Crimping Machine
Machinelist: Crimping Machine
Hydr. pressbrake
- Hans Klein Werkzeugmaschinenhandel GmbH
- Im Mühlgut 2-4
- 77815 Bühl
- Deutschland
-
0049 (0) 7223 9617-0
0049 (0) 7223 58512 -
info@klein-werkzeugmaschinen.de
www.klein-werkzeugmaschinen.de
#1052-01055 · Hydr. pressbrake
JONESCHEIT - HAMBURGER HYPM 70-2600 - - unbekannt -
Technical details
Accessories: upper and lower die (each in segments) on 2500 mm length, 2 upper die segments each 835 mm long, back stop
Datasheet
Request / Contact
- SKM Industriemaschinen
- Röntgenstr. 3
- 89264 Weißenhorn
- Deutschland
-
+49 (0) 7309 954 986 0
+49 (0) 7309 954 986 1 -
info@skm-maschinen.de
www.skm-maschinen.de
#2032-1747 · Hydr. pressbrake
TECMASCHIN - APH630 - - 2021 - E21
Technical details
including upper tool including die Bending capacity steel: 2.5 mm to 3,200 mm *Machine may not comply with current UVV guidelines* *We expressly point out that we assume no responsibility for this* *Machine is sold as is*
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-96913 · Hydr. pressbrake
DARLEY - EHP-LS 320.32/27 - - 2011 -
Technical details
Only 5406.9 operating hours read • Delem DA-65W control • LazerSafe light barrier • Controlled axes: Y1, Y2, X, X1 (oblique), Z1, Z2 • 2 x support arms with parking position on the side • CNC controlled crowning • Hydraulic tool clamping at top + bottom • Extensive tool set, with very large dies for machines / steel construction
- SK Maschinen-Service GmbH
- Tackweg 4
- 47918 Tönisvorst
- Deutschland
-
02151 79350
02151 793535 -
info@sk-maschinen.de
www.sk-maschinen.de
#1038-21006 · Hydr. pressbrake
TRUMPF - TruBend 3120 - - 2011 -
Technical details
control: 2D-colour-graphic control DELEM T 3000 inclusive tooling
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9308378 · Hydr. pressbrake
ERMAK - CNC HAP 3100x200 - - 2008 -
Technical details
** current new price approx. 80.000 euros ** Special price on request Furnishing: - electro-hydraulic CNC press brake - CYBELEC CNC control model DNC 60 HP * swiveling operation, front left * numerical control * Tool and product library - CNC controlled axes: Y1 - Y2 - X axis - CNC electro-motorized back gauge (X axis) * with 2x manually adjustable stop fingers (R+Z axis) * Travel X = 800 mm - manual table cambering, adjustment via handwheel * with analogue value display - Upper tool holder with wedge crowning (AMADA) - 1x set of split upper tools - 1x MULTI V reversible die block - SICK light barrier in front of the machine (safety device) - Light barrier behind the machine (safety device) - side protection device (pivoting doors) - 2x front support arms "sliding system", with T-slot and tilting cam - 1x freely movable double foot control - User manual (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308378 * Machine video: https://www.youtube.com/watch?v=H4O044HEfRQ
Datasheet
Request / Contact
- Broziat GmbH
- Vorwerker Str. 62a-64
- 23554 Lübeck
- Deutschland
-
+49 451 40 40 19
+49 451 40 73 93 -
info@Broziat.de
https://broziat.com
#2040-100451 · Hydr. pressbrake
TRUMPF - TruBend 5170 (B03) - - 2008 -
Technical details
The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. 1 Option: Machine installation and operator training at buyers location: Surcharge 1.600 € plus Transport and traveling costs - Top drive concept in four-cylinder design - Electrohydraulic ram drive in proportional valve technology - ram displacement measuring system - modern block hydraulics - Elktronische pressure balance - spherical suspension and tilt of the pressure beam - CNC backgauge system - secure finger adjustment from the front - 2 pcs stop finger - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, hydraulic lower tool holder - flat front cover - modern protective cover, - CE mark - Oil cooler - Control cabinet cooling (air-air) - Operation manual
- B&R Service GmbH
- Esslingerstr.8
- 73776 Altbach
- Deutschland
-
+49 (0)7153 99 46 565
+49 (0)7153 99 46 568 -
info@b-r-service.de
www.b-r-service.de
#2025-0822338 · Hydr. pressbrake
TRUMPF - V 500 - - 2005 - Task
Technical details
- IMZ Maschinen Vertriebs GmbH
- Marie-Curie-Straße 19
- 73529 Schwäbisch Gmünd
- Deutschland
-
0049 (0) 7171 987130
