Paint Spraying Unit
Machinelist: Paint Spraying Unit
Paint Spraying Unit
- Knops Werkzeugmaschinen
- Konrad-Zuse-Straße 5
- 40789 Monheim
- Deutschland
-
02173 - 39494-0
02173 - 39494-29 -
maschinen@knops.de
www.knops.de
#1022-E05757 · Paint Spraying Unit
ABB - IRB 5500 - - 2011 - ABB IRC5P
Technical details
Used Gantry-Type Painting System, consisting of: 2 off painting robots ABB IRB 5500 with IRC5P control and RB1000 high-speed rotary atomizer, which can travel vertical on a 5m rail. These are mounted on a travelling gantry, which is running on approx. 74 m crane rails. This gives the possibility to paint very large workpieces. The robots could of course also be mounted on one fixed base. There is a higher-level system control, which is necessary for security reasons to operate the portal (gantry). The gantry is integrated into a ventilation concept in the hall. By this arrangement the operating costs have been reduced. The gantry is no longer in use: the surfaces, the tanks are only technically cleaned, if necessary, so that there is no longer any danger from the fillings runs out. Supply lines were cut open for residual emptying, tanks were roughly cleaned and left open to dry out. Including spare parts package. The robots have been used very little, approx. 9400 h operating hours. Including scanning system of the workpieces. The purchasing price of the complete Gantry-Type Painting System was 2.400.000 Euros (when it was new).
- Leyendecker & Hollmann GmbH
- Giesenheide 18
- 40724 Hilden
- Deutschland
-
+49 (2103) 28097-0
+49 (2103) 28097-99 -
info@LHmachine.com
www.LHmachine.com
#1083-03292 · Paint Spraying Unit
DURST - D-RTA D-LTA - - 2022 -
Technical details
Painting and drying system with cleaning and drying cabin Painting and drying system type D-LTA: - total internal length: 8000 mm - clear width inside: 8000 mm - clearance height inside: 6100 (UK running rail) - motor power: 2 x 15 kW - volume flow full load: 30000 m³/h - max. dimensions of the workpiece: 5500 x 5500 x 6000 mm Cleaning and drying cabin type D-RTA: - total internal length: 8000 mm - clear width inside: 8000 mm - clearance height inside: 6100 (UK running rail) - motor power: 11 kW - volume flow full load: 30000 m³/h - max. dimensions of the workpiece: 5500 x 5500 x 6000 mm Including paint mixing room (LMR) and extraction system
- Kemmerich Werkzeugmaschinen
- Im Rottfeld 1a
- 40789 Monheim am Rhein
- Deutschland
-
+49 2173 207474
+49 2173 207473 -
info@kemmerich.biz
www.kemmerich.biz
#1020-18275 · Paint Spraying Unit
EISENMANN - - - 1988 - Eisenmann
Technical details
Painting plant for cathodic dip painting (KTL) (for e.g. stamped parts, bows, roof components, bumpers for cars, larger axle components etc) - Zones pretreatment / treatment: (please also see the schematic plan) o degreasing o phosphating o activating o corresponding rinsing zones o KTL (Painting) o ultrafiltration sink o demineralization sink - Ofen & thermal afterburning - Sewage system - Demineralized water system as ion exchange system - Technology: cycle lifting system - Area to be coated: 30 m² - Daily output: approx. 300 product carriers (3 shifts) - Weight of product carriers: max. 360 kg - Size of the product carriers: 1,9 m x 1,7 m x 2,0 m - Cycle time: 4,2 min./ Total processing time: 220 min. Condition of the system: according to age in a very good and well-kept condition, all system components fully functional. (Statement of an external expert after last review in August 2020)
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
- Knops Werkzeugmaschinen
- Konrad-Zuse-Straße 5
- 40789 Monheim
- Deutschland
-
02173 - 39494-0
02173 - 39494-29 -
maschinen@knops.de
www.knops.de
#1022-E06205 · Paint Spraying Unit
ROWIT - CSE 55/500 - - 2018 -
Technical details
Rowit painting cabin with electrical heating system and air extraction and a gap for crane chain. Length 8,1 m x wide 5,1 m x height 3,8 m
- Knops Werkzeugmaschinen
- Konrad-Zuse-Straße 5
- 40789 Monheim
- Deutschland
-
02173 - 39494-0
02173 - 39494-29 -
maschinen@knops.de
www.knops.de
#1022-E06220 · Paint Spraying Unit
ROWIT - CSE 55/500 - - 2018 -
Technical details
Rowit painting cabin with electrical heating system and air extraction and a gap for crane chain. Length 8,1 m x wide 5,1 m x height 3,8 m Please find the detailed technical description in the attachment. Purchase price in the year 2008 for the new unit EUR 85.000,- Our offer does not include dismantling / loading / transport.
Профіль трейдера: Kemmerich Werkzeugmaschinen
ТОВ
Зв'язатися з трейдером
ТОВ
Im Rottfeld 1a
40789 - Монхайм-на-Рейні
Німеччина
+ 49 2173 207474 "> + 49 2173 207474
+ 995 5913 00000
info@kemmerich.biz
www.kemmerich.biz
Профіль Трейдера
| ||||||||||||
|
Г-н Фолькер Кеммеріч | Андреас Кеммеріч |
Телефон: 02173 / 207472 | Телефон: 02173 / 207474 |
Факс: 02173 / 207473 | Факс: 02173 / 207473 |
E-Mail: sales@kemmerich.biz | E-Mail: info@kemmerich.biz |
TOP Manufacturer:
DURST -
Im Rottfeld 1a
Contact Trader
Im Rottfeld 1a
40789 - Monheim am Rhein
Deutschland
+49 2173 207474
+49 2173 207473
info@kemmerich.biz
www.kemmerich.biz
Contact person:
Herrn Andreas Kemmerich +49 2173 207474
Seit 1982 ist die Firma Kemmerich Werkzeugmaschinen GmbH auf dem sich ständig ändernden Werkzeugmaschinen-Markt aktiv und handelt als international tätiges Maschinen-Handelsunternehmen mit gebrauchten Maschinen für die spanabhebende und spanlose Verarbeitung der metallverarbeitenden Industrie
Kemmerich ist dabei auf Zahnradbearbeitungsmaschinen und Maschinen der Schwerzerspanung, wie zum Beispiel Dreh-, Fräs- und Schleifmaschinen sowie Bohrwerke, spezialisiert. Die Maschinen kommen unter anderem in der Automobilindustrie (Ausrüster und Zulieferer), im Zahnrad- und Getriebebau, der Produktion von Kugel- oder Wälzlagern, dem allgemeinen Maschinenbau zum Einsatz.
Ansässig ist das Unternehmen inzwischen in Monheim am Rhein, im Herzen des Rheinlandes und in unmittelbarer Nähe zu den Messestädten Köln und Düsseldorf und deren Flughäfen. Dort stehen auf einer 2.200 qm großen, beheizbaren Ausstellungsfläche eine Vielzahl von konventionellen wie auch CNC/SPS-gesteuerten Metall be- und verarbeitenden Werkzeugmaschinen stets zur Besichtigung und Vorführung bereit.
Mit einer Krankapazität von 32 Tonnen können jegliche Art von Maschinen gehändelt und bewegt werden. In der eigenen Werkstatt werden die Funktionsfähigkeit der Maschinen überprüft und gegebenenfalls festgestellte Mängel beseitigt. Zudem werden Maschinen auf Kundenwunsch modernisiert und modifiziert. Das Leistungsspektrum des Unternehmens umfasst zudem die Demontage oder Demontageüberwachung, Verladung, Verpackung sowie Land-, Seetransport und Zollabwicklungen, Montage und Inbetriebnahme beim Kunden durch Vermittlung von Spezialisten, Präsentation der Maschinen unter Strom (soweit möglich), Durchführung von Maschinenbewertungen und die Vermittlung von Kontakten.
Anstatt in neue, teure Werkzeugmaschinen zu investieren und um lange Lieferzeiten zu umgehen, lohnt es sich oftmals, eine gut gepflegte Gebrauchtmaschine zu kaufen.