'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Fitting centre

          Machinelist: Fitting centre


          Fitting centre

          used Window production: wood Fitting centre RUCHSER RU-BM-3000 Flügelmontagetisch


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2659 · Fitting centre

          RUCHSER - RU-BM-3000 Flügelmontagetisch - - Vorfuehrmaschine -

          Technical details
          0 ja, freitstehend ︱Working width 3000 mm︱0 ja
          RUCHSER wing assembly table RU-BM-3000 year of manufacture 2022 ----------------------------------------------------- The Ruchser sash fitting center enables efficient production post-economic aspects. Thought through to the last detail, the system maximum ease of use. Important advantages for you: Modular system, according to your wishes and requirements Grand piano assembly table put together Easy to use, even for inexperienced workers Equipment demonstration machine, alternative/optional equipment on request! Item 1.0: Item no. : 0610000 RU-BM-3000, sash assembly table, for sashes up to a maximum height of 2500 mm with RU-SH, special screwdriver length 3000 mm, width 1400 mm, incline of Working platform manually adjustable. Holder for hardware scissors or hardware punch. 10 pieces swiveling commuters to hang the Wing, completely pneumatically foldable to unimpeded movement of the wings on the tabletop. Device for scanning the sash fitting length for a constant and variable/central grip position and any handle seat height for already pre-drilled Sashes, colored measurement recognition for the fittings. Commuter height at a stop optionally set to 50 or 60 mm adjustable. RU-SH, special screwdriver with pneumatic Depth switch mounted on trolley, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container Manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw planes mounted on the carriage. RA-4 commuter rail in depth manual adjustable to the left and right one each 4-fold revolver stop. PSF - Pneumatic clamping device for wings against the side stops. Working height adjustable from 900 - 1000 mm. Please also specify whether felt, sliding or brushes perform as a requirement. Item 1.1: Item no. : 0500000 Bracket matched to customer punch/- scissors.For installing a customer-supplied Fitting punch or fitting scissors (other brand) at the wing assembly table. Please specify make when ordering !!! Note: A Somatec punch is attached to this demonstration table. This can be purchased as an option. Otherwise, the punch must be provided by the customer (by the hardware manufacturer) Item 1.2: Item no. : 6309 RU-BM-... Siegenia fitting discontinued Alternatively also adjustable to other fittings! Item 1.3: Item no. : 0710000 RU-SBL3000/30 free-standing fitting bearing, length 3100 mm, depth 1250 mm, height 2050 mm, stand frame on the front without supports, 30 compartments, 10 pieces each in a row Divided partitions and a continuous shelf top, size of the compartments: width 280 mm, height 150 mm. ----------------------------------------------------- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)
            0 ja, freitstehend
            Working width 3000 mm
            0 ja
            Description :
            RUCHSER wing assembly table RU-BM-3000 year of manufacture 2022
            -----------------------------------------------------
            The Ruchser sash fitting center enables efficient production
            post-economic aspects. Thought through to the last detail, the
            system maximum ease of use.

            Important advantages for you:

            Modular system, according to your wishes and requirements
            Grand piano assembly table put together

            Easy to use, even for inexperienced workers

            Equipment demonstration machine, alternative/optional equipment on request!

            Item 1.0: Item no. : 0610000
            RU-BM-3000, sash assembly table, for sashes up to a maximum height of 2500 mm
            with RU-SH, special screwdriver length 3000 mm, width 1400 mm, incline of
            Working platform manually adjustable.

            Holder for hardware scissors or hardware punch.
            10 pieces swiveling commuters to hang the
            Wing, completely pneumatically foldable to
            unimpeded movement of the wings on the
            tabletop.
            Device for scanning the sash fitting length
            for a constant and variable/central grip position
            and any handle seat height for already pre-drilled
            Sashes, colored measurement recognition for the fittings.
            Commuter height at a stop optionally set to 50
            or 60 mm adjustable.
            RU-SH, special screwdriver with pneumatic
            Depth switch mounted on trolley,
            safety control, pneumatic height adjustment,
            Screw feeder with
            automatic shutdown of the filling container
            Manual insertion for a second screw length
            on the special screwdriver, accessories.
            RA-8, turret stop for 8 screw planes
            mounted on the carriage.
            RA-4 commuter rail in depth manual
            adjustable to the left and right one each
            4-fold revolver stop.
            PSF - Pneumatic clamping device for wings
            against the side stops.
            Working height adjustable from 900 - 1000 mm.
            Please also specify whether felt, sliding or brushes
            perform as a requirement.

            Item 1.1: Item no. : 0500000
            Bracket matched to customer punch/-
            scissors.For installing a customer-supplied
            Fitting punch or fitting scissors (other brand)
            at the wing assembly table. Please specify make when ordering !!!

            Note: A Somatec punch is attached to this demonstration table.
            This can be purchased as an option.
            Otherwise, the punch must be provided by the customer (by the hardware
            manufacturer)

            Item 1.2: Item no. : 6309
            RU-BM-... Siegenia fitting discontinued
            Alternatively also adjustable to other fittings!

            Item 1.3: Item no. : 0710000
            RU-SBL3000/30 free-standing fitting bearing,
            length 3100 mm, depth 1250 mm, height 2050 mm,

            stand frame on the front without supports,
            30 compartments, 10 pieces each in a row
            Divided partitions and a continuous shelf
            top, size of the compartments: width 280 mm, height 150 mm.

            -----------------------------------------------------
            Total price in this version: on request!

            See attached video and PDF brochure.

            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Fitting centre Powasert Drehschrauber mit Zufuerung


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6290 · Fitting centre

          Powasert - Drehschrauber mit Zufuerung - - neu -

          Technical details
          - ︱Working width - mm︱ -
            -
            Working width - mm
            -


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Fitting centre RUCHSER Montagelinie Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6388 · Fitting centre

          RUCHSER - Montagelinie Video - - neu -

          Technical details
          Number of machnines - ︱Loading meters, approx. - ︱Total weight, approx. -
          Assembly line consisting of: Item 1.0 / 0610005 RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2.0 / 10603200 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3.0 / 614-601 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155 Warranty 12 months excluding wearing parts Documentation 1-fold digital in German including CE declaration of conformity Item 4.0 / 10229018 Vacuum lifter with integrated electric chain hoist 90° / 200 kg for vertical and horizontal transport of flat, sealed glass panes. Vacuum generation with pneumatic ejector Push-off device for quickly releasing the plates and releasing the load only by double actuation (2 buttons) Safety vacuum storage including check valve is required by law. Audible safety warning device and vacuum pressure gauge with red/green area Energy saving device for vacuum generation and stroke safety circuit Pneumatic swivel unit with swivel range 90° Load capacity: 0-200 kg Lifting speed: 0-10m/min continuously using Frequency converter Lifting height: approx. 1.8m Operating voltage: 1x230V/50Hz Operating pressure: at least 6-7 bar of filtered compressed air Air consumption: approx. 1NI/sec. Weight: approx. 75 kg Painted in RAL 1018 zinc yellow Recording with a longitudinal beam and 4 pieces Suction plates D=290 mm Adjustment range, external dimensions of the suction plate Vertical 600-1000 mm Horizontally 800-1000 mm Comfort control The comfort control includes stepless raising and lowering through a frequency converter (required for gentle hanging up), All commands for the hoist and the vacuum lifter are in one common control unit - Special handling switch - housed. This makes it easier to operate the system and manage it Load possible in one-hand operation. Assembly - slewing crane and instruction on wing assembly table with aluminum screw machine Price on request! Packaging Price on request! transport Price on request! (Technical description according to manufacturer - no guarantee!)
            Number of machnines -
            Loading meters, approx. -
            Total weight, approx. -
            Description :
            Assembly line consisting of:

            Item 1.0 / 0610005
            RU-CBM 4000 work table
            with running rail extended by 500mm for additional assembly
            an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD
            with RU-SH special screwdriver, support table
            Length 4000 mm, width 1400 mm, inclination of the working platform
            manually adjustable. Holder for fitting scissors or fitting punch.
            16 pieces of swiveling counter-holders for hanging the wings, completely
            pneumatic
            Foldable for unhindered movement of the wings on the table surface.
            Device for scanning the sash fitting length for constant and
            variable/central gear seat for already drilled wings, colored
            Dimension recognition of the fittings.
            RU-SH, special screwdriver with pneumatic depth switch on carriage
            mounted, safety control, pneumatic height adjustment,
            Screw feeder with automatic shutdown of the filling container
            (Manual insertion for a second screw length on the special screwdriver upon
            request).

            RA-8, turret stop for 8 screw levels mounted on the carriage.

            RA-4, turret stop for 4 different wing widths
            Swivel table mounted.
            Pneumatic wing measurement sensing. operated, scanning range up to 2500mm
            simultaneous clamping of the scanning.

            PSF - Pneumatic tensioning device for sashes.
            Working height adjustable from 900 - 1000 mm.
            Support table covered with felt. Running rail extended to the left by 800 mm.

            Item 1.1 / 5035-1
            Pneumatic swivel device of the work surface with foot valve

            Item 1.2 / 0500000
            Holder matched to customer punch/scissors.
            For mounting a hardware punch provided by the customer or
            Fitting shears (third-party manufacturer) on the sash assembly table.

            Please specify make when ordering!!!

            Item 1.3 / 5597-7
            Driving device for RU-CBM on semicircular rails.
            The castors are on the left and right of the base frame
            of the table mounted.

            Item 1.4 / 6354-6
            3 double meters of semicircular rails 30 x 10 mm.
            Item 1.5 / 0730000
            RU-SBL3000/40 free-standing fitting bearing,
            Length 3100 mm, depth 1250 mm, height 2200 mm,
            Stand frame on the front without supports,
            40 compartments, divided into 10 compartments in a row by dividers
            and a continuous shelf at the top,
            Compartment size: width 280 mm, height 150 mm.

            Item 2.0 / 10603200

            RU-CSA-SMB aluminum holder screwing machine with automatic
            Screw feeding and manual feeding of the aluminum holders from one
            traveling box with pneumatic positioning device,
            Screwdriver with depth cut-off with 4-fold turret stop.
            Pneumatic adjustment device in the y direction against 2 pieces 6-fold
            Revolver attacks. Feed container for manual feeding of rotary holders
            or clip holder in square shape 18.5 x 18.5.
            The holder is manually pushed into a channel in the box and with
            positioned in front of the screwdriver mouthpiece using a pneumatically
            operated slide.
            Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm.

            Item 3.0 / 614-601
            RU-S48-A6-350 column slewing crane
            for chain hoist, with 6 m aluminum boom
            Version with column, smooth-running boom
            and sliding chassis for swivel and trolley travel
            manually by pulling and pushing the load.
            Projection 6 m
            Construction height 4,461 m
            Lower edge of boom 3.722 m (top edge of boom 3.9 m)
            Swivel range max. 270°
            Painting of the steel construction in RAL 7035
            The base plate is attached to the on-site hall floor
            At least 250 mm thick.
            Designed, of course, according to the valid STANDARD EN 13155
            Warranty 12 months excluding wearing parts
            Documentation 1-fold digital in German including CE declaration of conformity

            Item 4.0 / 10229018
            Vacuum lifter with integrated electric chain hoist 90° / 200 kg
            for vertical and horizontal transport of flat, sealed glass panes.
            Vacuum generation with pneumatic ejector
            Push-off device for quickly releasing the plates and releasing the load
            only by double actuation (2 buttons)
            Safety vacuum storage including check valve is required by law.
            Audible safety warning device and vacuum pressure gauge
            with red/green area
            Energy saving device for vacuum generation and stroke safety circuit
            Pneumatic swivel unit with swivel range 90°
            Load capacity: 0-200 kg
            Lifting speed: 0-10m/min continuously using
            Frequency converter
            Lifting height: approx. 1.8m
            Operating voltage: 1x230V/50Hz
            Operating pressure: at least 6-7 bar of filtered compressed air
            Air consumption: approx. 1NI/sec.
            Weight: approx. 75 kg
            Painted in RAL 1018 zinc yellow
            Recording with a longitudinal beam and 4 pieces
            Suction plates D=290 mm
            Adjustment range, external dimensions of the suction plate
            Vertical 600-1000 mm
            Horizontally 800-1000 mm

            Comfort control
            The comfort control includes stepless raising and lowering
            through a frequency converter (required for gentle hanging up),
            All commands for the hoist and the vacuum lifter are in one
            common control unit
            - Special handling switch - housed.
            This makes it easier to operate the system and manage it
            Load possible in one-hand operation.

            Assembly - slewing crane and instruction on wing assembly table with aluminum
            screw machine
            Price on request!

            Packaging
            Price on request!

            transport
            Price on request!

            (Technical description according to manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Fitting centre RUCHSER RU-BM 2500


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6843 · Fitting centre

          RUCHSER - RU-BM 2500 - - gebraucht -

          Technical details
          0 ja, 30 Faecher ︱Working width 2250 mm︱0 nein
          Ruchser RU-BM 2500 ---------------------- Fitting table with fitting shelf 30 compartments with olive drilling rig Uniqick 2000 screw magazine with feed to the hand screwdriver Selling ex location, can still be viewed in use! (technical information according to the manufacturer - without guarantee!)
            0 ja, 30 Faecher
            Working width 2250 mm
            0 nein
            Description :
            Ruchser RU-BM 2500
            ----------------------
            Fitting table with fitting shelf 30 compartments
            with olive drilling rig

            Uniqick 2000 screw magazine with feed to the hand screwdriver

            Selling ex location, can still be viewed in use!

            (technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 2.500 €
          Datasheet
          Request / Contact
          used Window production: wood Fitting centre RUCHSER RU-BM 2500


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6824 · Fitting centre

          RUCHSER - RU-BM 2500 - - gebraucht -

          Technical details
          0 ja ︱Working width 2500 mm︱0 nein ︱Dimensions (L/W/H) 3200 x 2000 x 2160 mm︱
          Ruchser RU-BM-2500 fitting center with fitting storage, mobile ------------------------------------------------------ Pivoting stops Pneumatic magazine screwdriver Fittings shelf 30 compartments with lower storage compartments Support table covered with felt Special screwdriver Screw feeder fitting punch Mobile table Wood thickness 90 mm possible. Customer processed Siegenai Titan AF fitting. Can be adjusted to other fittings. Overall dimensions with shelf approx.: 3200 mm x 2000 mm x 2160 mm Dimensions of work table approx: length 2520 mm, depth 1,370 mm (Technical information according to manufacturer - no guarantee!)
            0 ja
            Working width 2500 mm
            0 nein
            Dimensions (L/W/H) 3200 x 2000 x 2160 mm
            Description :
            Ruchser RU-BM-2500 fitting center with fitting storage, mobile
            ------------------------------------------------------
            Pivoting stops
            Pneumatic magazine screwdriver
            Fittings shelf 30 compartments with lower storage compartments
            Support table covered with felt
            Special screwdriver
            Screw feeder
            fitting punch
            Mobile table
            Wood thickness 90 mm possible.

            Customer processed Siegenai Titan AF fitting.
            Can be adjusted to other fittings.

            Overall dimensions with shelf approx.: 3200 mm x 2000 mm x 2160 mm
            Dimensions of work table approx: length 2520 mm, depth 1,370 mm

            (Technical information according to manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Frame press

          used Window production: wood Frame press S&S Bavaria 2000 L - Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6794 · Frame press

          S&S - Bavaria 2000 L - Video - - Vorführpresse -

          Technical details
          Working width 4500 mm︱Working height 3000 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5600x1350x3550 mm︱Weight 3000 kg︱
          S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore none vertical positioning of the horizontal printing cylinders necessary, avoiding cylinder collisions. Abutments below in several positions on each most favorable insertion height adjustable. 3 KW compact hydraulic system with integrated Control block, variable pressure control from 20 - 120 bar, manometer Control via push button with separate control circuits for the vertical and horizontal press cylinders on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke on Adjusted working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: length x height = 4,500 mm x 2,750 mm A notice: actual working size: 4,500 x 3,000 mm (length x height= Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height) Item 0000127 ------------------------ Press height modification 2750/3000 mm a The machine is supplied with a 3,000 mm high pressure bar The cylinder attachment and the positions of the lower press corners however, correspond to the version with a press height of 2,750 mm. By installing 3 pieces of 300 mm long piston rod extensions the max. pressing height can be increased to 3,000 mm. Using the tools provided, it is possible to convert the Machine possible within approx. 10 minutes. Insertion heights: - lower insertion height for sashes with width <550 mm; approx. 1280 mm - Insertion height upper edge of upper horizontal frame wood up to pressing height 2,750mm; approx. 1,620 mm - Insertion height upper edge of upper horizontal frame wood pressing height >2,750mm; approx. 1,920 mm (piston rod extension installed) Scope of delivery: 1 piece support plate 3 piston rod extensions 300 mm 1 open-end wrench size 30 1 ratchet with socket wrench size. 24 1 piece holder for piston rod extensions and tool Hints: - The height is corrected for machines with a positioning function by parameter switching. Operation of the machine with the built-in piston rod extensions is replaced by another wallpaper displayed. - Total height of the machine approx. 3,400 mm Item 00001147 ------------------------ 1 medium pressure bar complete with pressure cylinder, Pressure hose and shut-off valve up to 3,000 mm high Item 00000471 ------------------------ Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 00000112 ----------------------- infinitely height-adjustable transverse pressure device, complete with pressure cylinder and abutment, Throttle and shut-off valve Item 00000481 ------------------------ Individual pressure control for transverse pressure device Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 000000391 --------------------------------------- Shut-off valve on the 3rd vertical cylinder Item 00000391 ----------------------- Shut-off valve on the upper horizontal cylinder Item 00001005 ------------------------ 3 x inclined window controls for vertical cylinders Item 00000302 ----------------------- 3x pendulum pressure plates attachable for pressing up to 60 degrees Item 00000631 ----------------------- double pendulum pressure plate for pointed windows (triangle) Item 00000113 ----------------------- 2 x extension for pendulum pressure plate for pointed windows (triangle) Item 00000057 ----------------------- Intermediate allowance for small dimension pressing for bridging the 1st pressure bar, including shut-off valve on the 1st vertical cylinder Item 00000100 ----------------------- Motorized width adjustment with digital display Item 00001001 ----------------------- Machine equipped for pressing of "tenons + slots" and additional pressing cycle for pressing "dowel connection" or "Plugtec", changeable via selector switch on the control cabinet Item 00001003 ----------------------- Basic equipment for counter profiles Item 00000632 ----------------------- Electronic pressure preselection device For 4 different, permanently programmed pressure levels (can be changed at any time), and an additional freely selectable one Pressure level directly on the control panel Item 00001002 ----------------------- 6x printing unit support and printing plate depth 120 mm Item 00099000 ----------------------- all pressure plates and abutments covered with plastic --------------------------------- Total price in the above version: on request! Options with additional prices: ----------------------- Item 00001004 ----------------------- Counter profiles, price per piece: 260.00 euros Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
            Working width 4500 mm
            Working height 3000 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5600x1350x3550 mm
            Weight 3000 kg
            Description :
            S&S frame press Bavaria 2000 L
            ---------------------------------

            With automatic pressing cycle + manual control
            for corner connections tenon + slots and dowel connection / mortised tenon,
            can be changed using a selector switch on the control cabinet.
            With basic equipment for the optional use of counter profiles if the sash is on
            loose part to be folded over.

            CE version
            Basic machine in the strongest welded frame,
            with thick-walled special hollow profiles.
            Guideways of the pressure bars for the press corners
            in a low-abrasion finish.

            Fast, smooth, manual width adjustment
            by ball-bearing carriage, fixation in 50 mm
            Hole grid, optional motorized width adjustment with
            with hydraulic clamping (surcharge).

            Height adjustment and pressing by long-stroke cylinder
            in one work cycle. Right-hand press corners with
            integrated horizontal cylinders, therefore none
            vertical positioning of the horizontal printing cylinders
            necessary, avoiding cylinder collisions.
            Abutments below in several positions on each
            most favorable insertion height adjustable.

            3 KW compact hydraulic system with integrated
            Control block, variable pressure control
            from 20 - 120 bar, manometer

            Control via push button with separate control circuits
            for the vertical and horizontal press cylinders
            on a freely movable control panel.

            2 vertical press cylinders, double-acting, stroke on
            Adjusted working height, piston diameter 60 mm
            Pressure force per cylinder max. 2100 kg
            2 horizontal press cylinders, double-acting,
            80 mm stroke, piston diameter 40 mm
            Pressure force per cylinder max. 1250 kg
            Abutment and pressure plate depth 100 mm

            Control cabinet on the machine base on the left, 400 volts, 50 Hz
            Machine with ready-to-connect plug 16 A

            Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey

            Working size: length x height = 4,500 mm x 2,750 mm
            A notice:
            actual working size: 4,500 x 3,000 mm (length x height=
            Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height)

            Item 0000127
            ------------------------
            Press height modification 2750/3000 mm a
            The machine is supplied with a 3,000 mm high pressure bar
            The cylinder attachment and the positions of the lower press corners
            however, correspond to the version with a press height of 2,750 mm.
            By installing 3 pieces of 300 mm long piston rod extensions
            the max. pressing height can be increased to 3,000 mm.
            Using the tools provided, it is possible to convert the
            Machine possible within approx. 10 minutes.

            Insertion heights:
            - lower insertion height for sashes with width <550 mm; approx. 1280 mm
            - Insertion height upper edge of upper horizontal frame wood up to pressing
            height
            2,750mm; approx. 1,620 mm
            - Insertion height upper edge of upper horizontal frame wood pressing height
            >2,750mm; approx. 1,920 mm (piston rod extension installed)

            Scope of delivery:
            1 piece support plate
            3 piston rod extensions 300 mm
            1 open-end wrench size 30
            1 ratchet with socket wrench size. 24
            1 piece holder for piston rod extensions and tool

            Hints:
            - The height is corrected for machines with a positioning function
            by parameter switching. Operation of the machine with the
            built-in piston rod extensions is replaced by another
            wallpaper displayed.

            - Total height of the machine approx. 3,400 mm

            Item 00001147
            ------------------------
            1 medium pressure bar complete with pressure cylinder,
            Pressure hose and shut-off valve up to 3,000 mm high

            Item 00000471
            ------------------------
            Individual pressure control for medium pressure bar,
            Pressure control range up to max. 100 bar
            (For pressing crossbar windows)

            Item 00000112
            -----------------------
            infinitely height-adjustable transverse pressure device,
            complete with pressure cylinder and abutment,
            Throttle and shut-off valve

            Item 00000481
            ------------------------
            Individual pressure control for transverse pressure device
            Pressure control range up to max. 100 bar
            (For pressing crossbar windows)

            Item 000000391
            ---------------------------------------
            Shut-off valve on the 3rd vertical cylinder

            Item 00000391
            -----------------------
            Shut-off valve on the upper horizontal cylinder


            Item 00001005
            ------------------------
            3 x inclined window controls for vertical cylinders

            Item 00000302
            -----------------------
            3x pendulum pressure plates attachable
            for pressing up to 60 degrees

            Item 00000631
            -----------------------
            double pendulum pressure plate
            for pointed windows (triangle)

            Item 00000113
            -----------------------
            2 x extension for pendulum pressure plate
            for pointed windows (triangle)

            Item 00000057
            -----------------------
            Intermediate allowance for small dimension pressing
            for bridging the 1st pressure bar,
            including shut-off valve on the 1st vertical cylinder

            Item 00000100
            -----------------------
            Motorized width adjustment with digital display

            Item 00001001
            -----------------------
            Machine equipped for pressing
            of "tenons + slots" and additional pressing cycle
            for pressing "dowel connection" or
            "Plugtec", changeable via selector switch on the control cabinet

            Item 00001003
            -----------------------
            Basic equipment for counter profiles

            Item 00000632
            -----------------------
            Electronic pressure preselection device
            For 4 different, permanently programmed pressure levels
            (can be changed at any time), and an additional freely selectable one
            Pressure level directly on the control panel

            Item 00001002
            -----------------------
            6x printing unit support and printing plate depth 120 mm

            Item 00099000
            -----------------------
            all pressure plates and abutments covered with plastic

            ---------------------------------
            Total price in the above version: on request!


            Options with additional prices:
            -----------------------

            Item 00001004
            -----------------------
            Counter profiles, price per piece: 260.00 euros

            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Illustrations may be dated
            Deviate from the original, prices net, plus VAT (domestic))


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6792 · Frame press

          S&S - RP 2000 - - Vorführmaschine -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5300 x 1250 x 3330 mm︱
          S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: -------------------------------------- Article 00000374 1.00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article 00000047 1.00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000038 1.00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article 00000048 1.00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000039 1.00 pc Shut-off valve on the 3rd vertical cylinder Article 00000039 1.00 pc Shut-off valve on the upper horizontal cylinder Article 00000050 1.00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article 00003117 1.00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item 00099000 All pressure plates and abutments covered with plastic Article 00000049 1.00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article 00000063 1.00 pc double pendulum pressure plate for pointed windows (triangle) -------------------------------------- Total price in the above version ex works: On request! -------------------------------------- Options: Article 00000042 1.00 pc Machine that can be dismantled i.e. H. Pressure bar on pallet -------------------------------------- Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5300 x 1250 x 3330 mm
            Description :
            S&S frame press type RP 2000,
            -----------------------------
            C E - version
            Stable frame welded construction made of thick-walled special hollow profiles,
            Sliding carriage and pressure bar with 50 mm hole pattern.
            Continuous abutment on the left for width compression, lower abutment
            in two levels.
            Vertical press cylinder on special pressure bar with one-hand quick adjustment
            with weight compensation in the 50 mm hole pattern, height-adjustable, long
            Sliding carriages ensure the
            permanent absorption of high pressing forces.
            Fast, smooth width adjustment with ball-bearing carriage
            Central locking, fixation in 50 mm hole pattern.
            Upper horizontal press cylinder infinitely adjustable in height and with
            Equipped with counterbalance.
            Lower horizontal press cylinder with center holes for the two
            Abutment levels, with weight compensation.
            Abutment and pressure plate depth 100 mm
            Printing plate and support width 130 mm
            Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d =
            50 mm, stroke 120 mm double-acting, with counterweight and
            One-hand quick adjustment, 2 pieces
            Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with
            weight balancing; 2 manual control valves,
            Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400
            to 2400 kg
            pressure
            vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage.
            Complete with electrical connection.
            Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey

            Working size: 4000mm x 2600mm (length x height)
            Required space: 5300 x 1250 x 3330 mm (L x W x H)

            Machine including the following options:
            --------------------------------------

            Article 00000374 1.00 pc
            Medium pressure bar with pressure cylinder
            double-acting, weight compensation,
            pressure hose and shut-off valve
            up to 2600 mm high

            Article 00000047 1.00 pc
            Individual pressure control for medium pressure bar,
            Pressure control range up to max. 100 bar
            (for pressing crossbar windows)

            Article 00000038 1.00 pc
            Cross printing device complete with pressure cylinder
            double-acting, weight compensation, pressure hose
            and shut-off valve
            There is no weight compensation on the lower horizontal cylinder

            Article 00000048 1.00 pc
            Individual pressure control for transverse pressure device,
            Pressure control range up to max. 100 bar
            (for pressing crossbar windows)

            Article 00000039 1.00 pc
            Shut-off valve on the 3rd vertical cylinder

            Article 00000039 1.00 pc
            Shut-off valve on the upper horizontal cylinder

            Article 00000050 1.00 pc
            Width allowance for compression
            of small frames to bridge the
            1st pressure beam, including shut-off valve on the 1st vertical cylinder

            Article 00003117 1.00 pc
            Basic equipment for counter profiles
            The space required in height increases by 100 mm

            Item 00099000
            All pressure plates and abutments
            covered with plastic

            Article 00000049 1.00 pc
            Triangle studio window pressing device
            consisting of: locking device of
            Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates

            Article 00000063 1.00 pc
            double pendulum pressure plate
            for pointed windows (triangle)

            --------------------------------------

            Total price in the above version ex works: On request!

            --------------------------------------
            Options:
            Article 00000042 1.00 pc
            Machine that can be dismantled
            i.e. H. Pressure bar on pallet
            --------------------------------------

            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Illustrations may be dated
            Deviate from the original, prices net, plus VAT (domestic))


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Multipress Lochplattenpresse


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5956 · Frame press

          S&S - Multipress Lochplattenpresse - - neu -

          Technical details
          Working width 3500 mm︱Working height 2650 mm︱Number of cylinders nach Wahl St.︱
            Working width 3500 mm
            Working height 2650 mm
            Number of cylinders nach Wahl St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5845 · Frame press

          S&S - RP 2000 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S T 35


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6030 · Frame press

          S&S - T 35 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
          Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.
            Description :
            Stable frame welded construction of thick-walled
            Special hollow profiles , sliding table and pressure beam with
            50 mm hole pattern .

            On the left side continuous abutment for grouting the wide ,
            lower abutment in 2 levels.

            Vertical pressing cylinder on specialty bar with one-
            quick adjustment with weight compensation in the 50 mm hole pattern
            adjustable in height. Long sliding table ensure the
            continuous recording of high jacking forces .

            Fast, smooth width adjustment with ball bearing
            Carriage with central fixation in 50 mm hole pattern.

            Upper horizontal press cylinder infinitely adjustable in height and
            equipped with counterbalance .

            Lower horizontal pressing cylinders with bore for
            two abutments levels without weight compensation .

            Abutment and pressure plate depth 100 mm

            Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders
            d = 60 mm, stroke 120 mm, single-acting, with counterbalance and
            One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm
            stroke,
            120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves ,
            Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550
            4200 kg compression force vertically. With 3 kW three-phase motor for 400
            volts , 50 Hz
            Operating voltage.

            Complete with electrical connection .

            Painting RAL 7035 anthracite gray with light gray RAL 7016 .

            (technical details according to manufacturer - without guarantee ! )

            The detailed technical description can be found in the attached pdf file


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Super-Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6121 · Frame press

          S&S - Super-Video - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Bavaria 2000 L  -Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6496 · Frame press

          S&S - Bavaria 2000 L -Video - - neu -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 5 St.︱weight 2000 kg︱Dimensions (L/W/H) 5550x1300x3000 mm︱
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 5 St.
            weight 2000 kg
            Dimensions (L/W/H) 5550x1300x3000 mm
            Description :



        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press SCHAFBERGER + SPROEDHUBER RP 1200


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6803 · Frame press

          SCHAFBERGER + SPROEDHUBER - RP 1200 - - gebraucht -

          Technical details
          Working width 3550 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱
          S+S hydraulic frame press RP 1200 ------------------------------------- Working width 3,550 mm Working height 2,250 mm ------------------------------------- with medium pressure beam ------------------------------------- still in use ------------------------------------- Technical information according to the manufacturer - without guarantee!)
            Working width 3550 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            Description :
            S+S hydraulic frame press RP 1200
            -------------------------------------
            Working width 3,550 mm
            Working height 2,250 mm
            -------------------------------------
            with medium pressure beam
            -------------------------------------
            still in use
            -------------------------------------

            Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 2.000 €
          Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Speedy Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2719 · Frame press

          HESS - Speedy Video - - gebraucht -

          Technical details
          Working width 3550 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱loading dimensions L x W x H 4500 x 900 x 2600 mm︱
          Hess Speedy frame press -------------------------------------- Press will be checekd Insertion dimension / pressing length max. 3,550 mm Insertion dimension / pressing height max. 2,250 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Control for studio window gluing 2 pendulum pressure plates 45 degrees Machine dimensions W=4500 mm, D=900 mm, H=2600 mm Weight approx. 1800 kg Photo and video not original, shows press of same type. (technical data according to the manufacturer - no guarantee!)
            Working width 3550 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            loading dimensions L x W x H 4500 x 900 x 2600 mm
            Description :
            Hess Speedy frame press
            --------------------------------------
            Press will be checekd

            Insertion dimension / pressing length max. 3,550 mm
            Insertion dimension / pressing height max. 2,250 mm


            Sliding carriage for width adjustment locking in 50 mm
            Double hole grid system

            Electric height adjustment of the long-stroke cylinders (hydraulic)

            Insertion height of the abutment plates can be preselected in 4 positions

            3 vertical printing cylinders stroke 1000 mm
            Pressure force per cylinder 2000 kN / 20000 N

            2 horizontal printing cylinders stroke 80 mm
            Pressure force per cylinder 1250 kN / 12500 N

            Printing plate depth 100 mm width 140 mm

            Grid for cylinder fixation/rear bearing 50 mm

            Medium pressure beam with shut-off valve

            Final pressure switch-off and pressure control

            Control and pressing process in touch button operation

            Adjustable pressing pressure min. 25 – max. 160 bar

            Electrical connection 2.2 kW / 400V

            Control for studio window gluing

            2 pendulum pressure plates 45 degrees

            Machine dimensions W=4500 mm, D=900 mm, H=2600 mm
            Weight approx. 1800 kg

            Photo and video not original, shows press of same type.

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Quickstep_Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2701 · Frame press

          HESS - Quickstep_Video - - gebraucht - Siemens S7-1200

          Technical details
          Working width 3500 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱control Siemens S7-1200
          #2701 Hess Quickstep frame press -------------------------------------- Technical data summary (please inquire about any additional accessories included) -------------------------------------- Generally -------------------------------------- Working width: 3500 mm Working height: 2250 mm Total power requirement: 3 kW Installation dimensions: 4500x980x2610 mm Loading dimensions: 4500 x 980 x 2610 mm Machine weight, approx.: 2000 kg Characteristics: -------------------------------------- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long-stroke cylinder) > Horizontal adjustment type: electrical > 1 medium pressure bar > Printing plate depth 100mm width 140mm > 3 pcs. pendulum pressure plates > 1 piece small parts allowance Other features -------------------------------------- Opto-electronics, i.e. fully automatic measurement and setting, horizontal Siemens S7-1200 control (technical information according to the manufacturer - no guarantee!) Pictures and video show the original press stock number 2701.
            Working width 3500 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            control Siemens S7-1200
            Description :
            #2701 Hess Quickstep frame press
            --------------------------------------

            Technical data summary
            (please inquire about any additional accessories included)
            --------------------------------------

            Generally
            --------------------------------------
            Working width: 3500 mm
            Working height: 2250 mm
            Total power requirement: 3 kW
            Installation dimensions: 4500x980x2610 mm
            Loading dimensions: 4500 x 980 x 2610 mm
            Machine weight, approx.: 2000 kg

            Characteristics:
            --------------------------------------
            > hydraulic: yes
            > Number of vertical press cylinders: 3
            > Number of horizontal press cylinders: 2
            > Vertical adjustment type: electric (long-stroke cylinder)
            > Horizontal adjustment type: electrical
            > 1 medium pressure bar
            > Printing plate depth 100mm width 140mm
            > 3 pcs. pendulum pressure plates
            > 1 piece small parts allowance

            Other features
            --------------------------------------
            Opto-electronics, i.e. fully automatic measurement
            and setting, horizontal

            Siemens S7-1200 control

            (technical information according to the manufacturer - no guarantee!)

            Pictures and video show the original press stock number 2701.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Speedy, 2 Mitteldruckbalken


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2730 · Frame press

          HESS - Speedy, 2 Mitteldruckbalken - - gebraucht -

          Technical details
          Working width 3050 mm︱Working height 2050 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 3970x950x2400 mm︱
          Hess Speedy frame press with 2 medium pressure beams! -------------------------------------- Insertion dimension / pressing length max. 3,050 mm Insertion dimension / pressing height max. 2,050 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 4 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 3.0 kW / 400V Machine dimensions W=3970 mm, D=950 mm, H=2400 mm Weight approx. 1680 kg Machine is currently being checked - picture not original, shows same model. Video shows press from our archive (technical data according to the manufacturer - no guarantee!)
            Working width 3050 mm
            Working height 2050 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 3970x950x2400 mm
            Description :
            Hess Speedy frame press with 2 medium pressure beams!
            --------------------------------------

            Insertion dimension / pressing length max. 3,050 mm
            Insertion dimension / pressing height max. 2,050 mm


            Sliding carriage for width adjustment locking in 50 mm
            Double hole grid system

            Electric height adjustment of the long-stroke cylinders (hydraulic)

            Insertion height of the abutment plates can be preselected in 4 positions

            4 vertical printing cylinders stroke 1000 mm
            Pressure force per cylinder 2000 kN / 20000 N

            2 horizontal printing cylinders stroke 80 mm

            Pressure force per cylinder 1250 kN / 12500 N

            Grid for cylinder fixation/rear bearing 50 mm

            Medium pressure beam with shut-off valve

            Final pressure switch-off and pressure control

            Control and pressing process in touch button operation

            Adjustable pressing pressure min. 25 – max. 160 bar

            Electrical connection 3.0 kW / 400V

            Machine dimensions W=3970 mm, D=950 mm, H=2400 mm
            Weight approx. 1680 kg

            Machine is currently being checked - picture not original, shows same model.
            Video shows press from our archive

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press CASOLIN Euro


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6821 · Frame press

          CASOLIN - Euro - - 2010 -

          Technical details
          Working width 6000 mm︱Working height 3000 mm︱Number of cylinders 4 St.︱loading dimensions L x W x H 7.175 x 1.600 x 3.790 mm︱weight 3700 kg︱
          Casolin Euro ------------------------- HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. "EURO" Frame press in an extremely stable steel construction. The machine also allows the pressing of already milled wing and frame parts. Working dimensions: 6000mm x 3000mm Installation dimensions: Total length: approx. 7,175 mm Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed maximum pressing height above) = 4,130 mm Loading dimensions: Length: approx. 7,175 mm Height: approx. 3,790 mm Weight: approx. 3,700 kg (technical data according to the manufacturer - no guarantee!)
            Working width 6000 mm
            Working height 3000 mm
            Number of cylinders 4 St.
            loading dimensions L x W x H 7.175 x 1.600 x 3.790 mm
            weight 3700 kg
            Description :
            Casolin Euro
            -------------------------
            HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. "EURO"

            Frame press in an extremely stable steel construction. The machine also allows
            the pressing of already milled wing and frame parts.

            Working dimensions: 6000mm x 3000mm

            Installation dimensions:
            Total length: approx. 7,175 mm
            Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed
            maximum pressing height above) = 4,130 mm

            Loading dimensions:
            Length: approx. 7,175 mm
            Height: approx. 3,790 mm
            Weight: approx. 3,700 kg

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 20.000 €
          Datasheet
          Request / Contact
          used Window production: wood Frame press MAWEG Euronova Qickomat


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6822 · Frame press

          MAWEG - Euronova Qickomat - - 1996 -

          Technical details
          Working width 3648 mm︱Working height 2485 mm︱Number of cylinders 6 St.︱
          Maweg Euronova Quickomat frame press ---------------------------- with automatic measurement adjustment. Cylinder max. opened (maximum working dimensions) W 3,648mm x H 2,485mm Total length: 4,720mm + 400mm control unit Total height: 3,550 mm (technical information according to the manufacturer - no guarantee!)
            Working width 3648 mm
            Working height 2485 mm
            Number of cylinders 6 St.
            Description :
            Maweg Euronova Quickomat frame press
            ----------------------------
            with automatic measurement adjustment.

            Cylinder max. opened (maximum working dimensions)
            W 3,648mm x H 2,485mm

            Total length: 4,720mm + 400mm control unit
            Total height: 3,550 mm

            (technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press MAWEG HILDEBRAND Euro-Z


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6810 · Frame press

          MAWEG HILDEBRAND - Euro-Z - - 1990 -

          Technical details
          Working width 3250 mm︱Working height 2300 mm︱Number of cylinders 7 St.︱Dimensions (L/W/H) 4400 x 1050 x 3200 mm︱loading dimensions L x W x H 4400 x 1050 x 2950 mm︱
          Maweg Hildebrand frame press EURO-Z -------------------------------------- Press with 2 medium pressure beams! External dimensions approx.: Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm Loading height: 2,950 mm Pressing dimensions: length = 3,250 mm, height = 2,300 mm Printing plates: depth=100 mm, width=120 mm Selling ex location as stated. You can see the press in use until around the end of January 2024. (technical information according to the manufacturer - no guarantee!)
            Working width 3250 mm
            Working height 2300 mm
            Number of cylinders 7 St.
            Dimensions (L/W/H) 4400 x 1050 x 3200 mm
            loading dimensions L x W x H 4400 x 1050 x 2950 mm
            Description :
            Maweg Hildebrand frame press EURO-Z
            --------------------------------------
            Press with 2 medium pressure beams!

            External dimensions approx.:
            Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm
            Loading height: 2,950 mm

            Pressing dimensions: length = 3,250 mm, height = 2,300 mm
            Printing plates: depth=100 mm, width=120 mm

            Selling ex location as stated.
            You can see the press in use until around the end of January 2024.

            (technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          RUCHSER - POWASERT -