0049 (0) 7171 9871329 -
info@imz.de
www.imz.de
#1075-7037 · Hydr. pressbrake
AMADA - Astro 100 NT HDS-1030 - - 2004 - AMADA AMNC II-PC
Technical details
Includes: -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm -Status indicator light -5-axis backgauge with stop sensor system Folding robot: ASTRO-100 NT Includes: -Standard gripper -Reposition gripper on the upper press beam -Regripping support for large workpieces - pneumatically driven Technical data see PDF attachment. Handling robot: ASTRO-MP20 Includes: -Loading table with spreading magnets -Vacuum gripper "Medium" and "Large" -Combi gripper (suction/gripping) for vertical loading -Device for vertical loading of up to 120 parts Technical data see PDF attachment. Operating hours: 73000 h Miscellaneous: -Installation briefing of the entire cell -Safety equipment according to CE: safety fences with electrically interlocked doors -Transformer for the entire cell -External software AP-100 and ASTRO-CAM -DELL PC -Wila punch clamping (New Standard Clamping I) incl. hydraulic unit -2.loading station for parts up to max. 500x500mm -Side stop for loading table, manually adjustable -2500mm floor travelling track for the ASTRO-MP 20 handling robot -CCD camera system for checking the position of the blank -Conveyor belt 4000x700mm, height 750mm for finished parts -Modification of the safety device - integration of the conveyor belt and glass Glass instead of fence on the front of the system -PC for external programming -4 x grippers: IG 0725, ZG 0725, IF 0725, TF 3025 Machine is in very good condition. The technical data has been compiled to the best of our knowledge, for which we cannot accept any liability.
Datasheet
Request / Contact
- Hop Machines
- Wethouder Lindersstraat 145
- 5455 GK Wilbertoord
- Niederlande
-
+31 (0)485478107
-
info@hopmachines.nl
www.hopmachines.nl
#2018-5517 · Hydr. pressbrake
Ermak - AP 2600-80 - - 2004 - Siemens Sinamics G110
Technical details
Datasheet
Request / Contact
- Gustav Schönberger GmbH
- Hünderstr. 14
- 74080 Heilbronn
- Deutschland
-
(0049)7131 46060
(0049)7131 460620 -
schoenberger@gsh-maschinen.de
www.gsh-maschinen.de
#1036-105348 · Hydr. pressbrake
BAYKAL - APH 3108/160 - - 2001 -
Technical details
motorized arrester tools Technische Daten / technical details: Druck / pressure 160 to Abkantlänge / bending lenght 3100 mm Durchgang zwischen den Ständern / distance between columns 2550 mm Ausladung / overhang 310 mm Antriebsleistung / drive capacity 11 kW Gewicht / weight 8500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-1626 · Hydr. pressbrake
ATLANTIC - HPE 50 230 - - 2000 -
Technical details
- 4 stop fingers - Crowning device - Adjustment of the finger height manually via crank 140 mm - Groove in the front of the table - various tools
- Amann Werkzeugmaschinen GmbH
- Landshuter Straße 1
- 85716 Unterschleißheim
- Deutschland
-
(0049) 89 317754 0
(0049) 89 3174262 -
info@amann-wzm.de
www.amann-wzm.de
#1006-92335 · Hydr. pressbrake
DURMA - HAP 30120 - - 1999 - ELGO P8822
Technical details
Overtravel measurement Y-;X-axis motorized (Push button and NC controlled) split bending punch 90°/125mm high Multi-V die 100x100mm / ~ V10,V10,V12,V16,V22,V50,V60 2 height-adjustable stop fingers Two-hand/foot operation Work area safety doors (electrically protected)
Datasheet
Request / Contact
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-4021147 · Hydr. pressbrake
EHT - VarioPress 125-50 - - 1998 - Cybelec ModEva
Technical details
- MS Maschinenhandel GmbH
- Unterdorf 34
- 6532 Ladis
- Österreich
-
+43 547221907
+43 54722190722 -
info@ms-maschinen.at
www.ms-maschinen.at
#2034-165 · Hydr. pressbrake
AMADA - APX 80.25 - - 1997 - operateur
Technical details
- MWB GmbH & CO. KG
- Parkstraße 12
- 09456 Annaberg-Buchholz
- Deutschland
-
+49 3733 5068501
-
info@mwb-machinetrade.com
https://www.mwb-machinetrade.com
#2069-7839 · Hydr. pressbrake
HÄMMERLE - BM 200-3100 - - 1997 - Infinitron
Technical details
Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets by separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide technical description Slim stand principle with 500 mm free passage. The stands are provided with swivel bearings on which the table is placed. On the one hand, the cylinders are screwed between the side stands and clearly positioned by means of wedges. On the other hand, the cylinders are bolted to the support at the front and rear, resulting in a stabilizing frame construction. The hydraulic tank is screwed between the side stands and contains all the block hydraulics for controlling the individual machine elements such as the tappet drive, tool clamping, die slide device, etc. The movement of the plunger is controlled by electronically controlled proportional valves, a gray scale being provided on each side of the plunger for precise measurement of the position. Both the parallel position and the exact lower action point position are controlled by the CNC control via the valves mentioned, with a stopping accuracy of 0 / - 0.01 mm being maintained at the bottom dead centre. The frame suspension (frame on suspension) is compensated on both sides by mounting the gray scales on separate supports that are attached directly to the table. The ram is rapidly advanced by ancestors under the influence of its own weight, whereby the press cylinders are supplied with oil by means of large suction valves. After the switchover point from the forward speed to the working speed has been reached, the plungers are supplied with oil from the main pump via the proportional valves. The steel press cylinders are double-acting, with the piston rods being connected to the ram by cambered supports and elastic intermediate links. A safety control independent of the electronics registers the parallel position of the ram and switches the machine off immediately if, due to a fault in the electronics of the ram, it does not remain in the parallel position. Otherwise, the dangerous functions of the hydraulics are automatically checked and secured in accordance with the latest accident prevention regulations. The electrical cabinet on the right side of the machine essentially contains the power section, the computer section and the safety section. The connections from the electrical box to the mechanical part are made using plug connections. The machine and accessories comply with the currently applicable provisions of Directive 89/392 / EEC (machines) amended by Directives 91/368 / EEC and 93/44 / EEC. The machine price includes the required side and rear protective grilles and two-hand operation with a safety stop.
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-12337 · Hydr. pressbrake
OMAG - PSB 5026 / CNC Sintesi - - 1996 - Sintesi
Technical details
Hydraulic press brake with Sintesi microprocessor control for the axes Y1 + Y2 immersion depth and x back gauge. The control calculates and controls the immersion depth by specifying the bending angle and the position of the back gauge. There are many split upper tools in the shape of a doe's foot and a pointed design, as well as a heavily cranked upper tool in 1000 mm. The machine was used in a well-kept small business to produce special stainless steel parts for kitchens, laboratories and clinics and was only operated by the owner. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-695168 · Hydr. pressbrake
TRUMPF - TRUMABEND V 85 - - 1996 - TRUMPF Delem DA 65T
Technical details
T R U M P F (Germany) CNC - Controlled Hydraulic Press Brake Model TRUMABEND V 85, year 1996 Serial No. 88 31 52 __________________________________________________________________________________ Pressure, max. 85 to Working width, max. 2.050 mm Working width between columns 1,750 mm Side daylight of each column 410 mm Max. distance between upper and lower tool holder w/o tools 350 mm Adjustment of upper tool holder approx. 300 mm Table width approx 105 mm Height of Table from floor approx. 1.050 mm Max. stroke 215 mm Stroke, bending speed 1 - 10 mm/sec Stroke, rapid traverse 200/135 mm/sec Adjustment range of back gauge, approx. 800 x 300 (vertical) mm Total electrical load, approx. 10 kW - 400 V - 50 Hz Weight, approx. 7,5 to Accessories / Special Features: * The stroke movement of the upper toolslide is driven by two hydraulic pistons and proportional valves and controlled by two electronic measurement scales. Therefore it can be achieved a tilting line of the upper tool of approx. 10 mm * TRUMPF – CNC Control model DELEM Type DA 65 T with 6 controllable Axis like: Y1, Y2, X, R, Z1 a. Z 2, with direct programming of bending cycles on the pendant control and screen with grafics. * CNC-Controlled Cambering by separate control unit inside the table. * Hydraulic driven fast clamping of upper and lower tools * On backside of machine mounted a gauge stop slide controlled in 2 axis ( =R a.X-Axis) in vertical stroke and forward and backwards, three sheet metal stopfingers. * Two-handed release on mobile control stand, and/or foot switch. * Pressure Manometer for the Hydraulic System and oil filter * In front of machine there are 2 lengthwise adjustable sheet metal supports. * Various Bending tools smaller size, * Swivable Safety covers on side and backside doors with plexi-glass shields, etc. Condition : Good to very good – stable design. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
- Feyen Maschinen GmbH
- Gelleperstr. 10
- 47809 Krefeld
- Deutschland
-
0049 (0)2151/5267-0
0049 (0)2151/5267-39 -
info@feyen.de
www.feyen.de
#1053-002825 · Hydr. pressbrake
LVD - PPI 55 /20 MNC 95 - - 1995 - MNC95c4
Technical details
• 2 hand-operation with foot switch, • safety device, Model: SICK, type V 4000, • controlled R-axis, • man. quick clamping of the upper tool,
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-093033A · Hydr. pressbrake
FISCHER - HAKS 10/3200 - - 1993 - konventionell
Technical details
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-03140 · Hydr. pressbrake
EHT - EHP S 320-7250 - - 1991 -
Technical details
- Knops Werkzeugmaschinen
- Konrad-Zuse-Straße 5
- 40789 Monheim
- Deutschland
-
02173 - 39494-0
02173 - 39494-29 -
maschinen@knops.de
www.knops.de
#1022-H08822 · Hydr. pressbrake
HÄMMERLE - AP200-3100 - - 1986/2011 retrofit - Addcobend Infinitron
Technical details
CNC control: Addcobend Infinitron Press force: 2000 KN Bending length: 3100 mm Distance between columns 2780 mm Clear distance between columns 2780 mm Projection of the stands 300 mm Back gauge - adjustable 1600 mm Stroke max. 400 mm Space required length 4300 mm Space requirement width 2650 mm Total height 3800mm Total weight about 18000 kg Machine hours 2011: 21226 h Machine hours today: approx. 23000-25000h Retrofit: 2011: approx. CHF 86,000 • Basic remodeling • Exchange Axodyn controller units (X & M axis) • Replacement of control relays and Telemecanique PLCs with safety PLCs • Replacement of power relays and thermal overcurrent trips • Double foot switch with additional function • Angle adapter for hand station suspension • Grid connection 2013: CHF 27,000 • 3D bendview post processor • 3D Bendview retrofit package • Exchange 3.5» floppy drive for USB interface • Software and License • 3D bend viewer software Tools included: 1. 001-002 sword stamp 3 meters 2. 7 matrix almost 3 meters 3. 12 matrix 3 meters 4. 16 matrix 3 meters 5. Possibly an embossing tool 3 meters
- GWM GmbH
- Gewerbestr. 2
- 79639 Grenzach-Wyhlen
- Deutschland
-
(0049) 7624 9082 0
07624 9082-206 -
info@gromag.ch
www.gromag.ch
#1044-3284 · Hydr. pressbrake
LVD - PPBL 100 /30 - - 1985 -
Technical details
incl. various used upper and lower tools control: CYB.3200 serial number: 11.240 serial number: 16.523.0/2 CNC Cybelec 3200
- Christoph Busch GmbH
- Dieselstr. 22
- 41352 Korschenbroich
- Deutschland
-
+49 (0) 2182 570 5930
+49 (0) 2182 5785202 -
mail@busch-gruppe.de
www.busch-gruppe.de
#2052-06513 · Hydr. pressbrake
WIEGER - AWH C 100/30 - - 1982 -
Technical details
- WeMa Antonius Pigge GmbH
- Barnstorfer Str. 3
- 49424 Goldenstedt
- Deutschland
-
+49 (0)444496700
+49 (0)4444967010 -
info@wema-pigge.de
www.wema-pigge.de
#2031-3418 · Hydr. pressbrake
MENGELE - D80-2 - - 1981 - keine
Technical details
The machine was previously equipped with a CNC control, now converted to electrically manual operation. Digital display for backgauge. electrical stroke adjustment Machine is functional and has been used sporadically for the past 15 years, as previous owner preferred to use a folding machine. tools included: 1 set of upper tool 1 lower tool (die block)
Datasheet
Request / Contact