'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          lubricator for band material

          Machinelist: lubricator for band material


          lubricator for band material

          used Sheet metal working / shaeres / bending lubricator for band material ECKARDT DOS 10 HUB


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-190004V · lubricator for band material

          ECKARDT - DOS 10 HUB - - ? -

          Technical details
          material width mm︱material thickness mm︱material cross-cut mm²︱


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending lubricator for band material ECKARDT DOS 10 H - Logo


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-190005V · lubricator for band material

          ECKARDT - DOS 10 H - Logo - - ? -

          Technical details
          material width mm︱material thickness mm︱material cross-cut mm²︱


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending lubricator for band material RAZIOL RB PF 600


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-160012V · lubricator for band material

          RAZIOL - RB PF 600 - - ? -

          Technical details
          material width 600 mm︱material thickness mm︱material cross-cut mm²︱
            material width 600 mm


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SAFAN UNBEKANNT


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1149 · Plate Shear - Hydraulic

          SAFAN - UNBEKANNT - - unbekannt -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱distance between columns / mm︱
            sheet width 3000 mm
            plate thickness 6 mm
            distance between columns / mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6 HH MONO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010991 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 HH MONO - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱total power requirement 11 kW︱weight of the machine ca. 6.300 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine u. Control in German Special equipment: - pneumatic sheet holding device (monoblock)
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            total power requirement 11 kW
            weight of the machine ca. 6.300 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Equipment:
            - CNC electr. / hydraulic swing cut shears
            - CYBELEC CNC touch screen controller, model CybTouch 8
            * Backgauge preselection - X axis
            * Cutting gap adjustment
            * Quantity
            * Cutting length limitation
            * Material preselection, including sheet thickness
            * Cutting line lighting
            - motorized backgauge, travel = 1,000 mm (X axis)
            * on ball screws
            * autom. can be folded up at max. Traverse path, for longer cuts
            - 1x side stop
            - 2x front support arms
            - Ball casters in the front support table
            - hinged finger protection, with safety switch
            - BOSCH / HOERBIGER hydraulic system
            - SIEMENS electrical system
            - light barrier behind the machine (safety device)
            - foot switch
            - CE mark / declaration of conformity
            - User manual: machine u. Control in German

            Special equipment:
            - pneumatic sheet holding device (monoblock)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 2100 x 4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011176 · Plate Shear - Hydraulic

          FARINA - CFM 2100 x 4,0 - - NEU -

          Technical details
          sheet width 2040 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱total power requirement 7,5 kW︱rear stop 750 mm︱weight of the machine ca. 2600 kg︱dimensions 2810 x 2230 x 1360 mm︱
            sheet width 2040 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            total power requirement 7,5 kW
            rear stop 750 mm
            weight of the machine ca. 2600 kg
            dimensions 2810 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10 HH MONO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011046 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 HH MONO - - Neu -

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA HTBS BASIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011089 · Plate Shear - Hydraulic

          FARINA - HTBS BASIC - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 10 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱weight of the machine ca. 10500 kg︱
            sheet width 3060 mm
            plate thickness 10 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            weight of the machine ca. 10500 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x13


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010788 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x13 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 13 mm︱thickness at "Niro-steel" 8 mm︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 2,0° °︱total power requirement 22 kW︱voltage 380 V︱no. of strokes 11 Hub/min︱weight of the machine ca. 12.100 kg︱dimensions of the machine ca. 4000x2240x2235 mm︱
          Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German
            sheet width 3100 mm
            plate thickness 13 mm
            thickness at "Niro-steel" 8 mm
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 2,0° °
            total power requirement 22 kW
            voltage 380 V
            no. of strokes 11 Hub/min
            weight of the machine ca. 12.100 kg
            dimensions of the machine ca. 4000x2240x2235 mm
            Description :
            Accessories / equipment:
            - CYBELEC-CybTouch control panel with digital display for backgauge
            - hydr. Cutting gap adjustment via control
            - 1 side stop
            - 4 front lifting arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Ball rolls in the table
            - motorized back gauge 1.000 mm travel with recirculating ball screws,
               automatically start at the end of the stop
            - Shear knives for stainless steel cuts as standard
            - Photocell behind the machine
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - Operating instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011153 · Plate Shear - Hydraulic

          BAYKAL - HGL 3106 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 11 kW︱machine weight ab. 5460 kg︱dimensions 3930 x 2750 x 1570 mm︱
            sheet width 3060 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 11 kW
            machine weight ab. 5460 kg
            dimensions 3930 x 2750 x 1570 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 3108


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011152 · Plate Shear - Hydraulic

          BAYKAL - HGL 3108 - - NEU -

          Technical details
          sheet width 3060 mm︱plate thickness 8 mm︱sheet thickness for stainless steel 5 mm︱System pressure 200 kg/cm2︱down holder 17 Stück︱engine output 15 kW︱machine weight ab. 6380 kg︱dimensions 3930 x 2890 x 1600 mm︱
            sheet width 3060 mm
            plate thickness 8 mm
            sheet thickness for stainless st. 5 mm
            System pressure 200 kg/cm2
            down holder 17 Stück
            engine output 15 kW
            machine weight ab. 6380 kg
            dimensions 3930 x 2890 x 1600 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGS 3100x6


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010594 · Plate Shear - Hydraulic

          ERMAK - CNC HGS 3100x6 - - Neu - CYBELEC CybTouch

          Technical details
          sheet width 3100 mm︱plate thickness 6 mm︱voltage 380 V︱control CYBELEC CybTouch ︱down holder 14 Stück︱cutting angle 1,2 °︱ 20 ︱total power requirement 11 kW︱weight of the machine ca. 5700 kg︱dimensions of the machine ca. 4000x2100x1640 mm︱
          Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German
            sheet width 3100 mm
            plate thickness 6 mm
            voltage 380 V
            control CYBELEC CybTouch
            down holder 14 Stück
            cutting angle 1,2 °
            20
            total power requirement 11 kW
            weight of the machine ca. 5700 kg
            dimensions of the machine ca. 4000x2100x1640 mm
            Description :
            Accessories / equipment:
            - CYBELEC Cybtouch touch screen controller
            - NC controller for backgauge, gap adjustment, number of pieces,
            cutting length
            - 1 side stop with scale, T-groove and tilting cam
            - 2 front support arms
            - cut line lighting
            - Cutting gap adjustment
            - Cutting length limit
            - Folding finger guard with limit switch
            - motorized back gauge 1.000 mm travel
            - Ball screws
            - Photocell behind the machine
            - Ball rolls in the table
            - SIEMENS electrical system
            - BOSCH / HOERBIGER hydraulic system
            - Footswitch
            - CE mark / Declaration of Conformity
            - Operating manual: Machine and control in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFM 1360 x 3,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011175 · Plate Shear - Hydraulic

          FARINA - CFM 1360 x 3,0 - - NEU -

          Technical details
          sheet width 1350 mm︱ 3 mm︱sheet thickness for stainless steel 1,5 mm︱rear stop 600 mm︱total power requirement 3 kW︱weight of the machine ca. 1150 kg︱dimensions 2030 x 1940 x 1220 mm︱
            sheet width 1350 mm
            3 mm
            sheet thickness for stainless st. 1,5 mm
            rear stop 600 mm
            total power requirement 3 kW
            weight of the machine ca. 1150 kg
            dimensions 2030 x 1940 x 1220 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA BTS 3006


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011177 · Plate Shear - Hydraulic

          FARINA - BTS 3006 - - NEU -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱back stop - adjustable 1000 mm︱cutting angle 1,5 °︱0 17 St.︱total power requirement 11 kW︱quantity of oil 180 l︱weight of the machine ca. 5950 kg︱
            sheet width 3050 mm
            plate thickness 6 mm
            back stop - adjustable 1000 mm
            cutting angle 1,5 °
            0 17 St.
            total power requirement 11 kW
            quantity of oil 180 l
            weight of the machine ca. 5950 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ERMAK CNC HGD 3100x10


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4010523 · Plate Shear - Hydraulic

          ERMAK - CNC HGD 3100x10 - - Neu - CYBELEC CybTouch 8

          Technical details
          sheet width 3100 mm︱plate thickness 10 mm︱cutting angle 2 °︱down holder 14 Stück︱no. of strokes 13 Hub/min︱throat 350 mm︱oil volume 260 l︱control CYBELEC CybTouch 8 ︱total power requirement 22 kW︱weight of the machine ca. 10.550 kg︱dimensions of the machine ca. 4000x2250x2050 mm︱
          Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German
            sheet width 3100 mm
            plate thickness 10 mm
            cutting angle 2 °
            down holder 14 Stück
            no. of strokes 13 Hub/min
            throat 350 mm
            oil volume 260 l
            control CYBELEC CybTouch 8
            total power requirement 22 kW
            weight of the machine ca. 10.550 kg
            dimensions of the machine ca. 4000x2250x2050 mm
            Description :
            Domestic equipments:
            - Hydraulic swing cut sheet metal shears
            - Touch screen controller with digital display for backgauge
            - automatic kerf adjustment via the control
            - Backgauge control 1000 mm travel with recirculating ball screws
            - Vibration cutting machine with kerf adjustment
            - 2 support arms
            - 1 side stop
            - Photocell behind the machine
            - Cutting length limit
            - cut line lighting
            - Chrome steel knife
            - Ball rolls in the table
            - hinged finger guard with limit switch
            - Footswitch
            - CE mark / Declaration of Conformity
            - Bed instructions in German


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2606


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011154 · Plate Shear - Hydraulic

          BAYKAL - HGL 2606 - - NEU -

          Technical details
          sheet width 2560 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 15 Stück︱engine output 11 kW︱machine weight ab. 4670 kg︱dimensions 3350 x 2800 x 1550 mm︱
            sheet width 2560 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 15 Stück
            engine output 11 kW
            machine weight ab. 4670 kg
            dimensions 3350 x 2800 x 1550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 2106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011155 · Plate Shear - Hydraulic

          BAYKAL - HGL 2106 - - NEU -

          Technical details
          sheet width 2060 mm︱plate thickness 6 mm︱sheet thickness for stainless steel 4 mm︱System pressure 200 kg/cm2︱down holder 13 Stück︱engine output 11 kW︱machine weight ab. 3850 kg︱dimensions 2850 x 2800 x 1550 mm︱
            sheet width 2060 mm
            plate thickness 6 mm
            sheet thickness for stainless st. 4 mm
            System pressure 200 kg/cm2
            down holder 13 Stück
            engine output 11 kW
            machine weight ab. 3850 kg
            dimensions 2850 x 2800 x 1550 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL HGL 4106


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011156 · Plate Shear - Hydraulic

          BAYKAL - HGL 4106 - - NEU -

          Technical details
          sheet width 4060 mm︱plate thickness 6 mm︱System pressure 200 kg/cm2︱down holder 23 Stück︱engine output 11 kW︱machine weight ab. 9400 kg︱dimensions 4940 x 2750 x 1560 mm︱
            sheet width 4060 mm
            plate thickness 6 mm
            System pressure 200 kg/cm2
            down holder 23 Stück
            engine output 11 kW
            machine weight ab. 9400 kg
            dimensions 4940 x 2750 x 1560 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic FARINA CFMT 2560 x 4,0


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011174 · Plate Shear - Hydraulic

          FARINA - CFMT 2560 x 4,0 - - NEU -

          Technical details
          sheet width 2550 mm︱ 4 mm︱sheet thickness for stainless steel 2 mm︱rear stop 750 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3050 kg︱dimensions 3300 x 2230 x 1360 mm︱
            sheet width 2550 mm
            4 mm
            sheet thickness for stainless st. 2 mm
            rear stop 750 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3050 kg
            dimensions 3300 x 2230 x 1360 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BAYKAL MGH 4110


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011184 · Plate Shear - Hydraulic

          BAYKAL - MGH 4110 - - NEU -

          Technical details
          sheet width 4100 mm︱plate thickness 10 mm︱cutting angle 2 °︱ 10 ︱rear stop 5 - 1000 mm︱hydr. holding down 23 ︱oil volume 170 l︱total power requirement 22 kW︱machine weight ab. 13.000 kg︱dimensions 4900 x 2800 x 1900 mm︱
            sheet width 4100 mm
            plate thickness 10 mm
            cutting angle 2 °
            10
            rear stop 5 - 1000 mm
            hydr. holding down 23
            oil volume 170 l
            total power requirement 22 kW
            machine weight ab. 13.000 kg
            dimensions 4900 x 2800 x 1900 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic RAS 85.30


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94147 · Plate Shear - Hydraulic

          RAS - 85.30 - - ca. 1988 -

          Technical details
          sheet width 3100 mm︱plate thickness 4,00 mm︱distance between columns mm︱total power requirement 7,50 kW︱weight of the machine ca. 4,20 t︱dimensions of the machine ca. m︱
          - CNC controlled back gauge 10 – 1000mm - central cutting gap adjustment - Pneumatic sheet metal support - Angle stop 2500 mm - 3 support arms
            sheet width 3100 mm
            plate thickness 4,00 mm
            total power requirement 7,50 kW
            weight of the machine ca. 4,20 t
            Description :
            - CNC controlled back gauge 10 – 1000mm
            - central cutting gap adjustment
            - Pneumatic sheet metal support
            - Angle stop 2500 mm
            - 3 support arms


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STEINER HTS 30-16 RA


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01256 · Plate Shear - Hydraulic

          STEINER - HTS 30-16 RA - - ca. 1978 -

          Technical details
          sheet width 3050 mm︱plate thickness 16 mm︱distance between columns - mm︱back stop - adjustable 1000 mm︱total power requirement kW︱weight of the machine ca. 15 t︱
          Acc.: electr. back gauge with DRO, table extensions
            sheet width 3050 mm
            plate thickness 16 mm
            distance between columns - mm
            back stop - adjustable 1000 mm
            weight of the machine ca. 15 t
            Description :
            Acc.: electr. back gauge with DRO, table extensions


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic METALLKRAFT HTBS-T 3100-60


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94158 · Plate Shear - Hydraulic

          METALLKRAFT - HTBS-T 3100-60 - - 2017 - D-Touch 7

          Technical details
          sheet width 3100 mm︱plate thickness 6,00 mm︱thickness at "Niro-steel" 4,00 mm︱cutting angle 2,0 °︱no. of strokes 15 Hub/min︱back stop - adjustable max. 1000 mm︱down holder 14 Stück︱work height max. 865 mm︱Column width 3515 mm︱throat 50.0 mm︱Control D-Touch 7 ︱oil volume 200 l︱engine output 15.0 kW︱voltage 400 V︱weight 7.650 kg︱range L-W-H 4110 x 2200 x 2100 mm︱
          ** from a maintenance workshop (vehicle construction) ** maintained condition (!!) ** New price ~ 41.000 euros ** Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - Operation manual
            sheet width 3100 mm
            plate thickness 6,00 mm
            thickness at "Niro-steel" 4,00 mm
            cutting angle 2,0 °
            no. of strokes 15 Hub/min
            back stop - adjustable max. 1000 mm
            down holder 14 Stück
            work height max. 865 mm
            Column width 3515 mm
            throat 50.0 mm
            Control D-Touch 7
            oil volume 200 l
            engine output 15.0 kW
            voltage 400 V
            weight 7.650 kg
            range L-W-H 4110 x 2200 x 2100 mm
            Description :
            ** from a maintenance workshop (vehicle construction)
            ** maintained condition (!!)
            ** New price ~ 41.000 euros
            ** Special price on request

            Furnishing:
            - robust electro-hydraulic sheet metal shears
            - CNC control unit D-Touch 7 control ("touchscreen")
            * Anti-reflective, robust 7" color touch screen control panel
            * easy positioning to the desired size
            * Positioning accuracy 0.1 mm
            * unlimited material definition in the material library
            * Intuitive menu navigation
            * Separate display for actual and target value
            * Clearance function of the back gauge
            * Cutting length control via adjustable stroke length
            * Cutting counter
            * Automatic stop of the machine when the programmed cuts are reached
            - CNC electric motor adjustable back gauge
            * Travel distance max. 1,000 mm
            * Backgauge adjustment via ball screws and linear guides
            - constant, low cutting angle for optimal cutting results
            - heavy steel construction in welded construction
            - Ergonomically positioned and clear control panel
            - Hold-down device arranged close to the cutting edge
            - split, fold-up finger protection 1000 mm
            - Self-regulating hold-down pressure
            - manual cutting gap adjustment via adjustment lever
            * with central adjustment lever on the right side of the stand
            - Light barrier for the backgauge area
            - 1x side stop .. L = 1500 mm
            - 2x support arms.. L = 1000 mm each
            - wide sheet metal supports with ball rollers
            - mobile foot switch with emergency stop function
            - high-quality and regrindable knives
            - Hydraulic components MANNESMANN REXROTH or BOSCH
            - Electrics SIEMENS or TELEMECANQUE
            - Operation manual




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic DURMA / METALLKRAFT HTBS-T 3100-60


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325322 · Plate Shear - Hydraulic

          DURMA / METALLKRAFT - HTBS-T 3100-60 - - 2017 - D-Touch 7

          Technical details
          sheet width 3100 mm︱plate thickness 6.0 mm︱thickness at "Niro-steel" 4.0 mm︱cutting angle 2,0 °︱no. of strokes 15 Hub/min︱back stop - adjustable max. 1000 mm︱down holder 14 Stück︱work height max. 865 mm︱Column width 3515 mm︱throat 50.0 mm︱Control D-Touch 7 ︱oil volume 200 l︱engine output 15.0 kW︱voltage 400 V︱weight 7.650 kg︱range L-W-H 4110 x 2200 x 2100 mm︱
          ** from a maintenance workshop (vehicle construction) ** maintained condition (!!) ** New price ~ 41.000 euros ** Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control ("touchscreen") * Anti-reflective, robust 7" color touch screen control panel * easy positioning to the desired size * Positioning accuracy 0.1 mm * unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target value * Clearance function of the back gauge * Cutting length control via adjustable stroke length * Cutting counter * Automatic stop of the machine when the programmed cuts are reached - CNC electric motor adjustable back gauge * Travel distance max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - constant, low cutting angle for optimal cutting results - heavy steel construction in welded construction - Ergonomically positioned and clear control panel - Hold-down device arranged close to the cutting edge - split, fold-up finger protection 1000 mm - Self-regulating hold-down pressure - manual cutting gap adjustment via adjustment lever * with central adjustment lever on the right side of the stand - Light barrier for the backgauge area - 1x side stop .. L = 1500 mm - 2x support arms.. L = 1000 mm each - wide sheet metal supports with ball rollers - mobile foot switch with emergency stop function - high-quality and regrindable knives - Hydraulic components MANNESMANN REXROTH or BOSCH - Electrics SIEMENS or TELEMECANQUE - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325322
            sheet width 3100 mm
            plate thickness 6.0 mm
            thickness at "Niro-steel" 4.0 mm
            cutting angle 2,0 °
            no. of strokes 15 Hub/min
            back stop - adjustable max. 1000 mm
            down holder 14 Stück
            work height max. 865 mm
            Column width 3515 mm
            throat 50.0 mm
            Control D-Touch 7
            oil volume 200 l
            engine output 15.0 kW
            voltage 400 V
            weight 7.650 kg
            range L-W-H 4110 x 2200 x 2100 mm
            Description :
            ** from a maintenance workshop (vehicle construction)
            ** maintained condition (!!)
            ** New price ~ 41.000 euros
            ** Special price on request

            Furnishing:
            - robust electro-hydraulic sheet metal shears
            - CNC control unit D-Touch 7 control ("touchscreen")
            * Anti-reflective, robust 7" color touch screen control panel
            * easy positioning to the desired size
            * Positioning accuracy 0.1 mm
            * unlimited material definition in the material library
            * Intuitive menu navigation
            * Separate display for actual and target value
            * Clearance function of the back gauge
            * Cutting length control via adjustable stroke length
            * Cutting counter
            * Automatic stop of the machine when the programmed cuts are reached
            - CNC electric motor adjustable back gauge
            * Travel distance max. 1,000 mm
            * Backgauge adjustment via ball screws and linear guides
            - constant, low cutting angle for optimal cutting results
            - heavy steel construction in welded construction
            - Ergonomically positioned and clear control panel
            - Hold-down device arranged close to the cutting edge
            - split, fold-up finger protection 1000 mm
            - Self-regulating hold-down pressure
            - manual cutting gap adjustment via adjustment lever
            * with central adjustment lever on the right side of the stand
            - Light barrier for the backgauge area
            - 1x side stop .. L = 1500 mm
            - 2x support arms.. L = 1000 mm each
            - wide sheet metal supports with ball rollers
            - mobile foot switch with emergency stop function
            - high-quality and regrindable knives
            - Hydraulic components MANNESMANN REXROTH or BOSCH
            - Electrics SIEMENS or TELEMECANQUE
            - Operation manual

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325322


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          TOP Manufacturer:

          ECKARDT - RAZIOL -