'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Boring mills - Machining Centers - Drilling machines

          Machinelist: Boring mills / Machining Centers / Drilling machines


          Bench Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine MAXION ECOMAX 14


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76110 · Bench Drilling Machine

          MAXION - ECOMAX 14 - - neu -

          Technical details
          bore capacity in steel (diameter) 14 /15 mm︱throat 180 mm︱bore stroke 70 mm︱turning speeds 420 - 2100 U/min︱ 250 x 220 mm︱distance drilling head - clamping area max. 380 mm︱total power requirement 0,5/1,0 / 400 kW / Volt︱column diameter 65 mm︱tool taper MK 2 ︱weight of the machine ca. 0,08 t︱dimensions 0,4 x 0,5 x 0,9 m︱
          Table Drilling Machine with: variable feed Tapping function. depth display Coolant system Belt-drive spindle protection machine light
            bore capacity in steel (diameter. 14 /15 mm
            throat 180 mm
            bore stroke 70 mm
            turning speeds 420 - 2100 U/min
            250 x 220 mm
            distance drilling head - clampin. max. 380 mm
            total power requirement 0,5/1,0 / 400 kW / Volt
            column diameter 65 mm
            tool taper MK 2
            weight of the machine ca. 0,08 t
            dimensions 0,4 x 0,5 x 0,9 m
            Description :
            Table Drilling Machine with:
            variable feed
            Tapping function.
            depth display
            Coolant system
            Belt-drive
            spindle protection
            machine light


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine MAXION UNIMAX 1 Frequenz


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76111 · Bench Drilling Machine

          MAXION - UNIMAX 1 Frequenz - - neu -

          Technical details
          bore capacity in steel (diameter) 15 / 18 mm︱throat 180 mm︱bore stroke 80 mm︱turning speeds 200 - 4000 U/min︱ 250 x 220 mm︱distance drilling head - clamping area max. 380 mm︱total power requirement 1,1 / 400 kW / Volt︱column diameter 65 mm︱tool taper MK 2 ︱weight of the machine ca. 0,08 t︱dimensions 0,4 x 0,5 x 0,9 m︱
          Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection
            bore capacity in steel (diameter. 15 / 18 mm
            throat 180 mm
            bore stroke 80 mm
            turning speeds 200 - 4000 U/min
            250 x 220 mm
            distance drilling head - clampin. max. 380 mm
            total power requirement 1,1 / 400 kW / Volt
            column diameter 65 mm
            tool taper MK 2
            weight of the machine ca. 0,08 t
            dimensions 0,4 x 0,5 x 0,9 m
            Description :
            Precise table drill:
            - high accuracy and quality
            - Drill table adjustable via rack and swiveling around the column
            - Full engine protection
            - Star grip
            - 230 volt mains connection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine CORMAK WS 32 B


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76141 · Bench Drilling Machine

          CORMAK - WS 32 B - - neu -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 265 mm︱bore stroke 160 mm︱turning speeds 280 - 1975 U/min︱ 390 x 400 mm︱distance drilling head - clamping area 745 mm︱total power requirement 1,1 / 400 kW / Volt︱weight of the machine ca. 0,230 t︱dimensions 0,9 x 0,5 x 1,4 m︱
          Table Drilling Machine with: variable feed Tapping function. depth display Belt-drive spindle protection machine light
            bore capacity in steel (diameter. 32 mm
            throat 265 mm
            bore stroke 160 mm
            turning speeds 280 - 1975 U/min
            390 x 400 mm
            distance drilling head - clampin. 745 mm
            total power requirement 1,1 / 400 kW / Volt
            weight of the machine ca. 0,230 t
            dimensions 0,9 x 0,5 x 1,4 m
            Description :
            Table Drilling Machine with:
            variable feed
            Tapping function.
            depth display
            Belt-drive
            spindle protection
            machine light


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine MAXION UNIMAX 1 TAP


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76112 · Bench Drilling Machine

          MAXION - UNIMAX 1 TAP - - neu -

          Technical details
          bore capacity in steel (diameter) 15 / 18 mm︱throat 180 mm︱bore stroke 80 mm︱turning speeds 200 - 4000 U/min︱ 250 x 220 mm︱distance drilling head - clamping area max. 380 mm︱total power requirement 1,1 / 400 kW / Volt︱column diameter 65 mm︱tool taper MK 2 ︱weight of the machine ca. 0,08 t︱dimensions 0,4 x 0,5 x 0,9 m︱
          precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection
            bore capacity in steel (diameter. 15 / 18 mm
            throat 180 mm
            bore stroke 80 mm
            turning speeds 200 - 4000 U/min
            250 x 220 mm
            distance drilling head - clampin. max. 380 mm
            total power requirement 1,1 / 400 kW / Volt
            column diameter 65 mm
            tool taper MK 2
            weight of the machine ca. 0,08 t
            dimensions 0,4 x 0,5 x 0,9 m
            Description :
            precise bench drill:
            - Large speed range
            - Programmable thread cutting
            - high accuracy and quality
            - Drill table adjustable via rack and swiveling around the column
            - Full engine protection
            - Star grip
            - 230 volt mains connection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine WMT WMT 20


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76143 · Bench Drilling Machine

          WMT - WMT 20 - - neu -

          Technical details
          bore capacity in steel (diameter) 20 mm︱throat 180 mm︱bore stroke 82 mm︱turning speeds 220 - 2840 U/min︱ 290 x 290 mm︱total power requirement 0,55/0,75 kW / Volt︱weight of the machine ca. 54 Kg︱dimensions 820 x 500 x 290 mm︱
          CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop.
            bore capacity in steel (diameter. 20 mm
            throat 180 mm
            bore stroke 82 mm
            turning speeds 220 - 2840 U/min
            290 x 290 mm
            total power requirement 0,55/0,75 kW / Volt
            weight of the machine ca. 54 Kg
            dimensions 820 x 500 x 290 mm
            Description :
            CE-tested spindle hood.
            Keyless chuck (1 to 16 mm)
            Tilting work table.
            Depth stop.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine ELMAG KBM 16 T Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76144 · Bench Drilling Machine

          ELMAG - KBM 16 T Vario - - neu -

          Technical details
          bore capacity in steel (diameter) 16 mm︱throat 150 mm︱bore stroke 90 mm︱turning speeds 340 - 2200 U/min︱ 243 x 243 mm︱total power requirement 0,5 kW / Volt︱weight of the machine ca. 42 Kg︱dimensions 400 x 450 x 900 mm︱
          Table drill - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop - tool set - documentation
            bore capacity in steel (diameter. 16 mm
            throat 150 mm
            bore stroke 90 mm
            turning speeds 340 - 2200 U/min
            243 x 243 mm
            total power requirement 0,5 kW / Volt
            weight of the machine ca. 42 Kg
            dimensions 400 x 450 x 900 mm
            Description :
            Table drill
            - Digital speed display
            - Spindle protection
            - vice
            - drill replacement
            - Quick span feed (1 to 16 mm)
            - Tilt and rotating rider work table.
            - deep stop
            - tool set
            - documentation


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine KAMI BKM 5025


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76130 · Bench Drilling Machine

          KAMI - BKM 5025 - - neu -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 240 mm︱bore stroke 110 mm︱turning speeds 125 - 2850 U/min︱ 310 x 320 mm︱distance drilling head - clamping area max. 650 mm︱total power requirement 0,75 / 400 kW / Volt︱weight of the machine ca. 0,175 t︱dimensions 0,95x0,8x1,75 inkl. Tisch m︱
            bore capacity in steel (diameter. 25 mm
            throat 240 mm
            bore stroke 110 mm
            turning speeds 125 - 2850 U/min
            310 x 320 mm
            distance drilling head - clampin. max. 650 mm
            total power requirement 0,75 / 400 kW / Volt
            weight of the machine ca. 0,175 t
            dimensions 0,95x0,8x1,75 inkl. Tisch m
            Description :



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine WEBO Gradua 23


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23531 · Bench Drilling Machine

          WEBO - Gradua 23 - - neu -

          Technical details
          bore capacity in steel (diameter) 23 mm︱throat 310 mm︱bore stroke 150 mm︱turning speeds 90 - 2000 U/min︱ 420 x 360 mm︱total power requirement kW / Volt︱weight of the machine ca. 650 Kg︱dimensions 1,2 x 0,8 x 2,4 mm︱
          Bench drill - Left/right rotation - Advance - Base frame
            bore capacity in steel (diameter. 23 mm
            throat 310 mm
            bore stroke 150 mm
            turning speeds 90 - 2000 U/min
            420 x 360 mm
            weight of the machine ca. 650 Kg
            dimensions 1,2 x 0,8 x 2,4 mm
            Description :
            Bench drill
            - Left/right rotation
            - Advance
            - Base frame


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine UWM UWM 20


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76150 · Bench Drilling Machine

          UWM - UWM 20 - - -

          Technical details
          bore capacity in steel (diameter) 20 mm︱throat 195 mm︱bore stroke 80 mm︱boring spindle MK 2 ︱table surface area 320 x 300 mm︱total power requirement 0,75 kW︱weight of the machine ca. 0,072 t︱dimensions of the machine ca. 0,7 x 0,4 x 1,1 m︱
            bore capacity in steel (diameter. 20 mm
            throat 195 mm
            bore stroke 80 mm
            boring spindle MK 2
            table surface area 320 x 300 mm
            total power requirement 0,75 kW
            weight of the machine ca. 0,072 t
            dimensions of the machine ca. 0,7 x 0,4 x 1,1 m


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Bench Drilling Machine LUNAN Trapano 1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23536 · Bench Drilling Machine

          LUNAN - Trapano 1 - - -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 260 mm︱bore stroke 110 mm︱turning speeds 50 - 3000 U/min︱ 500 x 420 mm︱total power requirement 1,1 kW / Volt︱tool taper Mk4 ︱weight of the machine ca. 400 Kg︱dimensions 0,8 x 0,6 x 1,4 mm︱
          Bench drill, unused - automatic feed - Thread cutting device - Left/right rotation - Coolant system - Tool case
            bore capacity in steel (diameter. 40 mm
            throat 260 mm
            bore stroke 110 mm
            turning speeds 50 - 3000 U/min
            500 x 420 mm
            total power requirement 1,1 kW / Volt
            tool taper Mk4
            weight of the machine ca. 400 Kg
            dimensions 0,8 x 0,6 x 1,4 mm
            Description :
            Bench drill, unused
            - automatic feed
            - Thread cutting device
            - Left/right rotation
            - Coolant system
            - Tool case


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact

          Drilling and Milling M/C

          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HUVEMA HU.25 VHG


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-23534 · Drilling and Milling M/C

          HUVEMA - HU.25 VHG - - 2006 -

          Technical details
          bore capacity in steel (diameter) 25 mm︱bore stroke 150 mm︱spindle taper ISO 40115 - 1750 mm︱ mm︱ 600 mm︱ 350 mm︱ 350 mm︱table surface area 800 x 240 mm︱max. distance between table and spindle-nose mm︱connected load frequency 400 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 1,6 x 1,4 x 2,1 m︱
          Equipment: - Digital display - Horizontal spindle - Quill with hand feed - motor feed for X - Left/right running - Emergency stop switch - Drill head swiveling - Spindle protection - Machine light
            bore capacity in steel (diameter. 25 mm
            bore stroke 150 mm
            spindle taper ISO 40
            115 - 1750 mm
            600 mm
            350 mm
            350 mm
            table surface area 800 x 240 mm
            connected load frequency 400 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 1,6 x 1,4 x 2,1 m
            Description :
            Equipment:
            - Digital display
            - Horizontal spindle
            - Quill with hand feed
            - motor feed for X
            - Left/right running
            - Emergency stop switch
            - Drill head swiveling
            - Spindle protection
            - Machine light


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 25


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76016 · Drilling and Milling M/C

          HBM - BF 25 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 170 mm︱bore stroke 50 mm︱ 16 mm︱spindle taper MK 2 ︱spindle turning speed range 50 - 3000 U/min︱ 280 mm︱ 155 mm︱table surface area 500 x 180 mm︱connected load frequency 230 V︱max. distance between table and spindle-nose max. 320 mm︱total power requirement 0,8 kW︱weight of the machine ca. 150 Kg︱dimensions of the machine ca. 670 x 550 x 910 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!
            bore capacity in steel (diameter. 25 mm
            throat 170 mm
            bore stroke 50 mm
            16 mm
            spindle taper MK 2
            spindle turning speed range 50 - 3000 U/min
            280 mm
            155 mm
            table surface area 500 x 180 mm
            connected load frequency 230 V
            max. distance between table and . max. 320 mm
            total power requirement 0,8 kW
            weight of the machine ca. 150 Kg
            dimensions of the machine ca. 670 x 550 x 910 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content
            but without digital display !!


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM 40 H/V


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76022 · Drilling and Milling M/C

          HBM - 40 H/V - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 275 mm︱bore stroke 120 mm︱spindle taper MK 4 ︱turning speed range 75 - 3200 U/min︱ 190 mm︱ 490 mm︱table surface area 730 x 210 mm︱connected load frequency 400 V︱boring feeds: 0,1 - 0,18 - 0,26 mm/U︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 0,8 x 0,75 x 1,85 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 275 mm
            bore stroke 120 mm
            spindle taper MK 4
            turning speed range 75 - 3200 U/min
            190 mm
            490 mm
            table surface area 730 x 210 mm
            connected load frequency 400 V
            boring feeds: 0,1 - 0,18 - 0,26 mm/U
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 0,8 x 0,75 x 1,85 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM 40 H


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76020 · Drilling and Milling M/C

          HBM - 40 H - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 275 mm︱bore stroke 120 mm︱spindle taper MK 4 ︱turning speed range 75 - 3200 U/min︱ 190 mm︱ 490 mm︱table surface area 700 x 210 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 0,8 x 0,75 x 1,85 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 275 mm
            bore stroke 120 mm
            spindle taper MK 4
            turning speed range 75 - 3200 U/min
            190 mm
            490 mm
            table surface area 700 x 210 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 0,8 x 0,75 x 1,85 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C KAMI FKM 350-1 PD / SK40


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76005 · Drilling and Milling M/C

          KAMI - FKM 350-1 PD / SK40 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 130 mm︱spindle taper SK 40 ︱spindle turning speed range 75 - 3200 U/min︱ 500 mm︱ 230 mm︱table surface area 720 x 210 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 1,1 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 1,1 x 0,9 x 1,2 m︱
          domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 130 mm
            spindle taper SK 40
            spindle turning speed range 75 - 3200 U/min
            500 mm
            230 mm
            table surface area 720 x 210 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 1,1 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 1,1 x 0,9 x 1,2 m
            Description :
            domestic equipments
            • Digital display
            • Digital depth gauge for quill
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM TYP 16


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76011 · Drilling and Milling M/C

          HBM - TYP 16 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 16 mm︱throat 180 mm︱bore stroke 85 mm︱spindle taper MK 2 ︱spindle diameter 47 mm︱spindle turning speed range 320 - 3300 U/min︱ 230 mm︱ 100 mm︱table surface area 420 x 155 mm︱connected load frequency 230 V︱ 900 x 600 x 300 cm︱total power requirement 0,75 kW︱weight of the machine ca. 8o Kg︱dimensions 0,7 x 0,7 x 0,8 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 16 mm
            throat 180 mm
            bore stroke 85 mm
            spindle taper MK 2
            spindle diameter 47 mm
            spindle turning speed range 320 - 3300 U/min
            230 mm
            100 mm
            table surface area 420 x 155 mm
            connected load frequency 230 V
            900 x 600 x 300 cm
            total power requirement 0,75 kW
            weight of the machine ca. 8o Kg
            dimensions 0,7 x 0,7 x 0,8 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 45 Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76001 · Drilling and Milling M/C

          HBM - BF 45 Profi - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 45 mm︱throat 230 mm︱bore stroke 125 mm︱spindle taper ISO 30 ︱spindle turning speed range 75 - 1600 U/min︱max. milling cutter diameter 80 mm︱ 560 mm︱ 230 mm︱table surface area 800 x 240 mm︱max. distance between table and spindle-nose 460 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 320 Kg︱dimensions of the machine ca. 1,0 x 0,8 x 1,45 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 45 mm
            throat 230 mm
            bore stroke 125 mm
            spindle taper ISO 30
            spindle turning speed range 75 - 1600 U/min
            max. milling cutter diameter 80 mm
            560 mm
            230 mm
            table surface area 800 x 240 mm
            max. distance between table and . 460 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 320 Kg
            dimensions of the machine ca. 1,0 x 0,8 x 1,45 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C KAMI BKM 4040


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76021 · Drilling and Milling M/C

          KAMI - BKM 4040 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 115 mm︱spindle taper SK 40 ︱spindle turning speed range 70 - 3200 U/min︱ 350 mm︱ 130 mm︱table surface area 590 x 190 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱feed 0,1 - 0,18 - 0,26 mm/U︱total power requirement 1,1 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 0,7 x 0,95 x 1,75 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 115 mm
            spindle taper SK 40
            spindle turning speed range 70 - 3200 U/min
            350 mm
            130 mm
            table surface area 590 x 190 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            feed 0,1 - 0,18 - 0,26 mm/U
            total power requirement 1,1 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 0,7 x 0,95 x 1,75 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C KAMI FKM 349 V


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76008 · Drilling and Milling M/C

          KAMI - FKM 349 V - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 185 mm︱bore stroke 50 mm︱spindle taper MK 3 ︱spindle turning speed range 50 - 2500 U/min︱ 178 mm︱ 480 mm︱table surface area 700 x 180 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 160 t︱dimensions of the machine ca. 0,75 x 0,8 x 0,9 m︱
          domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 25 mm
            throat 185 mm
            bore stroke 50 mm
            spindle taper MK 3
            spindle turning speed range 50 - 2500 U/min
            178 mm
            480 mm
            table surface area 700 x 180 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 160 t
            dimensions of the machine ca. 0,75 x 0,8 x 0,9 m
            Description :
            domestic equipments
            • Digital depth gauge
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C KAMI FKM 650A


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76002 · Drilling and Milling M/C

          KAMI - FKM 650A - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 360 mm︱bore stroke 150 mm︱spindle turning speed range 120 - 3000 U/min︱spindle taper SK 40650 mm︱ 320 mm︱vertical adjustment 500 mm︱table surface area 1000 x 300 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,85 t︱dimensions of the machine ca. 1,25 x 1.5 x 2,3 m︱
          New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system
            bore capacity in steel (diameter. 50 mm
            throat 360 mm
            bore stroke 150 mm
            spindle turning speed range 120 - 3000 U/min
            spindle taper SK 40
            650 mm
            320 mm
            vertical adjustment 500 mm
            table surface area 1000 x 300 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,85 t
            dimensions of the machine ca. 1,25 x 1.5 x 2,3 m
            Description :
            New Model Industrial Drilling and Milling Machine with Manual Transmission and
            High Speed Range. The prism guide in the Z-axis ensures a high degree of
            precision even in the most difficult milling jobs.

            Domestic equipments:
            • automatic feed in X-axis
            • 3-axis digital display
            • motorized Z-axis
            • Feed in quill
            • Left-right-run high
            • tapping attachment
            • Gear head swiveling
            • Coolant system


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 30 DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76014 · Drilling and Milling M/C

          HBM - BF 30 DRO - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 198 mm︱bore stroke 75 mm︱ 16 mm︱spindle taper MK3 ︱spindle turning speed range 95 - 2840 U/min︱ 320 mm︱ 190 mm︱table surface area 700 x 190 mm︱connected load frequency 400 V︱max. distance between table and spindle-nose 55 - 405 mm︱total power requirement 1,1 kW︱weight of the machine ca. 180 Kg︱dimensions of the machine ca. 0,75 x 1,05 x 1,3 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!
            bore capacity in steel (diameter. 30 mm
            throat 198 mm
            bore stroke 75 mm
            16 mm
            spindle taper MK3
            spindle turning speed range 95 - 2840 U/min
            320 mm
            190 mm
            table surface area 700 x 190 mm
            connected load frequency 400 V
            max. distance between table and . 55 - 405 mm
            total power requirement 1,1 kW
            weight of the machine ca. 180 Kg
            dimensions of the machine ca. 0,75 x 1,05 x 1,3 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content
            but without digital display !!


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C KAMI FKM 350 PD / SK40


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76004 · Drilling and Milling M/C

          KAMI - FKM 350 PD / SK40 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 130 mm︱spindle taper SK 40 ︱spindle turning speed range 70 - 3200 U/min︱ 520 mm︱ 230 mm︱table surface area 730 x 210 mm︱connected load frequency 400 V︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,32 t︱dimensions of the machine ca. 1,1 x 0,9 x 1,15 m︱
          domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 130 mm
            spindle taper SK 40
            spindle turning speed range 70 - 3200 U/min
            520 mm
            230 mm
            table surface area 730 x 210 mm
            connected load frequency 400 V
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,32 t
            dimensions of the machine ca. 1,1 x 0,9 x 1,15 m
            Description :
            domestic equipments
            • Digital depth gauge
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 60


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76009 · Drilling and Milling M/C

          HBM - BF 60 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 230 mm︱bore stroke 125 mm︱spindle taper ISO 40 ︱spindle turning speed range 115 - 1750 U/min︱ 560 mm︱ 175 mm︱table surface area 1000 x 240 mm︱max. distance between table and spindle-nose 375 mm︱connected load frequency 400 V︱total power requirement 0,85/1,5 kW︱weight of the machine ca. 0,95 t︱dimensions of the machine ca. 1,3 x 1,2 x 2,1 m︱
          Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional.
            bore capacity in steel (diameter. 35 mm
            throat 230 mm
            bore stroke 125 mm
            spindle taper ISO 40
            spindle turning speed range 115 - 1750 U/min
            560 mm
            175 mm
            table surface area 1000 x 240 mm
            max. distance between table and . 375 mm
            connected load frequency 400 V
            total power requirement 0,85/1,5 kW
            weight of the machine ca. 0,95 t
            dimensions of the machine ca. 1,3 x 1,2 x 2,1 m
            Description :
            Domestic equipments:
            automatic feed and handwheel.
            Drill chuck with MK4 holder
            Digital depth display
            Left / right switch.
            Emergency stop switch
            Pivot head swiveling
            Spindle protection.
            Small toolbox

            Machine base and X-axis feed optional.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Drilling and Milling M/C HBM BF 30


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76015 · Drilling and Milling M/C

          HBM - BF 30 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 200 mm︱bore stroke 70 mm︱ 16 mm︱spindle taper MK3 ︱spindle turning speed range 50 - 3000 U/min︱ 220 mm︱ 425 mm︱table surface area 700 x 210 mm︱connected load frequency V︱max. distance between table and spindle-nose 470 mm︱total power requirement 1,5 kW︱weight of the machine ca. 230 Kg︱dimensions of the machine ca. 0,75 x 1,05 x 1,2 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content
            bore capacity in steel (diameter. 32 mm
            throat 200 mm
            bore stroke 70 mm
            16 mm
            spindle taper MK3
            spindle turning speed range 50 - 3000 U/min
            220 mm
            425 mm
            table surface area 700 x 210 mm
            max. distance between table and . 470 mm
            total power requirement 1,5 kW
            weight of the machine ca. 230 Kg
            dimensions of the machine ca. 0,75 x 1,05 x 1,2 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   


          A machining centre adds versatility to your business
          Machining Centre: a versatile tool for your metalworking needs

          Machining centres are multi-functional tools in the maching of solid materials usually metals. They are distinguished from other forms of cutting by the fact that the machining centre itself moves as opposed to the work piece. Machining centres also known as milling machines come in a variety of sizes from small models for home workspaces to large industrial models for factories. Find your next used machining centre at LagerMaschinen your source for quality used equipment.

          Enhance your business' efficiency with a machining centre

          The term 'machining centre' can be further subdivided into specific types of centres namely horizontal and vertical based on the orientation of the spindle. A vertical machining centre is usually best suited projects where intricacy and precision are required while horizontal machining centres offer operators a higher rate of production and output. Whether you're shopping as a hobbyist or a business owner you can find the right used machining centre for you from wide selection available at LagerMaschinen.

          Experiences the advantages of shopping at LagerMaschinen

          Buying used machinery online is a practical solution to time and budgetary concerns. When you browse LagerMaschinen's easy-to-use site you'll quickly see the many advantages to shopping for used equipment online. You can search from the comfort of your home or office sort your results by price location or model and best of all the wide selection of products available guarantees you'll find the perfect machining centre for your home or business. Save time and money at LagerMaschinen.


          Boring mills / machining centres / boring machines
          Find the best boring machines for your needs

          The term 'boring machines' includes a wide range of equipment used to create holes in a variety of different materials. Boring machines can come in large range of sizes as well. Small boring machines are perfect for wood workers or home hobbyists, while larger equipment is suited to industrial settings. Lathes, machining centres and boring mills all fall under the umbrella of boring machines. For the best selection of used boring machines, check out the best online machinery marketplace, LagerMaschinen.

          Which type of used machines is right for you?

          Boring mills and machining centres are amongst the most popular boring machines. They can be subdivided into two main categories based on the orientation of the boring bar. Boring mills and machining centres are known for their precision cutting techniques and are perennial industry favourites. Purchasing boring mills or machining centres doesn't have to cost your business a fortune. By investing in used machines online, you can get the quality you demand without breaking your budget.

          LagerMaschinen: the easiest way to find used machines online

          In today's economy, time and money are two of the most valuable assets we have. Making the most of both is advantageous for both businesses and individuals. If you're in the market for industrial machinery or even small-scale equipment for your home workshop or factory, why not consider investing in used machines. Shopping for used machines online at LagerMaschinen takes the hassle out of the browsing process. Find boring machines presses and drills quickly and easily using LagerMaschinen.