'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Center Lathe

          Machinelist: Center Lathe


          Center Lathe

          used Lathes Center Lathe 5VDF BOEHRINGER unbekannt


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3522 · Center Lathe

          5VDF BOEHRINGER - unbekannt - - unbekannt -

          Technical details
          turning diameter over bed 500-600 mm︱turning diameter over slide rest / mm︱turning length 2800 mm︱bore diameter 130 mm︱total power requirement / kW︱weight of the machine ca. 5,25 t︱required space / m︱
            turning diameter over bed 500-600 mm
            turning diameter over slide rest / mm
            turning length 2800 mm
            bore diameter 130 mm
            total power requirement / kW
            weight of the machine ca. 5,25 t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe GEMA LZ 160


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06056 · Center Lathe

          GEMA - LZ 160 - - unbekannt -

          Technical details
          . ︱centre distance 1000 mm︱center height over bed 160 mm︱
            .
            centre distance 1000 mm
            center height over bed 160 mm


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe GURUTZPE Super AT 400


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S52001 · Center Lathe

          GURUTZPE - Super AT 400 - - unbekannt -

          Technical details
          turning length 2700 mm︱turning diameter 800 mm︱centre height 595 mm︱turning speeds 12 - 630 U/min︱weight 7600 kg︱faceplate 1190 mm︱required space 5,66 x 1,16 x 1,46 m︱
            turning length 2700 mm
            turning diameter 800 mm
            centre height 595 mm
            turning speeds 12 - 630 U/min
            weight 7600 kg
            faceplate 1190 mm
            required space 5,66 x 1,16 x 1,46 m
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe NARDINI MS 175E


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3717 · Center Lathe

          NARDINI - MS 175E - - unbekannt -

          Technical details
          greates pass round over bed 175 mm︱swing diameter over slide rest 350 mm︱centre distance 800 mm︱bed width 220 mm︱turning dia. over face-slide 200 mm︱chucking diameter 200 mm︱spindle bore 46 mm︱spindle head Gr. 5 ︱number of spindle speeds 18 ︱spindle turning speed range 25-2000 U/min︱face slide travel 195 mm︱upper slide 125 mm︱quill stroke 130 mm︱quill adjustment 10 mm︱tail stock MK 3 ︱power capacity 4,4 / 2,2 kW︱Dimensions (L/W/H) 1920 x 990 x 1360 mm︱weight of the machine ca. 900 kg︱
          inkl. new digital readout!
            greates pass round over bed 175 mm
            swing diameter over slide rest 350 mm
            centre distance 800 mm
            bed width 220 mm
            turning dia. over face-slide 200 mm
            chucking diameter 200 mm
            spindle bore 46 mm
            spindle head Gr. 5
            number of spindle speeds 18
            spindle turning speed range 25-2000 U/min
            face slide travel 195 mm
            upper slide 125 mm
            quill stroke 130 mm
            quill adjustment 10 mm
            tail stock MK 3
            power capacity 4,4 / 2,2 kW
            Dimensions (L/W/H) 1920 x 990 x 1360 mm
            weight of the machine ca. 900 kg
            Description :
            inkl. new digital readout!


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe VDF unbekannt


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3521 · Center Lathe

          VDF - unbekannt - - unbekannt -

          Technical details
          turning diameter over bed 300 mm︱turning diameter over slide rest / mm︱turning length 2600 mm︱bore diameter 60 mm︱total power requirement / kW︱weight of the machine ca. 2,55 t︱
            turning diameter over bed 300 mm
            turning diameter over slide rest / mm
            turning length 2600 mm
            bore diameter 60 mm
            total power requirement / kW
            weight of the machine ca. 2,55 t
            Description :



        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe VDF-BOEHRINGER 640 x 4000mm


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-AA1009 · Center Lathe

          VDF-BOEHRINGER - 640 x 4000mm - - unbekannt -

          Technical details
          turning diameter over bed 640 mm︱turning length ca. 4300 mm︱centre height 320 mm︱total power requirement 12 kW︱spindle passage 80 mm︱required space 6,5 x 1,55 x 1,5 m︱
            turning diameter over bed 640 mm
            turning length ca. 4300 mm
            centre height 320 mm
            total power requirement 12 kW
            spindle passage 80 mm
            required space 6,5 x 1,55 x 1,5 m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe VDF-HEIDENREICH & HARBECK V3


