'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Lathes

          Machinelist: Lathes


          Bench Lathe

          used Lathes Bench Lathe HBM 250 x 550 Norton Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78003 · Bench Lathe

          HBM - 250 x 550 Norton Profi - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱
          Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 125 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 1,25 x 0,6 x 0,6 m
            Description :
            Speed in 6 levels 125 - 2000rpm.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm. (Independent)
            Fixed bezel.
            Revolving bezel.
            4-fold steel holder.
            chip tray.
            back panel.
            spindle protection.
            Hardened bed rails.
            Longitudinal feed with left / right switching.
            Set of change gears.
            Associated Tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Profi Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78002 · Bench Lathe

          HBM - 250 x 550 Profi Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱
          Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,3 x 0,6 x 0,65 m
            Description :
            Benchtop lathe with base cabinet
            3-axis LCD digital display system fully assembled.
            Longitudinal feed.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm.
            Clamping plate.
            4-way steel holder.
            Clock for thread cutting.
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Forage protection
            Set of wheels.
            Appropriate tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 290 x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78006 · Bench Lathe

          HBM - 290 x 750 - - -neu- -

          Technical details
          turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱
          2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.
            turning diameter over bed 290 mm
            turning diameter over slide rest 170 mm
            turning length 750 mm
            turning speeds 75 - 2000 U/min
            centre height 145 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            tailstock quill stroke 80 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,34 t
            dimensions of the machine ca. 1,3 x 0,75 x 0,7 m
            Description :
            2-axis LCD digital display system (now new).
            Longitudinal and transverse feed.
            3-jaw chuck 160 mm.
            4-jaw chuck 160 mm.
            faceplate
            4-way steel holder with 4 pcs tool holders
            2 pcs. bezels
            Machine light
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Feed protection
            Set of wheels.
            Machine tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact

          Center Lathe

          used Lathes Center Lathe HBM 330 x 600


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78063 · Center Lathe

          HBM - 330 x 600 - - -

          Technical details
          turning diameter over bed 320 mm︱turning diameter over slide rest 220 mm︱turning length 600 mm︱turning diameter in the gap 320 mm︱turning speeds 60 - 1650 U/min︱centre height 160 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱connected load frequency 400 V︱total power requirement 1,1 kW︱weight of the machine ca. 340 Kg︱dimensions of the machine ca. 1,4 x 0,75 x 0,7 m︱
          Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools
            turning diameter over bed 320 mm
            turning diameter over slide rest 220 mm
            turning length 600 mm
            turning diameter in the gap 320 mm
            turning speeds 60 - 1650 U/min
            centre height 160 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            connected load frequency 400 V
            total power requirement 1,1 kW
            weight of the machine ca. 340 Kg
            dimensions of the machine ca. 1,4 x 0,75 x 0,7 m
            Description :
            Center lathe with:
            3-jaw chuck 160 mm.
            4-jaw chuck 200 mm.
            Faceplate 200mm
            Fixed bezel
            Continuous bezel
            4-way steel holder.
            Halogen machine light
            Chip tray, chip protection wall
            Hardened and ground bed tracks
            Longitudinal and cross feed
            Complete coolant system
            Forage protection
            Set of change gears
            Machine tools


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HBM 400 x 1000 DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78066 · Center Lathe

          HBM - 400 x 1000 DRO - - -

          Technical details
          turning diameter over bed 400 mm︱turning diameter over slide rest 264 mm︱turning length 1000 mm︱turning diameter in the gap 550 mm︱turning speeds 44 - 2000 U/min︱centre height 200 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 MK︱connected load frequency 400 V︱total power requirement 1,5 / 2,4 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,56 m︱
          3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools
            turning diameter over bed 400 mm
            turning diameter over slide rest 264 mm
            turning length 1000 mm
            turning diameter in the gap 550 mm
            turning speeds 44 - 2000 U/min
            centre height 200 mm
            spindle bore 52 mm
            tailstock quill taper MT 4 MK
            connected load frequency 400 V
            total power requirement 1,5 / 2,4 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 1,9 x 0,8 x 1,56 m
            Description :
            3-axis digital display
            3-jaw chuck 200 mm.
            4-jaw chuck 200 mm.
            Faceplate 320mm
            bezel fixed
            running bezel
            4-fold steel holder.
            Halogen machine light
            machine light
            foot brake
            removable chip tray, chip protection wall
            Hardened and ground bed tracks
            Complete coolant system
            lining protection
            machine tools


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HBM 360 x 1000 DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78070 · Center Lathe

          HBM - 360 x 1000 DRO - - -

          Technical details
          turning diameter over bed 360 mm︱turning diameter over slide rest 220 mm︱turning length 1000 mm︱turning diameter in the gap 380 mm︱turning speeds 70 - 2000 U/min︱centre height 180 mm︱spindle bore 50 mm︱tailstock quill taper MT 3 MK︱connected load frequency 230 oder 400 V︱total power requirement 1,8 kW︱weight of the machine ca. 0.65 t︱dimensions of the machine ca. 2,0 x 0,8 x 1,56 m︱
          Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools
            turning diameter over bed 360 mm
            turning diameter over slide rest 220 mm
            turning length 1000 mm
            turning diameter in the gap 380 mm
            turning speeds 70 - 2000 U/min
            centre height 180 mm
            spindle bore 50 mm
            tailstock quill taper MT 3 MK
            connected load frequency 230 oder 400 V
            total power requirement 1,8 kW
            weight of the machine ca. 0.65 t
            dimensions of the machine ca. 2,0 x 0,8 x 1,56 m
            Description :
            Professional industrial machine
            3-axis digital display
            3-jaw chuck 180 mm.
            4-jaw chuck 200 mm.
            Faceplate 280mm
            Bezel fixed
            Bezel rotating
            4-fold steel holder.
            Halogen machine light
            Machine light
            Foot brake
            removable chip tray, chip protection wall
            Hardened and ground bed rails
            Complete coolant system
            Feed protection
            Machine tools


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HBM 320 x 900 Professional


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78071 · Center Lathe

          HBM - 320 x 900 Professional - - -

          Technical details
          turning diameter over bed 320 mm︱turning diameter over slide rest 200 mm︱turning length 900 mm︱turning diameter in the gap mm︱turning speeds 75 - 2000 U/min︱centre height 160 mm︱spindle bore 50 mm︱tailstock quill taper MT 3 MK︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,29 t︱dimensions of the machine ca. 2,0 x 0,8 x 1,56 m︱
          Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools
            turning diameter over bed 320 mm
            turning diameter over slide rest 200 mm
            turning length 900 mm
            turning speeds 75 - 2000 U/min
            centre height 160 mm
            spindle bore 50 mm
            tailstock quill taper MT 3 MK
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,29 t
            dimensions of the machine ca. 2,0 x 0,8 x 1,56 m
            Description :
            Professional lathe
            3-jaw chuck
            4-jaw chuck
            faceplate
            bezel fixed
            running bezel
            Quick-change steel holder with 4 cassettes
            Halogen machine light
            Chip tray, chip protection wall
            Hardened and ground bed tracks
            Complete coolant system
            feed protection
            machine tools


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HBM 320 x 900 DRO Professional


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78073 · Center Lathe

          HBM - 320 x 900 DRO Professional - - -

          Technical details
          turning diameter over bed 320 mm︱turning diameter over slide rest 200 mm︱turning length 900 mm︱turning diameter in the gap mm︱turning speeds 75 - 2000 U/min︱centre height 160 mm︱spindle bore 50 mm︱tailstock quill taper MT 3 MK︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,29 t︱dimensions of the machine ca. 2,0 x 0,8 x 1,56 m︱
          Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools
            turning diameter over bed 320 mm
            turning diameter over slide rest 200 mm
            turning length 900 mm
            turning speeds 75 - 2000 U/min
            centre height 160 mm
            spindle bore 50 mm
            tailstock quill taper MT 3 MK
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,29 t
            dimensions of the machine ca. 2,0 x 0,8 x 1,56 m
            Description :
            Professional lathe
            3-jaw chuck
            4-jaw chuck
            faceplate
            bezel fixed
            running bezel
            Quick-change steel holder with 4 cassettes
            Halogen machine light
            Chip tray, chip protection wall
            Hardened and ground bed tracks
            Complete coolant system
            feed protection
            machine tools


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact

          CNC Lathe - Inclined Bed Type

          used Lathes CNC Lathe - Inclined Bed Type Tongtai HS-22 mit Stangenlader 1200 (o


          • Kraft Werkzeugmaschinen GmbH
          • Wilhelmstraße 20
          • 64589 Stockstadt
          • Deutschland

          • +49 (0) 6158/9999975
          • nr@kraft-werkzeugmaschinen.de
            www.kraft-werkzeugmaschinen.de
          #4019-29999 · CNC Lathe - Inclined Bed Type

          Tongtai - HS-22 mit Stangenlader 1200 (o - - 2020 - Fanuc 0i-TF Manual Guide (Werk

          Technical details
          turning diameter 220 mm︱turning length 200 mm︱control Fanuc 0i-TF Manual Guide ︱bar material dia. 26 mm︱spindle speeds 6000 1/min.︱spindle drive 7,5/11 kW︱rapid speed 20 m/min︱travel -x axis 155 mm︱travel - z 200 mm︱CNC controller Fanuc 0i-TF Manual Guide ︱turret 12 (hydr.) fach︱heat exchanger for electr. cabinet ︱hydraulic unit mit Lufkühlung ︱hollow chuck hydraulisch, 150 mm︱transformator ︱coolant system ︱signal lamp ︱tool holder 4 Stück Innen (Ø32mm), 6 ︱CE-design ︱part catcher
          Contains: 1.Control system Fanuc 0i-TD (8.4"COLOR LCD) 2.Spindle motor 7.5/11KW Fanuc â8/8000i 3.Spindle speed 6.000 RPM (Bar capacity: Dia 26mm) 4.X/Z-Axis stroke 155/220 mm 5.X/Z Axis rapid traverse 20/20 m/min 6.Hyd.hollow chuck 6" x 3 jaws 7.Hydraulic turret system 12 stations 8.Hyd. Unit for chuck with air cooler 9.Without tailstock 10.Standard splash guard 11.Electrical cabinet with heat exchanger 12.Coolant unit 13.Transformer 14.Chip conveyor with trolley (chain type) 15.Machine color TongTai grey/blue 16.Fanuc warranty Standard accessories: 1.O.D. tool holder x 2 pcs 2.O.D. tool gasket x 6 pcs 3.I.D. tool holder x 4 pcs 4.ID tool holder dia 32mm x 4 pcs 5.Boring sleeve x 6 pcs (Dia 10,12,16,20,25,32) 6.Drilling sleeve x 3 pcs (MT#1,2,3) 7.Soft Jaws x 1 set Options: 1.CE Mark 2.Balance of spindle dia 85 mm with bar capacity die 44 mm Spindle speed 4800 RPM & Hyd. hollow chuck 8" x 3 jaws 3.Tool presetter (by manual) 4.Add soft jaws x 5 sets for 8"chuck 5.Hard jaws x 1 set (for 8"chuck use) 6. Dynamic graphic display function
            turning diameter 220 mm
            turning length 200 mm
            control Fanuc 0i-TF Manual Guide
            bar material dia. 26 mm
            spindle speeds 6000 1/min.
            spindle drive 7,5/11 kW
            rapid speed 20 m/min
            travel -x axis 155 mm
            travel - z 200 mm
            CNC controller Fanuc 0i-TF Manual Guide
            turret 12 (hydr.) fach
            hydraulic unit mit Lufkühlung
            hollow chuck hydraulisch, 150 mm
            tool holder 4 Stück Innen (Ø32mm), 6
            Description :
            Contains:

            1.Control system Fanuc 0i-TD (8.4"COLOR LCD)
            2.Spindle motor 7.5/11KW Fanuc â8/8000i
            3.Spindle speed 6.000 RPM (Bar capacity: Dia 26mm)
            4.X/Z-Axis stroke 155/220 mm
            5.X/Z Axis rapid traverse 20/20 m/min
            6.Hyd.hollow chuck 6" x 3 jaws
            7.Hydraulic turret system 12 stations
            8.Hyd. Unit for chuck with air cooler
            9.Without tailstock
            10.Standard splash guard
            11.Electrical cabinet with heat exchanger
            12.Coolant unit
            13.Transformer
            14.Chip conveyor with trolley (chain type)
            15.Machine color TongTai grey/blue
            16.Fanuc warranty

            Standard accessories:

            1.O.D. tool holder x 2 pcs
            2.O.D. tool gasket x 6 pcs
            3.I.D. tool holder x 4 pcs
            4.ID tool holder dia 32mm x 4 pcs
            5.Boring sleeve x 6 pcs (Dia 10,12,16,20,25,32)
            6.Drilling sleeve x 3 pcs (MT#1,2,3)
            7.Soft Jaws x 1 set

            Options:

            1.CE Mark
            2.Balance of spindle dia 85 mm with bar capacity die 44 mm Spindle speed 4800 RPM & Hyd. hollow chuck 8" x 3 jaws
            3.Tool presetter (by manual)
            4.Add soft jaws x 5 sets for 8"chuck
            5.Hard jaws x 1 set (for 8"chuck use)
            6. Dynamic graphic display function


        • Kraft Werkzeugmaschinen GmbH
        • Wilhelmstraße 20
        • 64589 Stockstadt
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.