'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          coil line

          Machinelist: coil line


          coil line

          used Sheet metal working / shaeres / bending coil line 1SCHLEICHER/GSW


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-531 · coil line

          1SCHLEICHER/GSW - - - unbekannt -

          Technical details
          material width 300 mm︱coil weight 3 t︱material thickness 2 - 4 mm︱
          CNC roll feed, Make GSW, Type WVE 400/160 - weight 50/80 kg Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW
            material width 300 mm
            coil weight 3 t
            material thickness 2 - 4 mm
            Description :
            CNC roll feed, Make GSW, Type WVE 400/160
            - weight 50/80 kg

            Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160
            - band width 300 mm
            - band thickness 2 – 4 mm
            - cross cut 1200 mm²
            - voltage 220/380 V 50 Hz
            - total power requirement 3,1 kW

            coiler with press roll, Make Schleicher, Type H-3
            - Coil weight 3 t
            - Band width 400 mm
            - voltage 220/380 V 50 Hz
            - total power requirement 3,92 kW



        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line GSW SHR 5000 / VCRL 650


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103046 · coil line

          GSW - SHR 5000 / VCRL 650 - - 2000 - konventionell

          Technical details
          material width 600 mm︱coil weight 5,0 t︱material thickness - 5,0 mm︱coil internal diameter 360 - 660 mm︱coil external diameter 1500 mm︱no. of straightening rolls 9 ︱straightening roll diameter 80 mm︱number of draw-in rolls 2 ︱material cross-cut 1600 mm²︱power requirement kW︱weight of feeeder-straightener 2,5 t︱weight of decoiler 1,5 t︱dimensions feeder-straightener (WxDxH) 1,7 x 1,7 x 2,6 mm︱dimensions decoiler (WxDxH) 1,8 x 2,0 x 2,3 mm︱
          Feeder-straightening machine VCRL 650 (year of manufacture1994 / overhauled 2001) with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, intermittent lifting Decoiler SHR 5000 (year of manufacture 2000) with hydraulic expansion, snubber roll
            material width 600 mm
            coil weight 5,0 t
            material thickness - 5,0 mm
            coil internal diameter 360 - 660 mm
            coil external diameter 1500 mm
            no. of straightening rolls 9
            straightening roll diameter 80 mm
            number of draw-in rolls 2
            material cross-cut 1600 mm²
            weight of feeeder-straightener 2,5 t
            weight of decoiler 1,5 t
            dimensions feeder-straightener (. 1,7 x 1,7 x 2,6 mm
            dimensions decoiler (WxDxH) 1,8 x 2,0 x 2,3 mm
            Description :
            Feeder-straightening machine VCRL 650
            (year of manufacture1994 / overhauled 2001)
            with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, intermittent lifting
            Decoiler SHR 5000 (year of manufacture 2000)
            with hydraulic expansion, snubber roll


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 2352 B-FPS / SC 12-FQ


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083096 · coil line

          DREHER - 2352 B-FPS / SC 12-FQ - - 1997 - Siemens S 5

          Technical details
          material width 300 mm︱coil weight 2 x 1,25 t︱material thickness 0,4 - 1,2 mm︱coil internal diameter 320 - 420 mm︱coil external diameter 1300 mm︱no. of straightening rolls 9 ︱straightening roll diameter 30 mm︱number of draw-in rolls 2 ︱roll diameter 30 mm︱speed 3 - 30 m/min︱feed length 0 - 9999,9 mm︱power requirement 3,0 + 2,5 kW︱weight of decoiler 0,7 t︱dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm︱weight of straightening machine 0,45 t︱dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm︱weight of the feeder 0,4 t︱dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm︱
          Universal straightening machine SC 12-FQ with infinitely variable drive double decoiler 2352 B-FPS WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls
            material width 300 mm
            coil weight 2 x 1,25 t
            material thickness 0,4 - 1,2 mm
            coil internal diameter 320 - 420 mm
            coil external diameter 1300 mm
            no. of straightening rolls 9
            straightening roll diameter 30 mm
            number of draw-in rolls 2
            roll diameter 30 mm
            speed 3 - 30 m/min
            feed length 0 - 9999,9 mm
            power requirement 3,0 + 2,5 kW
            weight of decoiler 0,7 t
            dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm
            weight of straightening machine 0,45 t
            dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm
            weight of the feeder 0,4 t
            dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm
            Description :
            Universal straightening machine SC 12-FQ
            with infinitely variable drive
            double decoiler 2352 B-FPS
            WITHOUT drive, with hydraulic expansion, pneumatic lag brake
            electronic roll feed WAV-RDS-2Z, modell 1082 B
            with AC-Servomotor, pneumatic intermediate lifting of the rolls


