'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          coil line

          Machinelist: coil line


          coil line

          used Sheet metal working / shaeres / bending coil line 1SCHLEICHER/GSW


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-531 · coil line

          1SCHLEICHER/GSW - - - unbekannt -

          Technical details
          material width 300 mm︱coil weight 3 t︱material thickness 2 - 4 mm︱
          CNC roll feed, Make GSW, Type WVE 400/160 - weight 50/80 kg Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW
            material width 300 mm
            coil weight 3 t
            material thickness 2 - 4 mm
            Description :
            CNC roll feed, Make GSW, Type WVE 400/160
            - weight 50/80 kg

            Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160
            - band width 300 mm
            - band thickness 2 – 4 mm
            - cross cut 1200 mm²
            - voltage 220/380 V 50 Hz
            - total power requirement 3,1 kW

            coiler with press roll, Make Schleicher, Type H-3
            - Coil weight 3 t
            - Band width 400 mm
            - voltage 220/380 V 50 Hz
            - total power requirement 3,92 kW



        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line GSW SHR 5000 / VCRL 650


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103046 · coil line

          GSW - SHR 5000 / VCRL 650 - - 2000 - konventionell

          Technical details
          material width 600 mm︱coil weight 5,0 t︱material thickness - 5,0 mm︱coil internal diameter 360 - 660 mm︱coil external diameter 1500 mm︱no. of straightening rolls 9 ︱straightening roll diameter 80 mm︱number of draw-in rolls 2 ︱material cross-cut 1600 mm²︱power requirement kW︱weight of feeeder-straightener 2,5 t︱weight of decoiler 1,5 t︱dimensions feeder-straightener (WxDxH) 1,7 x 1,7 x 2,6 mm︱dimensions decoiler (WxDxH) 1,8 x 2,0 x 2,3 mm︱
          Feeder-straightening machine VCRL 650 (year of manufacture1994 / overhauled 2001) with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, intermittent lifting Decoiler SHR 5000 (year of manufacture 2000) with hydraulic expansion, snubber roll
            material width 600 mm
            coil weight 5,0 t
            material thickness - 5,0 mm
            coil internal diameter 360 - 660 mm
            coil external diameter 1500 mm
            no. of straightening rolls 9
            straightening roll diameter 80 mm
            number of draw-in rolls 2
            material cross-cut 1600 mm²
            weight of feeeder-straightener 2,5 t
            weight of decoiler 1,5 t
            dimensions feeder-straightener (. 1,7 x 1,7 x 2,6 mm
            dimensions decoiler (WxDxH) 1,8 x 2,0 x 2,3 mm
            Description :
            Feeder-straightening machine VCRL 650
            (year of manufacture1994 / overhauled 2001)
            with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, intermittent lifting
            Decoiler SHR 5000 (year of manufacture 2000)
            with hydraulic expansion, snubber roll


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 2352 B-FPS / SC 12-FQ


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083096 · coil line

          DREHER - 2352 B-FPS / SC 12-FQ - - 1997 - Siemens S 5

          Technical details
          material width 300 mm︱coil weight 2 x 1,25 t︱material thickness 0,4 - 1,2 mm︱coil internal diameter 320 - 420 mm︱coil external diameter 1300 mm︱no. of straightening rolls 9 ︱straightening roll diameter 30 mm︱number of draw-in rolls 2 ︱roll diameter 30 mm︱speed 3 - 30 m/min︱feed length 0 - 9999,9 mm︱power requirement 3,0 + 2,5 kW︱weight of decoiler 0,7 t︱dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm︱weight of straightening machine 0,45 t︱dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm︱weight of the feeder 0,4 t︱dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm︱
          Universal straightening machine SC 12-FQ with infinitely variable drive double decoiler 2352 B-FPS WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls
            material width 300 mm
            coil weight 2 x 1,25 t
            material thickness 0,4 - 1,2 mm
            coil internal diameter 320 - 420 mm
            coil external diameter 1300 mm
            no. of straightening rolls 9
            straightening roll diameter 30 mm
            number of draw-in rolls 2
            roll diameter 30 mm
            speed 3 - 30 m/min
            feed length 0 - 9999,9 mm
            power requirement 3,0 + 2,5 kW
            weight of decoiler 0,7 t
            dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm
            weight of straightening machine 0,45 t
            dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm
            weight of the feeder 0,4 t
            dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm
            Description :
            Universal straightening machine SC 12-FQ
            with infinitely variable drive
            double decoiler 2352 B-FPS
            WITHOUT drive, with hydraulic expansion, pneumatic lag brake
            electronic roll feed WAV-RDS-2Z, modell 1082 B
            with AC-Servomotor, pneumatic intermediate lifting of the rolls


