'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Injection-moulding machine (rubber)

          Machinelist: Injection-moulding machine (rubber)


          Injection-moulding machine (rubber)

          used Injection Moulding Injection-moulding machine (rubber) ARBURG 270 C 500-250 LSR


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B220501 · Injection-moulding machine (rubber)

          ARBURG - 270 C 500-250 LSR - - 1999 -

          Technical details

          Condition: used, Specification: injection moulding machine for liquid silicone LSR - used incl. 2KM dosing system for 25 liter Hobbocks and a handling system WEMO W-HP7/8 year 2011. clamping unit: - clamping force: 500 kN - Opening stroke: 350 mm - Mould installation height: 200 mm - Distance between clamping platens: 550 mm - size of heating platens: 270 x 270 mm - Heating: 6,5 kW - Ejector stroke: 125 mm - Ejector force: 30 kN Injection unit: - Screw diameter: 25 mm - Injection volume approx.: 64 cm³ - Injection flow: 112 cm³/s - Spec. injection pressure increased: 2,470 bar - Nozzle stroke: 240 mm - Nozzle contact pressure: 70 kN - Operating voltage: 3x 400V, 50 Hz - Pump motor: 15 kW - Total power: 21,5 kW - Weight without oil: 2,230 kg - Dimensions L/W/height: Sensor equipment: - WEMO Automation GmbH Handling Make: W-HP7/8 - Year of construction 2011 - Dosing unit for liquid silicone, Make 2KM, for 25 litre hobbocks
            Description :
            Condition: used,

            Specification: injection moulding machine
            for liquid silicone LSR - used
            incl. 2KM dosing system for 25 liter Hobbocks
            and a handling system WEMO W-HP7/8 year 2011.

            clamping unit:
            - clamping force: 500 kN
            - Opening stroke: 350 mm
            - Mould installation height: 200 mm
            - Distance between clamping platens: 550 mm
            - size of heating platens: 270 x 270 mm
            - Heating: 6,5 kW
            - Ejector stroke: 125 mm
            - Ejector force: 30 kN

            Injection unit:
            - Screw diameter: 25 mm
            - Injection volume approx.: 64 cm³
            - Injection flow: 112 cm³/s
            - Spec. injection pressure increased: 2,470 bar
            - Nozzle stroke: 240 mm
            - Nozzle contact pressure: 70 kN
            - Operating voltage: 3x 400V, 50 Hz
            - Pump motor: 15 kW
            - Total power: 21,5 kW
            - Weight without oil: 2,230 kg
            - Dimensions L/W/height:

            Sensor equipment:
            - WEMO Automation GmbH Handling Make: W-HP7/8
            - Year of construction 2011
            - Dosing unit for liquid silicone,
            Make 2KM, for 25 litre hobbocks



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Injection Moulding Injection-moulding machine (rubber) ARBURG 270 M 350-90


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B230201 · Injection-moulding machine (rubber)

          ARBURG - 270 M 350-90 - - 1996 -

          Technical details
          clamping force 350 kN︱injection volume 59 cm³︱screw diameter 25 mm︱platen size 400 x 400 mm︱
          Condition: used, Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit: - clamping force: 350 kN - clamping platen size: 400 x 400 mm - Clear distance between tie bars: 270 x 270 mm - Mould installation height min.: 225 mm - Distance between clamping platens: max. 550 mm - Opening stroke max.: 325 mm - Ejector stroke: 125 mm Injection unit: - Screw diameter: 25 mm x 20D - Injection volume max.: 49 cm³ - Injection part weight: 59 g/hp - Max. injection pressure: 1,860 bar - Screw circumferential speed: 37 m/min - Cylinder heating: 4x 900 W - Nozzle heating: 300 W - Heating complete: 4,6 kW - Pump motor: 11 kW - Total power: 15,6 kW - Connection value: 3x 400 V, 50 Hz - Electrical connection (pre-fuse): 50 A - Weight approx.: 1,650 kg - Oil filling: 190 litres - Switch cabinet: 150 kg - Operating hours approx.: 1,100 h
            clamping force 350 kN
            injection volume 59 cm³
            screw diameter 25 mm
            platen size 400 x 400 mm
            Description :
            Condition: used,

            Specification: injection moulding machine for rubber
            - used

            International size: 350-90

            clamping unit:
            - clamping force: 350 kN
            - clamping platen size: 400 x 400 mm
            - Clear distance between tie bars: 270 x 270 mm
            - Mould installation height min.: 225 mm
            - Distance between clamping platens: max. 550 mm
            - Opening stroke max.: 325 mm
            - Ejector stroke: 125 mm

            Injection unit:
            - Screw diameter: 25 mm x 20D
            - Injection volume max.: 49 cm³
            - Injection part weight: 59 g/hp
            - Max. injection pressure: 1,860 bar
            - Screw circumferential speed: 37 m/min
            - Cylinder heating: 4x 900 W
            - Nozzle heating: 300 W
            - Heating complete: 4,6 kW
            - Pump motor: 11 kW
            - Total power: 15,6 kW

            - Connection value: 3x 400 V, 50 Hz
            - Electrical connection (pre-fuse): 50 A
            - Weight approx.: 1,650 kg
            - Oil filling: 190 litres
            - Switch cabinet: 150 kg
            - Operating hours approx.: 1,100 h



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Injection Moulding Injection-moulding machine (rubber) ARBURG 520 C 1300-350


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B220801 · Injection-moulding machine (rubber)

          ARBURG - 520 C 1300-350 - - 2001 -

          Technical details
          clamping force 1.300 kN︱injection volume 230 cm³︱screw diameter 45 mm︱platen size 685 x 685 mm︱
          Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,380 kg - Oil filling: 260 litres - Operating hours approx.: 64,903 h
            clamping force 1.300 kN
            injection volume 230 cm³
            screw diameter 45 mm
            platen size 685 x 685 mm
            Description :
            Condition: used,

            Specification: injection moulding machine for TPE
            - used

            including Koch dosing unit

            clamping unit:
            - clamping force: 1.300 kN
            - heating platen size: 685 x 685 mm
            - Clear distance between tie bars: 470 x 470 mm
            - Mould installation height min.: 250 mm
            - Distance between platens max.: 900 mm
            - Opening stroke max.: 650 mm
            - Ejector stroke: 225 mm

            Injection unit:
            - Screw diameter: 45 mm x 18D
            - Injection volume max.: 230 cm³
            - Injection part weight: 210 g/hp
            - Max. injection pressure: 1,670 bar
            - Screw circumferential speed: 75 m/min
            - Cylinder heating: 4x 2,200 W
            - Nozzle heating: 600 W

            - Connection value: 3x 400 V, 50 Hz
            - Electrical connection (back-up fuse): 100 A
            - Weight approx.: 6,380 kg
            - Oil filling: 260 litres
            - Operating hours approx.: 64,903 h




        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Injection Moulding Injection-moulding machine (rubber) ARBURG Allrounder 220 D/250-75


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B190106 · Injection-moulding machine (rubber)

          ARBURG - Allrounder 220 D/250-75 - - 1989 -

          Technical details



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Injection Moulding Injection-moulding machine (rubber) ARBURG Allrounder 320 C 600-100


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210201 · Injection-moulding machine (rubber)

          ARBURG - Allrounder 320 C 600-100 - - 1998 -

          Technical details

          Condition: used, specification: horizontal injection moulding machine for liquid silicone - used - Selogica control injection unit: - screw diameter: 20 mm - shot volume max.: 30 cm³ - Shot volume: 60 cm³ - Shot weight max.: 26 g - Spec. injection pressure: 2500 bar clamping unit: - clamping force: 600 kN - Opening stroke max.: 350 mm - Installation height max.: 350 - Distance between platens min.: 200 mm - platen distance max.: 550 mm - Clamping platen size: 446 x 446 mm - Distance between tie bars: 270 x 270 mm - Centring : 125 x 125 mm - Cut-through: 125 mm Special equipment: - BAP tool weight with guide: 400 kg - BAP tool weight: 250 kg - FAP Mould weight: 150 kg - Ejector force ejector (FAP/BAP): 30 kN - Ejector stroke ejector (FAP/BAP): 125 mm
            Description :
            Condition: used,

            specification: horizontal injection moulding machine for
            liquid silicone - used

            - Selogica control

            injection unit:
            - screw diameter: 20 mm
            - shot volume max.: 30 cm³
            - Shot volume: 60 cm³
            - Shot weight max.: 26 g
            - Spec. injection pressure: 2500 bar

            clamping unit:
            - clamping force: 600 kN
            - Opening stroke max.: 350 mm
            - Installation height max.: 350
            - Distance between platens min.: 200 mm
            - platen distance max.: 550 mm
            - Clamping platen size: 446 x 446 mm
            - Distance between tie bars: 270 x 270 mm
            - Centring : 125 x 125 mm
            - Cut-through: 125 mm

            Special equipment:
            - BAP tool weight with guide: 400 kg
            - BAP tool weight: 250 kg
            - FAP Mould weight: 150 kg
            - Ejector force ejector (FAP/BAP): 30 kN
            - Ejector stroke ejector (FAP/BAP): 125 mm



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Injection Moulding Injection-moulding machine (rubber) ARBURG Allrounder 420 C 1000-250


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210204 · Injection-moulding machine (rubber)

          ARBURG - Allrounder 420 C 1000-250 - - 1996 -

          Technical details

          Condition: used, specification: horizontal injection moulding machine for liquid silicone - used System is defective! injection unit: - screw diameter: 40 mm - shot volume max.: 180 cm³ - Shot volume: 256 cm³ - Shot weight max.: 158 g - Spec. injection pressure: 1350 bar clamping unit: - clamping force: 800 kN - Opening stroke max.: 500 mm - Installation height max.: 500 mm - Distance between platens min.: 250 mm - platen distance max.: 750 mm - Clamping platen size: 570 x 570 mm - Distance between tie bars: 420 x 420 mm - Centring : 125 x 125 mm - Cut-through: 125 mm Special equipment: - BAP tool weight: 600 kg - FAP Mould weight: 300 kg - Ejector force ejector (FAP): 30 kN - Ejector stroke ejector (FAP): 125 mm
            Description :
            Condition: used,

            specification: horizontal injection moulding machine for
            liquid silicone - used

            System is defective!

            injection unit:
            - screw diameter: 40 mm
            - shot volume max.: 180 cm³
            - Shot volume: 256 cm³
            - Shot weight max.: 158 g
            - Spec. injection pressure: 1350 bar

            clamping unit:
            - clamping force: 800 kN
            - Opening stroke max.: 500 mm
            - Installation height max.: 500 mm
            - Distance between platens min.: 250 mm
            - platen distance max.: 750 mm
            - Clamping platen size: 570 x 570 mm
            - Distance between tie bars: 420 x 420 mm
            - Centring : 125 x 125 mm
            - Cut-through: 125 mm

            Special equipment:
            - BAP tool weight: 600 kg
            - FAP Mould weight: 300 kg
            - Ejector force ejector (FAP): 30 kN
            - Ejector stroke ejector (FAP): 125 mm



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Injection Moulding Injection-moulding machine (rubber) ARBURG Allrounder 420 C 1000-250


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210203 · Injection-moulding machine (rubber)

          ARBURG - Allrounder 420 C 1000-250 - - 1998 -

          Technical details

          Condition: used, specification: horizontal injection moulding machine for liquid silicone - used injection unit: - screw diameter: 40 mm - shot volume max.: 180 cm³ - Shot volume: 256 cm³ - Shot weight max.: 158 g - Spec. injection pressure: 1350 bar clamping unit: - clamping force: 800 kN - Opening stroke max.: 500 mm - Installation height max.: 500 mm - Distance between platens min.: 250 mm - platen distance max.: 750 mm - Clamping platen size: 570 x 570 mm - Distance between tie bars: 420 x 420 mm - Centring : 125 x 125 mm - Cut-through: 125 mm Special equipment: - BAP tool weight: 600 kg - FAP Mould weight: 300 kg - Ejector force ejector (FAP): 30 kN - Ejector stroke ejector (FAP): 125 mm
            Description :
            Condition: used,

            specification: horizontal injection moulding machine for
            liquid silicone - used

            injection unit:
            - screw diameter: 40 mm
            - shot volume max.: 180 cm³
            - Shot volume: 256 cm³
            - Shot weight max.: 158 g
            - Spec. injection pressure: 1350 bar

            clamping unit:
            - clamping force: 800 kN
            - Opening stroke max.: 500 mm
            - Installation height max.: 500 mm
            - Distance between platens min.: 250 mm
            - platen distance max.: 750 mm
            - Clamping platen size: 570 x 570 mm
            - Distance between tie bars: 420 x 420 mm
            - Centring : 125 x 125 mm
            - Cut-through: 125 mm

            Special equipment:
            - BAP tool weight: 600 kg
            - FAP Mould weight: 300 kg
            - Ejector force ejector (FAP): 30 kN
            - Ejector stroke ejector (FAP): 125 mm



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Injection Moulding Injection-moulding machine (rubber) ARBURG Allrounder 420 C 800-225


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210202 · Injection-moulding machine (rubber)

          ARBURG - Allrounder 420 C 800-225 - - 1994 -

          Technical details

          Condition: used, specification: horizontal injection moulding machine for liquid silicone - used injection unit: - screw diameter: 40 mm - shot volume max.: 180 cm³ - Shot volume: 256 cm³ - Shot weight max.: 158 g - Spec. injection pressure: 1350 bar clamping unit: - clamping force: 800 kN - Opening stroke max.: 500 mm - Installation height max.: 500 mm - Distance between platens min.: 250 mm - platen distance max.: 750 mm - Clamping platen size: 570 x 570 mm - Distance between tie bars: 420 x 420 mm - Centring : 125 x 125 mm - Cut-through: 125 mm Special equipment: - BAP tool weight: 600 kg - FAP Mould weight: 300 kg - Ejector force ejector (FAP): 30 kN - Ejector stroke ejector (FAP): 125 mm
            Description :
            Condition: used,

            specification: horizontal injection moulding machine for
            liquid silicone - used

            injection unit:
            - screw diameter: 40 mm
            - shot volume max.: 180 cm³
            - Shot volume: 256 cm³
            - Shot weight max.: 158 g
            - Spec. injection pressure: 1350 bar

            clamping unit:
            - clamping force: 800 kN
            - Opening stroke max.: 500 mm
            - Installation height max.: 500 mm
            - Distance between platens min.: 250 mm
            - platen distance max.: 750 mm
            - Clamping platen size: 570 x 570 mm
            - Distance between tie bars: 420 x 420 mm
            - Centring : 125 x 125 mm
            - Cut-through: 125 mm

            Special equipment:
            - BAP tool weight: 600 kg
            - FAP Mould weight: 300 kg
            - Ejector force ejector (FAP): 30 kN
            - Ejector stroke ejector (FAP): 125 mm



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Injection Moulding Injection-moulding machine (rubber) BATTENFELD BA 1500/400H/125L CDC


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B220802 · Injection-moulding machine (rubber)

          BATTENFELD - BA 1500/400H/125L CDC - - 1999 -

          Technical details

          Condition: used, Specification: injection moulding machine for TPE - used type: BA 1500/400H/125L CDC clamping unit 1500: - clamping force: 1.500 kN - heating platen size: 740 x 740 mm - Clear distance between tie bars: 500 x 500 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 160 mm Injection unit 1 400: - Screw diameter: 35 mm x 22.9D - Injection volume max.: 115.4 cm³ - Injection part weight: 105 g - Max. injection pressure: 1,096 bar - Screw speed max.: 349 rpm Injection unit 2: - Screw diameter: 18 mm - Connection value: 3x 400 V, 50 Hz - Control voltage: 24 VDC - Electrical connection (back-up fuse): 125 A - Dimensions W/D/H approx.: 5,300 x 3,100 x 2,100 mm (see sketch) - Weight approx.: 11,000 kg - Operating hours approx.: 77,954 h The system is not functional without repair work. Screen does not boot up.
            Description :
            Condition: used,

            Specification: injection moulding machine for TPE
            - used
            type: BA 1500/400H/125L CDC

            clamping unit 1500:
            - clamping force: 1.500 kN
            - heating platen size: 740 x 740 mm
            - Clear distance between tie bars: 500 x 500 mm
            - Mould installation height min.: 250 mm
            - Distance between platens max.: 900 mm
            - Opening stroke max.: 650 mm
            - Ejector stroke: 160 mm

            Injection unit 1 400:
            - Screw diameter: 35 mm x 22.9D
            - Injection volume max.: 115.4 cm³
            - Injection part weight: 105 g
            - Max. injection pressure: 1,096 bar
            - Screw speed max.: 349 rpm

            Injection unit 2:
            - Screw diameter: 18 mm

            - Connection value: 3x 400 V, 50 Hz
            - Control voltage: 24 VDC
            - Electrical connection (back-up fuse): 125 A
            - Dimensions W/D/H approx.: 5,300 x 3,100 x 2,100 mm
            (see sketch)
            - Weight approx.: 11,000 kg
            - Operating hours approx.: 77,954 h

            The system is not functional without repair work.
            Screen does not boot up.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • used Injection Moulding Injection-moulding machine (rubber) BOY 35 EV


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B180601 · Injection-moulding machine (rubber)

          BOY - 35 EV - - 2011 -

          Technical details



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

          •   
          •   
          • 1