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line HENSEL BRMS 4/500/10  /  BSH 3-500  /


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-194014V · coil line

          HENSEL - BRMS 4/500/10 / BSH 3-500 / - - 1996 - konventionell

          Technical details
          material width 500 mm︱coil weight 2,5 t︱material thickness 0,2 - 3,0 mm︱coil internal diameter 480 - 530 mm︱coil external diameter 1300 mm︱material cross-cut 1000 mm²︱no. of straightening rolls 10 ︱straightening roll diameter 80 mm︱number of draw-in rolls 2 ︱roll diameter 120 mm︱Material thickness feeder 0,2 - 5,0 mm︱material cross-cut feeder 1000 mm²︱roll diameter 100 mm︱speed 20 m/min︱power requirement 4,0 + 1,1 kW︱weight of straightening machine 2,3 t︱dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm︱weight of decoiler 0,95 t︱dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm︱weight feeder t︱
          Straightening machine HENSEL BRMS 4/500/10 with infinitely variable drive Decoiler HENSEL BSH 3-500 mith motor for fix speed, auxiliary drive (declutchable), pneumatic snubber roll Electronic roll feed HENSEL EVX 500 with hydraulic intermediate lifting of the rolls Material thickness of feeder approx. 0,2 - 5,0 mm with coil loop control via light guard
            material width 500 mm
            coil weight 2,5 t
            material thickness 0,2 - 3,0 mm
            coil internal diameter 480 - 530 mm
            coil external diameter 1300 mm
            material cross-cut 1000 mm²
            no. of straightening rolls 10
            straightening roll diameter 80 mm
            number of draw-in rolls 2
            roll diameter 120 mm
            Material thickness feeder 0,2 - 5,0 mm
            material cross-cut feeder 1000 mm²
            roll diameter 100 mm
            speed 20 m/min
            power requirement 4,0 + 1,1 kW
            weight of straightening machine 2,3 t
            dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm
            weight of decoiler 0,95 t
            dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm
            Description :
            Straightening machine
            HENSEL BRMS 4/500/10
            with infinitely variable drive
            Decoiler
            HENSEL BSH 3-500
            mith motor for fix speed, auxiliary drive (declutchable), pneumatic snubber roll
            Electronic roll feed
            HENSEL EVX 500
            with hydraulic intermediate lifting of the rolls
            Material thickness of feeder approx. 0,2 - 5,0 mm
            with coil loop control via light guard


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 1676 AV-RA2 / 2370 B


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1740 · coil line

          DREHER - 1676 AV-RA2 / 2370 B - - 1995 -

          Technical details
          material width 200 mm︱coil weight 1,5 t︱material thickness 0,8 - 4,2 mm︱straightening roll diameter 80 mm︱Number of straightening rolls 7 Pcs.︱
          Coil turner 2370 B Load capacity 1.5 ton. Bandwidth 300 mm Coil inner diameter: 400 - 500 mm Arm length per arm: 670 mm Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm Weight: 760 kg. Straightener Dreher 1676 AV-RA2 Material width: 200 mm Material thickness: 08 - 4.2 mm Number of straightening rollers: 7 Number of pull rollers: 4 Straightening rollers diameter: 80 mm Would be down by a running press Documents circuit diagrams, operating instructions etc. available
            material width 200 mm
            coil weight 1,5 t
            material thickness 0,8 - 4,2 mm
            straightening roll diameter 80 mm
            Number of straightening rolls 7 Pcs.
            Description :
            Coil turner 2370 B
            Load capacity 1.5 ton.
            Bandwidth 300 mm
            Coil inner diameter: 400 - 500 mm
            Arm length per arm: 670 mm
            Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm
            Weight: 760 kg.

            Straightener Dreher 1676 AV-RA2
            Material width: 200 mm
            Material thickness: 08 - 4.2 mm
            Number of straightening rollers: 7
            Number of pull rollers: 4
            Straightening rollers diameter: 80 mm

            Would be down by a running press
            Documents circuit diagrams, operating instructions etc. available


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line KOHLER / WEINGARTEN 50.650/9-7500.1 / WEP 65


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233027 · coil line

          KOHLER / WEINGARTEN - 50.650/9-7500.1 / WEP 65 - - 1995 - konventionell

          Technical details
          material width 650 mm︱coil weight 7,5 t︱material thickness 0,6 - 4,0 mm︱coil internal diameter 460 - 530 (630) mm︱coil external diameter 1300 mm︱material cross-cut 1300 mm²︱no. of straightening rolls 9 ︱straightening roll diameter 60 mm︱number of draw-in rolls ︱roll diameter mm︱speed 1 - 30 m/min︱power requirement 30,0 kW︱weight of straightening machine t︱dimensions straightener (WxDxH) mm︱weight of decoiler t︱dimensions decoiler (WxDxH) mm︱weight feeder t︱dimensions feeder (WxDxH) m︱
          Straightening machine KOHLER 50.650/9 with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette Decoiler KOHLER 7500.1 with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table Servo roll feed WEINGARTEN WEP 65 coil loop control via light guard
            material width 650 mm
            coil weight 7,5 t
            material thickness 0,6 - 4,0 mm
            coil internal diameter 460 - 530 (630) mm
            coil external diameter 1300 mm
            material cross-cut 1300 mm²
            no. of straightening rolls 9
            straightening roll diameter 60 mm
            speed 1 - 30 m/min
            power requirement 30,0 kW
            Description :
            Straightening machine KOHLER 50.650/9
            with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette
            Decoiler KOHLER 7500.1
            with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table
            Servo roll feed WEINGARTEN WEP 65
            coil loop control via light guard


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line NORMATIC DY 500 X3000


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163021A · coil line

          NORMATIC - DY 500 X3000 - - 1994 - konventionell

          Technical details
          material width 500 mm︱coil weight 3,0 t︱material thickness 0,2 - 2,5 mm︱coil internal diameter 470 - 530 mm︱coil external diameter 1400 mm︱no. of straightening rolls 9 ︱straightening roll diameter 40 mm︱number of inlet and outlet rolls 4 ︱material cross-cut 1200 mm²︱speed 1,5 - 30 m/min︱Power capacity kW︱dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m︱weight decoiler 1,1 t︱dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m︱weight straightener 3,0 t︱
          Straightening machine RYD 40 x 500 hydraulic inlet guide Decoiler DY 500 x 3000 with hydraulic expansion, hydraulic coil lifting device elektronic roll feed AESL 500-2,8 can be offered without or with putting into operation in given condition
            material width 500 mm
            coil weight 3,0 t
            material thickness 0,2 - 2,5 mm
            coil internal diameter 470 - 530 mm
            coil external diameter 1400 mm
            no. of straightening rolls 9
            straightening roll diameter 40 mm
            number of inlet and outlet rolls 4
            material cross-cut 1200 mm²
            speed 1,5 - 30 m/min
            dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m
            weight decoiler 1,1 t
            dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m
            weight straightener 3,0 t
            Description :
            Straightening machine RYD 40 x 500
            hydraulic inlet guide
            Decoiler DY 500 x 3000
            with hydraulic expansion, hydraulic coil lifting device
            elektronic roll feed AESL 500-2,8
            can be offered without or with putting into operation in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line AMTEC PBS 24/24


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-729197 · coil line

          AMTEC - PBS 24/24 - - 1994 -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - total power consumption 30 kW︱ - mains voltage 500 V︱ - mains frequency 50 Hz︱
          Technical description : This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks. The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed. The effluence rate of the spray valves for top and bottom side can be adjusted individually. A heating device facilitates the processing with high viscosity lubricants. - Year of Manufacture: December 1994 - Max. Blank length: 1800mm - Max. Blank width: 2500mm - Medium emulsion, oil, grease
            - total power consumption 30 kW
            - mains voltage 500 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks.
            The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed.
            The effluence rate of the spray valves for top and bottom side can be adjusted individually.
            A heating device facilitates the processing with high viscosity lubricants.

            - Year of Manufacture: December 1994
            - Max. Blank length: 1800mm
            - Max. Blank width: 2500mm
            - Medium emulsion, oil, grease




        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 1676 E/RDS  /  2380 FM-FPS


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183063A · coil line

          DREHER - 1676 E/RDS / 2380 FM-FPS - - 1994 - konventionell

          Technical details
          material width 650 mm︱coil weight 3,5 t︱material thickness 0,8 - 3,0 mm︱no. of straightening rolls 7 ︱straightening roll diameter 80 mm︱number of inlet rolls 4 ︱coil internal diameter 460 - 530 mm︱coil external diameter 1400 mm︱weight straightener 1,0 t︱weight decoiler 0,9 t︱dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m︱dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m︱
          Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll coil loop control Ultrasonic
            material width 650 mm
            coil weight 3,5 t
            material thickness 0,8 - 3,0 mm
            no. of straightening rolls 7
            straightening roll diameter 80 mm
            number of inlet rolls 4
            coil internal diameter 460 - 530 mm
            coil external diameter 1400 mm
            weight straightener 1,0 t
            weight decoiler 0,9 t
            dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m
            dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m
            Description :
            Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4
            with infinitely variable drive
            Decoiler DREHER 2380 FM-FPS Modell 891/5
            motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll
            coil loop control Ultrasonic


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line TEAP AMDC150+RM


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15596 · coil line

          TEAP - AMDC150+RM - - 1993 -

          Technical details
          material width 350 mm︱coil weight 2x 1 t︱material thickness 3 mm︱coil internal dia. 480-530 mm︱coil outside dia. 1400 mm︱
            material width 350 mm
            coil weight 2x 1 t
            material thickness 3 mm
            coil internal dia. 480-530 mm
            coil outside dia. 1400 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DIMECO 1676 EV / 2382 FFPS


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133013 · coil line

          DIMECO - 1676 EV / 2382 FFPS - - 1990 - konventionell

          Technical details
          material width coil line 600 mm︱coil weight 2 x 3,5 t︱coil internal diameter 460 - 530 mm︱coil external diameter 1500 mm︱material thickness coil line 0,5 - 3,0 mm︱no. of straightening rolls 7 ︱no. of rolls at in- and outlet 4 ︱roll diameter 80 mm︱feed length 0 - 500 mm︱power requirement 10,0 kW︱weight 10,0 t︱dimensions of the coil line 8,8 x 4,0 x 2,55 m︱
          Straightening machine Dimeco, 1676 EV with inlet table andpre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed kann ohne in Betrieb nehmen oder alternativ mit neuer Steuerung Siemens S 7-1500 F angeboten werden can only be offered without putting into operation - video at seller's site before dismantling available
            material width coil line 600 mm
            coil weight 2 x 3,5 t
            coil internal diameter 460 - 530 mm
            coil external diameter 1500 mm
            material thickness coil line 0,5 - 3,0 mm
            no. of straightening rolls 7
            no. of rolls at in- and outlet 4
            roll diameter 80 mm
            feed length 0 - 500 mm
            power requirement 10,0 kW
            weight 10,0 t
            dimensions of the coil line 8,8 x 4,0 x 2,55 m
            Description :
            Straightening machine Dimeco, 1676 EV
            with inlet table andpre-shaping roll, hydraulic loading bridge
            Double decoiler Dimeco 2382 FFPS
            with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device
            elektronic roll feed Microfeed
            kann ohne in Betrieb nehmen oder alternativ mit neuer Steuerung Siemens S 7-1500 F angeboten werden
            can only be offered without putting into operation - video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line SCHLEICHER


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03639 · coil line

          SCHLEICHER - - - -

          Technical details
          material width 1200 mm︱coil weight 10 t︱material thickness 8 mm︱internal diameter 500 mm︱coil outside dia. 1300 mm︱coil Schleicher ︱straightening device Schleicher ︱feed motor Schleicher ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            material width 1200 mm
            coil weight 10 t
            material thickness 8 mm
            internal diameter 500 mm
            coil outside dia. 1300 mm
            coil Schleicher
            straightening device Schleicher
            feed motor Schleicher


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line SCHARF WESTFALIA


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-739033 · coil line

          SCHARF WESTFALIA - - - -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - clamping surface (left-right) 4000 mm︱ - clamping surface (front-back) 2050 mm︱ - rotation 360 °︱ - - rotation speed 1.3 /min︱ELECTRICAL SPECIFICATIONS . ︱ - mains voltage 380 V︱ - mains frequency 50 Hz︱
          Technical description : Blank Pallet Turnover Device / Blank Handlling (needs retrofit)
            - clamping surface (left-right. 4000 mm
            - clamping surface (front-back. 2050 mm
            - rotation 360 °
            - - rotation speed 1.3 /min
            ELECTRICAL SPECIFICATIONS .
            - mains voltage 380 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            Blank Pallet Turnover Device / Blank Handlling (needs retrofit)




        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SAFAN UNBEKANNT


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1149 · Plate Shear - Hydraulic

          SAFAN - UNBEKANNT - - unbekannt -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱distance between columns / mm︱
            sheet width 3000 mm
            plate thickness 6 mm
            distance between columns / mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6 HH MONO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010991 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 HH MONO - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱total power requirement 11 kW︱weight of the machine ca. 6.300 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine u. Control in German Special equipment: - pneumatic sheet holding device (monoblock)
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            total power requirement 11 kW
            weight of the machine ca. 6.300 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Equipment:
            - CNC electr. / hydraulic swing cut shears
            - CYBELEC CNC touch screen controller, model CybTouch 8
            * Backgauge preselection - X axis
            * Cutting gap adjustment
            * Quantity
            * Cutting length limitation
            * Material preselection, including sheet thickness
            * Cutting line lighting
            - motorized backgauge, travel = 1,000 mm (X axis)
            * on ball screws
            * autom. can be folded up at max. Traverse path, for longer cuts
            - 1x side stop
            - 2x front support arms
            - Ball casters in the front support table
            - hinged finger protection, with safety switch
            - BOSCH / HOERBIGER hydraulic system
            - SIEMENS electrical system
            - light barrier behind the machine (safety device)
            - foot switch
            - CE mark / declaration of conformity
            - User manual: machine u. Control in German

            Special equipment:
            - pneumatic sheet holding device (monoblock)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 2100 x 4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011176 · Plate Shear - Hydraulic

