'
Європейська мережа дилерів акціонерної техніки
+ 49 (0) 2389 5299080
Пошукова служба Продаємо старі машини

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:
             вид: 

              Search: 


             Фільтр:

          Showoffers:
          Build year From:
          1950
          Build year To:
          2022

          1. machine-categorie:

          Machines available immediately

          Machinelist: Machines available immediately

          Band Saw

          used Machines available immediately Band Saw MEBA MEBAswing 320 DG

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010690 · Band Saw

          MEBA - MEBAswing 320 DG - - Neu -

          Technical details
          35/75 m/min︱sawband speed 15-150 m/min︱dimensions of saw-band 4200x34x1,1 mm︱capacity 90 degrees: round 325 mm︱capacity 90 degrees: flat 500x300 mm︱ 300 mm︱ 300x300 mm︱ 200 mm︱ 200x200 mm︱ 300 mm︱ 300x300 mm︱ 85 mm︱ 260 mm︱min. dia. 5 mm︱work height max. 750 mm︱total power requirement 3,0 kW︱dimensions 1450x2200x1400 mm︱
          Equipment / Accessories: - Fast miter adjustment from 30° - 150° stepless, digital Miter indication to 0.1°. - Manual material tension. At each angular position of the saw frame is the Material tightened parallel in 90°. - MEBA - High performance package "HSS" version - Hydraulic lifting and lowering the saw frame and hydraulic clamping of the sawing material Stepless hydraulic cutting pressure and feed regulation Display lowering speed over scale. Display section via pressure gauge. Rapid traverse reduction of the saw frame via pushbutton to material edge - Frequency controlled AC drive 15-150 m / min - 3 kW - Hydraulic material full lift voltage - Machine stand with chip collecting tray - Sägebandantieb with limit switch - Precise saw band carbide roller guide, saw blade brush - Complete coolant device with electric submersible pump
            35/75 m/min
            sawband speed 15-150 m/min
            dimensions of saw-band 4200x34x1,1 mm
            capacity 90 degrees: round 325 mm
            capacity 90 degrees: flat 500x300 mm
            300 mm
            300x300 mm
            200 mm
            200x200 mm
            300 mm
            300x300 mm
            85 mm
            260 mm
            min. dia. 5 mm
            work height max. 750 mm
            total power requirement 3,0 kW
            dimensions 1450x2200x1400 mm
            Description :
            Equipment / Accessories:
            - Fast miter adjustment from 30° - 150° stepless, digital Miter indication to 0.1°.
            - Manual material tension. At each angular position of the saw frame is the
            Material tightened parallel in 90°.
            - MEBA - High performance package "HSS" version - Hydraulic lifting and lowering
            the saw frame and hydraulic clamping of the sawing material
            Stepless hydraulic cutting pressure and feed regulation
            Display lowering speed over scale. Display section via pressure gauge.
            Rapid traverse reduction of the saw frame via pushbutton to material edge
            - Frequency controlled AC drive 15-150 m / min - 3 kW
            - Hydraulic material full lift voltage
            - Machine stand with chip collecting tray
            - Sägebandantieb with limit switch
            - Precise saw band carbide roller guide, saw blade brush
            - Complete coolant device with electric submersible pump


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Band Saw MEBA MEBAswing 260 DG

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010932 · Band Saw

          MEBA - MEBAswing 260 DG - - NEU -

          Technical details
          capacity 90 degrees: round 260 mm︱capacity 90 degrees: flat 300x260 mm︱capacity 45 degrees: round 200 mm︱capacity 45 degrees: flat 180x180 mm︱ 130 mm︱ 120x120 mm︱min. dia. 5 mm︱work height max. 900 mm︱total power requirement 1,1/1,8 kW︱rest piece length 25 mm︱ 35/75 m/min︱dimensions of saw-band 3350x27x0,9 mm︱weight 710 kg︱
          Equipment / Accessories: - Fast miter adjustment from 30° - 150° stepless to 0,5 ° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension. - End stops at 30° + 45° left and 30°+45° right - Manual material tension. At each angular position of the saw frame is the Material stretched parallel in 90° - Cutting pressure reduction by weight of the heavy, torsionally stiff Sawing frame and fine adjustment depending on the material cross section via hydraulic damping cylinder - MEBA micro dosing system complete with spray head - Machine stand with chip collecting tray - saw blade drive with limit stop - Precise saw band carbide roller guide Additional equipment: - Hydraulic lifting of the saw frame
            capacity 90 degrees: round 260 mm
            capacity 90 degrees: flat 300x260 mm
            capacity 45 degrees: round 200 mm
            capacity 45 degrees: flat 180x180 mm
            130 mm
            120x120 mm
            min. dia. 5 mm
            work height max. 900 mm
            total power requirement 1,1/1,8 kW
            rest piece length 25 mm
            35/75 m/min
            dimensions of saw-band 3350x27x0,9 mm
            weight 710 kg
            Description :
            Equipment / Accessories:
            - Fast miter adjustment from 30° - 150° stepless to 0,5 ° accuracy
            according to scale. The miter turning point is the point of intersection between saw band and
            Material system, thereby no change in the length dimension.
            - End stops at 30° + 45° left and 30°+45° right
            - Manual material tension. At each angular position of the saw frame is the
            Material stretched parallel in 90°
            - Cutting pressure reduction by weight of the heavy, torsionally stiff
            Sawing frame and fine adjustment depending on the material cross section via hydraulic
            damping cylinder
            - MEBA micro dosing system complete with spray head
            - Machine stand with chip collecting tray
            - saw blade drive with limit stop
            - Precise saw band carbide roller guide

            Additional equipment:
            - Hydraulic lifting of the saw frame


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Band Saw MEBA MEBAswing 260 DG-HS

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010933 · Band Saw

          MEBA - MEBAswing 260 DG-HS - - NEU -

          Technical details
          35/75 m/min︱dimensions of saw-band 3350x27x0,9 mm︱capacity 90 degrees: round 260 mm︱capacity 90 degrees: flat 300x260 mm︱capacity 45 degrees: round 200 mm︱capacity 45 degrees: flat 180x180 mm︱ 130 mm︱ 120x120 mm︱ 25 mm︱min. dia. 5 mm︱work height max. 900 mm︱weight 710 kg︱dimensions 800x1720x1450 mm︱
          Standard equipment: - Fast miter adjustment by scale - miter turning point is the point of intersection between saw blade and material system, no changes in the length measure - Manual material tension - at each angular position of the saw frame is the Material stretched parallel in 90 ° - Cutting pressure reduction by weight of the heavy, torsionally stiff Sawing frame and fine adjustment depending on the material cross section via hydraulic damping cylinder - Machine stand with chip collecting tray - saw blade drive with limit stop - Precise saw band carbide roller guide Additional standard equipment 260 DG-HS: - Hydraulic lifting of the saw frame - Hydraulic clamping of the saw frame - rapid traverse lowering to upper edge of material
            35/75 m/min
            dimensions of saw-band 3350x27x0,9 mm
            capacity 90 degrees: round 260 mm
            capacity 90 degrees: flat 300x260 mm
            capacity 45 degrees: round 200 mm
            capacity 45 degrees: flat 180x180 mm
            130 mm
            120x120 mm
            25 mm
            min. dia. 5 mm
            work height max. 900 mm
            weight 710 kg
            dimensions 800x1720x1450 mm
            Description :
            Standard equipment:
            - Fast miter adjustment by scale
            - miter turning point is the point of intersection between saw blade and material system,
            no changes in the length measure
            - Manual material tension - at each angular position of the saw frame is the
            Material stretched parallel in 90 °
            - Cutting pressure reduction by weight of the heavy, torsionally stiff
            Sawing frame and fine adjustment depending on the material cross section via hydraulic
            damping cylinder
            - Machine stand with chip collecting tray
            - saw blade drive with limit stop
            - Precise saw band carbide roller guide

            Additional standard equipment 260 DG-HS:
            - Hydraulic lifting of the saw frame
            - Hydraulic clamping of the saw frame
            - rapid traverse lowering to upper edge of material


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Band Saw MEBA MEBAswing 320 G-HSS

