'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Bästlein Gebrauchtmaschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Machining Center - Vertical

          used  Machining Center - Vertical BRIDGEPORT VMC 600


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-1030252 · Machining Center - Vertical

          BRIDGEPORT - VMC 600 - - 2002 - SIEMENS 810 shopmill

          Technical details
          x-travel 600 mm︱y-travel 410 mm︱z-travel 520 mm︱Spindle Speed 8000 U/min.︱table length 840 mm︱table width 420 mm︱engine output 15 kW︱tool change unit 16 ︱control SIEMENS 810 shopmill ︱rapid traverse X- and Y-axis 36 m/min︱rapid traverse Z-axis 20 m/min︱taper ISO SK 40 ︱dimensions 2200x2300x2300 mm︱weight 2500 kg︱
            x-travel 600 mm
            y-travel 410 mm
            z-travel 520 mm
            Spindle Speed 8000 U/min.
            table length 840 mm
            table width 420 mm
            engine output 15 kW
            tool change unit 16
            control SIEMENS 810 shopmill
            rapid traverse X- and Y-axis 36 m/min
            rapid traverse Z-axis 20 m/min
            taper ISO SK 40
            dimensions 2200x2300x2300 mm
            weight 2500 kg
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine ALZMETALL AX 3/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010618 · Pillar Drilling Machine

          ALZMETALL - AX 3/SV - - Neu -

          Technical details
          40 mm︱ M 24M 30 ︱spindle turning speed - stepless 160-2250 U/min︱ MK 3 ︱spindle stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 515x360 mm︱distance spindle /table min./max. 117/701 mm︱ 2 x 14 x 224 mm︱feed 0,1 + 0,2 mm/U︱Machine height 1840 mm︱
          Standard equipment: - Main switch with motor protection switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed) Pos. 24 Coolant device A, consisting of: Coolant base plate with machined Workpiece support surface 320x320 mm and 2 T-slots, pump with Motor protection switch, complete fitting
            40 mm
            M 24
            M 30
            spindle turning speed - stepless 160-2250 U/min
            MK 3
            spindle stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            515x360 mm
            distance spindle /table min./max. 117/701 mm
            2 x 14 x 224 mm
            feed 0,1 + 0,2 mm/U
            Machine height 1840 mm
            Description :
            Standard equipment:
            - Main switch with motor protection switch lockable
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads / min., (Tapping power dependent on spindle speed)

            Pos. 24
            Coolant device A, consisting of: Coolant base plate with machined
            Workpiece support surface 320x320 mm and 2 T-slots, pump with
            Motor protection switch, complete fitting
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AB 34 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010594 · Pillar Drilling Machine

          ALZMETALL - AB 34 iTRONIC - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱total power requirement 1,4/2,2 kW︱Machine height 1865 mm︱weight 605 kg︱
          Standard equipment: 7 "" TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch - Machine oil first filling: oil bottle, loose delivery Pos. 20.5 Foot switch, in addition to the thread cutting device for switching the Spindle direction of rotation in the process Pos. 37.5 Technology computer in the display. The technology computer guides you through the Machining task. Determination of the cutting data using the following parameters: Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
            34 mm
            40 mm
            40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            total power requirement 1,4/2,2 kW
            Machine height 1865 mm
            weight 605 kg
            Description :
            Standard equipment:
            7 "" TFT LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6th
            Thread / min (thread cutting performance dependent on spindle speed), thread depth
            adjustable via depth stop and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch
            - Machine oil first filling: oil bottle, loose delivery

            Pos. 20.5
            Foot switch, in addition to the thread cutting device for switching the
            Spindle direction of rotation in the process

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the
            Machining task. Determination of the cutting data using the following parameters:
            Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010330 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 mm︱threading in GG 20 M 30 ︱bore stroke 120 mm︱Short spindle MK 3 ︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24 mm
            threading in GG 20 M 30
            bore stroke 120 mm
            Short spindle MK 3
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            height of the machine 1840 mm
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection

            Pos. 25
            Coolant device B, consisting of: separate container (33l),
            Pump with motor protection switch, complete fitting
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL Alzstar 40 iTRONIC-V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010502 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40 iTRONIC-V - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30 ︱Short spindle MK 3 ︱bore stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: 7 "TFT - LCD display with touch function: manual input of spindle speed Setpoint, speed display actual value, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU Pos. 37.5 Technology computer in the display. The technology computer guides you through the machining task. Determination of the cutting data using the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as setpoint
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            Short spindle MK 3
            bore stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            7 "TFT - LCD display with touch function: manual input of spindle speed
            Setpoint, speed display actual value, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the machining task. Determination of the cutting data using the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as setpoint
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AB 34 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010503 · Pillar Drilling Machine

          ALZMETALL - AB 34 iTRONIC - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱total power requirement 1,4/2,2 kW︱Machine height 1865 mm︱weight 470 kg︱
          Standard equipment: 7 "" TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch - Machine oil first filling: oil bottle, loose delivery Pos. 20.5 Foot switch, in addition to the thread cutting device for switching the Spindle direction of rotation in the process Pos. 37.5 Technology computer in the display. The technology computer guides you through the Machining task. Determination of the cutting data using the following parameters: Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
            34 mm
            40 mm
            40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            total power requirement 1,4/2,2 kW
            Machine height 1865 mm
            weight 470 kg
            Description :
            Standard equipment:
            7 "" TFT LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6th
            Thread / min (thread cutting performance dependent on spindle speed), thread depth
            adjustable via depth stop and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch
            - Machine oil first filling: oil bottle, loose delivery

            Pos. 20.5
            Foot switch, in addition to the thread cutting device for switching the
            Spindle direction of rotation in the process

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the
            Machining task. Determination of the cutting data using the following parameters:
            Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AB 40 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010510 · Pillar Drilling Machine

          ALZMETALL - AB 40 iTRONIC - - Neu -

          Technical details
          40 mm︱bore capacity in cast iron 46 mm︱ 50 mm︱ M 30M36MK 4 ︱throat 300 mm︱ 100-1600 U/min.︱ 615x430 mm︱ 2x14x224 mm︱Distance spindle/table max. 147/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱height of the machine 1885 mm︱drive motor 1,8/2,9 kW︱weight of the machine ca. 450 kg︱
            40 mm
            bore capacity in cast iron 46 mm
            50 mm
            M 30
            M36
            MK 4
            throat 300 mm
            100-1600 U/min.
            615x430 mm
            2x14x224 mm
            Distance spindle/table max. 147/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            height of the machine 1885 mm
            drive motor 1,8/2,9 kW
            weight of the machine ca. 450 kg
            Description :

          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AX 3/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010567 · Pillar Drilling Machine

          ALZMETALL - AX 3/SV - - Neu -

          Technical details
          40 mm︱ M 24M 30 ︱spindle turning speed - stepless 160-2250 U/min︱ MK 3 ︱spindle stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 515x360 mm︱distance spindle /table min./max. 117/701 mm︱ 2 x 14 x 224 mm︱feed 0,1 + 0,2 mm/U︱Machine height 1840 mm︱
          Standard equipment: - Main switch with motor protection switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed) Pos. 24 Coolant device A, consisting of: Coolant base plate with machined Workpiece support surface 320x320 mm and 2 T-slots, pump with Motor protection switch, complete fitting
            40 mm
            M 24
            M 30
            spindle turning speed - stepless 160-2250 U/min
            MK 3
            spindle stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            515x360 mm
            distance spindle /table min./max. 117/701 mm
            2 x 14 x 224 mm
            feed 0,1 + 0,2 mm/U
            Machine height 1840 mm
            Description :
            Standard equipment:
            - Main switch with motor protection switch lockable
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads / min., (Tapping power dependent on spindle speed)

            Pos. 24
            Coolant device A, consisting of: Coolant base plate with machined
            Workpiece support surface 320x320 mm and 2 T-slots, pump with
            Motor protection switch, complete fitting
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AX 3s iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010590 · Pillar Drilling Machine

          ALZMETALL - AX 3s iTRONIC - - NEU -

          Technical details
          bore capacity in steel St 60 25 mm︱Drilling capacity in St 60 30 mm︱threading in St 60 M 16M 20 ︱Short spindle MK 3 ︱spindle stroke 140 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2x14x224 mm︱distance spindle - column min./max. 132/724 mm︱feed von Hand ︱0 stufenlos ︱Spindle Speed 225-4300 U/min.︱engine 1,0/1,6 kW︱voltage 400 V︱
            bore capacity in steel St 60 25 mm
            Drilling capacity in St 60 30 mm
            threading in St 60 M 16
            M 20
            Short spindle MK 3
            spindle stroke 140 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2x14x224 mm
            distance spindle - column min./m. 132/724 mm
            feed von Hand
            0 stufenlos
            Spindle Speed 225-4300 U/min.
            engine 1,0/1,6 kW
            voltage 400 V
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010591 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          40 mm︱ M 24M 30MK 4 ︱bore stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 514x360 mm︱ 2 x 14 x 224 mm︱ 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection
            40 mm
            M 24
            M 30
            MK 4
            bore stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            514x360 mm
            2 x 14 x 224 mm
            117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AX 4/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010528 · Pillar Drilling Machine

          ALZMETALL - AX 4/SV - - Neu -

          Technical details
          55 mm︱ M42M56MK 4 ︱spindle turning speed - stepless 70-2400 U/min︱spindle stroke 140 mm︱throat 300 mm︱column diameter 145 mm︱ 615x430 mm︱distance spindle /table min./max. 150/735 mm︱ 2 x 14 x 224 mm︱feed 0,1 + 0,3 mm/U︱Machine height 1850 mm︱weight 380 kg︱engine output 3 kW︱
          Standard equipment: - Main switch with motor protection switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed)
            55 mm
            M42
            M56
            MK 4
            spindle turning speed - stepless 70-2400 U/min
            spindle stroke 140 mm
            throat 300 mm
            column diameter 145 mm
            615x430 mm
            distance spindle /table min./max. 150/735 mm
            2 x 14 x 224 mm
            feed 0,1 + 0,3 mm/U
            Machine height 1850 mm
            weight 380 kg
            engine output 3 kW
            Description :
            Standard equipment:
            - Main switch with motor protection switch lockable
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads / min., (Tapping power dependent on spindle speed)
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10097 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          40 mm︱ M 24M 30MK 3 ︱bore stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 514x360 mm︱ 2 x 14 x 224 mm︱ 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection
            40 mm
            M 24
            M 30
            MK 3
            bore stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            514x360 mm
            2 x 14 x 224 mm
            117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AX 2 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010572 · Pillar Drilling Machine

          ALZMETALL - AX 2 iTRONIC - - NEU -

          Technical details
          23 mm︱threading in St 60 M14 ︱threading in GG 20 M16MK 2125-2400 U/min.︱spindle stroke 100 mm︱throat 250 mm︱column diameter 90 mm︱ 370x300 mm︱ 2x14x160 mm︱distance spindle /table min./max. 140/670 mm︱ Handkurbel ︱feed von Hand ︱height of the machine 1770 mm︱weight of the machine ca. 180 kg︱
            23 mm
            threading in St 60 M14
            threading in GG 20 M16
            MK 2
            125-2400 U/min.
            spindle stroke 100 mm
            throat 250 mm
            column diameter 90 mm
            370x300 mm
            2x14x160 mm
            distance spindle /table min./max. 140/670 mm
            Handkurbel
            feed von Hand
            height of the machine 1770 mm
            weight of the machine ca. 180 kg
            Description :

          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AB 34/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010669 · Pillar Drilling Machine

          ALZMETALL - AB 34/SV - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱ MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱Machine height 1865 mm︱total power requirement 1,4/2,2 kW︱
          Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection class IP 54 - Motor insulation class "F" - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads/min., (Tapping power dependent on spindle speed) Pos. 25. Coolant device B, consisting of: separate container (33 l), pump with Motor protection switch, complete fitting
            34 mm
            40 mm
            40 mm
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            Machine height 1865 mm
            total power requirement 1,4/2,2 kW
            Description :
            Standard equipment:
            - Electromagnetic feed clutch with overload protection and electrical
            Cross Handle Switches
            - Main switch lockable
            - Motor protection switch
            - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel
            - Speed adjustment stepless
            - Speed display digital
            - Protection class IP 54
            - Motor insulation class "F"
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads/min., (Tapping power dependent on spindle speed)

            Pos. 25.
            Coolant device B, consisting of: separate container (33 l), pump with
            Motor protection switch, complete fitting
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ARBOGA A4008M


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010602 · Pillar Drilling Machine

          ARBOGA - A4008M - - NEU -

          Technical details
          bore capacity in steel (diameter) 40 mm︱bore stroke 190 mm︱turning speeds 50-1800 U/min︱Short spindle MK 4 ︱Table dimensions 500x400 mm︱total power requirement 2,2 kW︱weight of the machine ca. 330 kg︱dimensions of the machine ca. 670x500x2120 mm︱
            bore capacity in steel (diameter. 40 mm
            bore stroke 190 mm
            turning speeds 50-1800 U/min
            Short spindle MK 4
            Table dimensions 500x400 mm
            total power requirement 2,2 kW
            weight of the machine ca. 330 kg
            dimensions of the machine ca. 670x500x2120 mm
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AX 3/S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010623 · Pillar Drilling Machine

          ALZMETALL - AX 3/S - - NEU -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30 ︱Short spindle MK 3 ︱spindle stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2x14x224 mm︱distance spindle /table 117/701 mm︱Spindle Speed 160-2250 U/min.︱weight 260 kg︱
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            Short spindle MK 3
            spindle stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2x14x224 mm
            distance spindle /table 117/701 mm
            Spindle Speed 160-2250 U/min.
            weight 260 kg
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL Alzstar 30/S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010651 · Pillar Drilling Machine

          ALZMETALL - Alzstar 30/S - - Neu -

          Technical details
          Drilling capacity in St 60 30 mm︱threading in St 60 M 16 ︱threading in GG 20 M 20 ︱Short spindle MK 3 ︱bore stroke 140 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 132/724 mm︱feed Hand ︱spindle turning speed range 225-4300 UpM︱total power requirement 1,0/1,6 kW︱height of the machine 1790 mm︱weight of the machine ca. 260 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection
            Drilling capacity in St 60 30 mm
            threading in St 60 M 16
            threading in GG 20 M 20
            Short spindle MK 3
            bore stroke 140 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 132/724 mm
            feed Hand
            spindle turning speed range 225-4300 UpM
            total power requirement 1,0/1,6 kW
            height of the machine 1790 mm
            weight of the machine ca. 260 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AB 34/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010408 · Pillar Drilling Machine

          ALZMETALL - AB 34/SV - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱ MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱Machine height 1865 mm︱total power requirement 1,4/2,2 kW︱
          Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection class IP 54 - Motor insulation class "F" - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads/min., (Tapping power dependent on spindle speed) Pos. 25. Coolant device B, consisting of: separate container (33 l), pump with Motor protection switch, complete fitting
            34 mm
            40 mm
            40 mm
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            Machine height 1865 mm
            total power requirement 1,4/2,2 kW
            Description :
            Standard equipment:
            - Electromagnetic feed clutch with overload protection and electrical
            Cross Handle Switches
            - Main switch lockable
            - Motor protection switch
            - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel
            - Speed adjustment stepless
            - Speed display digital
            - Protection class IP 54
            - Motor insulation class "F"
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads/min., (Tapping power dependent on spindle speed)

            Pos. 25.
            Coolant device B, consisting of: separate container (33 l), pump with
            Motor protection switch, complete fitting
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AX 3 iTRONIC V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010589 · Pillar Drilling Machine

          ALZMETALL - AX 3 iTRONIC V - - NEU -

          Technical details
          40 mm︱threading in St 60 M24 ︱threading in GG 20 M30MK 3160 - 2250 U/min.︱spindle stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 514 x 360 mm︱ 2 x 14 x 224 mm︱distance spindle /table min. 117 / max. 701 mm︱feed 0,1 + 0,2 mm/U︱height of the machine ca. 1840 mm︱weight of the machine ca. ca. 260 kg︱
            40 mm
            threading in St 60 M24
            threading in GG 20 M30
            MK 3
            160 - 2250 U/min.
            spindle stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            514 x 360 mm
            2 x 14 x 224 mm
            distance spindle /table min. 117 / max. 701 mm
            feed 0,1 + 0,2 mm/U
            height of the machine ca. 1840 mm
            weight of the machine ca. ca. 260 kg
            Description :

          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ZIMMER BMS 32 V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010517 · Pillar Drilling Machine

          ZIMMER - BMS 32 V - - Neu -

          Technical details
          32 ︱bore stroke 125 mm︱Short spindle MK 3 ︱throat 210 mm︱Machine table - usable table surface 390x390 mm︱table load 65 kg︱spindle turning speed range 150-2.500 UpM︱Power requirement 16 A︱total power requirement 1,5 kW︱Overall size 750x450x1745 mm︱weight of the machine ca. 187 kg︱
            32
            bore stroke 125 mm
            Short spindle MK 3
            throat 210 mm
            Machine table - usable table sur. 390x390 mm
            table load 65 kg
            spindle turning speed range 150-2.500 UpM
            Power requirement 16 A
            total power requirement 1,5 kW
            Overall size 750x450x1745 mm
            weight of the machine ca. 187 kg
            Description :

          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AB 34 iTRONIC AUTODIGIT


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010551 · Pillar Drilling Machine

          ALZMETALL - AB 34 iTRONIC AUTODIGIT - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱total power requirement 1,4/2,2 kW︱Machine height 1865 mm︱weight 470 kg︱
          Standard equipment: 7 "" TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch - Machine oil first filling: oil bottle, loose delivery Pos. 20.5 Foot switch, in addition to the thread cutting device for switching the Spindle direction of rotation in the process Pos. 37.5 Technology computer in the display. The technology computer guides you through the Machining task. Determination of the cutting data using the following parameters: Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
            34 mm
            40 mm
            40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            total power requirement 1,4/2,2 kW
            Machine height 1865 mm
            weight 470 kg
            Description :
            Standard equipment:
            7 "" TFT LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6th
            Thread / min (thread cutting performance dependent on spindle speed), thread depth
            adjustable via depth stop and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch
            - Machine oil first filling: oil bottle, loose delivery

            Pos. 20.5
            Foot switch, in addition to the thread cutting device for switching the
            Spindle direction of rotation in the process

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the
            Machining task. Determination of the cutting data using the following parameters:
            Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ZIMMER BMS 32


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010518 · Pillar Drilling Machine

          ZIMMER - BMS 32 - - Neu -

          Technical details
          32 ︱bore stroke 125 mm︱Short spindle MK 3 ︱throat 210 mm︱Machine table - usable table surface 390x390 mm︱table load 65 kg︱spindle turning speed range 105-2.650 UpM︱total power requirement 0,75 kW︱Overall size 750x450x1745 mm︱weight of the machine ca. 192 kg︱
            32
            bore stroke 125 mm
            Short spindle MK 3
            throat 210 mm
            Machine table - usable table sur. 390x390 mm
            table load 65 kg
            spindle turning speed range 105-2.650 UpM
            total power requirement 0,75 kW
            Overall size 750x450x1745 mm
            weight of the machine ca. 192 kg
            Description :

          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL Alzstar 30/S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010227 · Pillar Drilling Machine

          ALZMETALL - Alzstar 30/S - - Neu -

          Technical details
          Drilling capacity in St 60 30 mm︱threading in St 60 M 16 ︱threading in GG 20 M 20 ︱Short spindle MK 3 ︱bore stroke 140 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 132/724 mm︱feed Hand ︱spindle turning speed range 225-4300 UpM︱height of the machine 1790 mm︱total power requirement 1,0/1,6 kW︱weight of the machine ca. 260 kg︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection
            Drilling capacity in St 60 30 mm
            threading in St 60 M 16
            threading in GG 20 M 20
            Short spindle MK 3
            bore stroke 140 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 132/724 mm
            feed Hand
            spindle turning speed range 225-4300 UpM
            height of the machine 1790 mm
            total power requirement 1,0/1,6 kW
            weight of the machine ca. 260 kg
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AX 3 iTRONIC V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010593 · Pillar Drilling Machine

          ALZMETALL - AX 3 iTRONIC V - - NEU -

          Technical details
          40 mm︱threading in St 60 M24 ︱threading in GG 20 M30MK 3 ︱spindle stroke 120 mm︱ 160 - 2250 U/min.︱throat 293 mm︱column diameter 115 mm︱ 514 x 360 mm︱ 2 x 14 x 224 mm︱distance spindle /table min. 117 / max. 701 mm︱feed 0,1 + 0,2 mm/U︱height of the machine ca. 1840 mm︱weight of the machine ca. ca. 260 kg︱
          Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6thread/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Feed overload protection - Machine oil initial filling; oil bottle, supplied loose - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black ***SPECIAL EQUIPMENT*** Item 20.5 FOOT SWITCH in addition to the SPINDLE-CUTTING DEVICE, for switching the direction of spindle rotation during the process Item 24 Coolant device A, consisting of: Coolant base plate with machined workpiece support surface 320x320 mm and 2 T-slots, pump with motor protection switch, complete fitting, non-return valve, Switching functions for coolant supply
            40 mm
            threading in St 60 M24
            threading in GG 20 M30
            MK 3
            spindle stroke 120 mm
            160 - 2250 U/min.
            throat 293 mm
            column diameter 115 mm
            514 x 360 mm
            2 x 14 x 224 mm
            distance spindle /table min. 117 / max. 701 mm
            feed 0,1 + 0,2 mm/U
            height of the machine ca. 1840 mm
            weight of the machine ca. ca. 260 kg
            Description :
            Standard equipment:
            - 7" TFT LCD display with touch function:
            * Manual input of spindle speed set value
            * Actual speed display
            * Integrated drilling depth display with touch zero point transfer
            * Virtual drilling depth scale in the display
            * Machine status indicators and warnings on the display
            * Service information
            * Selectable operating language: DE/EN/FR/ES/IT/NL/RU
            - Thread cutting device, for thread cutting with stop, max.
            6thread/min (thread cutting capacity depending on spindle speed), thread depth
            adjustable via depth stop and on the TFT LCD display (4 tools)
            - Infinitely variable speed adjustment via adjustment lever
            - Spindle protection with electrical fuse
            - Three separate buttons for clockwise rotation - anticlockwise rotation - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Clockwise and counter-clockwise rotation via contactor control
            - Control voltage 24 V, protection class IP 54
            - Feed overload protection
            - Machine oil initial filling; oil bottle, supplied loose
            - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black

            ***SPECIAL EQUIPMENT***

            Item 20.5
            FOOT SWITCH in addition to the SPINDLE-CUTTING DEVICE,
            for switching the direction of spindle rotation during the process

            Item 24
            Coolant device A, consisting of:
            Coolant base plate with machined workpiece support surface 320x320 mm and 2
            T-slots, pump with motor protection switch, complete fitting, non-return valve,
            Switching functions for coolant supply
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          •   
          •   

          Bästlein Gebrauchtmaschinenhandel GmbH  89312 - Günzburg Augsburger Str. 56 Deutschland
          Bästlein Gebrauchtmaschinenhandel GmbH

          Augsburger Str. 56



          Contact Trader


            Bästlein Gebrauchtmaschinenhandel GmbH
           Augsburger Str. 56
            89312 - Günzburg
            Deutschland
            +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
            info@baestlein.com
            www.baestlein.com
            Contact person:

           




          Machine category


          4-Säulenpresse - Hydraulisch · Abkantpresse - hydraulisch · Achtkanttisch · Alu-Kreissäge · Ausklinkmaschine · Bandschleifmaschine · Bandsäge · Bandsäge - Automatisch · Bandsäge - Vertikal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Biegemaschine horizontal · Blechbearbeitungsanlagen · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · CNC Drehmaschine · CNC Plasma-Schneidanlage · Entgratmaschine · Exzenterpresse - Einständer · Fräsmaschine · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Gabelhubwagen - von Hand · Gabelstapler - Diesel · Gabelstapler - Elektro · Hobelmaschine · Kaltkreissäge · Kappsäge · Kolbenkompressor · Kreissäge · Kreissäge - Automatisch · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Lochstanze · Mechanikerdrehbank · Presse · Profilstahlschere · Rohrbiegemaschine · Schleifmaschinen · Schweißdrehtisch · Schweißtisch · Schweißtisch-Zubehör · Schwenkbiegemaschine · Sickenmaschine · Spritzgiessmaschine bis 1000 KN · Stanz- und Nibbelmaschine · Stanz-Laser-Kombi · Stanzmaschine - hydraulisch · Strahlanlage · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Werkstattpresse - hydraulisch ·