cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱capacity 45 degrees: flat 220 x 200 mm︱capacity 45 degrees: round 230 mm︱capacity 45 degrees: square 200 x 200 mm︱capacity 60 degrees: flat 140 x 100 mm︱capacity 60 degrees: square 100 x 100 mm︱capacity 60 degrees: round 150 mm︱vice 285 mm︱turning speed range: 36/72 m/min︱dimensions of saw-band 2950x27x0,9 mm︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 460 kg︱

---

** Current new price 12.500 euros Furnishing: - semi-automatic band saw machine - with miter device 45° right - 60° left - Microprocessor control EVO to control all functions - with both. Miter device, adjustable via large turntable - either manual or automatic lowering of the saw arch - BI-metal saw band - Cooling device - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Raise the saw frame - Open the vice * Machinevideo : https://www.youtube.com/watch?v=qATZQjTvwnY

cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱capacity 45 degrees: flat 220 x 200 mm︱capacity 45 degrees: round 230 mm︱capacity 45 degrees: square 200 x 200 mm︱capacity 60 degrees: flat 140 x 100 mm︱capacity 60 degrees: square 100 x 100 mm︱capacity 60 degrees: round 150 mm︱vice 285 mm︱turning speed range: 36/72 m/min︱dimensions of saw-band 2950 x 27 x 0,9 mm︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 460 kg︱dimensions of the machine ca. 1150 x 1970 mm︱

---

Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - optionally manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German ** Special accessories included: - MEP LubeCut microdosing device Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick

cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 x 250 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 60 degrees: square 170 x 170 mm︱capacity 60 degrees: round 180 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3650 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱

---

Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick

cutting diameter 330 mm︱capacity 90 degrees: flat 510 x 320 mm︱capacity 90 degrees: square 320 x 320 mm︱capacity 45 degrees: flat 350 x 320 mm︱capacity 45 degrees: round 320 mm︱capacity 45 degrees: square 300 x 300 mm︱capacity 60 degrees: flat 230 x 310 mm︱capacity 60 degrees: square 200 x 200 mm︱capacity 60 degrees: round 200 mm︱turning speed range: 15 - 100 m/min︱dimensions of saw-band 4640 x 34 x 1,1 mm︱engine output 4,0 kW︱weight 1190 kg︱

---

Furnishing: - Miter band saw / semi-automatic, for cuts Left up to 60 ° / right up to 60 ° - autom. Saw bow lowering, infinitely adjustable Feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick Fig. Shows a similar machine

cutting diameter 250 mm︱capacity 90 degrees: flat 280 x 220 mm︱capacity 90 degrees: square 220 x 220 mm︱capacity 45 degrees: flat 220 x 200 mm︱capacity 45 degrees: round 230 mm︱capacity 45 degrees: square 200 x 200 mm︱capacity 60 degrees: flat 140 x 100 mm︱capacity 60 degrees: square 100 x 100 mm︱capacity 60 degrees: round 150 mm︱vice 285 mm︱turning speed range: 36/72 m/min︱dimensions of saw-band 2950x27x0,9 mm︱total power requirement 1,5 / 1,8 kW︱weight of the machine ca. 460 kg︱dimensions of the machine ca. 1150 x 1970 mm︱

---

Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - either manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick

cutting diameter 280 mm︱capacity 90 degrees: flat 380 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: flat 300 x 200 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 x 250 mm︱capacity 60 degrees: flat 200 x 170 mm︱capacity 60 degrees: square 170 x 170 mm︱capacity 60 degrees: round 180 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3440 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱dimensions of the machine ca. 1647 x 2157 mm︱weight 720 kg︱

---

Furnishing: - Miter band saw / semi-automatic, for cuts Left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Open the brow stick Control modes: - Manual mode - Semi-automatic dynamic operation - The semi-automatic cut is made by manually approaching the saw bow started in any position by actuating the hand switch - Semi-automatic operation (start / stop position of the saw bow is over the keyboard programmed, vice closes / opens automatically, the saw arch is automatically guided back to the start of the cut)

cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 x 250 mm︱capacity 60 degrees: flat 170 x 170 mm︱capacity 60 degrees: square 170 x 170 mm︱capacity 60 degrees: round 180 mm︱turning speed range: 40 / 80 m/min︱dimensions of saw-band 3650 x 27 x 0,9 mm︱engine output 1,5 / 1,8 kW︱weight 670 kg︱

---

Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German ** Special accessories included: - MEP LubeCut microdosing device Functionality of semi-automatic operation: - Clamping the vice - Hydraulic lowering of the saw frame - Lifting the saw frame - Opening the browstick

cutting diameter 120 mm︱saw blade diameter 370 mm︱vice 190 mm︱capacity 90 degrees: flat 180 x 95 mm︱capacity 45 degrees: round 110 mm︱capacity 45 degrees: flat 125 x 95 mm︱capacity 60 degrees: round 90,0 mm︱capacity 60 degrees: flat 90 x 95 mm︱dimensions of saw-blade 370 x 32 x 2,5 mm︱cutting speed 15 - 150 m/min︱engine output 3,0 kW︱weight 640 kg︱range L-W-H 900 x 1500 x 1910 mm︱

---

** New price ~ 16.000 euros Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual

sheet width 2020 mm︱plate thickness 2.0 mm ST︱thickness at "Niro-steel" 1.25 mm︱bending angle max. 135 °︱stroke of upper beam 120 mm︱adjustment UW 25.0 mm︱Control CFB 120 ︱voltage 400 V︱total power requirement 2.0 kW︱weight of the machine ca. 1410 kg.︱dimensions of the machine ca. 2930 x 2200 x 1175 mm︱

---

** new condition (!!) ** New price at the time including accessories was approx. 35.000 euros ** Special price on request SCHRÖDER bending beam drive enables high forces and moments Efficiency. This means significantly reduced drive power lower energy consumption, but with increasing speed and Running - dynamics. The upper beam drive designed in the middle enables balanced torque distribution across the entire drive unit. The completely closed drive and guide units almost maintenance and wear-free operation. The regulation of the individual Drive axles are basically with a high quality parameter switchable frequency converter implemented. The CNC graphics control is combined with servo drives, which are optimized by the Power utilization results in a significant increase in speed and power. Furnishing: - SCHRÖDER CNC control CFP 120 * Simple and clear program creation * Enter data via 12" LCD touch screen (swivelable) * Program set consisting of: Sheet thickness in mm or inches Opening width of the upper beam in mm or inches Bend angle Bend angle correction Dimension of the back gauge * The following languages are possible: German Dutch Russian English Finnish Swedish French Romanian Danish Czech * Tool library * PLC control program * Tool position memory for each program * max. 99 cycles per bending set * Information aids such as actual value display / error display etc. * EMERGENCY stop button at the front - very high travel speeds of all controlled axes - CNC electro-motorized back gauge, with sheet metal support surface * Sheet metal support surface made of stainless steel (special accessory) - manual bending beam adjustment.. max. 25.0 mm - SCHRÖDER bending tool set - 1x freely movable double foot switch - Connection cable including power plug - Control cabinet installed on the side - 2x transport hooks for hanging the machine - original instruction manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355203 * Machinevideo : https://www.youtube.com/watch?v=aF02-YTP4y8

sheet width 3220 mm︱plate thickness 3,0 mm ST︱thickness at "Niro-steel" 2,0 mm︱daylight opening OW 300 mm︱speed OW 100 mm/sec︱adjustment BW 80,0 mm︱speed BW 120 Grad/sec︱back stop - adjustable k.A. mm︱speed HA 300 mm/sec︱compressed air 6,0 bar︱work height max. 869 mm︱voltage 400 V︱total power requirement 8,8 kW︱weight 5600 kg︱range L-W-H 4575 x 2450 x 1737 mm︱

---

** current new price ~ 220.000 euros ** from a maintenance workshop Furnishing: - motorized universal folding machine * High-precision mechanics with modern control technology * for individual and series production * Robust high-speed runner with high axis speeds * Torsion-free welded construction - rotating upper beam / as an automatic tool changing system * with 2x tool stations (sharp and goat's foot bending rail) * Reduces setup and idle times * Saves time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * with touchscreen control panel, pivotable at the front right * Color display * USB interface * automatic crop calculation * Materials and tools library * Dimensionally accurate bending simulation * Windows XP operating system * swiveling operation, right front - Servo inverter controlled drives * for bending/upper beam beam & electric. backgauge - CNC motorized lower beam adjustment - CNC electric back gauge * Travel speed 300 mm/sec. - with divided / rear sheet metal support surface, including ball rollers - freely movable double foot switch - original instruction manual **Special accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool goat's foot rail - rear side stop (workpiece guide) - rear sheet metal support table made of stainless steel, with ball rollers - pneumatically lowerable back gauge fingers - CNC motorized lower beam adjustment * Machine video: https://www.youtube.com/watch?v=6BV1k5KMoJo * NUMBER OF HOURS: X AXIS .. Total running time 29.470 .. Axis running time 2098 Y AXIS .. Total running time 29.514 .. Axis running time 3728 Z AXIS .. Total running time 29.516 .. Axis running time 9083

sheet width 3220 mm︱plate thickness 2,0 mm︱daylight opening 160 mm︱adjustment 80,0 mm︱bending angle max. 120 °︱total power requirement 4,0 kW︱weight 3.965 kg︱range L-W-H 4575 x 2450 x 1550 mm︱

---

Furnishing: - Motorized universal folding machine * for single and series production - rotating upper beam / as an automatic tool changing system * Reduces set-up and idle times - SCHRÖDER CNC control model POS 2000 * with touch screen control panel (without function) * Color display * USB interface * automatic cutting calculation * Materials and tools library * precise bending simulation - Servo converter controlled drives * for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electrically movable backgauge - with rear sheet metal support surface, including ball casters - Bending/upper tools : * Station 1: 1x pointed rail * Station 2: 1x split goat foot tool - Free-moving double foot switch - Operation manual * Machinevideo : https://www.youtube.com/watch?v=2sxnch6uZa4

sheet width 2030 mm︱plate thickness 4,0 mm︱thickness at "Niro-steel" 2,5 mm︱no. of strokes 34 Hub/min︱cutting angle 2,5 Grad︱table height 820 mm︱distance between columns 2340 mm︱Control POS 100 ︱back stop - adjustable max. 750 mm︱engine output 6,8 kW︱weight of the machine ca. 2860 kg.︱range L-W-H 2870 x 2070 x 1400 mm︱

---

** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325303 * Machinevideo : https://www.youtube.com/watch?v=5w-LdgCg6J8