Grinding - Brushing line
Machinelist: Grinding / Brushing line
Grinding / Brushing line
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-12345 · Grinding / Brushing line
SUHNER - Rotofera DKM + Schleiftisch - - -
Technical details
In-house construction of a universal grinding station consisting of a flexible shaft from Suhner with various attachments, a separate belt sanding unit for sanding edges with the same sanding direction (lying and standing - see photos 4+5) and the large sanding table made of aluminum profiles. This table is equipped with a manually movable and height-adjustable side stand that runs in a guide over the entire length. There is a horizontal support bar attached to it, to which the sanding brush is attached and which can be moved manually from front to back. The recording bar can also be tilted if necessary. With this system, larger areas with the same appearance can be sanded precisely without any effort. Here, stainless steel fronts, table tops, laboratory tables, etc. were provided with the typical surface brushing pattern. This system was used in a well-kept small business to produce special stainless steel parts for kitchens, laboratories and clinics and was only operated by the owner. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m.
Datasheet
Request / Contact
Plate Shear - Mechanical
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-08037 · Plate Shear - Mechanical
KAPEMA - SMP 20-20 - - Fabrikneu / new -
Technical details
The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-08408 · Plate Shear - Mechanical
KAPEMA - SMP 12-30 - - Fabrikneu / new -
Technical details
The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensions 600 mm. • Right-angled stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • rear photocell. Pre-freight to our stock + packaging 270, -. Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-08417 · Plate Shear - Mechanical
KAPEMA - SMP 20-30 - - Fabrikneu / new -
Technical details
The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-01210 · Plate Shear - Mechanical
RFR - MS/24 - - ca. 1960 -
Technical details
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-22062 · Plate Shear - Mechanical
RAS - 53.60 - - 380/6 -
Technical details
Datasheet
Request / Contact
- SKM Industriemaschinen
- Röntgenstr. 3
- 89264 Weißenhorn
- Deutschland
-
+49 (0) 7309 954 986 0
+49 (0) 7309 954 986 1 -
info@skm-maschinen.de
www.skm-maschinen.de
#2032-1144 · Plate Shear - Mechanical
OSTAS - RGM 1550 x 3 - - 2019 -
Technical details
Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30' Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-3320042 · Plate Shear - Mechanical
METALLKRAFT - FTBS 1050-10 - - 2017 -
Technical details
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94086 · Plate Shear - Mechanical
DURMA - MS 2504 - - 2012 -
Technical details
** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9325259 · Plate Shear - Mechanical
DURMA - MS 2504 - - 2012 -
Technical details
** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife
Datasheet
Request / Contact
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9325336 · Plate Shear - Mechanical
HM - NWKS 2000/3 - - 2010 - DIGI
Technical details
** Machine from a maintenance workshop ** maintained condition (!!) Furnishing: - robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.5 KW) - electro-motorized backgauge, including digital control unit * Adjustment range max. 1.000 mm * Input of target / actual value possible - manual cutting gap adjustment, adjustable from the front - 1x table side stop - Ball rollers in the support table - 1x freely movable foot switch, including EMERGENCY stop button - front finger protection - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325336
Datasheet
Request / Contact
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94181 · Plate Shear - Mechanical
HM - NWKS 2000/3 - - 2010 - DIGI
Technical details
** Machine from a maintenance workshop ** maintained condition (!!) Furnishing: - robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.5 KW) - electro-motorized backgauge, including digital control unit * Adjustment range max. 1.000 mm * Input of target / actual value possible - manual cutting gap adjustment, adjustable from the front - 1x table side stop - Ball rollers in the support table - 1x freely movable foot switch, including EMERGENCY stop button - front finger protection - original instruction manual
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94167 · Plate Shear - Mechanical
SCHRÖDER - MHSU 1500/2,0 - - 2009 -
Technical details
- manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94125 · Plate Shear - Mechanical
SCHROEDER - MHSUV 2000/4,0 - - 2008 - POS 100
Technical details
** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9325303 · Plate Shear - Mechanical
SCHROEDER - MHSUV 2000/4,0 - - 2008 - POS 100
Technical details
** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325303 * Machinevideo : https://www.youtube.com/watch?v=5w-LdgCg6J8
Datasheet
Request / Contact
- HESSE+CO Maschinenfabrik GesmbH
- Straße 4 Objekt 8
- 2351 Wiener Neudorf
- Österreich
-
+43/2236/638 70-0
+43/2236/636 62 -
office@hesse-maschinen.com
https://www.hesse-maschinen.com
#1069-2219 · Plate Shear - Mechanical
HESSE by DURMA - RGM 1303 - - 2004 -
Technical details
manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO
Datasheet
Request / Contact
- WeMa Antonius Pigge GmbH
- Barnstorfer Str. 3
- 49424 Goldenstedt
- Deutschland
-
+49 (0)444496700
+49 (0)4444967010 -
info@wema-pigge.de
www.wema-pigge.de
#2031-3794 · Plate Shear - Mechanical
SCHRÖDER FASTI - MSS DUO-CUT - - 1999 -
Technical details
3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand
Datasheet
Request / Contact
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94042 · Plate Shear - Mechanical
FORMAT - TS2-1000-50 - - 1997 -
Technical details
** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch
- A + B Werkzeuge Maschinen Handels GmbH
- Rottweg 17
- 48683 Ahaus
- Deutschland
-
(0049)-2561-9384-71
(0049)-2561-9384-36 -
info@ab-maschinen.de
www.ab-maschinen.de
#1008-9325255 · Plate Shear - Mechanical
FORMAT - TS2-1000-50 - - 1997 -
Technical details
** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch
Datasheet
Request / Contact
- Karl Günter Wirths GmbH
- Scharpenberger Strasse 96-98
- 58256 Ennepetal
- Deutschland
-
02333-79050
02333-790555 -
sales@wirths.net
www.wirths.net
#1041-18192 · Plate Shear - Mechanical
FASTI - 527 - - 1997 -
Technical details
It has an electronic back gauge with digital readout. It has 1 side guiding arm, 2 support arm, foot switch etc. It has a sheet holding device at the back side.
Datasheet
Request / Contact
- RS Sperling
- von-Braun-Str. 20
- 46244 Bottrop
- Deutschland
-
+49 (0) 2045 / 41 43 22-0
+49 (0) 2045 / 41 43 22-9 -
info@rs-sperling.de
www.rs-sperling.de
#1100-092052 · Plate Shear - Mechanical
DURMAZLAR - RGM 2550 x 2,5 - - 1996 -
Technical details
- B&R Service GmbH
- Esslingerstr.8
- 73776 Altbach
- Deutschland
-
+49 (0)7153 99 46 565
+49 (0)7153 99 46 568 -
info@b-r-service.de
www.b-r-service.de
#2025-0223351 · Plate Shear - Mechanical
CIDAN - MS-X2050/4,0 - - 1995 - Elgo P71
Technical details
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94186 · Plate Shear - Mechanical
CIDAN - HSM 2050 x 1,5 - - 1994 -
Technical details
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94168 · Plate Shear - Mechanical
FASTI - 506-10-2,5 - - 1991 -
Technical details
Manually adjustable back gauge up to 530 mm Cutting angle adjustment Side stop and table extension Knife sharpened
TOP Manufacturer:
SUHNER -