'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Lathes

          Machinelist: Lathes


          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled SEIGER SLZ-1200x6000


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03296 · Lathe - cycle-controlled

          SEIGER - SLZ-1200x6000 - - 2009 - Heidenhain 620

          Technical details
          turning diameter ca. 850 mm︱turning length 6000 mm︱control Heidenhain 620 ︱centre distance 6000 mm︱swing diameter over bed slide 1250 mm︱swing diameter max. over cross slide 850 mm︱radial face slide adjustment 680 mm︱spindle bore 130 mm︱main drive AC: ︱spindle capacity 100% / 60% ED 37 / 52 kW︱max. torque ca. 9000 Nm︱turning speed range 5 - 710 U/min︱feed motor AC: ︱rapid traverse X-axis 6 m/min︱rapid travel Y-axis 3 m/min︱tailstock: ︱diameter of quill 160 mm︱quill stroke 315 mm︱quill holder (inner taper) MK 6 ︱steady, closed: passage 450 mm︱
          Equipment/accessories: - face plate diameter 1200 mm - various fixators - documentation
            turning diameter ca. 850 mm
            turning length 6000 mm
            control Heidenhain 620
            centre distance 6000 mm
            swing diameter over bed slide 1250 mm
            swing diameter max. over cross s. 850 mm
            radial face slide adjustment 680 mm
            spindle bore 130 mm
            spindle capacity 100% / 60% ED 37 / 52 kW
            max. torque ca. 9000 Nm
            turning speed range 5 - 710 U/min
            rapid traverse X-axis 6 m/min
            rapid travel Y-axis 3 m/min
            diameter of quill 160 mm
            quill stroke 315 mm
            quill holder (inner taper) MK 6
            steady, closed: passage 450 mm
            Description :
            Equipment/accessories:

            - face plate diameter 1200 mm
            - various fixators
            - documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used Lathes Vertical Turret Lathe - Double Column DÖRRIES SCHARMANN Contumat VC 5000/450 MC


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03227 · Vertical Turret Lathe - Double Column

          DÖRRIES SCHARMANN - Contumat VC 5000/450 MC - - 2009 - Siemens 840 D

          Technical details
          faceplate diameter 4500 mm︱swing diameter 5000 mm︱turning height 2645 mm︱control Siemens 840 D ︱cross rail adjustment - vertical 1500 mm︱max. ram stroke 2000 mm︱ram head dimension 300 x 300 mm︱faceplate turning speed range 0,4 - 95 U/min︱main drive 2 x 80 kW︱faceplate load max. 80.000 kg︱
          Equipment / Accessories: - C-axis driven tools HSK 100, 37 kW, 3000 rpm - hydrostatic guides of the linear axes - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement - tool and process monitoring ARTIS CTM system - workspace visualisation via video camera on the support - tool magazine (arranged on the floor) for turning and milling tools as well as storage for milling heads - work area protection completely closed with automatic covering of the chip chutes - coolant system with filter system, chip conveyor - various tool holders - documentation
            faceplate diameter 4500 mm
            swing diameter 5000 mm
            turning height 2645 mm
            control Siemens 840 D
            cross rail adjustment - vertical 1500 mm
            max. ram stroke 2000 mm
            ram head dimension 300 x 300 mm
            faceplate turning speed range 0,4 - 95 U/min
            main drive 2 x 80 kW
            faceplate load max. 80.000 kg
            Description :
            Equipment / Accessories:
            - C-axis driven tools HSK 100, 37 kW, 3000 rpm
            - hydrostatic guides of the linear axes
            - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement
            - tool and process monitoring ARTIS CTM system
            - workspace visualisation via video camera on the support
            - tool magazine (arranged on the floor) for turning and milling tools
            as well as storage for milling heads
            - work area protection completely closed with automatic covering of the
            chip chutes
            - coolant system with filter system, chip conveyor
            - various tool holders
            - documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 2800 / 250 SM F


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03271 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 2800 / 250 SM F - - 2008 - Siemens 840 D

          Technical details
          swing diameter 2800 mm︱turning height 1195 mm︱Control Siemens 840 D ︱turning speeds 224 U/min︱x-travel +-1600 mm︱z-travel 1100 mm︱machine table ︱diameter 2500 mm︱workpiece weight 25000 kg︱power capacity 80 kW︱Torque 35900 Nm︱total power requirement kW︱weight of the machine ca. 66,5 t︱dimensions of the machine ca. m︱faceplate diameter mm︱
          Dörries 6, Machine no. V-800293 - Fixed crossbeam, no tool drive Ram -Cross section of ram: 250 x 250 mm -Travel ram: 1100 mm Equipment/accessories: -Tool changer revolver 4-times in the ram -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 2800 mm
            turning height 1195 mm
            Control Siemens 840 D
            turning speeds 224 U/min
            x-travel +-1600 mm
            z-travel 1100 mm
            diameter 2500 mm
            workpiece weight 25000 kg
            power capacity 80 kW
            Torque 35900 Nm
            weight of the machine ca. 66,5 t
            Description :
            Dörries 6, Machine no. V-800293


            - Fixed crossbeam, no tool drive

            Ram
            -Cross section of ram: 250 x 250 mm
            -Travel ram: 1100 mm

            Equipment/accessories:
            -Tool changer revolver 4-times in the ram
            -Own filter system
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 1600/140 SM


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03270 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 1600/140 SM - - 2008 - Siemens 840 D

          Technical details
          swing diameter 1600 mm︱turning height 1285 mm︱Control Siemens 840 D ︱turning speeds 400 U/min︱x-travel +- 950 mm︱z-travel 1100 mm︱workpiece weight 9000 kg︱power capacity 80 kW︱Torque 19900 Nm︱table diameter 1400 mm︱weight of the machine ca. 42 t︱dimensions of the machine ca. 7600 x 5200 x 5400 mm︱
          Dörries 7, Machine number V-800294 Crossbeam: -Cross beam travel: 600 mm Ram: -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm) -Ram travel 1100 mm Equipment/accessories: -Tool magazine -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 1600 mm
            turning height 1285 mm
            Control Siemens 840 D
            turning speeds 400 U/min
            x-travel +- 950 mm
            z-travel 1100 mm
            workpiece weight 9000 kg
            power capacity 80 kW
            Torque 19900 Nm
            table diameter 1400 mm
            weight of the machine ca. 42 t
            dimensions of the machine ca. 7600 x 5200 x 5400 mm
            Description :
            Dörries 7, Machine number V-800294


            Crossbeam:
            -Cross beam travel: 600 mm

            Ram:
            -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm)
            -Ram travel 1100 mm

            Equipment/accessories:
            -Tool magazine
            -Own filter system
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 2400/200 SM


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03276 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 2400/200 SM - - 2008 - Siemens 840 D

          Technical details
          swing diameter 2400 mm︱turning height 2445 mm︱Control Siemens 840 D ︱feed range 0-18000 mm/min︱table diameter 2000 mm︱max. table load 17000 kg︱total power requirement 100 kW︱weight of the machine ca. 75 t︱dimensions of the machine ca. 10.000 x 5.500 x 7.100 mm︱
          Dörries 2, machine number V-800289 with hydraulical chuck, without milling function Crossbeam: -Travel crossbeam: 1000 mm (100 mm steps) -Crossbeam support travel: ± 1350 mm Ram : -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm) -Travel ram: 1500 mm Equipment/accessories: -No driven tools -Tool changer/head changer 72 times -Hydraulic chuck -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 2400 mm
            turning height 2445 mm
            Control Siemens 840 D
            feed range 0-18000 mm/min
            table diameter 2000 mm
            max. table load 17000 kg
            total power requirement 100 kW
            weight of the machine ca. 75 t
            dimensions of the machine ca. 10.000 x 5.500 x 7.100 mm
            Description :
            Dörries 2, machine number V-800289 with hydraulical chuck, without milling
            function


            Crossbeam:
            -Travel crossbeam: 1000 mm (100 mm steps)
            -Crossbeam support travel: ± 1350 mm

            Ram :
            -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm)
            -Travel ram: 1500 mm

            Equipment/accessories:
            -No driven tools
            -Tool changer/head changer 72 times
            -Hydraulic chuck
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation




        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column DÖRRIES VCE 2400 / 220 MC


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03272 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 2400 / 220 MC - - 2008 - Siemens 840 D

          Technical details
          swing diameter 2400 mm︱turning height 2145 mm︱Control Siemens 840 D ︱turning speeds 250 U/min︱Speed range - c-axis 0,0025 - 3,15 U/min︱Smallest input increment of the c-axis 1/1000 °︱speed steps of main gearbox 2 ︱x-travel +-1350 mm︱z-travel 1500 mm︱Positioning of the crossbar - grid spacing 100 mm︱ 400 mm/min︱power capacity 100 kW︱machine table ︱Torque 35700 Nm︱diameter 2200 mm︱workpiece weight 17000 kg︱Right crossbar support ︱bit feeder section 250 x 250 mm︱Immersion diameter 340 mm︱x-travel +/- 1350 mm︱
          Dörries 1, Machine no. V-800288 Crossbeam: -Travel crossbeam: 1000 mm (100 mm steps) -Cross beam support travel: ± 1350 mm Ram: -Cross section of ram: 250 x 250 mm (minimum immersion diameter: 380 mm) -Travel ram: 1500 mm Equipment/accessories: -Driven tools -Tool changer/head changer 72 - times -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation
            swing diameter 2400 mm
            turning height 2145 mm
            Control Siemens 840 D
            turning speeds 250 U/min
            Speed range - c-axis 0,0025 - 3,15 U/min
            Smallest input increment of the . 1/1000 °
            speed steps of main gearbox 2
            x-travel +-1350 mm
            z-travel 1500 mm
            Positioning of the crossbar - gr. 100 mm
            400 mm/min
            power capacity 100 kW
            Torque 35700 Nm
            diameter 2200 mm
            workpiece weight 17000 kg
            bit feeder section 250 x 250 mm
            Immersion diameter 340 mm
            x-travel +/- 1350 mm
            Description :
            Dörries 1, Machine no. V-800288


            Crossbeam:
            -Travel crossbeam: 1000 mm (100 mm steps)
            -Cross beam support travel: ± 1350 mm


            Ram:
            -Cross section of ram: 250 x 250 mm (minimum immersion diameter: 380 mm)
            -Travel ram: 1500 mm

            Equipment/accessories:
            -Driven tools
            -Tool changer/head changer 72 - times
            -BRANKAMP monitoring
            -REXROTH hydraulic unit
            -Chip conveyor
            -Documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.