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010821 · Band Saw

          MEBA - MEBAswing 320 G-HSS - - Neu -

          Technical details
          15-150 m/min︱capacity 90 degrees: round 325 mm︱capacity 90 degrees: flat 500 x 300 mm︱capacity 45 degrees: round 300 mm︱capacity 45 degrees: flat 300 x 300 mm︱ 200 mm︱ 200 x 200 mm︱dimensions of saw-band 4200 x 34 x 1,1 mm︱ 60 mm︱ 165 mm︱min. dia. 5 mm︱work height max. 750 mm︱total power requirement 3 kW︱dimensions 1300 x 2050 x 1400 mm︱weight 910 kg︱
          Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high performance package version "HSS": Hydraulic lifting and lowering of the Sawing frame and hydraulic clamping of the sawing material. stepless hydraulic cutting and feed regulation. Display lowering speed about scale. Display of cutting pressure via pressure gauge. Rapid traverse reduction of the Sawing frame via pushbutton to material edge - Frequency-controlled AC drive 15-150 m / min, 3 kW - Hydraulic material full lift voltage - Hydraulic lifting and lowering of the saw frame - Hydraulic clamping of the material
            15-150 m/min
            capacity 90 degrees: round 325 mm
            capacity 90 degrees: flat 500 x 300 mm
            capacity 45 degrees: round 300 mm
            capacity 45 degrees: flat 300 x 300 mm
            200 mm
            200 x 200 mm
            dimensions of saw-band 4200 x 34 x 1,1 mm
            60 mm
            165 mm
            min. dia. 5 mm
            work height max. 750 mm
            total power requirement 3 kW
            dimensions 1300 x 2050 x 1400 mm
            weight 910 kg
            Description :
            Standard equipment:
            - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy
            according to scale. The miter turning point is the point of intersection between saw band and
            Material system, thereby no change in the length dimension
            - At each angular position of the saw frame, the material is parallel in 90°
            tightened
            - Complete coolant device with electric submersible pump
            - Machine stand with chip collecting tray
            - Precise saw band carbide roller guide, saw blade brush
            - 1 saw blade on machine 4-6 ZpZ
            - MEBA high performance package version "HSS": Hydraulic lifting and lowering of the
            Sawing frame and hydraulic clamping of the sawing material. stepless
            hydraulic cutting and feed regulation. Display lowering speed
            about scale. Display of cutting pressure via pressure gauge. Rapid traverse reduction of the
            Sawing frame via pushbutton to material edge
            - Frequency-controlled AC drive 15-150 m / min, 3 kW
            - Hydraulic material full lift voltage
            - Hydraulic lifting and lowering of the saw frame
            - Hydraulic clamping of the material


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Band Saw MEBA MEBAeco 335 DG

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010891 · Band Saw

          MEBA - MEBAeco 335 DG - - NEU -

          Technical details
          saw band length 4400 x 34 x 1,1 mm︱band speed 15 - 150 m/min︱capacity 90 degrees: round 335 mm︱capacity 90 degrees: square 500 x 335 mm︱ 330 mm︱ 320 x 335 mm︱ 305 mm︱ 305 x 335 mm︱ 180 mm︱ 170 x 335 mm︱work height max. 750 mm︱Motor Capacity 3 kW︱machine weight ab. 1320 kg︱dimensions 1450 x 2350 x 1950 mm︱
            saw band length 4400 x 34 x 1,1 mm
            band speed 15 - 150 m/min
            capacity 90 degrees: round 335 mm
            capacity 90 degrees: square 500 x 335 mm
            330 mm
            320 x 335 mm
            305 mm
            305 x 335 mm
            180 mm
            170 x 335 mm
            work height max. 750 mm
            Motor Capacity 3 kW
            machine weight ab. 1320 kg
            dimensions 1450 x 2350 x 1950 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Band Saw MEBA MEBAratio 200 G

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010956 · Band Saw

          MEBA - MEBAratio 200 G - - 2013 -

          Technical details
          dimensions of saw-band 4100 x 27 x 0,9 mm︱capacity 90 degrees: round 200 mm︱capacity 90 degrees: flat 200 x 200 mm︱capacity 45 degrees: flat 180 x 200 mm︱capacity 45 degrees: round 180 mm︱capacity 30 degrees: round 90 mm︱capacity 30 degrees: flat 90 x 200 mm︱cutting speed max. 75 m/min︱down speed 0 - 250 mm/min︱total power requirement mind. 2,7 kW︱table height 750 mm︱coolant pump 0,12 kW︱machine weight ab. 1.120 kg︱
            dimensions of saw-band 4100 x 27 x 0,9 mm
            capacity 90 degrees: round 200 mm
            capacity 90 degrees: flat 200 x 200 mm
            capacity 45 degrees: flat 180 x 200 mm
            capacity 45 degrees: round 180 mm
            capacity 30 degrees: round 90 mm
            capacity 30 degrees: flat 90 x 200 mm
            cutting speed max. 75 m/min
            down speed 0 - 250 mm/min
            total power requirement mind. 2,7 kW
            table height 750 mm
            coolant pump 0,12 kW
            machine weight ab. 1.120 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact

          Band Saw - Automatic

          used Machines available immediately Band Saw - Automatic MEBA MEBAeco 335 DGA-1000

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010942 · Band Saw - Automatic

          MEBA - MEBAeco 335 DGA-1000 - - Neu -

          Technical details
          dimensions of saw-band 4400x34x1,1 mm︱ 305 mm︱ 305x335 mm︱capacity 90 degrees: round 335 mm︱capacity 90 degrees: flat 500x335 mm︱ 330 mm︱ 305x335 mm︱ 180 mm︱ 170x335 mm︱work height max. 750 mm︱rest piece length man./autom. 80/300 mm︱ 1000 / 9999 mm︱ 15-150 m/min︱Weight 2020 kg︱
          Standard equipment: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m / min - Hydraulic material full lift voltage - Automatic procedure of the vices - Minimum speed and saw blade monitoring - Electric miter turning via servo motor - Visualized program input with CNC control - Material insertion via servo-controlled ball screw drive
            dimensions of saw-band 4400x34x1,1 mm
            305 mm
            305x335 mm
            capacity 90 degrees: round 335 mm
            capacity 90 degrees: flat 500x335 mm
            330 mm
            305x335 mm
            180 mm
            170x335 mm
            work height max. 750 mm
            rest piece length man./autom. 80/300 mm
            1000 / 9999 mm
            15-150 m/min
            Weight 2020 kg
            Description :
            Standard equipment:
            - Automatic cutting pressure and feed monitoring
            - Frequency-controlled AC drive 15-150 m / min
            - Hydraulic material full lift voltage
            - Automatic procedure of the vices
            - Minimum speed and saw blade monitoring
            - Electric miter turning via servo motor
            - Visualized program input with CNC control
            - Material insertion via servo-controlled ball screw drive


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Band Saw - Automatic MEBA MEBAeco 335 DGA-600

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010722 · Band Saw - Automatic

          MEBA - MEBAeco 335 DGA-600 - - Neu -

          Technical details
          15-150 m/min︱dimensions of saw-band 4400x34x1,1 mm︱ 305 mm︱ 305x335 mm︱capacity 90 degrees: round 335 mm︱capacity 90 degrees: flat 500x335 mm︱ 330 mm︱ 320x335 mm︱ 180 mm︱ 170x335 mm︱ 300 mm︱ 80 mm︱min. dia. 5 mm︱work height max. 750 mm︱total power requirement 3 kW AC︱Weight 2020 kg︱dimensions 5350x2300x2000 mm︱
          Standard equipment: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m / min - Hydraulic material full lift voltage - Automatic procedure of the vices - Minimum speed and saw blade monitoring - Electric miter turning via servo motor - Visualized program input with CNC control - Material insertion via servo-controlled ball screw drive
            15-150 m/min
            dimensions of saw-band 4400x34x1,1 mm
            305 mm
            305x335 mm
            capacity 90 degrees: round 335 mm
            capacity 90 degrees: flat 500x335 mm
            330 mm
            320x335 mm
            180 mm
            170x335 mm
            300 mm
            80 mm
            min. dia. 5 mm
            work height max. 750 mm
            total power requirement 3 kW AC
            Weight 2020 kg
            dimensions 5350x2300x2000 mm
            Description :
            Standard equipment:
            - Automatic cutting pressure and feed monitoring
            - Frequency-controlled AC drive 15-150 m / min
            - Hydraulic material full lift voltage
            - Automatic procedure of the vices
            - Minimum speed and saw blade monitoring
            - Electric miter turning via servo motor
            - Visualized program input with CNC control
            - Material insertion via servo-controlled ball screw drive


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Band Saw - Automatic MEBA MEBAeco 335A

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010968 · Band Saw - Automatic

          MEBA - MEBAeco 335A - - 2009 -

          Technical details
          cutting diameter 335 mm︱dimensions of saw-band 4400x34x1,1 mm︱table height 750 mm︱min. dia. 5 mm︱capacity 90 degrees: round 335 mm︱capacity 90 degrees: flat 500x335 mm︱cutting speed 15-150 m/min︱clamping range bunching voltage 0-500 / 15-335 Breite / Höhe︱ 0-600 / 0-6000 Einf. / Mehrf.︱weight of the machine ca. 1600 kg︱dimensions of the machine ca. 2230x2350x1900 mm︱
            cutting diameter 335 mm
            dimensions of saw-band 4400x34x1,1 mm
            table height 750 mm
            min. dia. 5 mm
            capacity 90 degrees: round 335 mm
            capacity 90 degrees: flat 500x335 mm
            cutting speed 15-150 m/min
            clamping range bunching voltage 0-500 / 15-335 Breite / Höhe
            0-600 / 0-6000 Einf. / Mehrf.
            weight of the machine ca. 1600 kg
            dimensions of the machine ca. 2230x2350x1900 mm


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Band Saw - Automatic MEBA 410A-2300

          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland
          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010937 · Band Saw - Automatic

          MEBA - 410A-2300 - - 2003 -

          Technical details
          capacity 90 degrees: round 410 mm︱capacity 90 degrees: flat 620x410 mm︱rest piece length man./autom. 30 /160 mm︱work height max. 750 mm︱sawband speed 15-150 m/mm︱dimensions of saw-band 5800x41x1,3 mm︱total power requirement 9,0 kW︱weight of the machine ca. 3210 kg︱
            capacity 90 degrees: round 410 mm
            capacity 90 degrees: flat 620x410 mm
            rest piece length man./autom. 30 /160 mm
            work height max. 750 mm
            sawband speed 15-150 m/mm
            dimensions of saw-band 5800x41x1,3 mm
            total power requirement 9,0 kW
            weight of the machine ca. 3210 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

          • Datasheet
          Request / Contact

          Band Saw - Automatic - Horizontal

          used Machines available immediately Band Saw - Automatic - Horizontal MEBA 280 A

          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland
          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20002 · Band Saw - Automatic - Horizontal

          MEBA - 280 A - - 1995 -

          Technical details
          cutting diameter 280 mm︱saw band length 4200 mm︱cutting width 280 x 280 mm︱dimensions of saw-band 4200 x 34 x 1,1 mm︱cutting speed 18 - 115 m/min︱multiple feeding 0 - 6000 mm︱power capacity 3,0 kW︱coolant ︱voltage 400 V︱total power requirement 5,0 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2,35 x 2,40 x 2,00 m︱
          - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment
            cutting diameter 280 mm
            saw band length 4200 mm
            cutting width 280 x 280 mm
            dimensions of saw-band 4200 x 34 x 1,1 mm
            cutting speed 18 - 115 m/min
            multiple feeding 0 - 6000 mm
            power capacity 3,0 kW
            voltage 400 V
            total power requirement 5,0 kW
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2,35 x 2,40 x 2,00 m
            Description :
            - serial-no.: 6082
            - control: SIEMENS COROS - OP 15
            - chip conveyor
            - multiple feeding
            - coolant equipment



        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Band Saw - Automatic - Horizontal MEBA 420 GA

          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland
          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02805 · Band Saw - Automatic - Horizontal

          MEBA - 420 GA - - 1987 -

          Technical details
          cutting diameter 420 mm︱saw band length 0 mm︱cutting width 0 mm︱total power requirement kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. m︱
            cutting diameter 420 mm
            weight of the machine ca. 1 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

          • Datasheet
          Request / Contact

          Bandsaw - Horizontal

          used Machines available immediately Bandsaw - Horizontal MEBA Eco 335 DG

          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland
          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-ZA411 · Bandsaw - Horizontal

          MEBA - Eco 335 DG - - 2012 -

          Technical details
          cutting diameter - mm︱saw band length - mm︱cutting width - mm︱capacity 335 mm︱dimensions of the machine ca. 1.500 x 2.100 x 1.800 m︱
          Brand Meba Type Eco 335 DG Year of make 2012 Horizontal Semi-automatic Capacity around 335 mm Capacity rectangular 335 x 400 mm Absent +60 / -45 ° Variably adjustable speed Hydraulic clamping Hydraulic lowering Machine size (lxwxh) 1.500 x 2.100 x 1.800 mm
            cutting diameter - mm
            saw band length - mm
            cutting width - mm
            capacity 335 mm
            dimensions of the machine ca. 1.500 x 2.100 x 1.800 m
            Description :
            Brand Meba
            Type Eco 335 DG
            Year of make 2012
            Horizontal
            Semi-automatic
            Capacity around 335 mm
            Capacity rectangular 335 x 400 mm
            Absent +60 / -45 °
            Variably adjustable speed
            Hydraulic clamping
            Hydraulic lowering
            Machine size (lxwxh) 1.500 x 2.100 x 1.800 mm


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

          • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Machines available immediately Hydr. pressbrake DARLEY EHP-LS 320.32/27

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96913 · Hydr. pressbrake

          DARLEY - EHP-LS 320.32/27 - - 2011 -

          Technical details
          pressure 320 t︱chamfer lenght 3200 mm︱distance between columns 2740 mm︱stroke 400 mm︱Center of spindle to wall or column 420 mm︱dayligth 650 mm︱engine output 32,5 kW︱oil volume 350 l︱Control ︱total power requirement kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 4,75 x 2,80 x 3,60 m︱
          Only 5406.9 operating hours read • Delem DA-65W control • LazerSafe light barrier • Controlled axes: Y1, Y2, X, X1 (oblique), Z1, Z2 • 2 x support arms with parking position on the side • CNC controlled crowning • Hydraulic tool clamping at top + bottom • Extensive tool set, with very large dies for machines / steel construction
            pressure 320 t
            chamfer lenght 3200 mm
            distance between columns 2740 mm
            stroke 400 mm
            Center of spindle to wall or col. 420 mm
            dayligth 650 mm
            engine output 32,5 kW
            oil volume 350 l
            weight of the machine ca. 20 t
            dimensions of the machine ca. 4,75 x 2,80 x 3,60 m
            Description :
            Only 5406.9 operating hours read

            • Delem DA-65W control
            • LazerSafe light barrier
            • Controlled axes: Y1, Y2, X, X1 (oblique), Z1, Z2
            • 2 x support arms with parking position on the side
            • CNC controlled crowning
            • Hydraulic tool clamping at top + bottom
            • Extensive tool set, with very large dies for machines / steel construction


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake DARLEY EHP 50-20/15

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308216 · Hydr. pressbrake

          DARLEY - EHP 50-20/15 - - 1996 -

          Technical details
          pressure 50,0 t︱chamfer lenght 2050 mm︱distance between columns 1550 mm︱dayligth 320 mm︱stroke 120 mm︱ajustment speed 100 mm/sec︱working feed 10,0 mm/sec︱return speed 75,0 mm/sec︱column arm 250 mm︱work height max. 900 mm︱table width 100 mm︱connected load 7,2 kW︱oil volume 90 ltr.︱weight 2600 kg︱range L-W-H 2250 x 1100 x 2050 mm︱
          Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers * lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch
            pressure 50,0 t
            chamfer lenght 2050 mm
            distance between columns 1550 mm
            dayligth 320 mm
            stroke 120 mm
            ajustment speed 100 mm/sec
            working feed 10,0 mm/sec
            return speed 75,0 mm/sec
            column arm 250 mm
            work height max. 900 mm
            table width 100 mm
            connected load 7,2 kW
            oil volume 90 ltr.
            weight 2600 kg
            range L-W-H 2250 x 1100 x 2050 mm
            Description :
            Furnishing:
            - DELEM CNC control model DA 24e
            - swiveling control panel
            - electrical backgauge (X axis)
            - 2x manually adjustable stop fingers
            * lateral + vertical adjustment (R + Z axis)
            - 2x front support arms
            - SICK light barrier in front
            - 2 hand / foot switch


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake DARLEY EHP 50-20/15

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96714 · Hydr. pressbrake

          DARLEY - EHP 50-20/15 - - 1996 -

          Technical details
          pressure 050 t︱chamfer lenght 2050 mm︱distance between columns 1550 mm︱dayligth 320 mm︱stroke 120 mm︱ajustment speed 100 mm/sec︱working feed 10,0 mm/sec︱return speed 75,0 mm/sec︱column arm 250 mm︱work height max. 900 mm︱table width 100 mm︱connected load 7,2 kW︱oil volume 90 ltr.︱weight 2600 kg︱range L-W-H 2250 x 1100 x 2050 mm︱
          Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers * lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch
            pressure 050 t
            chamfer lenght 2050 mm
            distance between columns 1550 mm
            dayligth 320 mm
            stroke 120 mm
            ajustment speed 100 mm/sec
            working feed 10,0 mm/sec
            return speed 75,0 mm/sec
            column arm 250 mm
            work height max. 900 mm
            table width 100 mm
            connected load 7,2 kW
            oil volume 90 ltr.
            weight 2600 kg
            range L-W-H 2250 x 1100 x 2050 mm
            Description :
            Furnishing:
            - DELEM CNC control model DA 24e
            - swiveling control panel
            - electrical backgauge (X axis)
            - 2x manually adjustable stop fingers
            * lateral + vertical adjustment (R + Z axis)
            - 2x front support arms
            - SICK light barrier in front
            - 2 hand / foot switch


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake DARLEY EHP 110-31/25

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308384 · Hydr. pressbrake

          DARLEY - EHP 110-31/25 - - 1990 -

          Technical details
          pressure 110 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 250 mm︱dayligth 375 mm︱stroke 150 mm︱ajustment speed 100 mm/sec︱working feed 8.0 mm/sec︱return speed 65.0 mm/sec︱table width 160 mm︱work height max. 900 mm︱oil volume 130 ltr.︱total power requirement 7.5 kW︱weight of the machine ca. 8700 kg︱range L-W-H 3220 x 1290 x 2550 mm︱
          ** well maintained / good condition (!!) Furnishing: - electro-hydraulic CNC press brake - DELEM CNC control - model DA 58 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC axis adjustment Y1 - Y2 - X axis - CNC electro-motorized back gauge * incl. 2x manually adjustable stop fingers (R+Z axis) - manual table cambering, adjustment via hand crank * including analogue value display - 1x split pointed upper tool (manufacturer UKB) - 1x universal rotating Multi-V die block * incl. 2x chain for hanging in the upper beam - 2x front - adjustable support arms - 1x freely movable 2 hand/foot control - Operating instructions: machine + control (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308384
            pressure 110 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            column arm 250 mm
            dayligth 375 mm
            stroke 150 mm
            ajustment speed 100 mm/sec
            working feed 8.0 mm/sec
            return speed 65.0 mm/sec
            table width 160 mm
            work height max. 900 mm
            oil volume 130 ltr.
            total power requirement 7.5 kW
            weight of the machine ca. 8700 kg
            range L-W-H 3220 x 1290 x 2550 mm
            Description :
            ** well maintained / good condition (!!)

            Furnishing:
            - electro-hydraulic CNC press brake
            - DELEM CNC control - model DA 58
            * Swivel control panel, front left
            * 2D graphical programming & product display
            * Tool & program library
            - CNC axis adjustment Y1 - Y2 - X axis
            - CNC electro-motorized back gauge
            * incl. 2x manually adjustable stop fingers (R+Z axis)
            - manual table cambering, adjustment via hand crank
            * including analogue value display
            - 1x split pointed upper tool (manufacturer UKB)
            - 1x universal rotating Multi-V die block
            * incl. 2x chain for hanging in the upper beam
            - 2x front - adjustable support arms
            - 1x freely movable 2 hand/foot control
            - Operating instructions: machine + control (PDF)

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308384


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Hydr. pressbrake DARLEY EHP 150

          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland
          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-KAN213 · Hydr. pressbrake

          DARLEY - EHP 150 - - 1988 -

          Technical details
          Capacity 150 T︱Bend length 4.300 mm︱Control Delem - DA-65R ︱Dimensions (LxWxH) 4.600 x 1.700 x 2.900 mm︱
          Brand Darley Type EHP 150 CNC Brand Delem CNC Type DA-65R Year of make 1988 Capacity 150 T Bending length 4.300 mm Multi V + J-blade Electric back gauge Top drive Including bearings Including various tools Machine size 4.600 x 1.700 x 2.900 mm
            Capacity 150 T
            Bend length 4.300 mm
            Control Delem - DA-65R
            Dimensions (LxWxH) 4.600 x 1.700 x 2.900 mm
            Description :
            Brand Darley
            Type EHP 150
            CNC Brand Delem
            CNC Type DA-65R
            Year of make 1988
            Capacity 150 T
            Bending length 4.300 mm
            Multi V + J-blade
            Electric back gauge
            Top drive
            Including bearings
            Including various tools
            Machine size 4.600 x 1.700 x 2.900 mm


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

          • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Machines available immediately Plate Shear - Hydraulic DARLEY GS 4000 x 6

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-91535 · Plate Shear - Hydraulic

          DARLEY - GS 4000 x 6 - - 1989 - DARLEY

          Technical details
          sheet width 4100 mm︱plate thickness 6 mm︱distance between columns mm︱Control DARLEY ︱cutting angle 1°20' °︱quantity of oil 150 l︱total power requirement 18,5 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 4,6x2,3x2,0 m︱
          Cutting length adjustment, foot switch, 3 support arms (left with scale), motorized rear stop, finger guard, 21 hold-down devices, sheet metal slide, manual cutting gap adjustment, sheet metal holding device
            sheet width 4100 mm
            plate thickness 6 mm
            Control DARLEY
            cutting angle 1°20' °
            quantity of oil 150 l
            total power requirement 18,5 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 4,6x2,3x2,0 m
            Description :
            Cutting length adjustment,
            foot switch,
            3 support arms (left with scale),
            motorized rear stop,
            finger guard,
            21 hold-down devices,
            sheet metal slide,
            manual cutting gap adjustment,
            sheet metal holding device


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Plate Shear - Hydraulic DARLEY gs 3100/20

          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande
          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-2110009 · Plate Shear - Hydraulic

          DARLEY - gs 3100/20 - - 1987 -

          Technical details
          sheet width 3100 mm︱plate thickness 20 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 2110009 Type of machine Shear Make DARLEY Type GS 3100/20 Build in 1987 Type of control Incl. electric guide sheet widht 3100 mm Plate thickness 20 mm
            sheet width 3100 mm
            plate thickness 20 mm
            Description :
            Stocknumber 2110009
            Type of machine Shear
            Make DARLEY
            Type GS 3100/20
            Build in 1987
            Type of control Incl. electric guide
            sheet widht 3100 mm
            Plate thickness 20 mm



        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

          • Datasheet
          Request / Contact
          used Machines available immediately Plate Shear - Hydraulic DARLEY GS 3000 x 13

          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland
          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S371 · Plate Shear - Hydraulic

          DARLEY - GS 3000 x 13 - - 1981 -

          Technical details
          Knife length 3000 mm︱Plate thickness - mm︱Machine dimensions (lxwxh) 3.700 x 2.300 x 1.860 mm︱Machine weight 12300 kg︱capacity 13 mm︱
          Brand Darley Type GS 3000 x 13 Year of make 1981 Capacity 13 mm Blade length 3.000 mm With bearings Electric back gauge Hydraulic drive Machine size (lxwxh) 3.700 x 2.300 x 1.860 mm Machine weight 12.300 kg
            Knife length 3000 mm
            Plate thickness - mm
            Machine dimensions (lxwxh) 3.700 x 2.300 x 1.860 mm
            Machine weight 12300 kg
            capacity 13 mm
            Description :
            Brand Darley
            Type GS 3000 x 13
            Year of make 1981
            Capacity 13 mm
            Blade length 3.000 mm
            With bearings
            Electric back gauge
            Hydraulic drive
            Machine size (lxwxh) 3.700 x 2.300 x 1.860 mm
            Machine weight 12.300 kg




        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

          • Datasheet
          Request / Contact
          used Machines available immediately Plate Shear - Hydraulic DARLEY GS 3660 x 16

          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland
          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6432 · Plate Shear - Hydraulic

          DARLEY - GS 3660 x 16 - - 1975 -

          Technical details
          sheet width 3700 mm︱plate thickness 16 mm︱distance between columns 3860 mm︱cutting angle 2 °︱back stop - adjustable 1000 mm︱down holder 18 Stk.︱oil volume ca. 500 l︱total power requirement 22 kW︱weight of the machine ca. 10500 kg︱dimensions of the machine ca. 4500 x 2500 x 2500 mm︱
          Max. Sheet thickness stainless steel: 12mm Cut gap adjustment: 0-16 mm - Machine has a back gauge adjustable from the front. - cut line lighting
            sheet width 3700 mm
            plate thickness 16 mm
            distance between columns 3860 mm
            cutting angle 2 °
            back stop - adjustable 1000 mm
            down holder 18 Stk.
            oil volume ca. 500 l
            total power requirement 22 kW
            weight of the machine ca. 10500 kg
            dimensions of the machine ca. 4500 x 2500 x 2500 mm
            Description :
            Max. Sheet thickness stainless steel: 12mm
            Cut gap adjustment: 0-16 mm

            - Machine has a back gauge adjustable from the front.
            - cut line lighting


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately Plate Shear - Hydraulic DARLEY GS 3016

          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland
          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S335 · Plate Shear - Hydraulic

          DARLEY - GS 3016 - - -

          Technical details
          Knife length 3000 mm︱Plate thickness 16 mm︱Machine dimensions (lxwxh) 3.800 x 1.700 x 2.100 mm︱Machine weight 13.000 kg︱
          C Throat depth: 600 mm Slide through to cut longer plate Cutting gap adjustment 2021 new barriers in cutting cylinders Backstop electric
            Knife length 3000 mm
            Plate thickness 16 mm
            Machine dimensions (lxwxh) 3.800 x 1.700 x 2.100 mm
            Machine weight 13.000 kg
            Description :
            C Throat depth: 600 mm
            Slide through to cut longer plate
            Cutting gap adjustment
            2021 new barriers in cutting cylinders
            Backstop electric



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

          • Datasheet
          Request / Contact

          Punching Machine - hydraulic

          used Machines available immediately Punching Machine - hydraulic DARLEY GS 4100 x 6

          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland
          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-21462 · Punching Machine - hydraulic

          DARLEY - GS 4100 x 6 - - 1978 -

          Technical details
          sheet width mm︱plate length mm︱plate thickness mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 4100 mm
          metal sheet thickness: 6 mm
          throat: 100 mm
          H0y2tmo
          rear stop: 0 - 1000 mm
          power: 18,5 kW
          space needed: 4600 x 2200 x 1950 mm
          weight: 11000 kg
            Description :
            working width: 4100 mm

            metal sheet thickness: 6 mm

            throat: 100 mm

            H0y2tmo

            rear stop: 0 - 1000 mm

            power: 18,5 kW

            space needed: 4600 x 2200 x 1950 mm

            weight: 11000 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   
          TOP Manufacturer:

          компендіум
          Софтвер
          Вміст старих машин
          Конфіденційність
          Слідкуйте за нами!
          © 2000 - 2024, Logotech oHG · Програмне забезпечення та Інтернет-послуги - Всі права захищені