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3717 · Center Lathe

          VDF-HEIDENREICH & HARBECK - V3 - - unbekannt -

          Technical details
          Height of centres 255 mm︱turning diameter over bed 520 mm︱turning diameter over slide rest 300 mm︱turning length 1500 mm︱bed width 400 mm︱spindle bore 62 mm︱total power requirement 7,5 kW︱turning speeds 1400 U/min︱faceplate diameter 500 mm︱weight of the machine ca. ca. 2,85 t︱required space 3,8 x 1,4 m︱
            Height of centres 255 mm
            turning diameter over bed 520 mm
            turning diameter over slide rest 300 mm
            turning length 1500 mm
            bed width 400 mm
            spindle bore 62 mm
            total power requirement 7,5 kW
            turning speeds 1400 U/min
            faceplate diameter 500 mm
            weight of the machine ca. ca. 2,85 t
            required space 3,8 x 1,4 m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe CAZENEUVE HB 575


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S5266 · Center Lathe

          CAZENEUVE - HB 575 - - unbekannt -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 280 mm︱turning length 1000 mm︱centre height 250 mm︱turning speeds 2500 U/min︱total power requirement 9 kW︱weight of the machine ca. 1,9 t︱required space 2,5 x 1,25 x 1,6 m︱
            turning diameter over bed 500 mm
            turning diameter over slide rest 280 mm
            turning length 1000 mm
            centre height 250 mm
            turning speeds 2500 U/min
            total power requirement 9 kW
            weight of the machine ca. 1,9 t
            required space 2,5 x 1,25 x 1,6 m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe Mondiale Gallic 400


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3779 · Center Lathe

          Mondiale - Gallic 400 - - unbekannt -

          Technical details
          turning diameter over bed 400 mm︱turning diameter over slide rest 220 mm︱turning length 1000 mm︱centre height 200 mm︱bed width 340 mm︱spindle bore 68 mm︱tailstock taper MT 4 ︱diameter of quill 65 mm︱number of speeds 16 ︱spindle turning speed range 40-2000 U/min︱digital readout neu, 2-Achsen ︱3-jaw chuck Ø 250 mm︱weight of the machine ca. 1800 kg︱dimensions ca. 2500 x 1000 x 1500 mm︱
            turning diameter over bed 400 mm
            turning diameter over slide rest 220 mm
            turning length 1000 mm
            centre height 200 mm
            bed width 340 mm
            spindle bore 68 mm
            tailstock taper MT 4
            diameter of quill 65 mm
            number of speeds 16
            spindle turning speed range 40-2000 U/min
            digital readout neu, 2-Achsen
            3-jaw chuck Ø 250 mm
            weight of the machine ca. 1800 kg
            dimensions ca. 2500 x 1000 x 1500 mm


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HUVEMA CU 580M VAC x 1000


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010066 · Center Lathe

          HUVEMA - CU 580M VAC x 1000 - - 2022 -

          Technical details
          turning diameter over bed 580 mm︱turning diameter over slide rest 380 mm︱turning length 1000 mm︱turning dia. in gap 780 mm︱spindle bore 72 mm︱spindle taper Größe 8, DIN 55027 ︱spindle turning speed - stepless 20 -2000 U/min︱feeds - longitudinal 0,059 - 1,646 mm/U︱thread - mm pitch 0,2 - 14 mm︱thread - inch 2 - 112 Gang / inch.︱tailstock quill diameter 75 mm︱tailstock quill taper metric MK 5 ︱tailstock quill stroke 180 mm︱max. workpiece weight between centres 800 kg︱voltage 400 V / 50 Hz︱total power requirement 7,5 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 2,9 x 1,2 x 1,5 m︱
          • stepless adjustable turning speed via frequency converter, digital display, • coolant device • foot brake • halogen lamp
            turning diameter over bed 580 mm
            turning diameter over slide rest 380 mm
            turning length 1000 mm
            turning dia. in gap 780 mm
            spindle bore 72 mm
            spindle taper Größe 8, DIN 55027
            spindle turning speed - stepless 20 -2000 U/min
            feeds - longitudinal 0,059 - 1,646 mm/U
            thread - mm pitch 0,2 - 14 mm
            thread - inch 2 - 112 Gang / inch.
            tailstock quill diameter 75 mm
            tailstock quill taper metric MK 5
            tailstock quill stroke 180 mm
            max. workpiece weight between ce. 800 kg
            voltage 400 V / 50 Hz
            total power requirement 7,5 kW
            weight of the machine ca. 2,8 t
            dimensions of the machine ca. 2,9 x 1,2 x 1,5 m
            Description :
            • stepless adjustable turning speed via frequency converter, digital display,
            • coolant device
            • foot brake
            • halogen lamp



        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe BULMAK - ZMM SLIVEN CU 1250 x 4000 VAC


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-006123 · Center Lathe

          BULMAK - ZMM SLIVEN - CU 1250 x 4000 VAC - - 2022 -

          Technical details
          turning diameter over bed 1320 mm︱turning diameter over slide rest 940 mm︱turning length 4000 mm︱centre height 625 mm︱turning dia. in gap 1510 mm︱bed width 700 mm︱spindle bore 155 mm︱spindle taper: DIN 55027 Gr. 15 ︱spindle turning speed range 24 / 5 - 1000 rpm.︱spindle motor 30 kW︱weight of the machine ca. 8,55 t︱dimensions of the machine ca. 1,5 x 6,2 x 1,7 m︱Machinelight ︱Electric for three-phase 400 Volt ︱carriage-rapid traverse ︱digital readout in 3 axis ACU-RITE ︱4 station steel holder ︱Power traverse in the top carriage ︱Chip protect bonnet ︱Chip protection behind
          Machine is new, will be made according to order Delivery time: approx. 6 months, With large spindle bore 155 mm and self-travel in the top support. Basic machine is without chuck and steady rests, (Pictures show a used machine)
            turning diameter over bed 1320 mm
            turning diameter over slide rest 940 mm
            turning length 4000 mm
            centre height 625 mm
            turning dia. in gap 1510 mm
            bed width 700 mm
            spindle bore 155 mm
            spindle taper: DIN 55027 Gr. 15
            spindle turning speed range 24 / 5 - 1000 rpm.
            spindle motor 30 kW
            weight of the machine ca. 8,55 t
            dimensions of the machine ca. 1,5 x 6,2 x 1,7 m
            digital readout in 3 axis ACU-RITE
            Description :
            Machine is new, will be made according to order
            Delivery time: approx. 6 months,
            With large spindle bore 155 mm and self-travel in the top support.
            Basic machine is without chuck and steady rests,
            (Pictures show a used machine)


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HUVEMA HU 560  x 1500 NG


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-015127 · Center Lathe

          HUVEMA - HU 560 x 1500 NG - - 2022 -

          Technical details
          turning diameter over bed 560 mm︱turning diameter over slide rest 355 mm︱turning length 1500 mm︱spindle bore 80 mm︱spindle turning speed range 25 - 1600 U/min︱turning dia. in gap 785 mm︱metric threading 0,2 - 14 mm︱thread - inch 2 - 112 inch.︱thread - module 34 / 0,1 - 7 mm︱Whitworth-thread 60 / 2 - 112 TPI︱adjustment of the upper slide 140 mm︱dia. of quill 130 mm︱quill stroke 120 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2,8 x 1,20 x 1,5 m︱
          Lathe with precision ground and induction hardened bed. Very suitable for use in workshops and training centers. Standard accessories include a Newall digital display. The machine is built according to CE directives. The machine is also available 1 m and 2 m. Features: 3-jaw chuck 250 mm 4-jaw chuck 315 mm 2-axis Newall digital display European supported protective cover Fixed and travelling steady rest Halogen lighting Solid cast iron base frame Quadruple steel holder
            turning diameter over bed 560 mm
            turning diameter over slide rest 355 mm
            turning length 1500 mm
            spindle bore 80 mm
            spindle turning speed range 25 - 1600 U/min
            turning dia. in gap 785 mm
            metric threading 0,2 - 14 mm
            thread - inch 2 - 112 inch.
            thread - module 34 / 0,1 - 7 mm
            Whitworth-thread 60 / 2 - 112 TPI
            adjustment of the upper slide 140 mm
            dia. of quill 130 mm
            quill stroke 120 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2,8 x 1,20 x 1,5 m
            Description :
            Lathe with precision ground and induction hardened bed. Very suitable for use
            in workshops and training centers. Standard accessories include a Newall
            digital display. The machine is built according to CE directives. The machine
            is also available 1 m and 2 m.

            Features:
            3-jaw chuck 250 mm
            4-jaw chuck 315 mm
            2-axis Newall digital display
            European supported protective cover
            Fixed and travelling steady rest
            Halogen lighting
            Solid cast iron base frame
            Quadruple steel holder


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe JESSEY STUDTURN 1440 VS


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-1349_ST · Center Lathe

          JESSEY - STUDTURN 1440 VS - - 2022 -

          Technical details
          0360 mm︱ 215 mm︱ 1000 mm︱ 180 mm︱ 45 mm︱ 3,75 kW︱
            0360 mm
            215 mm
            1000 mm
            180 mm
            45 mm
            3,75 kW


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM C 400 TM


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-945 · Center Lathe

          ZMM - C 400 TM - - 2022 -

          Technical details
          neu20221672prompt, Zwischenverkauf vBulgarien33100 €︱ 671.93 €︱ 11400 mm︱ 1000 mm︱ 200 mm︱ 52 mm︱ 235 mm︱ 320 mm︱ 66 M︱ 1250-2.240 1/min︱ 80
          driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 750 mm € 32.490,- turning length 1.500 mm € 34.070,-
            neu
            2022
            1672
            prompt, Zwischenverkauf v
            Bulgarien
            33100 €
            671.93 €
            1
            1
            400 mm
            1000 mm
            200 mm
            52 mm
            235 mm
            320 mm
            6
            6 M
            12
            50-2.240 1/min
            80
            Description :
            driven by manual transmission
            3-axes digital readout Fagor 40i
            quick change toolpostMultisuissewith4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
            spindle noseNr. 6 DIN 55027
            four way rapid traverse device
            spindle dead center
            coolant equipment
            1 pce. flange plate for lathe chuckØ 200 mm
            1 adapter sleeve
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            FURTHER TURNING LENGTHS:

            turning length 750 mm
            € 32.490,-

            turning length 1.500 mm
            € 34.070,-


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Center Lathe JESSEY CHAMPION 1550


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-1530CHA · Center Lathe

          JESSEY - CHAMPION 1550 - - 2022 -

          Technical details
          0390 mm︱ 240 mm︱ 1250 mm︱ 190 mm︱ 57 mm︱ 5,5 kW︱
            0390 mm
            240 mm
            1250 mm
            190 mm
            57 mm
            5,5 kW


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe JESSEY STUDTURN 1440


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-1331_ST · Center Lathe

          JESSEY - STUDTURN 1440 - - 2022 -

          Technical details
          0360 mm︱ 215 mm︱ 1000 mm︱ 180 mm︱ 45 mm︱ 2,25/3,25 kW︱
            0360 mm
            215 mm
            1000 mm
            180 mm
            45 mm
            2,25/3,25 kW


        • Volz Werkzeugmaschinen
        • Friedrich-Ebert Straße 78-80
        • 58454 Witten-Annen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HUVEMA HU 460  x 1500 NG


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-015125 · Center Lathe

          HUVEMA - HU 460 x 1500 NG - - 2021 -

          Technical details
          turning diameter over bed 460 mm︱turning diameter over slide rest 274 mm︱turning length 1500 mm︱spindle bore 58 mm︱spindle turning speed range 25 - 2000 U/min︱turning dia. in gap 690 mm︱metric threading 41 / 0,1 - 14 mm︱thread - inch 60 / 2 - 112 inch.︱thread - module 34 / 0,1 - 7 mm︱Whitworth-thread 60 / 2 - 112 TPI︱adjustment of the upper slide 140 mm︱dia. of quill 60 mm︱quill stroke 120 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1,7 / 2,0 t︱dimensions of the machine ca. 2,2 x 1,0 x 1,3 m︱
          Lathe with precision ground and induction hardened bed. Very suitable for use in workshops and training centers. Standard accessories include a Newall digital display. The machine is built according to CE directives. The machine is also available 1 m and 2 m. Features: 3-jaw chuck 250 mm 4-jaw chuck 31 5mm 2-axis Newall digital display European supported protective cover Fixed and travelling steady rest Halogen lighting Solid cast iron base frame Quadruple steel holder
            turning diameter over bed 460 mm
            turning diameter over slide rest 274 mm
            turning length 1500 mm
            spindle bore 58 mm
            spindle turning speed range 25 - 2000 U/min
            turning dia. in gap 690 mm
            metric threading 41 / 0,1 - 14 mm
            thread - inch 60 / 2 - 112 inch.
            thread - module 34 / 0,1 - 7 mm
            Whitworth-thread 60 / 2 - 112 TPI
            adjustment of the upper slide 140 mm
            dia. of quill 60 mm
            quill stroke 120 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1,7 / 2,0 t
            dimensions of the machine ca. 2,2 x 1,0 x 1,3 m
            Description :
            Lathe with precision ground and induction hardened bed. Very suitable for use
            in workshops and training centers. Standard accessories include a Newall
            digital display. The machine is built according to CE directives. The machine
            is also available 1 m and 2 m.

            Features:
            3-jaw chuck 250 mm
            4-jaw chuck 31 5mm
            2-axis Newall digital display
            European supported protective cover
            Fixed and travelling steady rest
            Halogen lighting
            Solid cast iron base frame
            Quadruple steel holder


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HUVEMA HU 460  x 1000 NG


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-015124 · Center Lathe

          HUVEMA - HU 460 x 1000 NG - - 2021 -

          Technical details
          turning diameter over bed 460 mm︱turning diameter over slide rest 274 mm︱turning length 1000 mm︱spindle bore 58 mm︱spindle turning speed range 25 - 2000 U/min︱turning dia. in gap 690 mm︱metric threading 41 / 0,1 - 14 mm︱thread - inch 60 / 2 - 112 inch.︱thread - module 34 / 0,1 - 7 mm︱Whitworth-thread 60 / 2 - 112 TPI︱adjustment of the upper slide 140 mm︱dia. of quill 60 mm︱quill stroke 120 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1,7 / 2,0 t︱dimensions of the machine ca. 2,2 x 1,0 x 1,3 m︱
          Lathe with precision ground and induction hardened bed. Very suitable for use in workshops and training centers. Standard accessories include a Newall digital display. The machine is built according to CE directives. The machine is also available in 1.5 m and 2 m. Features: 3 jaw chuck 250 mm 4 jaw chuck 315 mm Newall digital readout European protective cover fixed and travelling steady halogen machine light solid cast iron base quadruple steel holder
            turning diameter over bed 460 mm
            turning diameter over slide rest 274 mm
            turning length 1000 mm
            spindle bore 58 mm
            spindle turning speed range 25 - 2000 U/min
            turning dia. in gap 690 mm
            metric threading 41 / 0,1 - 14 mm
            thread - inch 60 / 2 - 112 inch.
            thread - module 34 / 0,1 - 7 mm
            Whitworth-thread 60 / 2 - 112 TPI
            adjustment of the upper slide 140 mm
            dia. of quill 60 mm
            quill stroke 120 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1,7 / 2,0 t
            dimensions of the machine ca. 2,2 x 1,0 x 1,3 m
            Description :
            Lathe with precision ground and induction hardened bed. Very
            suitable for use in workshops and training centers. Standard accessories
            include a Newall digital display. The machine is built according to CE
            directives. The machine is also available in 1.5 m and 2 m.

            Features:
            3 jaw chuck 250 mm
            4 jaw chuck 315 mm
            Newall digital readout
            European protective cover
            fixed and travelling steady
            halogen machine light
            solid cast iron base
            quadruple steel holder


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HUVEMA HU 460  x 2000 NG


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-015126 · Center Lathe

          HUVEMA - HU 460 x 2000 NG - - 2021 -

          Technical details
          turning diameter over bed 460 mm︱turning diameter over slide rest 274 mm︱turning length 2000 mm︱spindle bore 58 mm︱spindle turning speed range 25 - 2000 U/min︱turning dia. in gap 690 mm︱metric threading 41 / 0,1 - 14 mm︱thread - inch 60 / 2 - 112 inch.︱thread - module 34 / 0,1 - 7 mm︱Whitworth-thread 60 / 2 - 112 TPI︱adjustment of the upper slide 140 mm︱dia. of quill 60 mm︱quill stroke 120 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1,7 / 2,0 t︱dimensions of the machine ca. 2,2 x 1,0 x 1,3 m︱
          A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chuck 4 jaw chuck Newall digital readout European protective cover fixed and travelling steady halogen machine light solid cast iron base
            turning diameter over bed 460 mm
            turning diameter over slide rest 274 mm
            turning length 2000 mm
            spindle bore 58 mm
            spindle turning speed range 25 - 2000 U/min
            turning dia. in gap 690 mm
            metric threading 41 / 0,1 - 14 mm
            thread - inch 60 / 2 - 112 inch.
            thread - module 34 / 0,1 - 7 mm
            Whitworth-thread 60 / 2 - 112 TPI
            adjustment of the upper slide 140 mm
            dia. of quill 60 mm
            quill stroke 120 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1,7 / 2,0 t
            dimensions of the machine ca. 2,2 x 1,0 x 1,3 m
            Description :
            A comprehensive range of quality centre lathes characterised by wide
            versatility,high accuracy and extremely rigid construction. The machines are well equipped
            with a multi-fix quick change tool post and 2-axis Newall digital readout fitted
            as standard and a variable speed option is available. Huvema lathes fully
            conform to CE regulations. Also available in: 1,5m


            3 jaw chuck
            4 jaw chuck
            Newall digital readout
            European protective cover
            fixed and travelling steady
            halogen machine light
            solid cast iron base



        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe BULMAK - ZMM SLIVEN CU 1250 x 1500 VAC


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-006124 · Center Lathe

          BULMAK - ZMM SLIVEN - CU 1250 x 1500 VAC - - 2021 -

          Technical details
          turning diameter over bed 1320 mm︱turning diameter over slide rest 940 mm︱turning length 1500 mm︱centre height 625 mm︱turning dia. in gap 1510 mm︱bed width 700 mm︱spindle bore 155 mm︱spindle taper: DIN 55027 Gr. 15 ︱spindle turning speed range 24 / 5 - 1000 rpm.︱spindle motor 30 kW︱weight of the machine ca. 8,55 t︱dimensions of the machine ca. 1,5 x 6,2 x 1,7 m︱Machinelight ︱Electric for three-phase 400 Volt ︱carriage-rapid traverse ︱digital readout in 3 axis ACU-RITE ︱4 station steel holder ︱Power traverse in the top carriage ︱Chip protect bonnet ︱Chip protection behind
          New Machine, will be manufactured after ordering delivery time: approx. 3 months with big spindle bore 155 mm and automatic feed in the top support the base machine is without chuck and steady rests pictures show a used machine
            turning diameter over bed 1320 mm
            turning diameter over slide rest 940 mm
            turning length 1500 mm
            centre height 625 mm
            turning dia. in gap 1510 mm
            bed width 700 mm
            spindle bore 155 mm
            spindle taper: DIN 55027 Gr. 15
            spindle turning speed range 24 / 5 - 1000 rpm.
            spindle motor 30 kW
            weight of the machine ca. 8,55 t
            dimensions of the machine ca. 1,5 x 6,2 x 1,7 m
            digital readout in 3 axis ACU-RITE
            Description :
            New Machine, will be manufactured after ordering
            delivery time: approx. 3 months
            with big spindle bore 155 mm and automatic feed in the top support
            the base machine is without chuck and steady rests
            pictures show a used machine


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HUVEMA CU 580M VAC


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010053 · Center Lathe

          HUVEMA - CU 580M VAC - - 2020 -

          Technical details
          turning diameter over bed 580 mm︱turning diameter over slide rest 380 mm︱turning length 2000 mm︱turning dia. in gap 780 mm︱spindle bore 72 mm︱spindle taper Größe 8, DIN 55027 ︱spindle turning speed - stepless 25-200 / 200-1600 U/min︱feeds - longitudinal 0,059 - 1,646 mm/U︱thread - mm pitch 0,2 - 14 mm︱thread - inch 2 - 112 Gang / inch.︱tailstock quill diameter 75 mm︱tailstock quill taper metric MK 5 ︱tailstock quill stroke 180 mm︱max. workpiece weight between centres 800 kg︱voltage 400 V / 50 Hz︱total power requirement 7,5 kW︱weight of the machine ca. 3,1 t︱dimensions of the machine ca. 2,9 x 1,2 x 1,5 m︱
          • stepless adjustable turning speed via frequency converter, digital display, • 2-axis digital display, • coolant, foot brake, halogen lamp, • 3- jaw chuck, Ø 300 mm, 4- jaw chuck, • fixed and live steady, • quick changing tool holder with 3 boxes
            turning diameter over bed 580 mm
            turning diameter over slide rest 380 mm
            turning length 2000 mm
            turning dia. in gap 780 mm
            spindle bore 72 mm
            spindle taper Größe 8, DIN 55027
            spindle turning speed - stepless 25-200 / 200-1600 U/min
            feeds - longitudinal 0,059 - 1,646 mm/U
            thread - mm pitch 0,2 - 14 mm
            thread - inch 2 - 112 Gang / inch.
            tailstock quill diameter 75 mm
            tailstock quill taper metric MK 5
            tailstock quill stroke 180 mm
            max. workpiece weight between ce. 800 kg
            voltage 400 V / 50 Hz
            total power requirement 7,5 kW
            weight of the machine ca. 3,1 t
            dimensions of the machine ca. 2,9 x 1,2 x 1,5 m
            Description :
            • stepless adjustable turning speed via frequency converter, digital display,
            • 2-axis digital display,
            • coolant, foot brake, halogen lamp,
            • 3- jaw chuck, Ø 300 mm, 4- jaw chuck,
            • fixed and live steady,
            • quick changing tool holder with 3 boxes


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HUVEMA HU 460 x 1000 VAC NG


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010121 · Center Lathe

          HUVEMA - HU 460 x 1000 VAC NG - - 2020 -

          Technical details
          turning diameter over bed 460 mm︱turning diameter over slide rest 274 mm︱turning length 1000 mm︱spindle bore 58 mm︱turning dia. in gap 690 mm︱spindle taper Größe 6, DIN 55029 ︱spindle turning speed - stepless 30 - 2000 U/min︱feeds - longitudinal 0,031 - 1,7 mm/U︱thread - mm pitch 0,1 - 14 mm︱thread - inch 2 - 112 Gang / inch.︱tailstock quill diameter 60 mm︱tailstock quill taper metric MT 4 ︱tailstock quill stroke 120 mm︱max. workpiece weight between centres 500 kg︱voltage 400 V / 50 Hz︱spindle motor 5,5 kW︱total power requirement 6 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 2,9 x 1,2 x 1,5 m︱
          Infinitely variable speed control via frequency converter, indication on display, coolant system, foot brake, halogen lamp, NEWALL - 2-axis digital display, fixed and travelling steady rest, additional price for quick change tool holder with 4 cassettes - € 1250,-.
            turning diameter over bed 460 mm
            turning diameter over slide rest 274 mm
            turning length 1000 mm
            spindle bore 58 mm
            turning dia. in gap 690 mm
            spindle taper Größe 6, DIN 55029
            spindle turning speed - stepless 30 - 2000 U/min
            feeds - longitudinal 0,031 - 1,7 mm/U
            thread - mm pitch 0,1 - 14 mm
            thread - inch 2 - 112 Gang / inch.
            tailstock quill diameter 60 mm
            tailstock quill taper metric MT 4
            tailstock quill stroke 120 mm
            max. workpiece weight between ce. 500 kg
            voltage 400 V / 50 Hz
            spindle motor 5,5 kW
            total power requirement 6 kW
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 2,9 x 1,2 x 1,5 m
            Description :
            Infinitely variable speed control via frequency converter, indication on
            display,
            coolant system,
            foot brake,
            halogen lamp,
            NEWALL - 2-axis digital display,
            fixed and travelling steady rest,
            additional price for quick change tool holder with 4 cassettes - € 1250,-.


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe ZMM C 400 TM


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2028 · Center Lathe

          ZMM - C 400 TM - - 2020 -

          Technical details
          gebraucht20201658prompt, Zwischenverkauf vBulgarien26500 €︱ 1400 mm︱ 1000 mm︱ 200 mm︱ 52 mm︱ 235 mm︱ 320 mm︱ 66 M︱ 1250-2.240 1/min︱ 800.015 - 0.6 mm/U︱ 0.0075 - 0.3 mm/U︱
          driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE"
            gebraucht
            2020
            1658
            prompt, Zwischenverkauf v
            Bulgarien
            26500 €
            1
            400 mm
            1000 mm
            200 mm
            52 mm
            235 mm
            320 mm
            6
            6 M
            12
            50-2.240 1/min
            80
            0.015 - 0.6 mm/U
            0.0075 - 0.3 mm/U
            Description :
            driven by manual transmission
            3-axes digital readout Fagor 40i
            quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
            spindle noseNr. 6 DIN 55027
            four way rapid traverse device
            spindle dead center
            coolant equipment
            1 pce. flange plate for lathe chuckØ 200 mm
            1 adapter sleeve
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Center Lathe HUVEMA C 400 x 1000 TS VAC


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010129 · Center Lathe

          HUVEMA - C 400 x 1000 TS VAC - - 2019 -

          Technical details
          turning diameter over bed 400 mm︱turning diameter over slide rest 235 mm︱turning length 1000 mm︱turning dia. in gap 560 mm︱spindle bore 52 mm︱spindle taper Größe 6, DIN 55029 ︱spindle turning speed - stepless 18 - 2120 U/min︱feeds - longitudinal 0,015 - 0,6 mm/U︱face feeds 0,0075 - 0,3 ︱thread - mm pitch 0.25 - 7,5 mm︱thread - inch 4 - 120 Gang / inch.︱tailstock quill diameter 50 mm︱tailstock quill taper metric MT 4 ︱tailstock quill stroke 120 mm︱max. workpiece weight between centres 500 kg︱voltage 400 V / 50 Hz︱spindle motor 5,5 kW︱total power requirement 7,5 kW︱weight of the machine ca. 1,85 t︱dimensions of the machine ca. 2,9 x 1,2 x 1,5 m︱
          Infinitely variable speed control via frequency converter, indication on display, coolant system, foot brake, halogen lamp, additional price for NEWALL - 2-axis digital display = € 2.100,- additional price for quick change tool holder = € 1.260,-.
            turning diameter over bed 400 mm
            turning diameter over slide rest 235 mm
            turning length 1000 mm
            turning dia. in gap 560 mm
            spindle bore 52 mm
            spindle taper Größe 6, DIN 55029
            spindle turning speed - stepless 18 - 2120 U/min
            feeds - longitudinal 0,015 - 0,6 mm/U
            face feeds 0,0075 - 0,3
            thread - mm pitch 0.25 - 7,5 mm
            thread - inch 4 - 120 Gang / inch.
            tailstock quill diameter 50 mm
            tailstock quill taper metric MT 4
            tailstock quill stroke 120 mm
            max. workpiece weight between ce. 500 kg
            voltage 400 V / 50 Hz
            spindle motor 5,5 kW
            total power requirement 7,5 kW
            weight of the machine ca. 1,85 t
            dimensions of the machine ca. 2,9 x 1,2 x 1,5 m
            Description :
            Infinitely variable speed control via frequency converter, indication on
            display,
            coolant system,
            foot brake,
            halogen lamp,
            additional price for NEWALL - 2-axis digital display = € 2.100,-
            additional price for quick change tool holder = € 1.260,-.


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •