Indexing Device
Machinelist: Indexing Device
Bars automatic charger
- Horn Werkzeugmaschinen
- Görlitzer Straße 65
- 78052 Villingen-Schwenningen
- Deutschland
-
+49 7721 993 7994
-
horn@horn-wzm.de
www.horn-wzm.de
#2082-230943 · Bars automatic charger
FMB / Star - LSK 38_3200 A - - 2020 -
Technical details
used FMB LSK 38 / 3200 "A" Automatic loading magazine for bar feeding Material bars from 5 - 42 mm diameter. - Bar storage on inclined lateral material support (loading capacity (loading capacity 240 mm). - Precise servo-electric feed drive. - Oil-flooded guide channel based on the turbo principle developed and patented by FMB and patented turbo principle for optimum bar guidance. - Quick and easy to replace guide channel inserts - Material gripper for securely pulling on the material bar and bar and removal of the remaining piece. - Steady rest for optimum bar guidance between the guide channel and lathe spindle. - Ergonomic and intuitive operation via mobile 8.4" touch control panel with ERGOlogic operating concept. Attachment variant "A" Feeding from the left, material support at the front Interface type STANDARD 1 x connector: 24 contacts. 1 conversion kit Documentation German CE - Declaration of Conformity Dimensions (LxWxH): approx. 4300 x 1200 x 1600 [mm] Weight: approx. 1400 [kg] The machine can be inspected under power by appointment. Changes and errors in the technical data and information as well as prior sale reserved!
Datasheet
Request / Contact
- Horn Werkzeugmaschinen
- Görlitzer Straße 65
- 78052 Villingen-Schwenningen
- Deutschland
-
+49 7721 993 7994
-
horn@horn-wzm.de
www.horn-wzm.de
#2082-230995 · Bars automatic charger
Top Automationi - RECORD S 335DX - - 2013 -
Technical details
used Top Automationi RECORD-S / 3200 IntNo230995 Automatic loading magazine for bar feeding Material bars from 6 - 45 mm diameter. Single-surface magazine at the top with a usable area of 280 mm TOP AUTOMAZIONI is able to provide all the interfaces required by the various machine manufacturers, e.g. 24-pole interface, PROFIBUS interface, ETERCAT interface or modular multipolar interfaces. The loader is controlled by an integrated PLC, which regulates the feed speed, thrust and all other relevant parameters via a brushless motor and digital solenoid valves. Dimensions (LxWxH): approx. 4528 x 1200 x 1600 [mm] Weight: approx. 1800 [kg] The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information as well as prior sale!
Datasheet
Request / Contact
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-18975 · Bars automatic charger
KUPA - LM 1000 - - 2007 -
Technical details
2 pieces bar feeder available
Datasheet
Request / Contact
- Horn Werkzeugmaschinen
- Görlitzer Straße 65
- 78052 Villingen-Schwenningen
- Deutschland
-
+49 7721 993 7994
-
horn@horn-wzm.de
www.horn-wzm.de
#2082-230937 · Bars automatic charger
FMB - Turbo 10-72 XT /3200 - - 2003 - FMB
Technical details
Loading magazine / Bar feeder / Bar loading magazine Make FMB Turbo 10-72XT / 3200 "C" Bar diameter Ø10-72mm Bar length: 3200mm Year of manufacture: 2003 Accessories: complete unit incl.: Telescopic tube, built-in conversion kit, synchronizer, manuals Approx. dimensions: 5470 mm (length) × 800 mm (width) × 1350 mm (height) Weight: 1250 kg This bar feeder is well suited for processing bar stock in a variety of applications. If you need more information, please do not hesitate to contact me! The machine can be viewed by appointment. Subject to changes and errors in the technical data and information as well as prior sale!
Datasheet
Request / Contact
- Knops Werkzeugmaschinen
- Konrad-Zuse-Straße 5
- 40789 Monheim
- Deutschland
-
02173 - 39494-0
02173 - 39494-29 -
maschinen@knops.de
www.knops.de
#1022-0089 · Bars automatic charger
BREUNING-IRCO - SIMAG 100.1-3000 - - 05/2008 -
Technical details
With control panel HBG 10
- Horn Werkzeugmaschinen
- Görlitzer Straße 65
- 78052 Villingen-Schwenningen
- Deutschland
-
+49 7721 993 7994
-
horn@horn-wzm.de
www.horn-wzm.de
#2082-230959 · Bars automatic charger
LNS - Hydrobar 6.65 HS - 4.8 - - -
Technical details
used LNS Hydrobar, type 6.65 - 4.8 IntNo230959 Single bar feeder, functional. Material bars from 6 - 65 mm diameter. - incl. various inserts for best material guidance - oil-flooded guide channel principle LNS - was attached to a CNC lathe Spinner TC 52 - Interface type STANDARD - Documentation German - CE - Declaration of Conformity - Dimensions (LxWxH): approx. 4700 x 1000 x 1400 [mm] - Weight: approx. 1000 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved!
Datasheet
Request / Contact
Indexing Device
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-09204 · Indexing Device
WENIG - HT 130 - - unbenutzt -
Technical details
Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m².
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S1821 · Indexing Device
WALTER - UTA 160 - - unbekannt -
Technical details
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S3194 · Indexing Device
FRITZ WERNER - T.212T - Spitzenhoehe 180mm - - unbekannt -
Technical details
Center height: approx. 180mm dimension Length: about 480mm Width: about 450mm Height: 280mm Weight: 110kg
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-C1710 · Indexing Device
WALTER - UTA200N - Ø315 mm - - unbekannt -
Technical details
Center height: approx. 265mm dimension Length: about 800mm Width: about 600mm Forkart Chuck F315 Lining passage: 80mm Weight: 295kg
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-C1709 · Indexing Device
UNBEKANNT - Ø300 mm - - unbekannt -
Technical details
dimension Length: about 430mm Width: approx. 530mm Height: about 370mm Weight: 140kg
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-C1712 · Indexing Device
UNBEKANNT - Ø190 mm - schwenkbar - - unbekannt -
Technical details
Center height: approx. 215mm dimension Length: about 370mm Width: about 260mm Height: approx. 340mm Chuck diameter: 190mm Lining passage: 60mm Weight: 75kg NEIGHBOR
Datasheet
Request / Contact
- EnTeHa GmbH & Co.KG
- Im Wollenklingen 6
- 69517 Gorxheimertal
- Deutschland
-
+49 6201 2630 545
-
info@enteha.de
www.enteha.de
#2081-4588 · Indexing Device
DECKEL - 2212 - - unbekannt -
Technical details
- G. FOLMER Industriebedarf
- Mangenbergerstr. 347
- 42655 Solingen
- Deutschland
-
+49 21241071
+49 21241276 -
folmer.maschinen@t-online.de
Datasheet
Request / Contact
- Karl Günter Wirths GmbH
- Scharpenberger Strasse 96-98
- 58256 Ennepetal
- Deutschland
-
02333-79050
02333-790555 -
sales@wirths.net
www.wirths.net
#1041-26761 · Indexing Device
HECKERT - - - 1988 -
Technical details
Dividing head swivable of a Heckert FU 400
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S1801 · Indexing Device
PEISELER - Set / Lynette + Reitstock - - 1987 -
Technical details
Datasheet
Request / Contact
- HANS - JÜRGEN GEIGER
- James-Watt-Str. 12
- 72555 Metzingen
- Deutschland
-
(0049)-7123-18040
(0049)-7123-18384 -
geiger@geiger-germany.com
www.geiger-germany.com
#1049-387955 · Indexing Device
SCHMID-KOSTA - AT 400 - - 1985 -
Technical details
- Kirchgeorg Werkzeugmaschinen
- Frankfurter Straße 141
- 63303 Dreieich-Sprendlingen
- Deutschland
-
0049-(0)-6103-9909-0
0049-(0)-6103-9909-50 -
info@kirchgeorg.de
www.kirchgeorg.de
#1072-A2435 · Indexing Device
JAEGER - UTB - - 1983 -
Technical details
- S/N: 1117 - AROWA three-jaw chuck including jaws - indexing every 15°
Datasheet
Request / Contact
- Plum & Partner Werkzeugmaschinen GmbH
- Winkelstraße 32
- 32257 Bünde
- Deutschland
-
+49 05223 574444
+49 5223188330 -
info@plum-maschinen.de
www.plum-maschinen.de
#1082-09261 · Indexing Device
JUNG - OTA 76 - - 1976 -
Technical details
Datasheet
Request / Contact
- Kirchgeorg Werkzeugmaschinen
- Frankfurter Straße 141
- 63303 Dreieich-Sprendlingen
- Deutschland
-
0049-(0)-6103-9909-0
0049-(0)-6103-9909-50 -
info@kirchgeorg.de
www.kirchgeorg.de
#1072-A2475 · Indexing Device
JUNG - OTA 76 - - 1976 -
Technical details
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-M1253 · Indexing Device
PEISELER - Wendespanner Ø710mm - - 1972 -
Technical details
Make: Peiseler Type: HW710 Diameter: Ø 710mm Weight: approx. 450 kg
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-A931885 · Indexing Device
UNBEKANNT - Wendespanner / Teilapparat - - / -
Technical details
Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Item Features: Our offers are used items, i.e. can Soiling, storage marks, damage, such as scratches and color defects may also be present. Errors in technical data and description reserved
Datasheet
Request / Contact
- WMT GmbH & Co.KG
- Siemensstraße 1
- 46342 Velen-Ramsdorf
- Deutschland
-
+49 2863 92477-47
+49 2863 92477-50 -
info@w-m-t.de
www.w-m-t.de
#1108-80092 · Indexing Device
WMT - Teiltisch HV8 - - -
Technical details
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-Z00671 · Indexing Device
WALTER - - - -
Technical details
diameter: 400