'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Lathe - cycle-controlled

          Machinelist: Lathe - cycle-controlled


          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled PINACHO Smart turn 8 225


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03977 · Lathe - cycle-controlled

          PINACHO - Smart turn 8 225 - - 2013 - FAGOR TC 8055

          Technical details
          turning diameter 450 mm︱turning length 1500 mm︱control FAGOR TC 8055︱total power requirement 15 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2.29X1 X 1.2 m︱
          TEACH IN CNC LATHE Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate machine up to 450 mm in swing over bed, 1500 mm in distance between centers and 65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL. The available power up to 15 kW in addition to the high rotary speed and low vibrations provided by the servomotor and headstock design make the ST-225 an authentic leader in its category.
            turning diameter 450 mm
            turning length 1500 mm
            control FAGOR TC 8055
            total power requirement 15 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2.29X1 X 1.2 m
            Description :
            TEACH IN CNC LATHE
            Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate
            machine up to 450 mm in swing over bed, 1500 mm in distance between centers and
            65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL.
            The available power up to 15 kW in addition to the high rotary speed and low
            vibrations provided by the servomotor and headstock design make the ST-225 an
            authentic leader in its category.
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled VDF BOEHRINGER DUS 630 TI


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03777 · Lathe - cycle-controlled

          VDF BOEHRINGER - DUS 630 TI - - 2007 - HEINDENHAIN MANUEL PLUS 411

          Technical details
          swing diameter max. 640 mm︱turning length max. 3.000 mm︱control HEINDENHAIN MANUEL PLUS 411︱swing diameter over face slide 435 mm︱radial face slide travel 345 mm︱centre height 280 mm︱bed width 360 mm︱Main spindle: ︱turning speed range - main spindle 3 - 2.500 min/-1︱power capacity - main spindel 19 / 15 kW︱max. Torque 2500 Nm︱transmission ratio 2 ︱spindle nose DIN 55027 / 8 ︱spindle bearing diameter 100 mm︱max. bar capacity 95 mm︱usable bar diameter 80 mm︱chucking diameter 415 mm︱turret: ︱number of toolpositions PARRAT 4 FACH pos.4︱tool taper DIN 69880 / 32 X 25
          Lathe - cycle controled VDF BOEHRINGER - DUS 630 TI X 3000 YEAR 2007 CNC HEIDENHAIN MANUEL PLUS 411
            swing diameter max. 640 mm
            turning length max. 3.000 mm
            control HEINDENHAIN MANUEL PLUS 411
            swing diameter over face slide 435 mm
            radial face slide travel 345 mm
            centre height 280 mm
            bed width 360 mm
            turning speed range - main spind. 3 - 2.500 min/-1
            power capacity - main spindel 19 / 15 kW
            max. Torque 2500 Nm
            transmission ratio 2
            spindle nose DIN 55027 / 8
            spindle bearing diameter 100 mm
            max. bar capacity 95 mm
            usable bar diameter 80 mm
            chucking diameter 415 mm
            number of toolpositions PARRAT 4 FACH pos.4
            tool taper DIN 69880 / 32 X 25
            Description :
            Lathe - cycle controled
            VDF BOEHRINGER - DUS 630 TI X 3000 YEAR 2007
            CNC HEIDENHAIN MANUEL PLUS 411
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SOMAB OPTIMAB 450


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03940 · Lathe - cycle-controlled

          SOMAB - OPTIMAB 450 - - 2005 - SOMAB PL + S NUM 1060

          Technical details
          turning diameter 400 mm︱turning length 1100 mm︱control SOMAB PL + S NUM 1060︱turning dia. over face-slide 350 mm︱turning diameter over cross slideways 320 mm︱main drive motor 12 kW︱spindle turning speed range 4500 U/min︱spindle passage 73 mm︱chucking diameter 250 mm︱taper in tailstock MT 4 ︱total power requirement 23 kW︱weight of the machine ca. 5 t︱
          Machine in inclined bed execution with NUM-SOMAB PL+S3 cycle control with 12 POSTES TURRET
            turning diameter 400 mm
            turning length 1100 mm
            control SOMAB PL + S NUM 1060
            turning dia. over face-slide 350 mm
            turning diameter over cross slid. 320 mm
            main drive motor 12 kW
            spindle turning speed range 4500 U/min
            spindle passage 73 mm
            chucking diameter 250 mm
            taper in tailstock MT 4
            total power requirement 23 kW
            weight of the machine ca. 5 t
            Description :
            Machine in inclined bed execution
            with NUM-SOMAB PL+S3 cycle control
            with 12 POSTES TURRET
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled FAT TUR 560


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03911 · Lathe - cycle-controlled

          FAT - TUR 560 - - 2000 - Siemens 810D

          Technical details
          turning diameter 560 mm︱turning length 1000 mm︱center height over bed 560 mm︱swing diameter over face slide 300 mm︱spindle bore 105 mm︱spindle speeds: 2 Stufen 2 - 2500 U/min︱tool taper REVOLVER VDI 40 ︱control Siemens 810D ︱total power requirement 18,5 kW︱weight of the machine ca. 4 t︱
          Equipment: swarf protector automatic cooling device RS 232 interface 3-jaw chuck diameter 315mm automatic lubrication system art-Documentation TURRET 8 POSITION VDI 40
            turning diameter 560 mm
            turning length 1000 mm
            center height over bed 560 mm
            swing diameter over face slide 300 mm
            spindle bore 105 mm
            spindle speeds: 2 Stufen 2 - 2500 U/min
            tool taper REVOLVER VDI 40
            control Siemens 810D
            total power requirement 18,5 kW
            weight of the machine ca. 4 t
            Description :
            Equipment:
            swarf protector
            automatic cooling device
            RS 232 interface
            3-jaw chuck diameter 315mm
            automatic lubrication system
            art-Documentation
            TURRET 8 POSITION VDI 40
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CAZENEUVE OPTICA 360


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03634 · Lathe - cycle-controlled

          CAZENEUVE - OPTICA 360 - - 2000 - CNC NUM NUM

          Technical details
          turning diameter 380 mm︱turning length 750 mm︱control CNC NUM NUM︱turning dia. over face-slide 200 mm︱turning diameter over cross slideways 280 mm︱main drive motor 11 kW︱spindle turning speed range 2 - 3000 U/min︱spindle passage 54 mm︱chucking diameter 160 mm︱taper in tailstock MT 4 ︱total power requirement 14 kW︱weight of the machine ca. 2 t︱
          NICE MACHINE WITH SIEMENS PANEL FOR CYCLES TURNING
            turning diameter 380 mm
            turning length 750 mm
            control CNC NUM NUM
            turning dia. over face-slide 200 mm
            turning diameter over cross slid. 280 mm
            main drive motor 11 kW
            spindle turning speed range 2 - 3000 U/min
            spindle passage 54 mm
            chucking diameter 160 mm
            taper in tailstock MT 4
            total power requirement 14 kW
            weight of the machine ca. 2 t
            Description :
            NICE MACHINE WITH SIEMENS PANEL FOR CYCLES TURNING
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled VOJUS Turntec 63


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02244 · Lathe - cycle-controlled

          VOJUS - Turntec 63 - - 1999 - SIEMENS 840 D

          Technical details
          turning diameter 630 mm︱turning length 3000 mm︱control SIEMENS 840 D ︱spindle bore 110 mm︱spindle turning speed - stepless 2500 U/min︱rapid travel - longitudinal/face 10/5 m/min︱range L-W-H 3000 x 1800 x 1790 mm︱turning diameter over slide rest 420 mm︱total power requirement 26 kW︱weight of the machine ca. 4,5 t︱
          * CNC-control HEIDENHAIN TURN PLUS * tool holder VDI 40 8 POSITION TURRET * 1 steadies * cooling
            turning diameter 630 mm
            turning length 3000 mm
            control SIEMENS 840 D
            spindle bore 110 mm
            spindle turning speed - stepless 2500 U/min
            rapid travel - longitudinal/face 10/5 m/min
            range L-W-H 3000 x 1800 x 1790 mm
            turning diameter over slide rest 420 mm
            total power requirement 26 kW
            weight of the machine ca. 4,5 t
            Description :
            * CNC-control HEIDENHAIN TURN PLUS
            * tool holder VDI 40 8 POSITION TURRET
            * 1 steadies

            * cooling
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CAZENEUVE MAXICA HC 725


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03863 · Lathe - cycle-controlled

          CAZENEUVE - MAXICA HC 725 - - 1998 - SOMAB PL + S5 + -SOMAB

          Technical details
          turning diameter 725 mm︱turning length 4000 mm︱control SOMAB PL + S5 + -SOMAB︱turning dia. over face-slide 670 mm︱turning diameter over cross slideways 390 mm︱main drive motor 16 kW︱spindle turning speed range 2500 U/min︱spindle passage 82 mm︱chucking diameter 315 mm︱taper in tailstock MT 5 ︱total power requirement 30 kW︱weight of the machine ca. 5 t︱
          Machine in WORKING CONDITION with NUM-SOMAB PL+S cycle control with MULTIFIX rapif tool holder size WITH SREADY
            turning diameter 725 mm
            turning length 4000 mm
            control SOMAB PL + S5 + -SOMAB
            turning dia. over face-slide 670 mm
            turning diameter over cross slid. 390 mm
            main drive motor 16 kW
            spindle turning speed range 2500 U/min
            spindle passage 82 mm
            chucking diameter 315 mm
            taper in tailstock MT 5
            total power requirement 30 kW
            weight of the machine ca. 5 t
            Description :
            Machine in WORKING CONDITION
            with NUM-SOMAB PL+S cycle control
            with MULTIFIX rapif tool holder size
            WITH SREADY
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled GILDEMEISTER NEF PLUS 500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02788 · Lathe - cycle-controlled

          GILDEMEISTER - NEF PLUS 500 - - 1997 - MANUAL PLUS

          Technical details
          control MANUAL PLUS ︱turning diameter 500 mm︱turning diameter over slide 290 mm︱turning length 1500 mm︱cross movement 250 mm︱chucking diameter max. 260 mm︱spindle turning speed - gearbox stage 1 80 - 250 1/min.︱spindle turning speed - gearbox stage 2 20 - 710 1/min.︱spindle turning speed - gearbox stage 3 80 - 2800 1/min.︱spindle motor 11 kW︱ max. 1050 Nm︱spindle head DIN 55027 - Size 8 ︱spindle bore 70 mm︱ Metrisch 80 ︱spindle diameter in front bearing 100 mm︱feeding force longitudinal / facing 10 / 5 Kn︱feed 5 m/min︱rapid travel - longitudinal/face 8 / 6 m/min︱tool holder Multifix C ︱tailstock quill diameter 80 mm︱
          Grundig Manual Plus control
            control MANUAL PLUS
            turning diameter 500 mm
            turning diameter over slide 290 mm
            turning length 1500 mm
            cross movement 250 mm
            chucking diameter max. 260 mm
            spindle turning speed - gearbox . 80 - 250 1/min.
            spindle turning speed - gearbox . 20 - 710 1/min.
            spindle turning speed - gearbox . 80 - 2800 1/min.
            spindle motor 11 kW
            max. 1050 Nm
            spindle head DIN 55027 - Size 8
            spindle bore 70 mm
            Metrisch 80
            spindle diameter in front bearin. 100 mm
            feeding force longitudinal / fac. 10 / 5 Kn
            feed 5 m/min
            rapid travel - longitudinal/face 8 / 6 m/min
            tool holder Multifix C
            tailstock quill diameter 80 mm
            Description :
            Grundig Manual Plus control
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SOMAB TRANSMAB 300


