Outside profiling machine
Machinelist: Outside profiling machine
Outside profiling machine
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2706 · Outside profiling machine
WEINIG - Univar 10/3 - - gebraucht -
Technical details
Weinig Univar 10/3 folding machine --------------------------------- Machine will be cleaned and chcked before delivery For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) -------------------------------------------------- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ---------------------- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 3. Profiling spindle ---------------------- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ------------------------------------------------- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. Feed rollers - D : 95 mm Feed roller width 50/30 mm Feed roller spacing 100/120 mm -------------------------------- Screen control with 150 programs. 1 program is each 1 individual part and includes 2 end profiles and 1 longitudinal profile. Pro programs are for end processing 20 different profiles can be selected for Longitudinal machining of 40 different profiles 1 can be selected (in turning mode 2). When manufacturing, e.g. a frame, up to 8 different programs (parts) can be saved. The program memory can be organized so that up to 18 frames or sashes with a maximum of 8 parts each can be stored. Manufacturing options: - Individual parts - Double parts - frame by frame - in series - Milling Data entry via keyboard with integrated Operator guidance and error diagnosis. ---------------------------------- Length: 4000mm (Length of frame milling ruler: 4500 mm) Width: 2000mm Height: 2200mm (Technical information according to the manufacturer, no guarantee!)
12.000 €
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6828 · Outside profiling machine
Okoma - UF 2 EG mit Schleifeinheit - - gebraucht -
Technical details
1 OKOMA folding machine model UF 2 EG ------------------------------------- 1. Energy data: - Operating voltage: 3 phases, 380 V, 50 Hz. - Compressed air: Air requirement: 13 NL/min. Operating pressure: 8 bar up. Air: according to Pneurop 6611 2. Profile spindle 1: - Spindle arrangement: right - Power 11 kW - Speed ??7000 rpm - Direction of rotation: synchronous and counter rotation - Spindle diameter 40 mm - Usable length 252 mm - Tool diameter max. 230 mm - U-movement of the profile spindle - Positioning vertically Drive: pneumatic cylinder 120 mm cycle for 2 tool positions Position sensor: limit switch - Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch - Automatic immersion: immersion speed can be regulated for tear-free Fold over - Protective and suction hood with connecting piece 140 mm diameter. 3. Profile spindle 2: - Spindle arrangement: right - Power 11 kW - Speed ??7000 rpm - Direction of rotation: counter rotation - Spindle diameter 50 mm - Usable length 272 mm - Tool diameter max. 230 mm - U-movement of the profile spindle - Positioning vertically Drive: pneumatic cylinder 90 mm cycle for 3 tool positions Position sensor: limit switch - Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch - Protective and suction hood with connecting piece 140 mm diameter. 4. Fitting milling device EG: - Spindle arrangement on the right - Drive: three-phase motor 3 kW - Speed ??6000 rpm - Spindle diameter 30 mm - Usable length 47 mm - Vertical positioning: none - Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch (rear only) - Protective and suction hood with connection piece 80mm diameter 5. Stop: - 1st stop: in front of spindle 1 manual chip removal Quick adjustment via. parallelogram - 2nd stop: between spindles 1 and 2 Chip removal: pneumatically adjustable - 3rd stop: after spindle 2 Fixed stop 6. Grinder with automatic immersion and immersion 7. Feed: - Roller distance from axle to axle 130 mm - Roll diameter 110 mm - Roll width 50 mm - Feed can be swiveled away - with pneumatic travel control 8. Support rail for milling: - Rail length: approx. 3000 mm - Adjustment range forward: approx. 100 - 600 mm 9. Electrical control: - Programmable logic controller: Siemens electronics PC control, 30 programs, 380 V., 50 Hz. - Power section: Siemens S 5 - Non-contact limit switches More pictures on request! --------------------------- (technical data according to manufacturer - no guarantee!)
5.000 €
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6827 · Outside profiling machine
WEINIG - Univar 6 P - - gebraucht -
Technical details
Weinig Univar 6 P In order to sell ---------------------- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Control of tool positions via selector switch on the control panel. Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch in the control panel. Motor power: 2.2 KW Speed: 6000 rpm Spindle diameter: 40mm Clamping height: 125 mm Tool flight circle: min. 140 mm; max. 180 mm Basic position below table level: 10 mm Motor reinforcement for synchronous spindle from 4 KW to 7.5 KW Motor reinforcement for profiling spindle from 5.5 KW to 11 KW Screen controls for 99 window types. 1 type can hold up to 8 different parts contain. Manufacturing options: individual parts, milling. Data entry via Keyboard with integrated operator guidance and error diagnosis. Free-standing control cabinet --------------------------------- (technical data according to manufacturer - no guarantee!)
7.000 €
Datasheet
Request / Contact
Window production centre
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2732 · Window production centre
WEINIG - Unicontrol 6 NC Spindeln - - neuwertig - Weinig, PC-Nexus
Technical details
# 2732 Weinig Unicontrol 6 with NC spindles ------------------------------------------------ Machine is in checking process at the moment! Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ------------------------------------------------ > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ------------------------------------------------ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Adjustment path axially mechanically coupled to crosscut saw > Adjustment path radially pneumatically controlled on/off Length stop CNC controlled ------------------------------------------------ > Length 3500 mm > electronic length stop Pos. 3: Tap and slot spindle ------------------------------------------------ > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, CNC > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 4: 1. Profiling spindle (synchronous and counter-rotation) ------------------------------------------------ > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ------------------------------------------------ > Position: vertical right > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, NC > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (area of synchronous spindle), Rung support bar from above in the area of the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontally at the top ------------------------------------------------ > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed 9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment path 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fittings spindle) ------------------------------------------------ > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Pos. 8: Profile milling unit/grooving unit from below ------------------------------------------------ > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 200 mm Other features ------------------------------------------------ > online capable > Electric feed height adjustment including mechanical digital display and manual feed beam clamping > Folding device for tear-free folding > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Industrial PC, touchscreen with Windows PC control/NEXUS > with Weinig type production program Suction nozzle diameter: ------------------------------------------------ Crosscut saw 80 mm Slotted spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Fitting spindle 120 mm Grooving device from above 80 mm Grooving device from below 80 mm Option: used tools Oertli IV 68/78 wood and wood-aluminium (see warehouse number 6813) The technical characteristics of this machine should meet your expectations do not correspond, please contact us. Our A team with many years of experience will be happy to support you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6830 · Window production centre
WEINIG - Unicontrol 6 NC Spindeln - - gebraucht -
Technical details
Weinig Unicontrol 6 with NC spindles ----------------------------------- Technical data summary (please inquire about any additional accessories included) ................................... Generally ----------------------------------- > Loading dimensions: 7000 x 2400 x 2400 mm > Machine weight, approx.: 3700 kg crosscut saw ----------------------------------- > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Laser directional light to detect the saw section Electronically safe length stop ----------------------------------- > Length 3600 mm 1. Tap and slot spindle ---------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle (synchronous and counter-rotation) ----------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle ----------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ------------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Tool clamping length: 160 mm > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3 kW 4. Grooving device clocked horizontally + vertically at the top ------------------------------------- > Number of tools: 2 pieces. > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 130 mm > Motor power: 3 kW Other features ------------------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor system for 1-man operation > Screen controls > Slanted window device > Electronic angle display for sloping windows: > Control: PC control Nexus, CNC > Option: > Tools IV 68 Oertli > Tools IV 78 Leitz > Tools IV 92 Leitz If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! ----------------------------------- (technical information according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2728 · Window production centre
WEINIG - Unicontrol 12 NC - - gebraucht - Weinig, PC-Nexus
Technical details
Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ................................................ Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ................................................ crosscut saw ................................................ > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ................................................ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ................................................ > Length 4500 mm 1. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ................................................ Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 3. Profile milling unit (grooving device from above) ................................................ > Position: horizontal at the top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 30 mm NC axis, infinitely variable > Radial adjustment path 125 mm NC axis, infinitely variable > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 4. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Rung support bar clocked vertically after the last profiling spindle 5. Profile milling unit (fittings spindle) ................................................ > Position: vertical right > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment path 115 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 6. Profile milling unit (grooving device from above), in the additional stand ................................................ > Position: working vertically to the right from above > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 44 mm, 8 positions using a pneumatic turret > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 9,000 rpm > Tool flight circle max.: 130 mm 7. Profiling spindle (grooving device from below, in the additional stand) ................................................ > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment path 100 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions Other features ................................................ > online capable > Folding device for tear-free folding > Milling carriage for milling sashes with frame widths under 500 mm. Automatic pneumatic clamping > 9 feed rollers controlled up/down after the last profiling spindle faster and shorter milling process > Feed height adjustment with NC axis > Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140 mm > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Control: NEXUS PC control > Vario table with horizontal NC axis > Automatic central lubrication > Air conditioning unit in the control cabinet > Machine without processing tools If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! (Technical information according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2711 · Window production centre
WEINIG - Unicontrol 12 NC - - gebraucht - CNC, Weinig PC-Nexus
Technical details
Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .................................................. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .................................................. crosscut saw .................................................. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .................................................. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop .................................................. > Length 4500mm 1. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape .................................................. Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) .................................................. > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm 4. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 5. Profile milling unit (fitting spindle) .................................................. > Position: vertical right > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment range 115 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm 6. Profile milling unit (grooving device from above), in the additional stand .................................................. > Position: working vertically to the right from above > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 100 mm, 8 positions using pneumatic turret > Radial adjustment path 80 mm 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Tool flight circle max.: 180 mm 7. Profiling spindle (grooving device from below, in the additional stand) .................................................. > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment range 100 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm Other features .................................................. > online capable > Folding device for tear-free folding > 2 axially clocked feed rollers opposite profile milling units, for production of narrow, short parts (e.g. glazing bars) > 3 axially clocked feed rollers (2) opposite the profiling spindle 8 positions using pneumatic turret, for spindle 1,2,3 > 3 table tops indexed to the tool diameter (2 positions), profile spindle No. 3 and fitting spindle > 3 rung support rails cycled vertically after the last profiling spindle > Feed height adjustment with NC axis > Divided pressure ruler on the left for wood widths of 40-140 mm > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Control: NEXUS PC control > VARIOplus package for tapping and slotting table, including length stop, CNC-controlled, 4,500 mm timber length, including studio window installation, Swivel angle 75 degrees, horizontal CNC axis, adjustment range 200 mm > Automatic central lubrication > Air conditioning unit in the control cabinet Option: > used window tools OERTLI IV 68, 78 wood and wood-aluminium Window cuts on request! Should the technical characteristics of this machine not meet your expectations correspond, please contact us. Our longtime experienced team will be happy to support you with any adjustments or with the Find a machine that suits your needs! (Technical information according to the manufacturer - without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2654 · Window production centre
WEINIG - Unicontrol 6 NC Spindeln - - gebraucht - Weinig, PC-Nexus
Technical details
#2654 Weinig Unicontrol 6 with NC spindles ------------------------------------------------------ Machine is checked, ready for demonstration Specifications summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ---------------------------- > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.0 kW > Laser guide light for detecting the sawing section electronic length stop, mounted on slotted table included Positioning of the cross-cut saw integrated in the control. > Length 3500mm Pos. 2: tapping and slotted spindle ---------------------------- > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (synchronous spindle) ---------------------------- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ---------------------------- > Position: vertical right > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler at the stop (synchronous spindle area), Rung support strip from above in the area of ??the profile milling unit, vertically on the right and profiling spindle. Pos. 5: Profile milling unit horizontally above ---------------------------- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool cutting circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 8 positions Item 6: 3rd profiling spindle (fitting spindle) ---------------------------- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment path 100 mm, 8 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Other features ---------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Industrial PC, PC control/NEXUS > Weinig type production program If the technical characteristics of this machine do not meet your expectations please contact us. Our experienced team will be happy to support you with any adjustments or looking for an alternative machine that meets your requirements! (technical data according to the manufacturer - without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2725 · Window production centre
WEINIG - Unicontrol 6 - - gebraucht - Südtron BT 20
Technical details
Weinig Unicontrol 6 --------------------------------- General data --------------------------------- Loading dimensions approx. 5000x2400x2400 Machine weight approx. 3000 kg crosscut saw --------------------------------- > Pneumatic crosscut saw, against 8-fold turret stop > Spindle speed: 2800 > Spindle diameter: 40 mm > Tool diameter max.: 350 mm > Motor power: 3 kW > Laser directional light to detect the saw section Length stop - clocked --------------------------------- > Length stop 2700 mm 1. Tap and slot spindle --------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle - synchronous spindle (synchronous and counter-rotation) ---------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle --------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ---------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Spindle speed: 6000 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 180 mm > Motor power: 3 kW > Clamping length 150 mm > Horizontal: 2 positions > Vertical: 3 positions 4. Glass bead saw pneumatically up and down ---------------------------------- > Motor 3 kW Other features ---------------------------------- > Folding device for tear-free folding > Double parts package > Screen control 99 programs Sütron BT20 > Slanted window device > Electronic angle display for sloping windows > Return roller conveyor with push-off device > CE mark (technical data according to the manufacturer - no guarantee!)
7.500 €
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6864 · Window production centre
WEINIG, GOETZINGER - UC 10, Univar, SFM - - gebraucht -
Technical details
Weinig Unicontrol 10-5, built in 1993 Slotted spindle 6 x 100 mm 2 profile spindles length 320 mm, stroke 95 mm Fitting spindle with folding device with return and discharge device Weinig Univar 10 with olive drilling rig, built in 1990 3 spindles each 320 mm long, stroke 95 mm + Fitting milling device Götzinger SFM, built in 2011 -------------------------------- Milling machine for the locking parts in the frame with 4 mm clearance + Drilling corner bearing Includes tools for Weinig Unicontrol: Zuani Tools IV 68/78/90 wood, 68/78 aluminum 4 mm clearance -------------------------------- For sale on behalf of the customer ex location Machines are currently still in use -------------------------------- (Technical information according to the manufacturer - no guarantee!)
15.000 €
Datasheet
Request / Contact