱weight of the machine ca. 9500 kg︱range L-W-H 3958 x 2350 x 2750 mm︱
          ** maintained condition (!!) Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP * numerical CNC control unit * 2D graphical programming & product display * Color screen * Tool & program library * clear and logically structured screen pages * Collision display * Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - CNC-controlled underbeam cambering (BEYELER system) - manual upper tool clamping - manual lower tool clamping - BEYELER hydraulic clamping/folding device (lower tool) - rear protective device (protective grille) - side protection device (protective doors) - various folding/bending tools - 1x freely movable 2 hand/foot control - Operating instructions (PDF) + circuit diagram * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308368
            pressure 150 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            column arm 405 mm
            table width 150 mm
            ajustment speed 200 mm/sec
            working feed 10.0 mm/sec
            return speed 120 mm/sec
            stroke 215 mm
            dayligth 465 mm
            table height 960 mm
            operating pressure 320 bar
            oil volume 200 l
            voltage 3x 400 V
            total power requirement 15.0 KW
            weight of the machine ca. 9500 kg
            range L-W-H 3958 x 2350 x 2750 mm
            Description :
            ** maintained condition (!!)

            Furnishing:
            - BEYELER electro-hydraulic CNC press brake
            - CNC control CYBELEC model DNC 800 HP
            * numerical CNC control unit
            * 2D graphical programming & product display
            * Color screen
            * Tool & program library
            * clear and logically structured screen pages
            * Collision display
            * Swivel operation, front right
            - CNC controlled axes (Y1+Y2-X-R-Z1+Z2)
            - CNC-controlled back gauge adjustment (X-axis)
            - CNC-controlled vertical adjustment of the stop beam (R-axis)
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - CNC-controlled underbeam cambering (BEYELER system)
            - manual upper tool clamping
            - manual lower tool clamping
            - BEYELER hydraulic clamping/folding device (lower tool)
            - rear protective device (protective grille)
            - side protection device (protective doors)
            - various folding/bending tools
            - 1x freely movable 2 hand/foot control
            - Operating instructions (PDF) + circuit diagram

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308368


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER PR6 1500 KN x 3100 MM


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96916 · Hydr. pressbrake

          BEYELER - PR6 1500 KN x 3100 MM - - 1997 -

          Technical details
          pressure 150 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 405 mm︱table width 150 mm︱ajustment speed 200 mm/sec︱working feed 10.0 mm/sec︱return speed 120 mm/sec︱stroke 215 mm︱dayligth 465 mm︱table height 960 mm︱operating pressure 320 bar︱oil volume 200 l︱voltage 3x 400 V︱total power requirement 15.0 KW︱weight of the machine ca. 9500 kg︱range L-W-H 3958 x 2350 x 2750 mm︱
          ** maintained condition (!!) Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP * numerical CNC control unit * 2D graphical programming & product display * Color screen * Tool & program library * clear and logically structured screen pages * Collision display * Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - CNC-controlled underbeam cambering (BEYELER system) - manual upper tool clamping - manual lower tool clamping - BEYELER hydraulic clamping/folding device (lower tool) - rear protective device (protective grille) - side protection device (protective doors) - various folding/bending tools - 1x freely movable 2 hand/foot control - Operating instructions (PDF) + circuit diagram
            pressure 150 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            column arm 405 mm
            table width 150 mm
            ajustment speed 200 mm/sec
            working feed 10.0 mm/sec
            return speed 120 mm/sec
            stroke 215 mm
            dayligth 465 mm
            table height 960 mm
            operating pressure 320 bar
            oil volume 200 l
            voltage 3x 400 V
            total power requirement 15.0 KW
            weight of the machine ca. 9500 kg
            range L-W-H 3958 x 2350 x 2750 mm
            Description :
            ** maintained condition (!!)

            Furnishing:
            - BEYELER electro-hydraulic CNC press brake
            - CNC control CYBELEC model DNC 800 HP
            * numerical CNC control unit
            * 2D graphical programming & product display
            * Color screen
            * Tool & program library
            * clear and logically structured screen pages
            * Collision display
            * Swivel operation, front right
            - CNC controlled axes (Y1+Y2-X-R-Z1+Z2)
            - CNC-controlled back gauge adjustment (X-axis)
            - CNC-controlled vertical adjustment of the stop beam (R-axis)
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - CNC-controlled underbeam cambering (BEYELER system)
            - manual upper tool clamping
            - manual lower tool clamping
            - BEYELER hydraulic clamping/folding device (lower tool)
            - rear protective device (protective grille)
            - side protection device (protective doors)
            - various folding/bending tools
            - 1x freely movable 2 hand/foot control
            - Operating instructions (PDF) + circuit diagram




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER RH 100-3100


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96900 · Hydr. pressbrake

          BEYELER - RH 100-3100 - - 1991 -

          Technical details
          pressure 100 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱column arm 255 mm︱stroke 215 mm︱dayligth 410 mm︱table height 890 mm︱ajustment speed 100 mm/sec︱working feed 6,5 mm/sec︱back stop - adjustable max. 500 mm︱oil volume 160 ltr.︱total power requirement 5,5 kW︱weight 7200 kg︱range L-W-H 3750 x 1450 x 2500 mm︱
          Furnishing: - electro-hydraulic press brake - CNC CYBELEC EURO III control unit - Control panel, right front - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control
            pressure 100 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            column arm 255 mm
            stroke 215 mm
            dayligth 410 mm
            table height 890 mm
            ajustment speed 100 mm/sec
            working feed 6,5 mm/sec
            back stop - adjustable max. 500 mm
            oil volume 160 ltr.
            total power requirement 5,5 kW
            weight 7200 kg
            range L-W-H 3750 x 1450 x 2500 mm
            Description :
            Furnishing:
            - electro-hydraulic press brake
            - CNC CYBELEC EURO III control unit
            - Control panel, right front
            - CNC electric back gauge (X axis)
            - 2x manually adjustable stop fingers
            - freely movable 2-hand/foot control
            - side protection device (protective grille)
            - rear protective device (protective grille)
            - Operating instructions machine + control




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER RH 100-3100


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308337 · Hydr. pressbrake

          BEYELER - RH 100-3100 - - 1991 -

          Technical details
          pressure 100 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱column arm 255 mm︱stroke 215 mm︱dayligth 410 mm︱table height 890 mm︱ajustment speed 100 mm/sec︱working feed 6,5 mm/sec︱back stop - adjustable max. 500 mm︱oil volume 160 ltr.︱total power requirement 5,5 kW︱weight 7200 kg︱range L-W-H 3750 x 1450 x 2500 mm︱
          Furnishing: - electro-hydraulic press brake - CNC CYBELEC EURO III control unit - Control panel, right front - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308337
            pressure 100 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            column arm 255 mm
            stroke 215 mm
            dayligth 410 mm
            table height 890 mm
            ajustment speed 100 mm/sec
            working feed 6,5 mm/sec
            back stop - adjustable max. 500 mm
            oil volume 160 ltr.
            total power requirement 5,5 kW
            weight 7200 kg
            range L-W-H 3750 x 1450 x 2500 mm
            Description :
            Furnishing:
            - electro-hydraulic press brake
            - CNC CYBELEC EURO III control unit
            - Control panel, right front
            - CNC electric back gauge (X axis)
            - 2x manually adjustable stop fingers
            - freely movable 2-hand/foot control
            - side protection device (protective grille)
            - rear protective device (protective grille)
            - Operating instructions machine + control

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308337


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER RH 60x2050


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308363 · Hydr. pressbrake

          BEYELER - RH 60x2050 - - 1990 -

          Technical details
          pressure 60.0 t︱chamfer lenght 2050 mm︱distance between columns 1550 mm︱column arm 255 mm︱stroke 165 mm︱dayligth 360 mm︱table height 890 mm︱ajustment speed 85.0 mm/sec︱working feed 6,5 mm/sec︱back stop - adjustable max. 500 mm︱oil volume 100 ltr.︱total power requirement 4,0 kW︱weight 4600 kg︱range L-W-H 2700 x 1450 x 2400 mm︱
          ** Machine from a workshop for the disabled ** maintained condition (!!) Furnishing: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit * high resolution screen * Clear, concise menus in the operator's language * Tools and products library - Control panel, right front - CNC controlled axes: Y1 + Y2 + X axis - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - AMADA-SYSTEM A upper tool adapter including upper wedge crowning * very many bending/insertion tools (stamps + matrices) - 2x front material/sheet metal support arms - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308363
            pressure 60.0 t
            chamfer lenght 2050 mm
            distance between columns 1550 mm
            column arm 255 mm
            stroke 165 mm
            dayligth 360 mm
            table height 890 mm
            ajustment speed 85.0 mm/sec
            working feed 6,5 mm/sec
            back stop - adjustable max. 500 mm
            oil volume 100 ltr.
            total power requirement 4,0 kW
            weight 4600 kg
            range L-W-H 2700 x 1450 x 2400 mm
            Description :
            ** Machine from a workshop for the disabled
            ** maintained condition (!!)

            Furnishing:
            - CNC electro-hydraulic press brake
            - CNC CYBELEC EURO IV control unit
            * high resolution screen
            * Clear, concise menus in the operator's language
            * Tools and products library
            - Control panel, right front
            - CNC controlled axes: Y1 + Y2 + X axis
            - CNC electric back gauge (X axis)
            - 2x manually adjustable stop fingers
            - AMADA-SYSTEM A upper tool adapter including upper wedge crowning
            * very many bending/insertion tools (stamps + matrices)
            - 2x front material/sheet metal support arms
            - freely movable 2-hand/foot control
            - side protection device (protective grille)
            - rear protective device (protective grille)
            - Operating instructions machine + control

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308363


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER RH 60x2050


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96905 · Hydr. pressbrake

          BEYELER - RH 60x2050 - - 1990 -

          Technical details
          pressure 060 t︱chamfer lenght 2050 mm︱distance between columns 1550 mm︱column arm 255 mm︱stroke 165 mm︱dayligth 360 mm︱table height 890 mm︱ajustment speed 85.0 mm/sec︱working feed 6,5 mm/sec︱back stop - adjustable max. 500 mm︱oil volume 100 ltr.︱total power requirement 4,0 kW︱weight 4600 kg︱range L-W-H 2700 x 1450 x 2400 mm︱
          ** Machine from a workshop for the disabled ** maintained condition (!!) Furnishing: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit * high resolution screen * Clear, concise menus in the operator's language * Tools and products library - Control panel, right front - CNC controlled axes: Y1 + Y2 + X axis - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - AMADA-SYSTEM A upper tool adapter including upper wedge crowning * very many bending/insertion tools (stamps + matrices) - 2x front material/sheet metal support arms - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control
            pressure 060 t
            chamfer lenght 2050 mm
            distance between columns 1550 mm
            column arm 255 mm
            stroke 165 mm
            dayligth 360 mm
            table height 890 mm
            ajustment speed 85.0 mm/sec
            working feed 6,5 mm/sec
            back stop - adjustable max. 500 mm
            oil volume 100 ltr.
            total power requirement 4,0 kW
            weight 4600 kg
            range L-W-H 2700 x 1450 x 2400 mm
            Description :
            ** Machine from a workshop for the disabled
            ** maintained condition (!!)

            Furnishing:
            - CNC electro-hydraulic press brake
            - CNC CYBELEC EURO IV control unit
            * high resolution screen
            * Clear, concise menus in the operator's language
            * Tools and products library
            - Control panel, right front
            - CNC controlled axes: Y1 + Y2 + X axis
            - CNC electric back gauge (X axis)
            - 2x manually adjustable stop fingers
            - AMADA-SYSTEM A upper tool adapter including upper wedge crowning
            * very many bending/insertion tools (stamps + matrices)
            - 2x front material/sheet metal support arms
            - freely movable 2-hand/foot control
            - side protection device (protective grille)
            - rear protective device (protective grille)
            - Operating instructions machine + control




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER RT 25x700 - CNC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4021132 · Hydr. pressbrake

          BEYELER - RT 25x700 - CNC - - 1986 -

          Technical details
          pressure 25 t︱chamfer lenght 700 mm︱
            pressure 25 t
            chamfer lenght 700 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact

          Press Brake - Hydraulic

          used Sheet metal working / shaeres / bending Press Brake - Hydraulic BEYELER PR6  150 x 4100


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3778 · Press Brake - Hydraulic

          BEYELER - PR6 150 x 4100 - - 1999 - Cybelec ModEva15T

          Technical details
          pressure 150 t︱chamfer lenght 4100 mm︱stroke max. 315 mm︱Control Cybelec ModEva15T ︱pressing speed 1 --> 10 mm/sec︱closing speed max. 200 mm/sec︱Stop Time max. 110 mS︱compressed air max 8 bar︱rules for accident prevention 05.2024 ︱DGUV 2025 ︱total power requirement kW︱weight of the machine ca. 13,2 t︱
          - Automatic bounce compensation - Hydraulic crowning of the lower beam - Table with hydraulic die clamping - 2 pieces of aluminum support arms with 3 grooves including stainless scale and Angle stop - hydraulic ram clamping type “RF-A” - Hydraulic unit for punch and die clamping - Lifting and installation height increase by 100 mm - Roller conveyor guide on the front of the lower beam for front support arms - 2 pieces of H-axes manually with handwheel (height adjustment of the front Support arms over 200 mm, the weight is balanced by gas springs) - 2 pieces of hydraulic bending aids - 1st and 2nd measuring point for the Mini-Rotax angle measuring device - Hold up at the back gauge - 2 "parking spaces" for the support arms and bending aid (500 mm left, 500 mm right)
            pressure 150 t
            chamfer lenght 4100 mm
            stroke max. 315 mm
            Control Cybelec ModEva15T
            pressing speed 1 --> 10 mm/sec
            closing speed max. 200 mm/sec
            Stop Time max. 110 mS
            compressed air max 8 bar
            rules for accident prevention 05.2024
            DGUV 2025
            weight of the machine ca. 13,2 t
            Description :
            - Automatic bounce compensation
            - Hydraulic crowning of the lower beam
            - Table with hydraulic die clamping
            - 2 pieces of aluminum support arms with 3 grooves including stainless scale and
            Angle stop
            - hydraulic ram clamping type “RF-A”
            - Hydraulic unit for punch and die clamping
            - Lifting and installation height increase by 100 mm
            - Roller conveyor guide on the front of the lower beam for front support arms
            - 2 pieces of H-axes manually with handwheel (height adjustment of the front
            Support arms over 200 mm, the weight is balanced by gas springs)
            - 2 pieces of hydraulic bending aids
            - 1st and 2nd measuring point for the Mini-Rotax angle measuring device
            - Hold up at the back gauge
            - 2 "parking spaces" for the support arms and bending aid (500 mm left, 500 mm
            right)


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Buy used hydraulic press brakes from LagerMaschinen
          Hydraulic press brakes from LagerMaschinen are a great idea

          When purchasing machines for your newly opened or expanding company the prices of brand new machines can be daunting or downright limiting. With LagerMaschinen the customer is able to research find and purchase the hydraulic press breaks that fit their needs as well as being reasonably priced. LagerMaschinen's online platform is designed to give customers and sellers alike what they need: an appropriate space for communication regarding hydraulic press brakes to be bought and sold technical specifications and measurements and delivery and installation services. LagerMaschinen's goal is to provide everyone with what they need to best meet their professional and financial goals. By working with LagerMaschinen your search for the right hydraulic press brakes is faster more informed and more affordable.

          Used hydraulic press brakes from LagerMaschinen

          Hydraulic press brakes are used to bend metal - most often sheet metal - to the appropriate size and shape needed. These machines are used in a wide variety of industries serving as either part of a series of production steps or as the primary machine needed. Certain hydraulic press brakes are additionally fitted with different dies such as v-dies (producing a 'v' shape) offset dies (forming a 'z' shape) or curling dies (curling the end of the sheet metal. Hydraulic press brakes are more high-powered safer (as they can be stopped more easily in the event of an emergency) and produce more uniform results. With LagerMaschinen's wide inventory of hydraulic press brakes and other machines you'll surely find the product that's right for your production needs.