          FARINA - CFM 2100 x 4,0 - - NEU -

          Technical details
          sheet width 2040 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱total power requirement 7,5 kW︱rear stop 750 mm︱weight of the machine ca. 2600 kg︱dimensions 2810 x 2230 x 1360 mm︱
            sheet width 2040 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            total power requirement 7,5 kW
            rear stop 750 mm
            weight of the machine ca. 2600 kg
            dimensions 2810 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10 HH MONO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011046 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 HH MONO - - Neu -

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA HTBS BASIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011089 · Plate Shear - Hydraulic

          FARINA - HTBS BASIC - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 10 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱weight of the machine ca. 10500 kg︱
            sheet width 3060 mm
            plate thickness 10 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            weight of the machine ca. 10500 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x13


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010788 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x13 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 13 mm︱thickness at "Niro-steel" 8 mm︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 2,0° °︱total power requirement 22 kW︱voltage 380 V︱no. of strokes 11 Hub/min︱weight of the machine ca. 12.100 kg︱dimensions of the machine ca. 4000x2240x2235 mm︱
          Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German
            sheet width 3100 mm
            plate thickness 13 mm
            thickness at "Niro-steel" 8 mm
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 2,0° °
            total power requirement 22 kW
            voltage 380 V
            no. of strokes 11 Hub/min
            weight of the machine ca. 12.100 kg
            dimensions of the machine ca. 4000x2240x2235 mm
            Description :
            Accessories / equipment:
            - CYBELEC-CybTouch control panel with digital display for backgauge
            - hydr. Cutting gap adjustment via control
            - 1 side stop
            - 4 front lifting arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Ball rolls in the table
            - motorized back gauge 1.000 mm travel with recirculating ball screws,
               automatically start at the end of the stop
            - Shear knives for stainless steel cuts as standard
            - Photocell behind the machine
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - Operating instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011153 · Plate Shear - Hydraulic

          BAYKAL - HGL 3106 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 11 kW︱machine weight ab. 5460 kg︱dimensions 3930 x 2750 x 1570 mm︱
            sheet width 3060 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 11 kW
            machine weight ab. 5460 kg
            dimensions 3930 x 2750 x 1570 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3108


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011152 · Plate Shear - Hydraulic

          BAYKAL - HGL 3108 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 8 mm︱sheet thickness for stainless steel 5 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 15 kW︱machine weight ab. 6380 kg︱dimensions 3930 x 2890 x 1600 mm︱
            sheet width 3060 mm
            plate thickness 8 mm
            sheet thickness for stainless st. 5 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 15 kW
            machine weight ab. 6380 kg
            dimensions 3930 x 2890 x 1600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010594 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱ 20 ︱total power requirement 11 kW︱weight of the machine ca. 5700 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            20
            total power requirement 11 kW
            weight of the machine ca. 5700 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Accessories / equipment:
            - CYBELEC Cybtouch touch screen controller
            - NC controller for backgauge, gap adjustment, number of pieces,
            cutting length
            - 1 side stop with scale, T-groove and tilting cam
            - 2 front support arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Folding finger guard with limit switch
            - motorized back gauge 1.000 mm travel
            - Ball screws
            - Photocell behind the machine
            - Ball rolls in the table
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - CE mark / Declaration of Conformity
            - Operating manual: Machine and control in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 1360 x 3,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011175 · Plate Shear - Hydraulic

          FARINA - CFM 1360 x 3,0 - - NEU -

          Technical details
          sheet width 1350 mm︱ 3 mm︱sheet thickness for stainless steel 1,5 mm︱rear stop 600 mm︱total power requirement 3 kW︱weight of the machine ca. 1150 kg︱dimensions 2030 x 1940 x 1220 mm︱
            sheet width 1350 mm
            3 mm
            sheet thickness for stainless st. 1,5 mm
            rear stop 600 mm
            total power requirement 3 kW
            weight of the machine ca. 1150 kg
            dimensions 2030 x 1940 x 1220 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010523 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 - - Neu - CYBELEC CybTouch 8

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱control CYBELEC CybTouch 8 ︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            control CYBELEC CybTouch 8
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •