'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          2-roll bar straightening machine

          Machinelist: 2-roll bar straightening machine


          2-roll bar straightening machine

          used Bar processing / Bar manufacturing 2-roll bar straightening machine BRONX PBRV 6


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403068 · 2-roll bar straightening machine

          BRONX - PBRV 6 - - 1975 -

          Technical details

          2- ROLL BAR STRAIGHTENING MACHINE for black bars constr. Bronx type hyperbolic type no. PBRV 6 year 1975 working range 15 - 120 mm Ø max. for carbon + alloy steel round as rolled bars: 19 - 108 mm Ø max. Bar Feeding equipment: The machine is equipped with Automatic In- Feed and Out-Feed bar handling system, with bar storage and discharge pockets for bar length 7 m 2 vertically opposed work rolls, each roll driven by 30/60 kW AC motor, 440 V / 50 Hz via universal drive shaft from gearbox. roll angle adjustment 10 to 20 degrees hydraulic load control incorporated in bottom roll housing straightening speeds 15 and 30 m/min. Top roll vertical adjustment via 2,2 kW motor working direction left to right Operational control from central control desk The machine consists of: Machine body 2 x drive gearboxes 2 x universal drive shafts in-feed table out-feed table In-going bar storage racks out-going bar collection pockets control panel control desk spare parts including one set of work rolls weight of the straightening machine 25,4 to. total weight 32 to
            Description :
            2- ROLL BAR STRAIGHTENING MACHINE for black bars
            constr. Bronx
            type hyperbolic
            type no. PBRV 6
            year 1975

            working range 15 - 120 mm Ø max.
            for carbon + alloy steel round as rolled bars: 19 - 108 mm Ø max.

            Bar Feeding equipment:
            The machine is equipped with Automatic In- Feed and Out-Feed bar handling system, with bar storage and discharge pockets for bar length 7 m
            2 vertically opposed work rolls, each roll driven by 30/60 kW AC motor, 440 V / 50 Hz via universal drive shaft from gearbox.
            roll angle adjustment 10 to 20 degrees
            hydraulic load control incorporated in bottom roll housing
            straightening speeds 15 and 30 m/min.
            Top roll vertical adjustment via 2,2 kW motor
            working direction left to right
            Operational control from central control desk

            The machine consists of:
            Machine body
            2 x drive gearboxes
            2 x universal drive shafts
            in-feed table
            out-feed table
            In-going bar storage racks
            out-going bar collection pockets
            control panel
            control desk
            spare parts including one set of work rolls

            weight of the straightening machine 25,4 to.
            total weight 32 to

          used Bar processing / Bar manufacturing 2-roll bar straightening machine BRONX PBRV 6


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403680 · 2-roll bar straightening machine

          BRONX - PBRV 6 - - 1975 -

          Technical details

          2- ROLL BAR STRAIGHTENING MACHINE for black bars constr. Bronx type hyperbolic type no. PBRV 6 year 1975 working range 19 - 108 mm Ø max. for carbon + alloy steel round as rolled bars: 19 - 108 mm Ø max. Bar Feeding equipment: The machine is equipped with Automatic In- Feed and Out-Feed bar handling system, with bar storage and discharge pockets for bar length 7 m 2 vertically opposed work rolls, each roll driven by 30/60 kW AC motor, 440 V / 50 Hz via universal drive shaft from gearbox. roll angle adjustment 10 to 20 degrees hydraulic load control incorporated in bottom roll housing straightening speeds 15 and 30 m/min. Top roll vertical adjustment via 2,2 kW motor Operational control from central control desk The machine consists of: Machine body 2 x drive gearboxes 2 x universal drive shafts in-feed table out-feed table In-going bar storage racks out-going bar collection pockets control panel control desk weight of the straightening machine 25,4 to. total weight 32 to
            Description :
            2- ROLL BAR STRAIGHTENING MACHINE for black bars
            constr. Bronx
            type hyperbolic
            type no. PBRV 6
            year 1975

            working range 19 - 108 mm Ø max.
            for carbon + alloy steel round as rolled bars: 19 - 108 mm Ø max.

            Bar Feeding equipment:
            The machine is equipped with Automatic In- Feed and Out-Feed bar handling
            system, with bar storage and discharge pockets for bar length 7 m
            2 vertically opposed work rolls, each roll driven by 30/60 kW AC motor, 440 V /
            50 Hz via universal drive shaft from gearbox.
            roll angle adjustment 10 to 20 degrees
            hydraulic load control incorporated in bottom roll housing
            straightening speeds 15 and 30 m/min.
            Top roll vertical adjustment via 2,2 kW motor
            Operational control from central control desk

            The machine consists of:
            Machine body
            2 x drive gearboxes
            2 x universal drive shafts
            in-feed table
            out-feed table
            In-going bar storage racks
            out-going bar collection pockets
            control panel
            control desk

            weight of the straightening machine 25,4 to.
            total weight 32 to

          used Bar processing / Bar manufacturing 2-roll bar straightening machine Deutscher Hersteller 2-Walzen


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403613 · 2-roll bar straightening machine

          Deutscher Hersteller - 2-Walzen - - 2018 -

          Technical details

          New machine Two-roller straightening and polishing machine different sizes. Working range: from 6 - 120 mm PLEASE ASK FOR YOUR NEEDS
            Description :
            New machine
            Two-roller straightening and polishing machine

            different sizes.

            Working range: from 6 - 120 mm

            PLEASE ASK FOR YOUR NEEDS
          used Bar processing / Bar manufacturing 2-roll bar straightening machine FARMER NORTON 4


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403426 · 2-roll bar straightening machine

          FARMER NORTON - 4 - - -

          Technical details

          2-roll bar straightening machine constr. Farmer Norton size: 4 working range: 12.7 - 102 mm Ø bar length: up to approx. 7.5 Meter The machine is complete with: - inlet table - inlet roller conveyor - straightening machine - outlet roller conveyor - collecting rack
            Description :
            2-roll bar straightening machine

            constr. Farmer Norton
            size: 4
            working range: 12.7 - 102 mm Ø
            bar length: up to approx. 7.5 Meter

            The machine is complete with:
            - inlet table
            - inlet roller conveyor
            - straightening machine
            - outlet roller conveyor
            - collecting rack

          used Bar processing / Bar manufacturing 2-roll bar straightening machine KIESERLING WRP 100


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403420 · 2-roll bar straightening machine

          KIESERLING - WRP 100 - - 1995 -

          Technical details
          working area 12 - 100 mm︱Bar length 2 500 - 9 000 mm︱speed max. 80 m/min︱
          2 - ROLL STRAIGHTENING AND POLISHING MACHINE for bright bars and tubes Constr.: KIESERLING Type: WRP 100 year: 1995 condition: excellent The machine can be used for straightening and polishing drawn or peeled (bright) bars and for straightening of middle-sized or thick walled tubes, whereas the ends are straightened as well. Working range 12 mm up to 100 mm Ø straightening force 900 kN speed up to 80 m/min. infinitely variable bar lengths 2500 - 9000 mm drive motors 2 x 110 kW, 400 V, 50 Hz The machine consists of: ======================== - inlet table - inlet channel 9000 mm - hydraulically inlet duo with inclined rollers - main machine body with 2 gear boxes constr. Flender and 2 motors - hydraulically outlet - roller - Duo - outlet channel 9500 mm - collecting rack - electrical cabinet, command desk, hydraulic system Total weight: approx. 28,5 to.
            working area 12 - 100 mm
            Bar length 2 500 - 9 000 mm
            speed max. 80 m/min
            Description :
            2 - ROLL STRAIGHTENING AND POLISHING MACHINE for bright bars and tubes

            Constr.: KIESERLING
            Type: WRP 100
            year: 1995
            condition: excellent


            The machine can be used for straightening and polishing drawn or peeled
            (bright) bars and for straightening of middle-sized or thick walled tubes,
            whereas the ends are straightened as well.

            Working range 12 mm up to 100 mm Ø
            straightening force 900 kN

            speed up to 80 m/min. infinitely variable

            bar lengths 2500 - 9000 mm

            drive motors 2 x 110 kW, 400 V, 50 Hz

            The machine consists of:
            ========================
            - inlet table
            - inlet channel 9000 mm
            - hydraulically inlet duo with inclined rollers
            - main machine body with 2 gear boxes constr. Flender and 2 motors
            - hydraulically outlet - roller - Duo
            - outlet channel 9500 mm
            - collecting rack
            - electrical cabinet, command desk, hydraulic system

            Total weight: approx. 28,5 to.

          used Bar processing / Bar manufacturing 2-roll bar straightening machine KIESERLING WRPH 80/110 B


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403284 · 2-roll bar straightening machine

          KIESERLING - WRPH 80/110 B - - 1980 -

          Technical details

          Two-Roll Bar Straightening Machine Constr. Kieserling Model WRPH 80/110 B year 1980 Extract from a KIESERLING brochure about the functioning principal of the machine: "The Two-Roll Straightening Machines, Type WRPH, serve for machining of hot rolled or forged bars with usual dia. tolerances as well as of bright-drawn or peeled material. Bright-drawn and peeled round bars will be straightened and polished in the two vertically arranged straightening rolls. The lower roll holder rests on the bottom part of the machine, thus forming a rigid machine. For straightening of black bars the bottom roll is supported by a hydraulic cushion, thereby absorbing diameter tolerances and ovality at almost constant straightening pressure. In addition to bars also thick-walled tubes can be straightened. The machines type WRPH are especially adapted for straightening of high resistance material with a max. yield strength 01 110 kp/mm2. All machines are supplied with centralized adjustment of guiding gibs and a device for quick exchange of straightening rolls and guiding gibs. Upon request the machines can be laid out to the "bar to bar" version which means that the bars can be fed into the machine without any gap In between. This design guarantees highest possible efficiency. " The machine consists of: - main machine body with mounted straightening rollers - 2 main draft shafts - 2 gear boxes - 2 three-phase motors, each 30 kW - outlet duo - hydraulic system - 2 sets spare straightening rollers (1 set of which mounted on roller frame holder) HOWEVER WITHOUT ELECTRICAL CABINET weight: approx. 18,0 to.
            Description :
            Two-Roll Bar Straightening Machine

            Constr. Kieserling
            Model WRPH 80/110 B
            year 1980

            Extract from a KIESERLING brochure about the functioning principal of the
            machine:
            "The Two-Roll Straightening Machines, Type WRPH, serve for machining of hot
            rolled or forged bars with usual dia. tolerances as well as of bright-drawn or
            peeled material. Bright-drawn and peeled round bars will be straightened and
            polished in the two vertically arranged straightening rolls. The lower roll
            holder rests on the bottom part of the machine, thus forming a rigid machine.
            For straightening of black bars the bottom roll is supported by a hydraulic
            cushion, thereby absorbing diameter tolerances and ovality at almost constant
            straightening pressure. In addition to bars also thick-walled tubes can be
            straightened.
            The machines type WRPH are especially adapted for straightening of high
            resistance material with a max. yield strength 01 110 kp/mm2. All machines are
            supplied with centralized adjustment of guiding gibs and a device for quick
            exchange of straightening rolls and guiding gibs. Upon request the machines
            can be laid out to the "bar to bar" version which means that the bars can be
            fed into the machine without any gap In between. This design guarantees
            highest possible efficiency. "

            The machine consists of:
            - main machine body with mounted straightening rollers
            - 2 main draft shafts
            - 2 gear boxes
            - 2 three-phase motors, each 30 kW
            - outlet duo
            - hydraulic system
            - 2 sets spare straightening rollers (1 set of which mounted on roller frame
            holder)

            HOWEVER WITHOUT ELECTRICAL CABINET

            weight: approx. 18,0 to.


          used Bar processing / Bar manufacturing 2-roll bar straightening machine KIESERLING WRPH80


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403660 · 2-roll bar straightening machine

          KIESERLING - WRPH80 - - 1971 -

          Technical details

          2-roll bar straightening polishing machine Construction: Kieserling Type: WRPH 80 Year: 1971 Working range: Ø 20 - 80 mm Three-phase motor a.c. motor left and right Main drive: 2x 45 kW 1475 rpm 230 / 380 V Transmission gear: 2x 20 / 45 kW i=50,5/36,4/26/18,65/13,2/9,55 kompete line Weight: approx. 25 to. Video upton request
            Description :
            2-roll bar straightening polishing machine

            Construction: Kieserling
            Type: WRPH 80
            Year: 1971

            Working range: Ø 20 - 80 mm

            Three-phase motor a.c. motor left and right
            Main drive: 2x 45 kW 1475 rpm 230 / 380 V

            Transmission gear: 2x 20 / 45 kW i=50,5/36,4/26/18,65/13,2/9,55

            kompete line

            Weight: approx. 25 to.

            Video upton request
          used Bar processing / Bar manufacturing 2-roll bar straightening machine KIESERLING WRPH80


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-103548 · 2-roll bar straightening machine

          KIESERLING - WRPH80 - - 1971 -

          Technical details

          2-roll bar straightening - polishing machine Construction: Kieserling Type: WRPH 80 Year: 1971 Working range: Ø 20 - 80 mm Three-phase motor a.c. motor left and right Main drive: 2x 45 kW 1475 rpm 230 / 380 V Transmission gear: 2x 20 / 45 kW i=50,5/36,4/26/18,65/13,2/9,55 complete line with: - feeding table - inlet roller way with bar separation - inlet drive duo - straightening machine - outlet duo - outlet roller way - collecting rack - electrical cabinet - command desk with device to change the straightening rolls and 2 complete spare straightening rollers with holder and bearings 1 spare cardan shaft cooling tank with pump Weight: approx. 26 to. https://youtu.be/5oYD_QwD2wM
            Description :
            2-roll bar straightening - polishing machine

            Construction: Kieserling
            Type: WRPH 80
            Year: 1971

            Working range: Ø 20 - 80 mm

            Three-phase motor a.c. motor left and right
            Main drive: 2x 45 kW 1475 rpm 230 / 380 V

            Transmission gear: 2x 20 / 45 kW i=50,5/36,4/26/18,65/13,2/9,55



            complete line with:
            - feeding table
            - inlet roller way with bar separation
            - inlet drive duo
            - straightening machine
            - outlet duo
            - outlet roller way
            - collecting rack
            - electrical cabinet
            - command desk

            with device to change the straightening rolls
            and 2 complete spare straightening rollers with holder and bearings
            1 spare cardan shaft
            cooling tank with pump

            Weight: approx. 26 to.

            https://youtu.be/5oYD_QwD2wM
          used Bar processing / Bar manufacturing 2-roll bar straightening machine KIESERLING WRPT 2


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-402961 · 2-roll bar straightening machine

          KIESERLING - WRPT 2 - - 1974 -

          Technical details

          2-ROLL STRAIGHTENING MACHINE Constr. KIESERLING Type WRPT 2 Year: 1974 Drawn Sections: Ø 10 mm ÷ 45 mm Speed: 25 m/min Line composed of: table entry canal straightener gear-boxes and motors exit canal colletcing pockets electric equipment (new in 1996) Machine in good conditions.
            Description :
            2-ROLL STRAIGHTENING MACHINE

            Constr. KIESERLING
            Type WRPT 2
            Year: 1974

            Drawn Sections: Ø 10 mm ÷ 45 mm
            Speed: 25 m/min

            Line composed of:

            table
            entry canal
            straightener
            gear-boxes and motors
            exit canal
            colletcing pockets
            electric equipment (new in 1996)

            Machine in good conditions.
          used Bar processing / Bar manufacturing 2-roll bar straightening machine KIESERLING WRPT2


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403661 · 2-roll bar straightening machine

          KIESERLING - WRPT2 - - 1964 -

          Technical details

          2-roll bar straightening and polishing machine Make: Kieserling Type: WRPT2 Year of construction: 1964 Working area: Ø 10 - 35 mm
            Description :
            2-roll bar straightening and polishing machine

            Make: Kieserling
            Type: WRPT2
            Year of construction: 1964


            Working area: Ø 10 - 35 mm
          •   
          •   
          • 1  

            Профіль торговця: Franz Teutenberg GmbH & Co KG

          Зв'язатися з трейдером



            Franz Teutenberg GmbH & Co KG
           Am Nordkanal 34-36
            47877 - Вілліч
            Німеччина
            02154 95790 "> 02154 95790
            02154 9579 29
            info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com

          Профіль Трейдера

          Franz Teutenberg-Maschinen GmbH & Co KG

          Наша компанія Franz Teutenberg GmbH & Co KG була заснована в 1966 році і з тих пір спеціалізується на торгівлі вживаними машинами та установками для прокатних станів, напівфабрикатних верстатів та волочильних верстатів, що працюють на дроті, прутках, аркушах і листах, смугах і трубах.

          Ми розміщуємо більше, ніж 100 спеціальні машини на площі близько 3.000 кв.

          Ми можемо запропонувати Вам нові або навряд чи використані машини, які або були продані їх попередніми власниками внаслідок реорганізаційних заходів або оригінальних у власність банкрутів. Ми також зберігаємо старі спеціальні виробничі машини та установки, які все ще дають багаторічний термін служби, що дозволяє досягти значних заощаджень у капітальних витратах. 

          Крім того, ми також пропонуємо посередництво:
          - нових машин
          - капітального ремонту машин
          - з ремонту або модернізації машин.

          НАША ПРОГРАМА ДОСТАВКИ
          Нашим основним видом діяльності є машини, такі як: 

          10-крен випрямлення машини 2-крен випрямлення машини 3-крен випрямлення машини 6-рулон трубки випрямлення машини 7-крен випрямлення машини 7-рулон трубки випрямлення машини 9-рулон бар випрямлення машини 9-рулон трубки випрямлення машини Допоміжні машини Машини для креслення Допоміжні машини для креслення Допоміжні машини для креслення Барний пілінг-машина Барний шиномонтажний верстат Шліфувальний верстат Щітковий відбійник Стиковий зварювальний апарат Безконтактний шліфувальний і шліфувальний верстат Фреза Холодна циркулярна пила Конвеєрна система Декоалер Декаллер Декаллер Натяжний стенд Стяжка Стійка дрібна машина Згинальна стрілка Покажчик Молоток Чотири прес-колони - Гідравлічний шліфувальний верстат - Безцентровий багаторазовий волочильний верстат Маніпулятор Напрямна машина Ripo Машини для вальцювання Машини для обробки листового металу Листовий випрямляючий верстат Лінія для випалу дроту Одномісячний блок Зварювальний апарат Випрямляючий верстат - Барний випрямляючий прес - Горизонтальна труба Машина для випрямлення труб Зварювальна трубка для вертикальних токарських верстатів Дріт для намотування дроту - Машина для намотування дроту Сітка для зварювання дроту Машина для шліфування дротуМашина прокатки дроту Машина для випрямлення та різання дроту

          адреса

          Franz Teutenberg GmbH & Co. KG
          Am Nordkanal 34-36
          D-47877 Вілліх
          (Düsseldorf Flughafen)

          Wie Sie zu uns finden

          Знову не вдалося запустити 52 у Richtung Düsseldorf: Ausfahrt Вілліх Шифбан, посилання. Bis zur nächsten Ampelkreuzung, rechts. Vorfahrtsstraße folgen, 2. Штрасе посилання (= Am Nordkanal).
          Знову не вдалося запустити 52 в Richtung Mönchengladbach: Ausfahrt Вілліх Шифбан, речтс. Bis zur nächsten Ampelkreuzung, rechts. Vorfahrtsstraße folgen, 2. Штрасе посилання (= Am Nordkanal).




          TOP Manufacturer:

          Franz Teutenberg GmbH  &  Co KG   47877 - Willich Am Nordkanal 34-36 Deutschland
          Franz Teutenberg GmbH & Co KG

          Am Nordkanal 34-36



          Contact Trader


            Franz Teutenberg GmbH & Co KG
           Am Nordkanal 34-36
            47877 - Willich
            Deutschland
            02154 95790
            02154 9579 29
            info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
            Contact person:

           




          Machine category


          Anspitzmaschine · Anspitzwalze · Drahtziehmaschine · Faltangelpressen · Rohrziehmaschine · Ziehbänke ·