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line HENSEL BRMS 4/500/10  /  BSH 3-500  /


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-194014V · coil line

          HENSEL - BRMS 4/500/10 / BSH 3-500 / - - 1996 - konventionell

          Technical details
          material width 500 mm︱coil weight 2,5 t︱material thickness 0,2 - 3,0 mm︱coil internal diameter 480 - 530 mm︱coil external diameter 1300 mm︱material cross-cut 1000 mm²︱no. of straightening rolls 10 ︱straightening roll diameter 80 mm︱number of draw-in rolls 2 ︱roll diameter 120 mm︱Material thickness feeder 0,2 - 5,0 mm︱material cross-cut feeder 1000 mm²︱roll diameter 100 mm︱speed 20 m/min︱power requirement 4,0 + 1,1 kW︱weight of straightening machine 2,3 t︱dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm︱weight of decoiler 0,95 t︱dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm︱weight feeder t︱
          Straightening machine HENSEL BRMS 4/500/10 with infinitely variable drive Decoiler HENSEL BSH 3-500 mith motor for fix speed, auxiliary drive (declutchable), pneumatic snubber roll Electronic roll feed HENSEL EVX 500 with hydraulic intermediate lifting of the rolls Material thickness of feeder approx. 0,2 - 5,0 mm with coil loop control via light guard
            material width 500 mm
            coil weight 2,5 t
            material thickness 0,2 - 3,0 mm
            coil internal diameter 480 - 530 mm
            coil external diameter 1300 mm
            material cross-cut 1000 mm²
            no. of straightening rolls 10
            straightening roll diameter 80 mm
            number of draw-in rolls 2
            roll diameter 120 mm
            Material thickness feeder 0,2 - 5,0 mm
            material cross-cut feeder 1000 mm²
            roll diameter 100 mm
            speed 20 m/min
            power requirement 4,0 + 1,1 kW
            weight of straightening machine 2,3 t
            dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm
            weight of decoiler 0,95 t
            dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm
            Description :
            Straightening machine
            HENSEL BRMS 4/500/10
            with infinitely variable drive
            Decoiler
            HENSEL BSH 3-500
            mith motor for fix speed, auxiliary drive (declutchable), pneumatic snubber roll
            Electronic roll feed
            HENSEL EVX 500
            with hydraulic intermediate lifting of the rolls
            Material thickness of feeder approx. 0,2 - 5,0 mm
            with coil loop control via light guard


