Lift table

sweeping width 942 mm︱working width Bodendüse: 700 mm︱tank Reinigung: 79 l︱tank Schmutzwasser: 83 l︱weight of the machine ca. 145 kg︱dimensions of the machine ca. 1,32 x 0,7 x 1,1 m︱

---

- Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft

total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

dimension 3.709 x 1.744 x 1.942 mm︱loading height 1.002 mm︱weight 1.332 kg︱tank capacity 600 l︱through-put width 307 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

6,0 m3/min︱rated current 9 A︱total power requirement 2,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

swarf cleaner

total power requirement / kW︱weight of the machine ca. / t︱required space / m︱

---

sweeping width 800 inkl.Seitenb.︱container volume 114 l︱total power requirement 3,0 kW︱ 2759 m²/h︱ max. 5232 m²/h︱

---

Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!

temperature 80/130 °C︱0 100 kg︱filling capacity 750 l︱basket dimensions 670x480 mm︱number 25 ︱total power requirement 43 kW︱weight of the machine ca. 890 kg︱dimensions of the machine ca. 185x190x150 cm︱

---

0 20 l/min︱total power requirement 4 kW︱weight of the machine ca. t︱required space m︱

---

APRON CLEANER APRON CLEANER for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment. for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment.

table length 1450 mm︱table width 1140 mm︱stroke height 82 / 760 mm︱weight max. in kg 1000 kg︱total power requirement 0,75 kW︱weight of the machine ca. 250 kg︱

---

table length 1300 mm︱table width 800 mm︱stroke height 190 / 1010 mm︱weight max. in kg 1000 kg︱total power requirement 0,75 kW︱weight of the machine ca. 220 kg︱

---

table length 1300 mm︱table width 800 mm︱stroke height 190 / 1010 mm︱weight max. in kg 2000 kg︱total power requirement 0,75 kW︱weight of the machine ca. 280 kg︱

---

Item no.: 6154200 / S94546154200 - Hydraulic compact scissor lift table - For ergonomic work at the optimum working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Infinitely variable lifting and lowering - Sturdy powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Fulfills the safety criteria of EN 1570 - High-pressure cylinder with double safety function

table length 855 mm︱table width 500 mm︱stroke height 340 / 900 mm︱weight max. in kg 500 kg︱weight of the machine ca. 87 kg︱

---

Sanders-Artnr. 10061751

table length 1450 mm︱table width 1140 mm︱stroke height 80 - 840 mm︱weight max. in kg 1000 kg︱total power requirement ? kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 2*1,5*0,8 m︱

---

Lifting capacity 1.500 kg︱CNC-Marke - ︱CNC-Modell - ︱height adjustment 800 mm︱

---

Brand Logitrans Type EHL 1004 Year of make 2019 Machine weight 104 kg Scissors table Throat depth 1.200 Lifting capacity 1.500 kg Height displacement 800 mm Hydraulic lifting In stock 6 High lift pallet truck Hydraulic controls on lifting section

Lifting capacity 2000 kg︱CNC-Marke - ︱CNC-Modell - ︱table length 2.500 mm︱table width 1.500 mm︱Lifting height 1.600 mm︱

---

Brand Armo Type AX Year of make 2011 Scissors table Capacity 2 T Table length 2500 mm Table width 1500 mm Lifting height 1600 mm

Lifting capacity 1.800 kg︱CNC-Marke - ︱CNC-Modell - ︱

---

Brand Still Type EGU 18 Year of make 1998 Lifting capacity 1800 kg Working hours 4600 Machine weight 310 kg Electric pallet truck Includes battery charger

weight max. in kg 2000 kg︱table length 1300 mm︱stroke height 190-1010 mm︱table width 800 mm︱stroke of worktool slide 22 mm/sek.︱weight 280 kg︱

---

Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function

weight max. in kg 1000 kg︱table width 800 mm︱stroke height 190-1010 mm︱table length 1300 mm︱stroke of worktool slide 40 mm/sek.︱weight 220 kg︱

---

Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function

Lifting capacity 1200 kg︱CNC-Marke - ︱CNC-Modell - ︱

---

Scissor table / pallet truck

Capacity 8 T︱Height displacement 1250 mm︱In stock 1 ︱

---

Schear table with electrically driven roller conveyor (3.500 x 1.000 mm) No hydro unit available

Lifting capacity 400 kg︱CNC-Marke - ︱CNC-Modell - ︱

---

Capacity: 400 kg Machine dimensions (lxwxh): 1.200 x 600 x 1.000 mm

Lifting capacity 400 kg︱CNC-Marke - ︱CNC-Modell - ︱

---

Capacity: 400 kg Machine dimensions (lxwxh): 1.250 x 900 x 950 mm 230V

Lifting capacity 500 kg︱CNC-Marke - ︱CNC-Modell - ︱

---

Capacity: 500 kg Machine dimensions (lxwxh): 1.250 x 800 x 1.100 mm 380V