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00209 · Lathe - cycle-controlled

          SOMAB - TRANSMAB 300 - - 1991 - NUM 720 NUM 720

          Technical details
          turning diameter 300 mm︱turning length 500 mm︱control NUM 720 NUM 720︱turning dia. over face-slide 240 mm︱turning diameter over cross slideways 160 mm︱main drive motor 12 kW︱spindle turning speed range 5000 U/min︱spindle passage 52 mm︱chucking diameter 200 mm︱taper in tailstock MT 3 ︱total power requirement 15 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,3 x 1,9 x 1,8 m︱coolant YES
          Machine in inclined bed execution TURRET REVOLVER 8 POSITIONS VDI 20 CNC CONTROL NUM 720 T LOT OFF ACCESSOIRIS
            turning diameter 300 mm
            turning length 500 mm
            control NUM 720 NUM 720
            turning dia. over face-slide 240 mm
            turning diameter over cross slid. 160 mm
            main drive motor 12 kW
            spindle turning speed range 5000 U/min
            spindle passage 52 mm
            chucking diameter 200 mm
            taper in tailstock MT 3
            total power requirement 15 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,3 x 1,9 x 1,8 m
            coolant YES
            Description :
            Machine in inclined bed execution
            TURRET REVOLVER 8 POSITIONS VDI 20
            CNC CONTROL NUM 720 T
            LOT OFF ACCESSOIRIS
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SOMAB UNIMAB 400


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-00208 · Lathe - cycle-controlled

          SOMAB - UNIMAB 400 - - 1990 - SOMAB PL + S NUM-SOMAB

          Technical details
          turning diameter 400 mm︱turning length 1000 mm︱control SOMAB PL + S NUM-SOMAB︱turning dia. over face-slide 235 mm︱turning diameter over cross slideways 220 mm︱main drive motor 12 kW︱spindle turning speed range 2 - 3000 U/min︱spindle passage 52 mm︱chucking diameter 210 mm︱taper in tailstock MT 4 ︱total power requirement 15 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 3,3 x 1,9 x 1,8 m︱coolant JA
          Machine in inclined bed execution with NUM-SOMAB PL+S cycle control with MULTIFIX rapif tool holder size B
            turning diameter 400 mm
            turning length 1000 mm
            control SOMAB PL + S NUM-SOMAB
            turning dia. over face-slide 235 mm
            turning diameter over cross slid. 220 mm
            main drive motor 12 kW
            spindle turning speed range 2 - 3000 U/min
            spindle passage 52 mm
            chucking diameter 210 mm
            taper in tailstock MT 4
            total power requirement 15 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 3,3 x 1,9 x 1,8 m
            coolant JA
            Description :
            Machine in inclined bed execution
            with NUM-SOMAB PL+S cycle control
            with MULTIFIX rapif tool holder size B
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Профіль торговця: Fimotec

          Зв'язатися з трейдером



            Fimotec
           20 RUE AMPERE
            67500 - ГАГЕНАУ
            Франція
            +33 (0)388720247">+33 (0)388720247
            +33 (0)388936066
            FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR

          Профіль Трейдера

          Завдяки нашим світовим контактам з обробною промисловістю ми швидко знаходимо потрібні машини, навіть цілі лінії виробництва. На нашому складі завжди є великий вибір cnc-машин від великих виробників. Просто зателефонуйте нам і відвідайте наш виставковий зал, де всі зроблені нижче знімки зроблені.

          Будь ласка, дзвоніть з Вашим конкретним запитом, ми можемо запропонувати машини всіх значних європейських і японських виробників.

          Ми пропонуємо високоякісні машини, задокументовані за допомогою вимірювальних та точних карт тестів. Технічна допомога, а також курси програмування є частиною нашого післяпродажного обслуговування. Ми є проміжними для фінансування та лізингу між клієнтом і налагодженими банками

          • АНАЯК
          • БЕРТІЄЗ
          • БОЙХІНГЕР
          • БРАТ
          • ХІРОН
          • CINCINNAT
          • CME
          • CMZ
          • КОРРЕЯ
          • DAEWOO
          • LID
          • Mg
          • ДЖОРІ
          • ELB
          • ERNAULT
          • FANUC
          • ГІЛДЕМЕЙСТЕР
          • ХЕЛЛЕР
          • ГЕРМЕЛЬ
          • HITACHI
          • HURCO
          • ХУРОН
          • ІНДЕКС
          • JUNG
          • КІТАМУРА
          • MAHO
          • МАЗАК
          • МІКРОН
          • МІЦУІ СЕЙКІ
          • МОНФОРТИ
          • MORI-SEIKI
          • MTE
          • MURATEC
          • НАКАМУРА
          • OKK
          • ОКУМА
          • ШАРМАНН
          • SEIKI
          • ШВ
          • СТАМА
          • STUDER
          • TAKISAWA
          • КАШЕЛЬ
          • TOSHIBA
          • TRAUB
          • СОЮЗ
          • ЗАЙЕР

          Верстати FIMOTEC
          20, rue Ампер
          67500 Haguenau Франція,
          Текст: + 33 (0) 3 88 72 02 47
          Факс: + 33 (0) 3 88 72 02 94
          Адреса електронної пошти: fimotec@wanadoo.fr





          Cycle controlled Lathe from LagerMaschinen
          Cycle controlled Lathe from LagerMaschinen

          In the world of business and production management the cycle controlled lathe draws from several other instruments. Lathes are used in modern and classical carpentry as well as modern electrical and metal pipe work. As with any machine it's important to seek advice from top consultants when purchasing such an item. LagerMaschinen's wide selection of the the cycle controlled lathe will certainly make your choices easier. Please visit the website today to get started on LagerMaschinen.

          LagerMaschinen provides everything you need.

          LagerMaschinen's wide array of services offers its clients many opportunities. For instance you can have your new-but-used used machine correctly installed and connected - both electrically and within the entire computer network - so you can get back to production and production management. With a cycle controlled lathe from LagerMaschinen you'll also have free access to senders and machine experts and be able to ask advice as well as ensure the quality of your machine. LagerMaschinen's wide network in the machining industry means you'll be able to find the exact machine you need around the corner or at least know when you can 'give it a spin'. The cycle controlled lathe from LagerMaschinen - log on today.

          A used machine gets you where you want to be.

          The cycle controlled lathe from LagerMaschinen will certainly increase your bottom line - whether working in the plastics industry or in metalworks a cycle controlled lathe from LagerMaschinen can raise revenue annually and within the short term. Take advantage of LagerMaschinen's various add-ons such as customized delivery and installation. LagerMaschinen.de's cycle controlled lathe - start looking today.

          Fimotec   67500 - HAGUENAU 20 RUE AMPERE Frankreich
          Fimotec

          20 RUE AMPERE



          Contact Trader


            Fimotec
           20 RUE AMPERE
            67500 - HAGUENAU
            Frankreich
            +33 (0)388720247
            +33 (0)388936066
            FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
            Contact person:

           




          Machine category


          Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Fräsmaschine - Horizontal · Fräsmaschine - Universal · Kaltkreissäge · Konsolfräsmaschine - universal · Lehrenbohrwerk - Vertikal · Leit- und Zugspindeldrehmaschine · Radialbohrmaschine · Rundschleifmaschine - Universal · Stangenlader · Säulenbohrmaschine · Tieflochbohrmaschine · Tischbohrmaschine · Vertikal - Bandsäge · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal ·