'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Tool cabinets

          Machinelist: Tool cabinets


          Compressors

          used Workshop equipment Compressors Aircraft AIRPROFI 853/270/10 VKK


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7302 · Compressors

          Aircraft - AIRPROFI 853/270/10 VKK - - 2020 (NEU) -

          Technical details
          5,5 kW︱ 10 bar︱ - l︱ 850 l/min︱ 680 l/min︱container volume 270 l︱ 400 V︱ 1200 x 800 x 1970 mm︱ 204 kg︱
          Stationary piston compressor with refrigeration dryer, fine filter, Condensate conditioner for oil-water separation and automatic condensate drain
            5,5 kW
            10 bar
            - l
            850 l/min
            680 l/min
            container volume 270 l
            400 V
            1200 x 800 x 1970 mm
            204 kg
            Description :
            Stationary piston compressor with refrigeration dryer, fine filter,
            Condensate conditioner for oil-water separation and automatic condensate drain


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors CHICAGO PNEUMATIC CPVR15 + Lufttrockner + Kessel


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1893 · Compressors

          CHICAGO PNEUMATIC - CPVR15 + Lufttrockner + Kessel - - 2014 -

          Technical details
          power capacity 3 kW︱feed pressure 7 bar︱liter capacity / l︱weight 286 kg︱total power requirement / kW︱required space / m︱
            power capacity 3 kW
            feed pressure 7 bar
            liter capacity / l
            weight 286 kg
            total power requirement / kW
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors KAESER Schaltmodul


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06540 · Compressors

          KAESER - Schaltmodul - - 2014 - SAM 8/4

          Technical details
          serial number 2313 ︱control SAM 8/4 ︱rated current 0,7 - 0,35 A ︱frequency 60 Hz︱ 100-240 V
            serial number 2313
            control SAM 8/4
            rated current 0,7 - 0,35 A
            frequency 60 Hz
            100-240 V


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors COMPAIR Schraubenkompressor L 07 - 10A


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1050 · Compressors

          COMPAIR - Schraubenkompressor L 07 - 10A - - 2013 -

          Technical details
          Speed 3000 U/min.︱intake pressure 1,0 bar︱weight 205 kg︱total power requirement 7.5 kW︱
          Phase: 400V Volume rate of flow: 1,06m3 Stage pressures: 10 bar g Suction Pressures: 1,0 bar Full load curennt: 17A Speeds: 3000 U/min. Installed motor capacity: 7,5kW
            Speed 3000 U/min.
            intake pressure 1,0 bar
            weight 205 kg
            total power requirement 7.5 kW
            Description :
            Phase: 400V
            Volume rate of flow: 1,06m3
            Stage pressures: 10 bar g
            Suction Pressures: 1,0 bar
            Full load curennt: 17A
            Speeds: 3000 U/min.
            Installed motor capacity: 7,5kW


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors COMPAIR Schraubenkompressor L 80-7,5A


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S525 · Compressors

          COMPAIR - Schraubenkompressor L 80-7,5A - - 2009 -

          Technical details
          Speed / U/min.︱intake pressure / bar︱weight / kg︱total power requirement / kW︱
          1 screw compressor + refrigeration dryer + 2x compressed air tank Make: COMPAIR Type: LL80 7,5A Year: 2009 Serial no.: CD1000057200 Control Delcos 3100 Refrigerant dryer, Drypoint RA 500, 2 compressed air tanks, galvanised, capacity 3.000l - Load hours: 79.495
            Speed / U/min.
            intake pressure / bar
            weight / kg
            total power requirement / kW
            Description :
            1 screw compressor + refrigeration dryer + 2x compressed air tank

            Make: COMPAIR
            Type: LL80 7,5A
            Year: 2009
            Serial no.: CD1000057200
            Control Delcos 3100
            Refrigerant dryer, Drypoint RA 500, 2 compressed air tanks, galvanised,
            capacity 3.000l -

            Load hours: 79.495




        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors KAESER SK 18


          • desba TRADING
          • Im Hofgarten 6
          • 61130 Nidderau
          • Deutschland

          • +49 (0)6187 20 30 749
          • info@desba-trading.de
            www.desba-trading.de
          #2072-2061 · Compressors

          KAESER - SK 18 - - 1989 -

          Technical details
          11 KW︱
            11 KW


        • desba TRADING
        • Im Hofgarten 6
        • 61130 Nidderau
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors MICHELIN VCX 100/3


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65404 · Compressors

          MICHELIN - VCX 100/3 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 250/350 L/min︱Receiver capacity 100l / 10bar l / bar︱weight of the machine ca. 67 kg.︱Number of cylinders 2 Stk.︱motor 230V / 2,2KW V / KW︱range L-W-H 940 x 430 x 950 mm︱
            feed pressure 8 bar
            Effective free air delivery 250/350 L/min
            Receiver capacity 100l / 10bar l / bar
            weight of the machine ca. 67 kg.
            Number of cylinders 2 Stk.
            motor 230V / 2,2KW V / KW
            range L-W-H 940 x 430 x 950 mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors MICHELIN MBN 10


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65402 · Compressors

          MICHELIN - MBN 10 - - -Neu- -

          Technical details
          feed pressure 7 - 9 bar︱Effective free air delivery 230/130 l/min L/min︱Receiver capacity 10 l / bar︱weight of the machine ca. 25 kg.︱Number of cylinders 2 Stk.︱motor 230V / 1,4KW V / KW︱range L-W-H 600 x 310 x 510 mm︱
          Low-noise construction compressor 53 - 60dB
            feed pressure 7 - 9 bar
            Effective free air delivery 230/130 l/min L/min
            Receiver capacity 10 l / bar
            weight of the machine ca. 25 kg.
            Number of cylinders 2 Stk.
            motor 230V / 1,4KW V / KW
            range L-W-H 600 x 310 x 510 mm
            Description :
            Low-noise construction compressor
            53 - 60dB


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors DAEWOO DAAX 500 L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65418 · Compressors

          DAEWOO - DAAX 500 L - - -Neu- -

          Technical details
          Power 7,5 KW︱Receiver 500 L︱feed pressure 14 bar︱liter capacity 995 l︱connected load frequency 400 V︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 2,0 x 0,7 x ,125 m︱
            Power 7,5 KW
            Receiver 500 L
            feed pressure 14 bar
            liter capacity 995 l
            connected load frequency 400 V
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 2,0 x 0,7 x ,125 m


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors HYUNDAI Super Silent 24


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65405 · Compressors

          HYUNDAI - Super Silent 24 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 125/85 L/min︱Receiver capacity 24 / 8 l / bar︱weight of the machine ca. 22,5 kg.︱Number of cylinders 2 Stk.︱motor 230V / 0,75KW V / KW︱range L-W-H 600 x 310 x 510 mm︱
          Exhibition machine!! This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.
            feed pressure 8 bar
            Effective free air delivery 125/85 L/min
            Receiver capacity 24 / 8 l / bar
            weight of the machine ca. 22,5 kg.
            Number of cylinders 2 Stk.
            motor 230V / 0,75KW V / KW
            range L-W-H 600 x 310 x 510 mm
            Description :
            Exhibition machine!!
            This oil-free and compact Hyundai compressor has a low weight and super-quiet
            operation. Very quiet, about 53-60dB !! (Suitable for indoor use)
            Equipped with:
            ? safety valve.
            ? Pressure regulator with pressure gauge and coupling.
            ? Drain valve on the tank.
            ? Humidity separator.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors MICHELIN MVX 50/2


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65406 · Compressors

          MICHELIN - MVX 50/2 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 120/220 L/min︱Receiver capacity 50l / 10bar l / bar︱weight of the machine ca. 24 kg.︱Number of cylinders 1 Stk.︱motor 230V / 1,5KW V / KW︱range L-W-H 1,1 x 0,32 x 24 mm︱
          This compressor comes standard with: - Maintenance-free oil-free engine. - Safety valve. - Reduction valve with pressure gauge and coupling. - Drain cock on the tank. - Italian compressor of the highest quality.
            feed pressure 8 bar
            Effective free air delivery 120/220 L/min
            Receiver capacity 50l / 10bar l / bar
            weight of the machine ca. 24 kg.
            Number of cylinders 1 Stk.
            motor 230V / 1,5KW V / KW
            range L-W-H 1,1 x 0,32 x 24 mm
            Description :
            This compressor comes standard with:
            - Maintenance-free oil-free engine.
            - Safety valve.
            - Reduction valve with pressure gauge and coupling.
            - Drain cock on the tank.
            - Italian compressor of the highest quality.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors UWM 7.5/690/270  400V


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65414 · Compressors

          UWM - 7.5/690/270 400V - - -Neu- -

          Technical details
          feed pressure 13 bar︱Effective free air delivery 690 L/min︱Receiver capacity 270l / 16bar l / bar︱weight of the machine ca. 199 kg.︱motor 400V / 5,5KW V / KW︱range L-W-H 1,7 x 0,6 x 1,27 mm︱
          It is a high pressure version (especially for truck service or for heavy work). OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta circuit). Surcharge: EUR 379
            feed pressure 13 bar
            Effective free air delivery 690 L/min
            Receiver capacity 270l / 16bar l / bar
            weight of the machine ca. 199 kg.
            motor 400V / 5,5KW V / KW
            range L-W-H 1,7 x 0,6 x 1,27 mm
            Description :
            It is a high pressure version (especially for truck
            service or for heavy work).
            OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta
            circuit). Surcharge: EUR 379


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors UWM UWM 10/870/500


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65415 · Compressors

          UWM - UWM 10/870/500 - - -Neu- -

          Technical details
          Power 7,5 KW︱Receiver 500 L︱weight of the machine ca. 300 kg︱dimensions of the machine ca. 1,7x 0,6 x 1,45 m︱feed pressure 16 bar︱liter capacity 870 l︱
          The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V
            Power 7,5 KW
            Receiver 500 L
            weight of the machine ca. 300 kg
            dimensions of the machine ca. 1,7x 0,6 x 1,45 m
            feed pressure 16 bar
            liter capacity 870 l
            Description :
            The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump.
            Note that this is a high-pressure version (especially for
            trucks or places where higher pressure is required),
            Industry and hard work.
            The starting box is used to obtain a lower starting voltage (around
            to reduce peak voltages.
            The UWM 10/870/500 is available with 400 V


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors UWM 7.5/850/270


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65416 · Compressors

          UWM - 7.5/850/270 - - -Neu- -

          Technical details
          Power 7,5 KW︱Receiver 270 L︱weight of the machine ca. 180 Kg︱dimensions of the machine ca. 1700x600x1270 mm︱feed pressure 10 bar︱liter capacity 850 l/min︱connected load frequency 400 V︱
          The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages.
            Power 7,5 KW
            Receiver 270 L
            weight of the machine ca. 180 Kg
            dimensions of the machine ca. 1700x600x1270 mm
            feed pressure 10 bar
            liter capacity 850 l/min
            connected load frequency 400 V
            Description :
            The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable
            ideal for use at home, in the workshop, in industry
            and for heavy work.
            The starting box is used to obtain a lower starting voltage (around
            to reduce peak voltages.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors HBM HBM 10


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65411 · Compressors

          HBM - HBM 10 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 85/120 L/min︱Receiver capacity 10 l / 8 bar l / bar︱weight of the machine ca. 21 kg.︱Number of cylinders 2 Stk.︱motor 230V / 0,75KW V / KW︱range L-W-H 465 x 3800 x 575 mm︱
          Mobile low-noise compressor 53 - 60 DB(A)
            feed pressure 8 bar
            Effective free air delivery 85/120 L/min
            Receiver capacity 10 l / 8 bar l / bar
            weight of the machine ca. 21 kg.
            Number of cylinders 2 Stk.
            motor 230V / 0,75KW V / KW
            range L-W-H 465 x 3800 x 575 mm
            Description :
            Mobile low-noise compressor
            53 - 60 DB(A)


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors MICHELIN VCX 200/3


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65408 · Compressors

          MICHELIN - VCX 200/3 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 250/350 L/min︱Receiver capacity 200l / 10bar l / bar︱weight of the machine ca. 105 kg.︱Number of cylinders 2 Stk.︱motor 230V / 2,2KW V / KW︱range L-W-H 1140 x 510 x 920 mm︱
            feed pressure 8 bar
            Effective free air delivery 250/350 L/min
            Receiver capacity 200l / 10bar l / bar
            weight of the machine ca. 105 kg.
            Number of cylinders 2 Stk.
            motor 230V / 2,2KW V / KW
            range L-W-H 1140 x 510 x 920 mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors HBM Dental 30


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65403 · Compressors

          HBM - Dental 30 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 120/85 L/min︱Receiver capacity 30 Liter︱weight of the machine ca. 50 kg.︱Number of cylinders 2 0︱motor 230V / 0,75KW V / KW︱range L-W-H 570 x 640 x 800 mm︱
          Quiet professional 30 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is delivered as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at the bottom.
            feed pressure 8 bar
            Effective free air delivery 120/85 L/min
            Receiver capacity 30 Liter
            weight of the machine ca. 50 kg.
            Number of cylinders 2 0
            motor 230V / 0,75KW V / KW
            range L-W-H 570 x 640 x 800 mm
            Description :
            Quiet professional 30 liter compressor
            Noise level approx. 40 - 45 DB (A)
            This compressor is delivered as standard with:
            Safety valve, pressure reducing valve, pressure gauge, coupling and
            Drain valve at the bottom.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors HBM Dental 50


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65410 · Compressors

          HBM - Dental 50 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 200 / 175 L/min︱Receiver capacity 50 Liter︱weight of the machine ca. 77 kg.︱Number of cylinders 4 Stk.︱motor 230V / 1,5KW V / KW︱range L-W-H 580 x 780 x 820 mm︱
          Low-noise professional 50 liter compressor Noise level approx. 40 - 45 DB (A) This compressor comes standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at bottom.
            feed pressure 8 bar
            Effective free air delivery 200 / 175 L/min
            Receiver capacity 50 Liter
            weight of the machine ca. 77 kg.
            Number of cylinders 4 Stk.
            motor 230V / 1,5KW V / KW
            range L-W-H 580 x 780 x 820 mm
            Description :
            Low-noise professional 50 liter compressor
            Noise level approx. 40 - 45 DB (A)
            This compressor comes standard with:
            Safety valve, pressure reducing valve, pressure gauge, coupling and
            Drain valve at bottom.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors MICHELIN MBN 6


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65401 · Compressors

          MICHELIN - MBN 6 - - -Neu- -

          Technical details
          feed pressure 8 bar︱Effective free air delivery 130 l/min L/min︱Receiver capacity 6 l / bar︱weight of the machine ca. 15 kg.︱Number of cylinders 2 Stk.︱motor 230V / 0,75KW V / KW︱range L-W-H mm︱
          Low-noise compressor with 78dB
            feed pressure 8 bar
            Effective free air delivery 130 l/min L/min
            Receiver capacity 6 l / bar
            weight of the machine ca. 15 kg.
            Number of cylinders 2 Stk.
            motor 230V / 0,75KW V / KW
            Description :
            Low-noise compressor with 78dB


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors BOGE - MATTEI - BEKO


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80467 · Compressors

          BOGE - MATTEI - BEKO - - - -

          Technical details
          1
          Spare parts package for Compressors and cold dryer from BOGE MATTEI and BEKO. Upon request single parts can be offered. Detailed photos can be provided.
            1
            Description :
            Spare parts package for Compressors and cold dryer from BOGE MATTEI and BEKO.
            Upon request single parts can be offered.

            Detailed photos can be provided.


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Compressors BATTENFELD DE 13


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-Z1023 · Compressors

          BATTENFELD - DE 13 - - -

          Technical details
          Power 5,5 KW︱Receiver 50 L︱weight of the machine ca. 0,450 t︱dimensions of the machine ca. . m︱feed pressure 330 bar︱liter capacity . l︱
            Power 5,5 KW
            Receiver 50 L
            weight of the machine ca. 0,450 t
            dimensions of the machine ca. . m
            feed pressure 330 bar
            liter capacity . l


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact

          Tool cabinets

          used Workshop equipment Tool cabinets WMT Modular 9-teilig


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65120 · Tool cabinets

          WMT - Modular 9-teilig - - -Neu- -

          Technical details
          width 900 mm︱depth 450 mm︱height 1800 mm︱weight 0,152 t︱
          All drawers are equipped with massive ball bearing guides. All drawers are equipped with 2 x 2 ball bearing guides. All cabinets and drawers are equipped with a lock with 2 keys. All doors are equipped with magnetic locks. The large cabinets are equipped with 3 shelves. (Height-adjustable) The small cabinets are equipped with 1 plan. (Height-adjustable) Powder-coated wear-resistant surface. Punch signs for hanging tools. Equipped with 16 adjustable feet. Overall dimensions 267 x 230 x 46 cm. (Width x height x depth) Dimensions of the 2 large cabinets with door 66.5 x 181 x 46 cm. Dimensions of the 3 small cabinets with door 66.5 x 76 x 46 cm. Dimensions of the cabinet with drawers 66.5 x 76 x 46 cm. Internal dimensions of the drawers 57 x 37 x 22 cm. Dimensions of the wooden worktop 143 x 46 x 3 cm. Dimensions of the tool shelf 134 x 70 cm.
            width 900 mm
            depth 450 mm
            height 1800 mm
            weight 0,152 t
            Description :
            All drawers are equipped with massive ball bearing guides.
            All drawers are equipped with 2 x 2 ball bearing guides.
            All cabinets and drawers are equipped with a lock with 2 keys.
            All doors are equipped with magnetic locks.
            The large cabinets are equipped with 3 shelves. (Height-adjustable)
            The small cabinets are equipped with 1 plan. (Height-adjustable)
            Powder-coated wear-resistant surface.
            Punch signs for hanging tools.
            Equipped with 16 adjustable feet.

            Overall dimensions 267 x 230 x 46 cm. (Width x height x depth)
            Dimensions of the 2 large cabinets with door 66.5 x 181 x 46 cm.
            Dimensions of the 3 small cabinets with door 66.5 x 76 x 46 cm.
            Dimensions of the cabinet with drawers 66.5 x 76 x 46 cm.
            Internal dimensions of the drawers 57 x 37 x 22 cm.
            Dimensions of the wooden worktop 143 x 46 x 3 cm.
            Dimensions of the tool shelf 134 x 70 cm.




        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Tool cabinets WMT Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65100 · Tool cabinets

          WMT - Profi - - -Neu- -

          Technical details
          width 900 mm︱depth 450 mm︱height 1800 mm︱weight 0,09 t︱
          High quality professional tool cabinet. Cabinet with 4 shelves. Maximum load per shelf 150 kg. Color code 7035. Weight 87kg.
            width 900 mm
            depth 450 mm
            height 1800 mm
            weight 0,09 t
            Description :
            High quality professional tool cabinet.
            Cabinet with 4 shelves.
            Maximum load per shelf 150 kg.
            Color code 7035.
            Weight 87kg.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Workshop equipment Tool cabinets WMT Profi Kombi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-65102 · Tool cabinets

          WMT - Profi Kombi - - -Neu- -

          Technical details
          width 900 mm︱depth 450 mm︱height 1800 mm︱weight 0,152 t︱
          High quality professional tool cabinet. This cabinet consists of two separate boxes that are mounted on top of each other can be. Both cabinets are 90 cm. high, 90 cm. wide and 45 cm deep. Both shelves are adjustable in height and can hold 150 kg each Shelves are loaded. The drawer cabinet is equipped with 6 drawers of 100 mm height. One Drawer is 200mm high. Max. load per drawer is 100kg. All drawers are centrally locked.
            width 900 mm
            depth 450 mm
            height 1800 mm
            weight 0,152 t
            Description :
            High quality professional tool cabinet.
            This cabinet consists of two separate boxes that are mounted on top of each
            other
            can be. Both cabinets are 90 cm. high, 90 cm. wide and 45 cm deep.
            Both shelves are adjustable in height and can hold 150 kg each
            Shelves are loaded.
            The drawer cabinet is equipped with 6 drawers of 100 mm height. One
            Drawer is 200mm high. Max. load per drawer is 100kg.
            All drawers are centrally locked.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          TOP Manufacturer:

          WMT - TUEL KELCH - - LISTA/DICK -