'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Schmeisser Werkzeugmaschinen - Stockist for used machines

          Machinelist:


          Bandsaw - Horizontal

          used  Bandsaw - Horizontal ZIMMER Z 100/R


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04552 · Bandsaw - Horizontal

          ZIMMER - Z 100/R - - 2019 -

          Technical details
          cutting diameter 105 mm︱saw band length 1140 x 13 x 0,65 mm︱cutting width 100/100x105 mm︱capacity 60 degrees: round mm︱capacity 45 degrees: flat 55 x 55 mm︱capacity 45 degrees: round 60 mm︱total power requirement 0,18 kW︱weight of the machine ca. 18 kg︱dimensions of the machine ca. ca.400 x 300 x 350 mm︱
          We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use.
            cutting diameter 105 mm
            saw band length 1140 x 13 x 0,65 mm
            cutting width 100/100x105 mm
            capacity 45 degrees: flat 55 x 55 mm
            capacity 45 degrees: round 60 mm
            total power requirement 0,18 kW
            weight of the machine ca. 18 kg
            dimensions of the machine ca. ca.400 x 300 x 350 mm
            Description :
            We must ask you to request machines from us on a daily basis in the near future.
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.



            Gear drive, automatic belt tension, electronically adjustable
            Belt speed from 20 to 100 m / min
            Due to the light aluminum housing, the machine is very light and therefore good
            mobile use.
          Datasheet
          Request / Contact
          used  Bandsaw - Horizontal ZIMMER Z185/R


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04495 · Bandsaw - Horizontal

          ZIMMER - Z185/R - - -

          Technical details
          cutting diameter 185 mm︱saw band length 2.080 x 20 x 0,90 mm︱cutting width 100x185 mm︱connected load frequency 230 V︱band speed 35 und 70 stufenlos m/min︱mitre joint 90° (angle-iron till) 60 °︱total power requirement 2,35 KW︱weight of the machine ca. 195 kg︱dimensions of the machine ca. 1280 x 550 x 1480 mm︱
          We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw arm remains in the desired position. * Metal band saw with stepless electronic speed regulation and automatic lowering * Selector switch for hydraulically controlled or manual belt arm lowering * Saw arm can be swiveled up to 60 ° to the right * Quick release vice * Tape guide with 8 ball bearings * Hydraulic saw band tensioning with tensioning pressure display and cut off of the band breakage * including coolant device * including machine base cabinet The Z185 / R has the following standard equipment: - hydraulic cylinders - emulsion pump - eccentric clamp - underframe - saw band The machine is fully assembled and delivered immediately ready for use Technical specifications: Motor power: 230 V / 2.35 kW Cutting speed: 30 - 75 m / min. stepless Saw band dimensions: 2.085 x 20x 0.9 mm Footprint: 550 x 1,280 x 1,480 mm Working height: 915 mm Weight: 190 kg
            cutting diameter 185 mm
            saw band length 2.080 x 20 x 0,90 mm
            cutting width 100x185 mm
            connected load frequency 230 V
            band speed 35 und 70 stufenlos m/min
            mitre joint 90° (angle-iron til. 60 °
            total power requirement 2,35 KW
            weight of the machine ca. 195 kg
            dimensions of the machine ca. 1280 x 550 x 1480 mm
            Description :
            We must ask you to request machines from us on a daily basis in the near future.

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            An inexpensive and powerful band saw for sporadic workshop use

            The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° -
            60 ° left.
            After the cut, the machine stops due to a safety limit switch.
            The lowering is continuously adjustable via a hydraulic system.
            The manual lifting of the saw arm after the cut can - on any
            Position. The saw arm remains in the desired position.

            * Metal band saw with stepless electronic speed regulation and
            automatic lowering
            * Selector switch for hydraulically controlled or manual belt arm lowering
            * Saw arm can be swiveled up to 60 ° to the right
            * Quick release vice
            * Tape guide with 8 ball bearings
            * Hydraulic saw band tensioning with tensioning pressure display and cut off of
            the band breakage
            * including coolant device
            * including machine base cabinet

            The Z185 / R has the following standard equipment:

            - hydraulic cylinders
            - emulsion pump
            - eccentric clamp
            - underframe
            - saw band

            The machine is fully assembled and delivered immediately ready for use

            Technical specifications:
            Motor power: 230 V / 2.35 kW
            Cutting speed: 30 - 75 m / min. stepless
            Saw band dimensions: 2.085 x 20x 0.9 mm
            Footprint: 550 x 1,280 x 1,480 mm
            Working height: 915 mm
            Weight: 190 kg

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Профіль торговця: Schmeisser Werkzeugmaschinen

          Зв'язатися з трейдером



            Верстати Schmeisser
           Lochfelbenstrasse 2
            89312 - Гюнцбург
            Німеччина
            08221-3689630 "> 08221-3689630
            08221-3689632
            info@schmeisser.net
            www.schmeisser.net

          Профіль Трейдера

          Верстати Schmeisser вітають Вас.

          Запрошуємо Вас до нашого сімейного бізнесу, в якому досвід, традиції та інновації створюють цілісний корпоративний імідж.

           

          Ми - Ваш компетентний і надійний партнер у високоякісних свердлильних, фрезерних, токарських і шліфувальних верстатах, незалежно від того, використовуються вони або нові, звичайні або з ЧПУ.

           

          Наші машини працюють так само, як і ми: ефективно і точно. Відповідальні, сумлінні дії щодо наших ділових партнерів, колег та навколишнього середовища є нашим пріоритетом. Команда Schmeisser виступає за компетентність, чесність і справедливість. Все це робить нас сильним, всесвітньо діючим партнером, який зберігає своє слово.

           

          Наша штаб-квартира 2.300 m², розташована в Гуенцбурзі з її просунутими майстернями, складськими та комерційними приміщеннями, пропонує оптимальні умови для задоволення всіх вимог найвищої задоволеності клієнтів. Центральним елементом є наш майстер-майстерня з більш ніж 500 м² і 2-складською системою.

           

          .Використовуються і нові верстати

          .Купівля та продаж

          .Компетентні та комплексні консультації, включаючи старі типи машин

          .Частковий і загальний ремонт

          .Ремонт, огляд та очищення

          .Запасні частини та технічне обслуговування

          .Індивідуальне обладнання машин для задоволення ваших потреб

          .Післяпродажне обслуговування та сервісне обслуговування

          .Швидка та точна бізнес-обробка

          .Придбання повного комплекту обладнання (наприклад, у випадку ліквідації компанії)

          .Фінансування

          .Транспортні рішення та налаштування машин

          .Демонстрація машини в наших комерційних приміщеннях

          .Електричні звіти про випробування

          .Пошук і пошук послуг: ми знайдемо потрібний вам верстат

           

          Ми з нетерпінням чекаємо зустрічі з вами!

          Верстати Schmeisser

          Власник: Ральф Шмайсер

           

          Lochfelbenstrasse 2

          D - 89312 Guenzburg

          Fon + 49 (0) 8221 368 96 30

          Факс + 49 (0) 8221 368 96 32

          E-Mail  




          Schmeisser Werkzeugmaschinen   89312 - Günzburg Lochfelbenstrasse 2 Deutschland
          Schmeisser Werkzeugmaschinen

          Lochfelbenstrasse 2



          Contact Trader


            Schmeisser Werkzeugmaschinen
           Lochfelbenstrasse 2
            89312 - Günzburg
            Deutschland
            08221-3689630
            08221-3689632
            info@schmeisser.net
            www.schmeisser.net
            Contact person:

           




          Machine category


          Bandsäge - horizontal · Bandsäge - Vertikal · Bohrerschleifmaschine · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Leit- und Zugspindeldrehmaschine · Messsystem · Schleifbock · Staubabsaugung · Säulenbohrmaschine · Tischbohrmaschine · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal · Zubehör ·