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 1676 AV-RA2 / 2370 B


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1740 · coil line

          DREHER - 1676 AV-RA2 / 2370 B - - 1995 -

          Technical details
          material width 200 mm︱coil weight 1,5 t︱material thickness 0,8 - 4,2 mm︱straightening roll diameter 80 mm︱Number of straightening rolls 7 Pcs.︱
          Coil turner 2370 B Load capacity 1.5 ton. Bandwidth 300 mm Coil inner diameter: 400 - 500 mm Arm length per arm: 670 mm Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm Weight: 760 kg. Straightener Dreher 1676 AV-RA2 Material width: 200 mm Material thickness: 08 - 4.2 mm Number of straightening rollers: 7 Number of pull rollers: 4 Straightening rollers diameter: 80 mm Would be down by a running press Documents circuit diagrams, operating instructions etc. available
            material width 200 mm
            coil weight 1,5 t
            material thickness 0,8 - 4,2 mm
            straightening roll diameter 80 mm
            Number of straightening rolls 7 Pcs.
            Description :
            Coil turner 2370 B
            Load capacity 1.5 ton.
            Bandwidth 300 mm
            Coil inner diameter: 400 - 500 mm
            Arm length per arm: 670 mm
            Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm
            Weight: 760 kg.

            Straightener Dreher 1676 AV-RA2
            Material width: 200 mm
            Material thickness: 08 - 4.2 mm
            Number of straightening rollers: 7
            Number of pull rollers: 4
            Straightening rollers diameter: 80 mm

            Would be down by a running press
            Documents circuit diagrams, operating instructions etc. available


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line KOHLER / WEINGARTEN 50.650/9-7500.1 / WEP 65


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233027 · coil line

          KOHLER / WEINGARTEN - 50.650/9-7500.1 / WEP 65 - - 1995 - konventionell

          Technical details
          material width 650 mm︱coil weight 7,5 t︱material thickness 0,6 - 4,0 mm︱coil internal diameter 460 - 530 (630) mm︱coil external diameter 1300 mm︱material cross-cut 1300 mm²︱no. of straightening rolls 9 ︱straightening roll diameter 60 mm︱number of draw-in rolls ︱roll diameter mm︱speed 1 - 30 m/min︱power requirement 30,0 kW︱weight of straightening machine t︱dimensions straightener (WxDxH) mm︱weight of decoiler t︱dimensions decoiler (WxDxH) mm︱weight feeder t︱dimensions feeder (WxDxH) m︱
          Straightening machine KOHLER 50.650/9 with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette Decoiler KOHLER 7500.1 with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table Servo roll feed WEINGARTEN WEP 65 coil loop control via light guard
            material width 650 mm
            coil weight 7,5 t
            material thickness 0,6 - 4,0 mm
            coil internal diameter 460 - 530 (630) mm
            coil external diameter 1300 mm
            material cross-cut 1300 mm²
            no. of straightening rolls 9
            straightening roll diameter 60 mm
            speed 1 - 30 m/min
            power requirement 30,0 kW
            Description :
            Straightening machine KOHLER 50.650/9
            with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette
            Decoiler KOHLER 7500.1
            with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table
            Servo roll feed WEINGARTEN WEP 65
            coil loop control via light guard


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line NORMATIC DY 500 X3000


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163021A · coil line

          NORMATIC - DY 500 X3000 - - 1994 - konventionell

          Technical details
          material width 500 mm︱coil weight 3,0 t︱material thickness 0,2 - 2,5 mm︱coil internal diameter 470 - 530 mm︱coil external diameter 1400 mm︱no. of straightening rolls 9 ︱straightening roll diameter 40 mm︱number of inlet and outlet rolls 4 ︱material cross-cut 1200 mm²︱speed 1,5 - 30 m/min︱Power capacity kW︱dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m︱weight decoiler 1,1 t︱dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m︱weight straightener 3,0 t︱
          Straightening machine RYD 40 x 500 hydraulic inlet guide Decoiler DY 500 x 3000 with hydraulic expansion, hydraulic coil lifting device elektronic roll feed AESL 500-2,8 can be offered without or with putting into operation in given condition
            material width 500 mm
            coil weight 3,0 t
            material thickness 0,2 - 2,5 mm
            coil internal diameter 470 - 530 mm
            coil external diameter 1400 mm
            no. of straightening rolls 9
            straightening roll diameter 40 mm
            number of inlet and outlet rolls 4
            material cross-cut 1200 mm²
            speed 1,5 - 30 m/min
            dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m
            weight decoiler 1,1 t
            dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m
            weight straightener 3,0 t
            Description :
            Straightening machine RYD 40 x 500
            hydraulic inlet guide
            Decoiler DY 500 x 3000
            with hydraulic expansion, hydraulic coil lifting device
            elektronic roll feed AESL 500-2,8
            can be offered without or with putting into operation in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line AMTEC PBS 24/24


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-729197 · coil line

          AMTEC - PBS 24/24 - - 1994 -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - total power consumption 30 kW︱ - mains voltage 500 V︱ - mains frequency 50 Hz︱
          Technical description : This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks. The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed. The effluence rate of the spray valves for top and bottom side can be adjusted individually. A heating device facilitates the processing with high viscosity lubricants. - Year of Manufacture: December 1994 - Max. Blank length: 1800mm - Max. Blank width: 2500mm - Medium emulsion, oil, grease
            - total power consumption 30 kW
            - mains voltage 500 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            This BLANK COATING SYSTEM 'PBS 24/24' serves as a complete surface or partial application of lubricants on rectangular or formed blanks.
            The coating process is being carried out separately for top side or bottom side via a valve row, whereby the blanks travel in between with constant speed.
            The effluence rate of the spray valves for top and bottom side can be adjusted individually.
            A heating device facilitates the processing with high viscosity lubricants.

            - Year of Manufacture: December 1994
            - Max. Blank length: 1800mm
            - Max. Blank width: 2500mm
            - Medium emulsion, oil, grease




        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DREHER 1676 E/RDS  /  2380 FM-FPS


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183063A · coil line

          DREHER - 1676 E/RDS / 2380 FM-FPS - - 1994 - konventionell

          Technical details
          material width 650 mm︱coil weight 3,5 t︱material thickness 0,8 - 3,0 mm︱no. of straightening rolls 7 ︱straightening roll diameter 80 mm︱number of inlet rolls 4 ︱coil internal diameter 460 - 530 mm︱coil external diameter 1400 mm︱weight straightener 1,0 t︱weight decoiler 0,9 t︱dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m︱dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m︱
          Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll coil loop control Ultrasonic
            material width 650 mm
            coil weight 3,5 t
            material thickness 0,8 - 3,0 mm
            no. of straightening rolls 7
            straightening roll diameter 80 mm
            number of inlet rolls 4
            coil internal diameter 460 - 530 mm
            coil external diameter 1400 mm
            weight straightener 1,0 t
            weight decoiler 0,9 t
            dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m
            dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m
            Description :
            Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4
            with infinitely variable drive
            Decoiler DREHER 2380 FM-FPS Modell 891/5
            motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll
            coil loop control Ultrasonic


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line TEAP AMDC150+RM


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15596 · coil line

          TEAP - AMDC150+RM - - 1993 -

          Technical details
          material width 350 mm︱coil weight 2x 1 t︱material thickness 3 mm︱coil internal dia. 480-530 mm︱coil outside dia. 1400 mm︱
            material width 350 mm
            coil weight 2x 1 t
            material thickness 3 mm
            coil internal dia. 480-530 mm
            coil outside dia. 1400 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line DIMECO 1676 EV / 2382 FFPS


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133013 · coil line

          DIMECO - 1676 EV / 2382 FFPS - - 1990 - konventionell

          Technical details
          material width coil line 600 mm︱coil weight 2 x 3,5 t︱coil internal diameter 460 - 530 mm︱coil external diameter 1500 mm︱material thickness coil line 0,5 - 3,0 mm︱no. of straightening rolls 7 ︱no. of rolls at in- and outlet 4 ︱roll diameter 80 mm︱feed length 0 - 500 mm︱power requirement 10,0 kW︱weight 10,0 t︱dimensions of the coil line 8,8 x 4,0 x 2,55 m︱
          Straightening machine Dimeco, 1676 EV with inlet table andpre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed kann ohne in Betrieb nehmen oder alternativ mit neuer Steuerung Siemens S 7-1500 F angeboten werden can only be offered without putting into operation - video at seller's site before dismantling available
            material width coil line 600 mm
            coil weight 2 x 3,5 t
            coil internal diameter 460 - 530 mm
            coil external diameter 1500 mm
            material thickness coil line 0,5 - 3,0 mm
            no. of straightening rolls 7
            no. of rolls at in- and outlet 4
            roll diameter 80 mm
            feed length 0 - 500 mm
            power requirement 10,0 kW
            weight 10,0 t
            dimensions of the coil line 8,8 x 4,0 x 2,55 m
            Description :
            Straightening machine Dimeco, 1676 EV
            with inlet table andpre-shaping roll, hydraulic loading bridge
            Double decoiler Dimeco 2382 FFPS
            with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device
            elektronic roll feed Microfeed
            kann ohne in Betrieb nehmen oder alternativ mit neuer Steuerung Siemens S 7-1500 F angeboten werden
            can only be offered without putting into operation - video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line SCHLEICHER


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03639 · coil line

          SCHLEICHER - - - -

          Technical details
          material width 1200 mm︱coil weight 10 t︱material thickness 8 mm︱internal diameter 500 mm︱coil outside dia. 1300 mm︱coil Schleicher ︱straightening device Schleicher ︱feed motor Schleicher ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            material width 1200 mm
            coil weight 10 t
            material thickness 8 mm
            internal diameter 500 mm
            coil outside dia. 1300 mm
            coil Schleicher
            straightening device Schleicher
            feed motor Schleicher


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending coil line SCHARF WESTFALIA


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-739033 · coil line

          SCHARF WESTFALIA - - - -

          Technical details
          material width mm︱coil weight t︱material thickness mm︱----------------------------------- ︱ - clamping surface (left-right) 4000 mm︱ - clamping surface (front-back) 2050 mm︱ - rotation 360 °︱ - - rotation speed 1.3 /min︱ELECTRICAL SPECIFICATIONS . ︱ - mains voltage 380 V︱ - mains frequency 50 Hz︱
          Technical description : Blank Pallet Turnover Device / Blank Handlling (needs retrofit)
            - clamping surface (left-right. 4000 mm
            - clamping surface (front-back. 2050 mm
            - rotation 360 °
            - - rotation speed 1.3 /min
            ELECTRICAL SPECIFICATIONS .
            - mains voltage 380 V
            - mains frequency 50 Hz
            Description :
            Technical description :

            Blank Pallet Turnover Device / Blank Handlling (needs retrofit)




        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Bending Machine - 3 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls HESSE by ISITAN R 1050 x 75


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-226 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - R 1050 x 75 - - 2021 -

          Technical details
          gebraucht20219501Türkei2100 €︱ 11050 mm︱ 2 mm︱ 75 mm︱ 1930 mm︱ 700 mm︱ 1160 mm︱ 300 kg︱
          MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH
            gebraucht
            2021
            9501
            Türkei
            2100 €
            1
            1050 mm
            2 mm
            75 mm
            1930 mm
            700 mm
            1160 mm
            300 kg
            Description :
            MINT CONDITION
            3 rolls
            asymmetric rolls - prebending
            longitudinal grooves in lower and lateral roll
            Infeed of the lower roller by a central lever - with gear reduction
            machine stand
            user manual in GERMAN orENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls AKYAPAK 1030 x 70


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-19334 · Plate Bending Machine - 3 Rolls

          AKYAPAK - 1030 x 70 - - 1998 -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1050 mm

          metal sheet thickness: 1,5 mm

          upper roller-Ø: 70 mm

          below roller-Ø: 70 mm
          Njw93ychg

          weight: 320 kg

          space needed: 700 x 1300 x 1100 mm
            Description :
            working width: 1050 mm



            metal sheet thickness: 1,5 mm



            upper roller-Ø: 70 mm



            below roller-Ø: 70 mm

            Njw93ychg



            weight: 320 kg



            space needed: 700 x 1300 x 1100 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls DURMAZLAR KSM 56


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-18062 · Plate Bending Machine - 3 Rolls

          DURMAZLAR - KSM 56 - - 1996 -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1030 mm

          metal sheet thickness: 1 mm

          upper roller-Ø: 60 mm

          below roller-Ø: 60 mm
          Zxy8p9m

          weight: 170 kg

          space needed: 560 x 1570 x 1080 mm
            Description :
            working width: 1030 mm



            metal sheet thickness: 1 mm



            upper roller-Ø: 60 mm



            below roller-Ø: 60 mm

            Zxy8p9m



            weight: 170 kg



            space needed: 560 x 1570 x 1080 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls DURMAZLAR KSM 56


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-18062 · Plate Bending Machine - 3 Rolls

          DURMAZLAR - KSM 56 - - 1996 -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1030 mm
          Iw8bipcy0
          metal sheet thickness: 1 mm
          upper roller-Ø: 60 mm
          below roller-Ø: 60 mm
          weight: 170 kg
          space needed: 560 x 1570 x 1080 mm
            Description :
            working width: 1030 mm

            Iw8bipcy0

            metal sheet thickness: 1 mm

            upper roller-Ø: 60 mm

            below roller-Ø: 60 mm

            weight: 170 kg

            space needed: 560 x 1570 x 1080 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls SCHAEFER SRMVQ


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H06661 · Plate Bending Machine - 3 Rolls

          SCHAEFER - SRMVQ - - 1975 -

          Technical details
          sheet width 3000 mm︱plate thickness 40 mm︱pre-bending 30 ︱total power requirement kW︱weight of the machine ca. 45 t︱dimensions of the machine ca. 8,4 x 2,6 x 3,7 m︱
          Machine in good condition. PREBENDING DOUBLE . Maximum bending length 3.000 mm . Bending capacity 40 mm . Prebending capacity 30 mm . Top roll diameter 590 mm . Bending rolls diameter 490 mm . Main motor 45 kW . Bending motor 30 kW . Digital readout in all axis . Approximate weight 45 t . Approximate dimenssion.: . Length: 8.400 mm . Width: 2.600 mm . Height: 3.700 mm . Trench height: 1.780 mm
            sheet width 3000 mm
            plate thickness 40 mm
            pre-bending 30
            weight of the machine ca. 45 t
            dimensions of the machine ca. 8,4 x 2,6 x 3,7 m
            Description :
            Machine in good condition.

            PREBENDING DOUBLE

            . Maximum bending length 3.000 mm
            . Bending capacity 40 mm
            . Prebending capacity 30 mm
            . Top roll diameter 590 mm
            . Bending rolls diameter 490 mm
            . Main motor 45 kW
            . Bending motor 30 kW
            . Digital readout in all axis
            . Approximate weight 45 t
            . Approximate dimenssion.:
            . Length: 8.400 mm
            . Width: 2.600 mm
            . Height: 3.700 mm
            . Trench height: 1.780 mm


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls unbekannt unbekannt


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26672 · Plate Bending Machine - 3 Rolls

          unbekannt - unbekannt - - -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1040 mm
          Lp20uvs
          metal sheet thickness: 1,25 mm
          upper roller-Ø: 56 mm
          below roller-Ø: 56 mm
          weight: 190 kg
          space needed: 1450 x 460 x 1030 mm
            Description :
            working width: 1040 mm

            Lp20uvs

            metal sheet thickness: 1,25 mm

            upper roller-Ø: 56 mm

            below roller-Ø: 56 mm

            weight: 190 kg

            space needed: 1450 x 460 x 1030 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls unbekannt unbekannt


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26395 · Plate Bending Machine - 3 Rolls

          unbekannt - unbekannt - - -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1020 mm
          32qxc3xgp
          metal sheet thickness: 1 mm
          upper roller-Ø: 55 mm
          below roller-Ø: 55 mm
          space needed: 1370 x 570 x 1100 mm
            Description :
            working width: 1020 mm

            32qxc3xgp

            metal sheet thickness: 1 mm

            upper roller-Ø: 55 mm

            below roller-Ø: 55 mm

            space needed: 1370 x 570 x 1100 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls HESSE by ISITAN RM 1550 x 90


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-213 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - RM 1550 x 90 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei7200 €︱ 149.04 €︱ 1550 mm︱ 2 mm︱ 90 mm︱ 6 m/min︱ 1.5 kW︱ 2130 mm︱ 700 mm︱ 1200 mm︱ 545 kg︱
          3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,-
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            7200 €
            149.04 €
            1550 mm
            2 mm
            90 mm
            6 m/min
            1.5 kW
            2130 mm
            700 mm
            1200 mm
            545 kg
            Description :
            3 rolls
            asymmetric rolls - prebending
            2 rolls driven by brakemotor
            lateral roll adjustable by handwheel
            longitudinal grooves in lower and lateral roll
            tiltable upper roll
            right / left rotation with double foot switch
            conical rolling device
            user manual in GERMAN or ENGLISH

            OPTIONS:
            powered back roll EUR 1.000,-
            digital readout EUR 1.100,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls HESSE by ISITAN RM 1270 x 90


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-215 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - RM 1270 x 90 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei7000 €︱ 144.9 €︱ 1270 mm︱ 2.5 mm︱ 90 mm︱ 6 m/min︱ 1.1 kW︱ 1850 mm︱ 700 mm︱ 1200 mm︱ 520 kg︱
          3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            7000 €
            144.9 €
            1270 mm
            2.5 mm
            90 mm
            6 m/min
            1.1 kW
            1850 mm
            700 mm
            1200 mm
            520 kg
            Description :
            3 rolls
            asymmetric rolls - prebending
            2 rolls driven by brakemotor
            lateral roll adjustable by handwheel
            longitudinal grooves in lower and lateral roll
            tiltable upper roll
            right / left rotation with double foot switch
            conical rolling device
            user manual in GERMAN or ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls HESSE by ISITAN RM 1050 x 90


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-217 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - RM 1050 x 90 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei6800 €︱ 140.76 €︱ 1050 mm︱ 3 mm︱ 90 mm︱ 6 m/min︱ 1.1 kW︱ 1630 mm︱ 700 mm︱ 1200 mm︱ 480 kg︱
          3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            6800 €
            140.76 €
            1050 mm
            3 mm
            90 mm
            6 m/min
            1.1 kW
            1630 mm
            700 mm
            1200 mm
            480 kg
            Description :
            3 rolls
            asymmetric rolls - prebending
            2 rolls driven by brakemotor
            lateral roll adjustable by handwheel
            longitudinal grooves in lower and lateral roll
            tiltable upper roll
            right / left rotation with double foot switch
            conical rolling device
            user manual in GERMAN


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls HESSE by ISITAN R 1270 x 68


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-224 · Plate Bending Machine - 3 Rolls

          HESSE by ISITAN - R 1270 x 68 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsTürkei3100 €︱ 1270 mm︱ 1.2 mm︱ 68 mm︱ 1.5 kW︱ 1610 mm︱ 700 mm︱ 1160 mm︱ 385 kg︱
          3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            3100 €
            1270 mm
            1.2 mm
            68 mm
            1.5 kW
            1610 mm
            700 mm
            1160 mm
            385 kg
            Description :
            3 Walzen
            asymmetric rolls - prebending
            longitudinal grooves in lower and lateral roll
            Infeed of the lower roller by a central lever - with gear reduction
            machine stand
            user manual in GERMAN orENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •