'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Suction

          Machinelist: Suction


          Suction

          used Other attachments Suction TEKA Cartmaster


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2810012 · Suction

          TEKA - Cartmaster - - NEU -

          Technical details
          1860 m³/h︱ Pressung 2.900 Pa︱ 1,1 kW︱filter surface area 10 m²︱ 72 dB(A)︱ 400/50 V/Hz︱ 665 x 1100 x 1495 mm︱ 200 kg︱
          - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system --------------------------------------- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media --------------------------------------- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ------------------------ The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.
            1860 m³/h
            Pressung 2.900 Pa
            1,1 kW
            filter surface area 10 m²
            72 dB(A)
            400/50 V/Hz
            665 x 1100 x 1495 mm
            200 kg
            Description :
            - Hose arm 3 m, joints inside
            - Filter cartridge: dust class M
            - Pre-filter: baffle plate
            - Current type: 3Ph+N+PE

            The filter system
            ---------------------------------------
            The mobile filter system of the Cartmaster IFA type is thanks to the automatic
            Cleaning particularly suitable for welding work with unalloyed and
            alloyed steels, galvanized material and aluminum with heavy smoke development.
            It corresponds to the safety requirements for devices
            Welding fume class "W3" (high-alloy steels with alloy components > 30%
            Nickel-based alloy).If used as intended, the system can be used for the
            Recirculation mode used because the requirements for the
            Exceptions according to TRGS 560 are fulfilled. That special
            developed, dirt-dependent cleaning system ensures a good
            cleaning behavior of the filter cartridge, so that an optimal suction
            performance
            is guaranteed throughout the operation. The cleaned particles
            fall into a dust collection drawer from which they can then be disposed of.
            The powerful spiral fan ensures even with saturated
            Filter cartridges for a high volume flow.

            The filter media
            ---------------------------------------
            A baffle serves as a pre-separator for coarse particles.
            The filter cartridge installed below (dust class M, degree of separation > 99%)
            filters the finest smoke and dust particles. The cartridge is factory
            coated which increases the service life.

            The extraction arm
            ------------------------
            The extraction arm can be moved with the 3 internal joints
            Position spring support slightly and is in the set position
            cantilevered. A throttle flap integrated in the extraction hood enables the
            Flow rate setting.
          Datasheet
          Request / Contact
          used Other attachments Suction TEKA filtoo 1,1 kW 1x3 mtr.


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-8366978 · Suction

          TEKA - filtoo 1,1 kW 1x3 mtr. - - NEU -

          Technical details
          2500 m³/h︱ 2500 kPa︱volume capacity 1600 m³/h︱feed volume > 99 %︱ 1,1 kW︱ 72 dB(A)︱ 0,58 x 0,58 x 0,9 m︱ 80 kg︱ 230 V / 50 Hz V︱
          Particle pre-separator: coarse filter, pre-filter Main particle separator: main filter Gas separator: activated carbon filter Hose arm: joints inside What is the filtoo? The filtoo filter device newly developed by TEKA is a mobile filter system, for many tasks in the area of ??filtration of smoke and dust and gases can be used. The device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%). at The filtoo is intended to be used for the separation of smoke suitable, which by welding separation and joining processes at the Machining of unalloyed steels, including high-alloy chrome / Nickel steels are released. How does the filtoo work? The Polluted air sucked into the filter system. In a multi-level The filter process filters the particles / gases from the air stream and the clean air is fed back into the work area. Where can the filtoo be used? At welding workplaces, in the workshop area, for soldering applications, at Restorers and locksmiths. What do you get for your money? All you get is a completely ready-to-use "plug and play system" the recording device must be connected before commissioning. How is the filtoo set up? The housing is made of a stable sheet steel construction and is inside as well as provided with a powder coating on the outside. The filter elements are over A maintenance hatch is accessible and can therefore be accessed very easily and quickly can be removed. The system has functional controls.
            2500 m³/h
            2500 kPa
            volume capacity 1600 m³/h
            feed volume > 99 %
            1,1 kW
            72 dB(A)
            0,58 x 0,58 x 0,9 m
            80 kg
            230 V / 50 Hz V
            Description :
            Particle pre-separator: coarse filter, pre-filter
            Main particle separator: main filter
            Gas separator: activated carbon filter

            Hose arm: joints inside

            What is the filtoo?
            The filtoo filter device newly developed by TEKA is a mobile filter system,
            for many tasks in the area of ??filtration of smoke and dust
            and gases can be used. The device was based on DIN EN ISO 15012-1
            (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140)
            for welding smoke class "W3" (degree of separation:> 99.9%). at
            The filtoo is intended to be used for the separation of smoke
            suitable, which by welding separation and joining processes at the
            Machining of unalloyed steels, including high-alloy chrome /
            Nickel steels are released.

            How does the filtoo work?
            The
            Polluted air sucked into the filter system. In a multi-level
            The filter process filters the particles / gases from the air stream and the
            clean air is fed back into the work area.

            Where can the filtoo be used?
            At welding workplaces, in the workshop area, for soldering applications, at
            Restorers and locksmiths.

            What do you get for your money?
            All you get is a completely ready-to-use "plug and play system"
            the recording device must be connected before commissioning.

            How is the filtoo set up?
            The housing is made of a stable sheet steel construction and is inside
            as well as provided with a powder coating on the outside. The filter elements
            are over
            A maintenance hatch is accessible and can therefore be accessed very easily and
            quickly
            can be removed. The system has functional controls.
          Datasheet
          Request / Contact
          used Other attachments Suction NOVUS Airtower FT 20.000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7227 · Suction

          NOVUS - Airtower FT 20.000 - - NEU -

          Technical details
          400 V / 50 Hz< 75 dB(A) ︱power capacity 15 kW︱volume capacity 20.000 m³/h︱weight 1590 kg︱
          Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter area: 295 m² Dimensions: Width filter unit: 2,066 mm Depth filter unit: 1,756 mm Height of filter unit: 3,643 mm Dust container: 200 liters Version Sanders incl .: - NOVUS efficiency package FT20.000 - timer - NOVUS particle sensor
            400 V / 50 Hz
            < 75 dB(A)
            power capacity 15 kW
            volume capacity 20.000 m³/h
            weight 1590 kg
            Description :
            Modular plug & play airtower
            for hall extraction of welding fumes with integrated, soundproofed
            Fan, automatic, differential pressure controlled
            Filter cleaning, system control with color display, particle pre-separation and
            IFA - tested filter cartridges. The system is for a volume flow of
            average 20,000 m³ / h designed

            1st filter stage - main filter:
            Filter area: 222 m²
            Number of filters: 6 pieces
            Dust class according to DIN EN
            60335-2-69: M.
            Degree of separation:> 99.9%
            Cleaning: Jet - Pulse
            Compressed air connection: NW 7.2 mm,
            4-6 bar, oil and water free
            2nd filter stage - fine dust filter.
            Filter area: 65 m²
            Filter class according to ISO 16890: ISO
            ePM1 80%
            3rd filter stage -
            Synthetic fiber mats:
            Filter area: 8 m²
            Filter class according to ISO 16890: ISO
            coarse 60%
            Total filter area: 295 m²
            Dimensions:
            Width filter unit: 2,066 mm
            Depth filter unit: 1,756 mm
            Height of filter unit: 3,643 mm
            Dust container: 200 liters

            Version Sanders incl .:
            - NOVUS efficiency package FT20.000
            - timer
            - NOVUS particle sensor
          Datasheet
          Request / Contact
          used Other attachments Suction TEKA StrongMaster IFA


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2810013 · Suction

          TEKA - StrongMaster IFA - - NEU -

          Technical details
          1860 m³/h︱ Pressung 2.900 Pa︱ 1,1 kW︱filter surface area 10 m²︱ 72 dB(A)︱ 400/50 V/Hz︱ 665 x 820 x 1365 mm︱ 165 kg︱
          mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system --------------------------------------- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media --------------------------------------- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ------------------------ The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.
            1860 m³/h
            Pressung 2.900 Pa
            1,1 kW
            filter surface area 10 m²
            72 dB(A)
            400/50 V/Hz
            665 x 820 x 1365 mm
            165 kg
            Description :
            mobile extraction, welding fume extraction
            (manual cleaning by loss of pressure)

            - Hose arm 3 m, joints inside
            - Filter cartridge: dust class M
            - Particle pre-separator: baffle plate
            - Current type: 3Ph+N+PE

            The filter system
            ---------------------------------------
            The mobile filter system of the type StrongMaster IFA is particularly suitable
            for Welding work with unalloyed and alloyed steels, galvanized material and
            Aluminum in case of heavy smoke development. She corresponds to the
            Safety requirements for devices in the welding fume class
            "W3" (high-alloy steels with alloy components > 30%
            nickel-based alloy). When used as intended, the system can be used for
            be used in the recirculation mode, since the requirements for the
            Exceptions according to TRGS 560 are fulfilled. The filter will
            via a maintenance door using a compressed air gun from the clean air side
            cleaned. The cleaned particles fall into a dust collection drawer from the
            they can then be disposed of. The powerful scroll fan
            ensures a high volume flow even with saturated filter cartridges.

            The filter media
            ---------------------------------------
            A baffle serves as a pre-separator for coarse particles.
            The filter cartridge installed below (dust class M, degree of separation > 99%)
            filters the finest smoke and dust particles. The cartridge is factory
            coated which increases the service life.

            The extraction arm
            ------------------------
            The extraction arm can be moved with the 3 internal joints
            Position spring support slightly and is in the set position
            cantilevered. A throttle flap integrated in the extraction hood enables the
            Flow rate setting.
          Datasheet
          Request / Contact
          used Other attachments Suction TEKA WNA 7500 A


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3810005 · Suction

          TEKA - WNA 7500 A - - 2011 -

          Technical details
          6500 m³/h︱ 2700 Pa︱power capacity 7,5 kW︱water consumption 15 l/h︱weight 750 kg︱dimensions 1500 x 1800 x 3300 mm︱
            6500 m³/h
            2700 Pa
            power capacity 7,5 kW
            water consumption 15 l/h
            weight 750 kg
            dimensions 1500 x 1800 x 3300 mm
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  49779 - Niederlangen Fresenburger Weg 4 Deutschland


          Contact Trader


            Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik
           Fresenburger Weg 4
            49779 - Niederlangen
            Deutschland
            +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
            maschinen@heinz-sanders.de
            www.heinz-sanders.de
            Contact person:
          Frau Christine Fokken +49 (0) 5939 9406 40

           




          Machine category


          · Abkantpresse - hydraulisch · Absaugung · Airless- und Farbspritzgerät · Arbeitsbühne · Ausklinkmaschine · Bandschleifmaschine · Bandsäge · Bandsäge - Vertikal · Bearbeitungszentrum · Behälterdrehvorrichtung · Bettfräsmaschine - Universal · Bettfräsmaschine - Vertikal · Biegemaschine horizontal · Blechbiegemaschine - 3 Walzen · Blechrichtmaschinen · Bohrerschleifmaschine · Brennschneidemaschine · Bügelsäge · CNC Drehmaschine · Container · Doppelgehrungssäge · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Drehmaschine-konventionell-elektronisch · Einständerpresse - Hydraulisch · Entgratmaschine · Fräsmaschine - Universal · Funiermaschine · Gabelhubwagen Hand · Gabelstapler · Gewindeschneidmaschine · Gleitschleifanlage · Handhebel-Schere · Handwerkzeuge · Hubwagen - Elektro · Kaltkreissäge · Kehrmaschine · Kettenzug - elektrisch · Kompressoren · Koordinatenbohrmaschine · Laserschneidmaschine · Lochstanze · Messplatte · Nutenfräsmaschine - Vertikal · Nutenziehmaschine · Papierpresse · Positionierer · Profilstahlschere - Kombiniert · Punktschweißmaschine · Radialbohrmaschine · Reinigungsanlage · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Sandstrahlanlage · Scherenhubtisch · Schraubenkompressor · Schweißdrehtisch · Schweißdrehtisch - rund · Schweißroboter · Schweißtisch · Schwenkbiegemaschine · Schwerlastanhänger · Schwerlastregal · Sicken- und Bördelmaschine · Sonstige Lagertechnik · Spannfutter · Spritzgerät · Stromaggregat · Säge- und Bohranlage · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Transportwagen · Unterstellbock · Vakuum-Lifter · Wasserstrahlschneidanlage · Werkbank · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeugschrank ·